South Central Railway Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
South Central Railway - SCR Tender
Telecommunication Services
Ireps
Opening Date15 Nov 2024
Closing Date9 Dec 2024
Tender Amount₹ 19,46,39,075.82
Costs
EMD
₹ 11,23,200Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
(1) Macls Outdoor Works In Connection With Provision Of Distributed Electronic Interlocking At Guntakal Station (2) Macls Outdoor And Indoor Works By Providing
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
G-SG-CN-GTL-13-2024-DY. CSTE-C-GTL-S AND T/SOUTH CENTRAL RLYTender No
G-SG-CN-GTL-13-2024Tender Authority
South Central Railway ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Ladder for 3.5m post as per DRG.. No. SA 23150, S 2033 or latest. Item shall be inspected by RITES.
7
5226
36582
Supply of Surface Base 140mm dia. CLS post as per DRG.. No. S 2011/M. Item shall be inspected by RITES.
54
3476
187704
Supply of Metallic (MS) colour light Signal Unit. (a) 2 aspect complete as per DRG.. No. SA. 23003/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest. Item shall be inspected by RITES.
35
12998
454930
(b) 3 aspect complete as per DRG.. No. SA. 23002/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest. Item shall be inspected by RITES.
14
17623
246722
4 aspect complete as per DRG. No. SA. 23001/NM (Adv.) with latest amendment and specification IRS: S 26-64 or latest. Item shall be inspected by RITES.
5
18820
94100
Supply of Offset Bracket to suit 140mm dia CLS post with two numbers of U bolts and nuts complete. Item shall be inspected by RITES.
38
4938
187644
Supply of Calling On Signal Unit complete with U Bolts as per RDSO DRG. No. SA.24351 (Adv.) or latest. Item shall be inspected by RITES.
36
4740
170640
Supply of Ground type position light shunt signal complete with base, pipe, arrow mark and hoods as per RDSO DRG. No. SA 23840 or latest. Item shall be inspected by RITES.
40
6083
243320
"Supply of Post type position light shunt signal with hoods, arrow mark and offset bracket to suit 90mm sockets (CLS) with two numbers of 'U' bolts and nuts complete to fix shunt signal below main stop signal as per ROSO DRG. No. SA 23840 or latest". Item shall be inspected by RITES
27
3502
94554
Supply of Junction type / Direction type route indicator as per specification IRS:S 66-84 Amd. 1 or latest. (a) One way as per DRG. No. SA 23401. Item shall be inspected by RITES. 14
5
15187
75935
(b) Two way as per DRG. No. SA 23402. Item shall be inspected by RITES.
3
20490
61470
Supply of vitreous enamel coated board of 230mm dia. (A, P, G, C, IB markers) made of 2mm thick sheet as per following colour scheme: 1)'G' marker - Yellow back ground, black letters 2) Other boards - White background, black letters. Item shall be inspected by RITES.
50
267
13350
CHAPTER 2 - LOCATION BOX :: Supply of GKP type Location Boxes. (a) Full size as per drg. No. S&T/MFT/T.2378. Item shall be inspected by RITES. 17
270
16216
4378320
(b) Half size drg. No. S&T/MFT/T.2378. Item shall be inspected by RITES.
50
8083
404150
Supply of 'E'type lock of specified ward as per requirement with one key E-type lock to DRG. No.SA3376/M or latest and specification IRS: S30-64 or latest.Item shall be inspected by RITES.
12
1051
12612
Supply of relay fixing frame for full location box. The frame shall be of approximate size 940mmx150mm and made with powder coated MS angle of 25mmx25mmx 3mm. The frame shall have suitable holes to fix in full location box. Item shall be inspected by Consignee.
160
853
136480
Supply of Hylam sheet, resin bonded, grade P3 as per IS specification IS 2036 of 1974 or latest of following size: (a) Hylam Sheet of size: 2400mm x1200mmx6mm. Item shall be inspected by Consignee.
49
7124
349076
CHAPTER 3 - POINT MACHINE :: Supply of GI termination box (10 SWG) for point 21 machine of size 45 cmx23 cmx12 cm with double coat of enamel paint (outside: Black & inside: white) along with 2no's of MS angle of size 50x50x6mm of length 1000mm each, 2 numbers of 40mm GI pipe of length 450 mm & 150 mm with nuts/ washers and teak wood plank of size 40 mmx25 mm for fixing of terminals. Item shall be inspected by Consignee.
110
2902
319220
CHAPTER 4 - TRACK CIRCUIT :: Supply of Track feed battery charger to work on 110V AC for charging1or 2 or 3 or 4 lead acid cell of 80AH (10Amps) used in track circuit as per RDSO Specn. No. IRS.S.89/2013 Ver 1.0 latest. Item shall be inspected by RDSO.
162
8294
1343628
Supply of Track lead junction boxes fibre glass as per DRG.No.CWM-00597 of F.R.P 23 material to and specification IRS:S 23 along with fixtures i.e., one MS angle 50mmx50mmx5mm, 0.9m long, two numbers of G.I pipes of 25 mm dia, 500 mm long along with nuts and bolts and 500 mm long (grommet bushes, 60 mm ARA terminals-2 No's). Item shall be inspected by RITES.
880
1546
1360480
Supply of Galvanised Wire rope 6/19 steel, 6 mm dia with fibre core as per specification IS 3459/2004 or latest. Item shall be inspected by Consignee.
1050
80
84000
Supply of B type chokes to as per specification IRS: S65- 83 Amd.1 or latest. Item shall be inspected by RDSO.
324
2313
749412
Supply of Stationary low maintenance secondary lead acid cells as per RDSO specification IRS: S88-2004 or latest. This includes supply of inter cell connectors, bolts, nuts, acid level indicating floats and vent plugs. (a) 2V, 80AH. Item shall be inspected by RDSO.
-
-
26
Supply of Hydrometer as per IS:3104 (Part-II)-1982 or latest. Material shall be inspected by Consignee
14
277
3878
Supply of Distilled water for topping of secondary cells as per specification IS 1106 or latest. Item shall be inspected by Consignee.
1650
10
16500
Supply of Track Feed Regulating Resistance disk type 0 to 30 as per DRG. No. SA 20161 66/M or latest. To be procured from RDSO approved firms. Item shall be inspected by consignee.
162
358
57996
CHAPTER 5 - RELAYS (Relays-Metal to Carbon) :: Supply of Plug-in type miniature 30 tractive armature Non-AC immune, DC neutral line relay complete with plug board, retaining clip/ATC Clip and connectors as per specifications BRS 930, IRS:S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd.6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). (a) QN1- 8F/8B, 24 V DC. The interlocking code: ABCDF. Item shall be inspected by RDSO.
520
4400
2288000
(b) QN1-12F/4B, 24 V DC. The interlocking code: ABCDE. Item shall be inspected by RDSO.
520
4283
2227160
(G) QNN1-4F/4B, 24 V DC, The interlocking code: ACEHJ. Item shall be inspected by RDSO.
140
4944
692160
Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete 33 with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34- 68 Amd. 6 or latest, IRS: S 60-78 Amd. 1or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). (a) QBCA1- 2HF/4B, Interlocking code: BCEJK as per specifications BRS 943 or Latest. Item shall be inspected by RDSO.
180
8307
1495260
(b) QNA1- 8F/8B, Interlocking Code: ABDGH as per Spec BRS 931 A or Latest. Item shall be inspected by RDSO.
600
4738
2842800
(c) QNA1-12F/4B, DC Neutral Line Relay, Interlocking Code: ABDFH as per Spec BRS 931 A or Latest. Item shall be inspected by RDSO.
550
4413
2427150
(d) QNA1K-6F/6B, Interlocking Code: CDEKY as per Spec BRS 931 A or Latest and RDSO letter No.STS/E/Relays/UEA (PI) dated 30/05/97 (Annexure-II). Item shall be inspected by RDSO.
175
5062
885850
(e) QSPA1- 8F/4B, The interlocking code: ABDEJ, Spec BRS 933A or latest. Item shall be inspected by RDSO.
162
6465
1047330
Supply of AC immune, plug-in type, Style 'QTA2', 2F/1B DC Neutral track relay for 38 railway signalling track circuits with coil resistance 9 ohm, complete with plug board, retaining clip and connectors as per specifications: BRS 939A & 966 or Latest, IRS:S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable) with interlocking code FGHKX. Item shall be inspected by RDSO.
162
4806
778572
Supply of ECR 4F/4B' for 110V AC lit LED signals, complete with plug board, retaining 39 clip and connectors as per RDSO specification No.STS/E/Relays/AC Lit LED Signal/09-2002 Amd. 1 or latest, BRS 941A, IRS: S 23-88 Amd. 1 or latest, IRS: S34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). The interlocking code for this unit shall be ABDHK (with ATC clips). Item shall be inspected by RDSO.
377
5841
2202057
Supply of Failsafe electronic flasher device 24V DC, 3A as per RDSO specification RDSO/SPN/173/2002 Amd. 2 or latest. Item shall be inspected by RDSO.
2
4349
8698
CHAPTER 6 - RELAY RACKS, TERMINAL BLOCKS AND FUSES :: Supply of powder coated 41 Relay scaffolding, stainless steel nuts and bolts for fixing the rack, supporting angles, frame mountingrack universal type as per DRG. No. S&T/MFT/291. The relay rack shall be supplied with triangle base with 'J' bolts, insulation of required numbers and suitable inner frames to suit Q style relays / K50 pre wired tag blocks. (a) 1 Way. Item shall be inspected by Consignee. 42
7
7474
52318
(b) 2 Way. Item shall be inspected by Consignee. 43
2
14847
29694
(c) 4 Way. Item shall be inspected by Consignee.
1
27712
27712
Supply of powder coated Cable termination rack of size 880mm x 2075mm made using 50mm x 50mm x 6mm (6mm thickness) MS angles. The cable termination rack shall be supplied with 44 stainless steel nuts and bolts for fixing the rack, tripod bases and reel insulators (for K rack, P rack and power rack), cable ladder of 400mm width and 2075mm length with two angles of size 40mm x 40mm x 5mm (5mm thickness) and supporting flats of size 25mm x 25mm. Suitable holes shall be drilled to fit hylam sheet as per standard practice. Item shall be inspected by Consignee.
49
7585
371665
Supply of Terminal Block (a) Terminal block: 1 way Poly butylene Terephthalate (PBT) 45 of size 60mm (link centre to centre) as per RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. Item shall be inspected by RDSO.
4000
97
388000
(b) Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre 46 to centre) as per RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. Item shall be inspected by RDSO.
6000
406
2436000
(C) Supply of modular terminal block (WAGO or similar) as per RDSO specification RDSO/SPN/189/2004 Ver. 3.0 or latest consisting the following parts: (a) 2 conductor disconnect 47 terminal block - 6 numbers (b) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 number c) Screw less end stop similar to WAGO Model No. 249-117 - 2 numbers (d) Insulated jumper WAGO Model 280-402 - 5 numbers (e) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set). Item shall be inspected by RDSO.
2450
703
1722350
Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos. Item shall be inspected by Consignee.
40
64
2560
Supply of non-deteriorating type of fuse holders and fuse links 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) (A) Fuse holder 20A capacity. Item shall be inspected by RDSO.
1600
220
352000
Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge. Item shall be inspected by RDSO.
2200
31
68200
CHAPTER 7 -WIRES & CABLES :: Supply of 60 core Indoor Cable with 0.6mm conductor diameter as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Item shall be inspected by RDSO.
4
191009
764036
Supply of PVC insulated Wire Coils: (a) Multi-strand, single core, copper conductor 52 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge.(Red-250,Block-250). Qty to be read as "Coil" . Item shall be inspected by RDSO.
670
1153
772510
(b) Multi-strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 53 0.30mm) flexible wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge.(Red-35,Block-35,Green- 15). Qty to read as "Coil" . Item shall be inspected by RDSO.
120
2908
348960
(c) Supply of 35 Sq.mm PVC insulated multi-strand, single core, copper conductor 54 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100-meter coil. Colour to be specified by Engineer in charge. Item shall be inspected by RITES.
2700
391
1055700
(e) Supply of 10 Sq.mm PVC insulated, multi-strand, single core, copper conductor 55 140/0.3 (140 wires, diameter of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3or latest. Cable to be supplied in 100 meter coil.(Green-1000,Red-2500,Block-2500). Material shall be inspected by RDSO
7000
124
868000
CHAPTER 8 - POWER SUPPLY AND EARTH LEAKAGE DETECTOR :: Supply of Battery Charger of Various capacity (a) 230V AC / 110V DC, 30A single phase, signalling / telecom. Installation as per specification IRS: S 86-2000 Amd. 4 or latest. Item Shall be inspected by RDSO.
7
110464
773248
Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest. (a) Transformer-rectifier set with 110V AC input, 24V-30V DC output, 1A. Item Shall be inspected by RDSO.
7
19470
136290
(b) Transformer-rectifier set with 230V AC input, 24V-30V DC output, 5A. Item Shall be inspected by RDSO.
6
25960
155760
Supply of Earth Leakage Detector (ELD) with configuration specified by Engineer In 59 charge and as per specification RDSO/SPN/256/2002 or latest with insulated tester, test probes, Mounting stand and Fuse board to isolate from distribution board as per requirement of channels. (c)Twelve channel Earth Leakage Detector. Item Shall be inspected by RDSO.
7
190261
1331827
CHAPTER 9 - DOMINO PANEL AND DATALOGGER :: Supply of Data Logger of following 60 capacity for remote monitoring of signalling parameters and power supply arrangements with network as per specification IRS: S 99- 2006 Amd. 3 or latest with 64 input digital card as a spare and fuse monitoring PCBs for monitoring at least fifty 2A fuses with inbuilt modem cards for networking. (b) Data Logger with 1024 digital inputs and 32 analog inputs. Item Shall be inspected by RDSO.
7
623709
4365963
Power supply and communication for RTU. (d) Supply of 4 wire leased line modem. Item shall be inspected by Consignee.
3
53172
159516
Supply of communication and other accessories for Datalogger (g) Supply of Protocol Converter for Electronic Interlocking including software required for networking. Item shall be inspected by Consignee.
2
49373
98746
Supply of 80 column Dot Matrix Printer Model No. Epson LQ300/LX300 or similar with serial port. Item shall be inspected by Consignee.
7
13177
92239
Supply and installation of Fault analysis terminal for analysis of fault and generating reports for data logger installed at stations with minimum 19 inch display terminal with i5 processor 4GB RAM, HDD 1 TB, Windows 10 Licensed or better. Item shall be inspected by Consignee.
2
66716
133432
Supply of Safety Point Alarm unit to alert ASM to set the points against the blocked line. Qty to be read as "Per Station". Item shall be inspected by Consignee.
2
69582
139164
CHAPTER -10 - TELECOM EQUIPMENT :: Supply of Thermo shrink jointing kit for jointing underground 0.9mm dia conductor 6 quad cable as per specification IRS: TC 77-2012 Rev. 3 (Amd. 1 to Amd. 3) or latest. Item shall be inspected by RDSO.
50
3715
185750
Supply of Various Telephones and Telephone Power Supply unit 4 wire train traffic control equipment with DTMF signalling way station equipment and way station control telephone as per specification IRS : TC 60-2007 Amd. 1 or latest. Item shall be inspected by RITES.
10
5617
56170
"LC Gate: Station Electronic Telephone unit for LC Gate, along with surge protection and line connection unit as per specification No.RDSO/SPN/TC/51-2021 Rev. 1.0 or latest." Item shall be inspected by RITES.
1
6222
6222
(g)"LC Gate: Gate Electronic Telephone unit for LC Gate, along with surge protection and line connection unit as per specification RDSOISPN/TC/51-2021 Rev. 1.0 or latest." Item shall be inspected by RITES.
1
5113
5113
(h)"LC Gate: Centralised power supply system with battery for Station and Gate Telephone." Item shall be inspected by RITES.
1
5992
5992
(c)Desk type 2 wire, 12 way DTMF selective calling group telephone (Selective Calling / 71 Group Telephone) complete as per specification IRS: TC 80-2000 Amd. 1 or latest with suitable power supply unit. Item shall be inspected by RITES.
34
6282
213588
Supply of Various Telecom Cable (b)Switch board cable 10 Pair / 0.6mm dia. as per TEC 68080:2002 or latest. Item shall be inspected by Consignee.
2500
35
87500
(c) Switch board cable 20 Pair / 0.6mm dia. as per TEC 68080:2002 or latest GR WIR 0603 March 2002 or Latest. Item shall be inspected by Consignee.
2500
88
220000
(d) 50 Pair cable of 0.5mm dia, polythene insulated, polythene sheathed, jelly filled 74 underground telephone cable with poly aluminium moisture barrier, annealed copper conductor, polythene jacketed double steel tape armoured as per specification IRS: TC 41/97 Amd. 3 or latest. Item shall be inspected by Consignee.
2500
304
760000
(g)UTP CAT 6 Cable (Roll is 305 Mtr) of D.LINK/AMP/KRONE or similar make. Item shall be inspected by Consignee.
2500
37
92500
Supply of Krone Termination Box complete with mounting Krone termination of 100 pair. Item shall be inspected by Consignee.
15
3740
56100
Supply of VF Transformer and accessories :: (a) Supply of VF Transformer with impedance ratio 470 : 600 ohms or 1120 : 600 (Type 4) or 1120 : 470 (Type 3) as per specification IRS : TC 22-76 or latest.(Cylindrical). Item shall be inspected by Consignee.
40
909
36360
Supply of VF Transformer 2T assembly of type 2 with impedance ratio 470: 1120 ohms as per specification IRS: TC 76 -2000 with Amd. 1 or latest.(Cylindrical). Item shall be inspected by Consignee.
150
999
149850
Supply of Emergency Socket Box and emergency socket pin Supply of emergency 79 socket box of FRP material as per specification RDSO/SPN/TC/44/2002 Ver. 3.0 with Amd. 1, 2,3, Corrigendum 1 or latest, DRG. TCDO/RE/001/2002 Ver. 0.1 or latest, TCDO/RE/001/2002/1 with socket six pin flat. Item shall be inspected by RITES.
2
5195
10390
(b)Supply of emergency socket six pin flat with 6 pin suitable plug as per specification IRS: TC 42-87 with Amd. 1, 2, 3 or latest. Item shall be inspected by Consignee.
2
389
778
Supply of Maintenance Free Batteries of following capacity of AMARAJA/EXIDE/Panasonic or equivalent brand. (c)12V/100 AH. Item shall be inspected by RDSO.
2
11167
22334
Supply of OFC Related items : (a) Supply of Permanently lubricated HDPE Duct with 82 outer diameter of 40mm and inner diameter of 33mm as per specification RDSO/SPN/TC/45/2013 Revision 2.0. The length of the duct shall be 1km. Two end plugs shall be provided along with the drum. Item shall be inspected by RDSO.
17
66223
1125791
(b)Supply of Plastic couplers - Slip fit / push type for permanently lubricated HDPE duct. Item shall be inspected by Consignee.
34
85
2890
(f) Supply of appropriate OFC patch cords (1.5 meter long) as per direction of Engineer 84 In charge, having insertion loss less than or equal to 0.1dB as per Telecommunication Engineering Centre (TEC) standard TEC 87070:2009 with GR TEC/T/OFC- OFJ/155/2013 or latest. Item shall be inspected by Consignee.
60
1770
106200
(g) Supply of OFC integrated access with following specifications: (1). The device shall be of 1U or 1.5U height and shall be mountable in 19" rack (2). The evice's optical module shall be integrated in the unit and shall support dual core OFC. (3). The device shall have four 100 Mbps Ethernet ports for urveillance / smoke detectors. (4). The device shall support an optical distance of up 85 to 40km. (5). The device shall support six 2 Wire / 4 Wire ports (each port shall be configurable) to support axle counter / UFSBI / control phone / EC / RTU applications, one TELNET / SNMP port, two RS232 ports and four otential free contacts. (6). The device shall support dual DC power supply from 18V DC to 72V DC. (7). The device shall support auto changeover feature on E&M interfaces from copper (quad cable) to optic medium (OFC) and vice versa. (8). The device shall have programmable option as required for each port. Item shall be inspected by RITES.
4
240421
961684
(h) Supply of Core Alignment Fusion Splicing Machine of model Fujikura 88S+ or Similar TEC Spec TEC/GR/OSM-01/04/SEP- 12 or latest. Item shall be inspected by Consignee.
2
259600
519200
(i) Supply of smart OTDR (35/37 DB) as per specification TEC/GR/TX/OTD-002/04/AUG- 19 of Viavi of 100A series or Similar. Item shall be inspected by Consignee.
2
175230
350460
(j) Supply of Laser Source meter as per specification no.TEC/GR/TX/OPM-001/04/NOV- 13 of model Viavi OLS 35 or similar. Item shall be inspected by Consignee.
2
88783
177566
(k)Supply of Power meter as per specification TEC/GR/TX/OPM- 001/04/NOV-13 of model Viavi OLS 35 or Similar. Item shall be inspected by Consignee.
2
32645
65290
(a) Supply of Miscellaneous Telecom Items Supply of 2-conductor disconnect / test 90 terminal blocks (WAGO) or similar with pivoting knife disconnect and test port as per specification RDSO/SPN/189/2004 Ver. 3.0 or latest. WAGO Model No. 280-870 or similar. Item shall be inspected by Consignee.
1200
52
62400
(b) Supply of 3 in 1 modular crimping tool for RJ45, RJ11, CAT-5/ CAT-6 Ethernet cable cutter crimping tool IMP make of Standard, D-Link, i-Ball, Belkin, Tech NXT, Fluke or Terabyte make. Item shall be inspected by Consignee. 92
2
574
1148
(c) Supply of single line RJ11 Rosette box. Item shall be inspected by Consignee.
15
32
480
(d) Push button corded auto telephone with Caller ID facility of Beetel, Panasonic or Binatone make. Item shall be inspected by Consignee.
8
1495
11960
1011-(e)Supply of Ethernet to E1 Converter (Ethernet port to G.703) with four Ethernet ports to one E1. The converter shall have the provision of dual AC / DC power supply. Item shall be inspected by Consignee.
3
47074
141222
CHAPTER 11 - MECHANICAL SIGNALING ITEMS :: Supply of Electric Key Transmitter 95 (EKT) rotary type complete as per DRG. No. SA 22601/Alt 4 or latest and specification IRS: S 21-2001 Rev. 1.0 or latest. The ward number shall be as specified by the Engineer in-charge. Item shall be inspected by RDSO.
35
7027
245945
CHAPTER 13 - BLOCK AND IB RELATED ITEMS :: Supply of Filter Unit for use in conjunction with block instrument as per specification IRS: S 68-89 or latest. Item shall be inspected by Consignee.
2
15500
31000
Supply of Block Bell Equipment as per specification IRS: TC 44-88 with Amd. 1 or latest. Item shall be inspected by Consignee.
2
2604
5208
Supply of Teak Wood Block Counter suitable for DAIDO / NBT block instruments as per standard drawing. & instructions of engineer in charge.
3
14721
44163
CHAPTER 14 - DIGITAL AXLE COUNTER RELATED ITEMS :: Supply of Spare Cards for 99 High Availability Single Section Digital Axle Counter (HASSDAC) as per specification RDSO/SPN/177/2012 Ver. 3.0 or latest. The spare cards shall be supplied as per the make of SSDAC and to the version as specified by the engineer in-charge. (a) Signal Conditioner Card or Phase Detection Card for HASSDAC. Item shall be inspected by Consignee.
2
41220
82440
(b) Signal Conditioner Card or Phase Detection Card for HASSDAC. Item shall be inspected by Consignee.
2
41141
82282
(c) Modem Card or Communication Card for HASSDAC. Item shall be inspected by Consignee.
2
41141
82282
(d) Dual micro controller logic card or CPU Card for HASSDAC. Item shall be inspected by Consignee. 103
2
110256
220512
(g) Axle detectors (each set consists of 2 numbers Tx and 2 numbers Rx coils). Item shall be inspected by Consignee.. 106
2
55951
111902
Supply of Tool kit consisting of the following : (a) Digital multi meter - Model 187 of Fluke make or Model Rish 18S of Rishabh Make or similar suitable for Digital Axle Counter. (b) Train simulator (c) Extender card (d) Dummy Wheel (e) Square Drive T Handle - Model 1733 of Taparia Make (f) 19mm, 3/8 inch square drive socket made of Chrome Vanadium steel - Model 19H of Taparia make 107 or similar. (g) Ring Spanner (Flat) of size 17 x 19mm - Jhalani Make or equivalent. (h) Double ended open jaw spanner no. 895 (Deflector plates) (i) Spanner of size 17 x 19mm - Jhalani or Everest or Taparia Make. (j) spanner of size 19 x 24mm - Jhalani or Everest or Taparia Make. (k) Ring Spanner of size 24 x 26mm - Jhalani or Everest or Taparia Make. (l) Screw Driver No. 902 - Taparia Make or equivalent. (m) Screw Driver No. 935 - Taparia Make or equivalent. (n) Carrying bag for tools. Item shall be inspected by Consignee.
2
133197
266394
Electronic earth tester Model No. 4680B Meco make or higher version or similar. The 108 earth tester shall be non-contact type without requirement of auxiliary electrodes and shall have 4 digit 9999 LCD display with ground resistance range from 0.25 to 1500. Item shall be inspected by Consignee.
3
83799
251397
CHAPTER 15 - EARTHING RELATED ITEMS :: Supply of basic material to construct unit Maintenance Free Earth as per specification RDSO/SPN/197 Ver. 1.0 or latest consisting of the following: (a) Copper bonded steel electrode 3m long, 17mm diameter with copper bonding thickness 109 mini 250 micron and UL listed and marked - 1 No. (b) Earth enhancement compound of RDSO approved brand supplied in sealed bags of minimum 10kg - 3 Nos. (c) Copper strip with dimensions 150 x 25 x 6mm to erminate earth rod - 1 No. (d) Copper strip with dimensions 300 x 25 x 6mm Main Equi- potential Earth Bus bar (MEEB) - 1 No. (e) Copper strip of with dimensions 150 x 25 x 6mm Sub Equi- potential Earth Bus bar (SEEB) - 1 No. (f) 35 Sq.mm multi-strand PVC insulated Copper Cable (15 meter). Item shall be inspected by RITES.
55
16837
926035
Supply of 50mm x 6mm GI tape for interconnecting earth electrodes. Item shall be inspected by Consignee.
200
546
109200
Real time Earth measuring Device of split core structure, High Accuracy, Resistance Range 0.01 100, Detector Light and Sound Alarm, IP-54 protection, RS-485 Communication, with 111 extended 4 digit LCD of Koble or Similar make (Model No. KOBLE 2800KB VER 3.0 or similar) : (a) Main detector Unit -01 No (b) LCD Enclosure fitted with Aviation Plugs - 01 No. (c) Rs-485 Connector with 0.5 Mtr Cable-01 No. (d) RMCU with PFC -01 No. (e) All other connecting cables with accessories. Item shall be inspected by Consignee. 112
2
65725
131450
CHAPTER 17 - STATIONARY AND MISCELLANEOUS ITEMS :: Supply of piezo buzzers working on 24 V DC reputed make. Item shall be inspected by Consignee.
30
78
2340
Supply of PVC Conduit pipe 3m length, 25mm dia with required number of bends. Item shall be inspected by Consignee.
400
51
20400
Supply of Lugs and Eyelets: (b) Copper lugs 10sq.mm of reputed make. Item shall be inspected by Consignee.
1500
12
18000
(c) Copper eyelets to suit 16/0.2 wire Dowell's or similar make. Item shall be inspected by Consignee.
3500
3
10500
(d) Copper eyelets to suit 10.sqmm wire Dowell's or similar make. Item shall be inspected by Consignee.
1300
6
7800
Supply of Corium Z 105 Battery cleaner and terminal conditioner of 500ml tin can. Item shall be inspected by Consignee.
8
5274
42192
Supply of Solid State Buzzers with different frequencies in metallic / plastic casing working on 12V - 24V - 60V. Item shall be inspected by Consignee.
25
300
7500
Supply of Universal Locks with one steel key for every ten locks or part there of (For 121 example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19). Item shall be inspected by Consignee.
800
195
156000
Supply of Electric Track Drilling machine shall be suitable for operating on 110V, 50Hz 122 AC / DC fully insulated and no-load RPM shall be 1900 / 1000 and the power input is 550W. Machine with suitable inter changeable track mounting stand and drilling to be designed with adjustable facility and along with a set of 20 no's of 7.2 mm dia Bosch MSS drill bit, Drill check dia. 13 mm and drilling dia in steel 8 mm/13 mm along with packing accessories. Item shall be inspected by Consignee
2
22602
45204
Supply of following items for Station:: (a) Supply of Feather lite table of Model No. V-MT 1890 & V- 2D+1F or similar. Item shall be inspected by Consignee. 124
8
29573
236584
(b) Supply of Godrej CH7 model or similar Item shall be inspected by Consignee. 125
15
4018
60270
(c) Supply of Godrej PCH5d13R model or similar Item shall be inspected by Consignee. 126
15
5516
82740
(e) Supply of Godrej shelf storage of 916 x 486 x 1981 mm or similar. Item shall be inspected by Consignee.
4
26479
105916
(f) Supply of steel stools 18" height neatly finished and painted. Item shall be inspected by Consignee.
22
489
10758
(g) Supply of Fibre table of 4 Feet x 2 Feet one number and fibre chairs two numbers. They should be of standard make and quality like Neelkamal or Similar. Item shall be inspected by Consignee.
5
2099
10495
(i) Supply of HDPE jerry can of 20 litres capacity. The jerry can shall be supplied at site as per the requirement of site in- charge. Item shall be inspected by Consignee.
12
154
1848
(i) Supply of Godrej Navtal Locks with diameter of 50mm with 3 keys. Item shall be inspected by Consignee.
80
563
45040
(k) Supply of key chains with ring and plastic name plate of dimensions 60mm x 20mm x 3mm. The plastic name plate shall be engraved with station name on one side and key particulars on the other as specified by the site in-charge. Item shall be inspected by Consignee.
140
34
4760
(m) Supply of Aluminium Step ladder of 5 feet height of Bathla make or similar. Item shall be inspected by Consignee.
7
9122
63854
(n) Supply of Electrostatic Rubber Matting of thickness 2mm as per IS-15652/2006 with suitable adhesive material. Item shall be inspected by Consignee.
140
2390
334600
(o) Supply of Alkosign felt notice board of size 4' x 3' with glossy fibre doors having locking arrangements. Item shall be inspected by Consignee.
2
9281
18562
(q) Supply of Printer for maintenance terminal at station - HP LaserJet 1020 Plus or similar. Item shall be inspected by Consignee. 137
5
16135
80675
Printing, binding and supply of the following Registers with latest proforma as given by engineer in-charge. Each register shall be of 100 pages. 1) Station Asset Register 2) Deficiencies 3) Officer Inspection Book 4) Station Message Book 5) Infringement Measurement Book for Signaling Assets 6) Route Cancellation Register 7) Relay Room Key Register 8) Selection Circuit Testing Register 9 ) Cable Testing Register 10) Signal Maintenance Record 11) Battery Maintenance Register 12) 140 Mechanical Signaling Register 13) Axle Counter Maintenance Register 14) SSDAC / HASSDAC/ MSDAC Maintenance Register 15) Block Instrument Maintenance Register 16) Track Circuit Maintenance Register 17) Mechanical Lifting Barriers Maintenance Register 18) Electrical Lifting Barriers Maintenance Register 19) Electrically Operated Point Maintenance Register 20) Electronic Interlocking Maintenance Register 21) Location Box Maintenance Register 22) Earth Testing Record Register 23) Joint Inspection of Points and Crossings Register 24) Joint Inspection of Track Circuits 25) Joint Inspection of Track Circuits with OHE 26) Diesel Generator / Solar Panel Register 27) UFSBI maintenance register "Qty to be read as Per Regr." "Item shall be inspected by Consignee."
160
358
57280
Supply of Tool Kit as under - (Ref : PCSTE/SC's Lr.No. SCR-HQ0SNT(SGPC)17/2020(e- 67555) dt. 13-09-2024) 1. Digital Multi meter true RMS meter RISHB 6016 or similar 2. Insulated Screw Driver (Taparia make No.933) - 1 No. 3. Screw Driver (Taparia make No.9361) - 1 No. 4. Screw Driver (Taparia make No.8221) - 1 No. 5. Screw Driver (Taparia make No.8241) - 1 No. 6. Cutting Plier 6" (Taparia make) - 1 No. 7. Nose Plier 6" (Taparia make) - 1 No. 8. Wire Stripper (Taparia make) - 1 No. 9. Fiber taper 3 meters - 1 no. 10. Scale 12" (for tongue rail opening) - 1 No. 11. Hacksaw frame with balde 6", 4" width (for cutting cable ) -1 No. 12. Universal key - 1 No. 13. Insulated Box Spanner for 6 way terminal (13mm) (for opening ARA terminals) - 1 No. 14. Double end insulated spanner 10x11mm - 1 No. (For SGE double line Block Instrument termination block & battery terminals) - 1No. 15. Double end insulated spanner 13x12mm - 1 No. (For TLD Boxes & battery terminals) - 1No. 16. Double End 141 Insulated Spanner 16x17mm - 1 No. (For TLD Boxes) 17. Double End Insulated Spanner 18x19mm - 1 No. (For BPAC coils CEL) 18. Nylon Brush (For cleaning purpose) - 1 No. 19. Voltage tester - 1 No. 20. Clamp meter True RMS for measuring AC/DC current - 1 No. (UNIT-T make) 21. Ring Spanner insulated 36x32 - 2 No. 22. Standard Chisel - 1 No. 23. Pocker 24. Punch 25. Tri colour LED Torch light (battery) - 1 No. 26. 36-48 De insulated spanner for TWS - 1 No. 27. Sealling plier 28. Allen Key set 29. 32mm Taparia bit with Handle 30. TSR meter 31. Tool Bag 32. Standard Tool Bag (CANVAS) - 1 No. 33. Insulated Double end spanner 30x32 taparia make 1 No. 34 Insulated Double end spanner 32x36 taparia make 1 No. 35. Insulated Single end spanner 50 taparia make 1 No. Throw Spanner 36. Hammer 3.0 lbs - 1 No. 37. Chisel 6" (for cutting bond wire) - 1No. 38 Pocker 8" (for removing bond wire, bond pin) - 1 No. 39 Screw Driver Heavy duty 12" with plastic handle (for opening of detector contacts - Taparia make) - 1 No. 40. Test Piece (Pt wedge piece) - 2 No. 41. Booden Block (60mm x 60mm) to provide between tongue & Stock rails during maintenance - 1 No. 42. Feeler Gauge - 1 Set. Note : Material shall be inspected by Consignee
3
46332
138996
(b) Supply of true RMS 5 digit 60000 counts digital multi meter with the following specification. 1. Frequency range - 6Hz to 1MHz mV AC. 2. Bandwidth - 10kHz. 3. AC voltage range - 1mV - 1000V, ± 0.5%. 4. DC voltage range - 1μV - 1000V, ±0.05%. 5. AC current range - 1μA - 10A, ± 142 0.5%. 6. DC current range - 1nA - 10A, ± 0.2%. 7. Capacitance range - 1pF - 10000μF. 8. Data logging - 32000 Readings. 9. Dual display - Available. 10. Other features - Shall have temperature measurement, diode, continuity, duty cycle measurement, self battery voltage measurement, low pass filter, Min, Max and Average value recording, back light, bar graph, protective rubber holster. "Item shall be inspected by Consignee."
3
15157
45471
(c) Supply of Clip On Meter of Model Fluke 317 or similar with the following specification. 1. True RMS responding. 2. Voltage - DC 600V, AC 600V, DC accuracy - ±1% + 4 digit. 3. AC accuracy - ±1.5% + 5 digit 4. Current - DC 600A, AC 600A, AC accuracy: - ±1.5% + 5 counts, AC / 143 DC current measurement. 5. Unique 40A low frequency measurements capability with 0.01A resolution. 6. Special filter circuit to enable accurate measurement of PWM output. 7. Additional measurement of resistance 8. Continuity check feature 9. Data hold features with large, easy to read backlight display. 10. Calibration certificate 11. 1 year warranty "Item shall be inspected by Consignee." 144
5
20086
100430
(e) Supply of pH / TDS meter of reputed make like Wasser Professional or similar. TDS meter shall have professional grade titanium electrode with auto temperature correction for higher accuracy. Item shall be inspected by Consignee.
7
999
6993
(g) Supply of Analog Insulation Tester of model No. Meco MC 941 or similar- 500V/1000 M Ohms. Item shall be inspected by Consignee.
5
4961
24805
(h) Supply of Analog Earth Tester of WACO make or similar along with test kit and leather case or similar Item shall be inspected by Consignee.
2
5884
11768
"Supply of Double Walled Corrugated (DWC) HDPE duct of various diameter of length of 149 6m as per specification RDSO/SPN/204/201 I Ver. 1.1 Amd. 1 or latest. The duct shall be supplied along with push-fit type 0-ring coupler or end cap" (a) DWC of outer Diameter 63mm and inner Diameter 50mm Item shall be inspected by CONSIGNEE.
80
875
70000
(b) DWC of outer Diameter 180mm and inner Diameter 153mm No. 3827. Item shall be inspected by RITES.
400
3827
1530800
(c) DWC of outer Diameter 250mm and inner Diameter 217mm. Item shall be inspected by RITES.
80
6561
524880
Supply of HDPE pipe of various diameter with material grade PE 100 as per specification IS Specification 4984: 1995 up to latest amendment. (a) HDPE pipe of 110mm Dia. Item shall be inspected by RITES.
2000
358
716000
Supply of Cable Route Locator set consisting of receiver with active line trace frequency, passive line trace and depth measurement on active line tracing with 5 watts cable line 153 transmitter with frequency indicator, power indicator, frequency mode sheet, power 'ON' & 'OFF' indicator mode toggle induction mode. High voltage warning and suitable rechargeable cells for both transmitter and receiver with suitable charger with carrying case. Make RIDGID SeekTech SR-20/ Stanlay ST-Loc 10 or equivalent or better as approved by Engineer In charge. Item shall be inspected by Consignee.
2
377600
755200
Supply of portable Cable Fault Locator (Metallic Time Domain Reflectometer) suitable in 154 RE / Non-RE Railway territory with all accessories for locating faults such as loop and break in various twisted pair cables such as underground telecom quad cables, signalling cables, telephone jelly filled cables, LAN etc. Instrument to be supplied with protective nylon carrying bag and Operator's manual. Item shall be inspected by Consignee.
2
317822
635644
CHAPTER 18 - UFSBI RELATED ITEMS :: Supply of Spares and accessories for UFSBI (a) Input card compatible with existing UFSBI system. Item shall be inspected by RDSO.
2
13424
26848
(b) Output card compatible with existing UFSBI system Item shall be inspected by RDSO. 157
2
34198
68396
(d) Control & Communication card compatible with existing UFSBI system. Item shall be inspected by RDSO. 159
2
25233
50466
(e) MODEM compatible with existing UFSBI system Item shall be inspected by RDSO. 160
2
28878
57756
(f) DC-DC Converter (Hot standby Type) Item shall be inspected by RDSO. 161
2
48000
96000
(h) Mother board compatible with existing UFSBI system fitted in 6-U Rack. Item shall be inspected by RDSO. 163
2
54634
109268
(l) Supply of MODEM compatible with existing UFSBI system to work on backup media 165 (either VF-channel on OFC P/Mux or 2 MBPS E1 channel from STM or direct dark single mode 1- Core, optic fiber cable up to 30 Km distance). The required type must be mentioned while ordering. Item shall be inspected by RDSO.
3
78970
236910
(l) Supply of Industrial grade E1 Modem (with 1+1 hot standby E1 uplink) for UFSBI with 166 6 no. of RS232 & 8 nos. E&M VF channel (individually configurable to 2/4 wire by simple hardware switch) suitable for connecting UFSBI Block along with UP & DN Line HASSDAC and 100% spare channels. Working on dual DC 24/48 Volts supply in hot-standby mode. Item shall be inspected by CONSIGNEE
2
204130
408260
(m) UFSBI Block Telephone (Complete with PTT Handset). Item shall be inspected by RDSO.
2
6308
12616
(n) Automatic media changeover of Modems working on redundant channels for data transmission on OFC/Quad compatible with existing UFSBI. Item shall be inspected by CONSISGNEE
3
35326
105978
"Supply of the following resistors I condensers I diodes. a) 50V, 470pF electrolytic 169 capacitor -20 Nos. b) 50V, 1000pF electrolytic capacitor -20 Nos. c) 50V, 2200pF electrolytic capacitor- 20 Nos. d) 1000, lOW wire wound resistance -20 Nos. e) BY127 diode - 10 Nos. f) PVC Insulation tapes of 25m length -25 Nos." "Item shall be inspected by Consignee."
4
3766
15064
Location survey for cable route and preparation of tentative cable route plan as per the instructions of Engineer in- Charge.
-
-
1
Excavation of trench, including marking of cable alignment, clearing of jungle, roots of 2 trees, bushes, trial pits if required, refilling with excavated soil, ramming and consolidation after laying of cables complete to the finished item of work in all type of Soil including soft rocky area as per RDSO Sketch No. SDO/CABLE LAYING/003, as directed by engineer in- charge. (a) Depth of 1200mm and width of 300mm. 3
22
-
2172500
(b) Depth of 600mm and width of 600mm
-
-
987500
Cutting of Rock, concreting after cable laying with 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size and curing of concrete to the required number of days, except in 4 bridges, culverts, level crossings, track crossings, cable pits and rocky soil including marking of cable alignment, clearing of debris etc., complete to the finished item of work as directed by engineer in- charge. All the material is to be arranged by contractor (a) Depth of 300mm and width of 300mm where rock is visible from surface, concreting to ground level as per Drg No.SK/CN/NEW/1.
800
679
543200
Digging of cable trench to a depth of not less than 30 cm in rocky terrain/difficult terrain Concreting the trench with 150mm thick concrete with 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size. All the material is to be arranged by contractor.
2200
188
413600
Track crossing/ Road Crossing by Horizontal Boring method at culverts/track/pucca road as per SCR Drg. No. 5770. This also includes insertion of HDPE pipe of 110 mm/G.I Pipe of 100 mm in the bore drilled (HDPE pipe/ GI pipe is to be supplied by Railway).
5500
2264
12452000
Trenching under Rails for crossing the track (Track Crossing) and refilling of trenches as per SCR Drg. No. 5768. The track crossing shall be done at right angles. The depth of cable trench shall be 1.2 meter below the rail flange. The depth between top cable and the level of rail flange of the 7 rail shall never be less than 1.0 meter. The ballast shall be stacked separately while making the trench and the earth soil shall be stacked separately. While re-filling the trench, the earth soil has to be filled first to the ground level and the ballast has to be properly put in the track. This work has to be done under supervision of supervisor of S&T and supervisor of P.Way.
2700
1139
3075300
Breaking of metal/ tar road and refilling after laying the cables as per drawing no.SDO/CABLE LAYING/010. The surface of the road shall be concreted to match with the old surface.
1100
211
232100
Cable laying and meggering. (a) Laying different type of cables in the trench. Termination covered elsewhere. Qty to be read as "Per Cable"
575000
7
4025000
(b) Meggering of cable laid, before and after laying (before closing of trench). Qty to be read as "Per Cable" 12
2100
319
669900
(c) Meggering of cable already terminated. Qty to be read as "Per Cable"
2100
85
178500
Supply and Filling sand in trench/under floors/OFC chambers, complete as per instruction of engineer in charge.
125
1562
195250
Excavation of coil pit up to a depth of 1 meter and dia of 1.5 meter for providing coil at location box, point, signals etc., This includes back filling and ramming of trench / pit after laying the cable and consolidation of soil.
430
1796
772280
Cable Duct behind Relay Room/Goomties of 1.8 m dia. and 1.2 meter depth consisting of brick work of 254 mm thickness of proportion 1:6 with sand filling after coiling of cables. The top of 15 sand filling covered with concreting of size 1.3 meter dia. and 200 mm depth of proportion 1:1.5:3. Outside of the duct should be plastered with cement mortar in a ration of 1: 6 to achieve smooth finishing. All materials including cement, chips of size 20 mm and second class bricks etc. to be supplied by the contractor.
7
9924
69468
Cable laying at culverts/bridges Low flood level- to take the cables underground across the drain bed at a depth of 1.2 meter for crossing small culverts with low flood level. After making the trench, the cable trench shall be further dug at an interval of 4 meter to a depth of 0.5 meter and at such intervals concrete supports of 300mm X 500mm to a height of 0.7 meter shall be constructed 16 using 1:3:6 concrete. The pipe shall pass through this concrete at proper height so that the pipe with cables inside it rests in the cable trench at 1.2 Mtr depth. The concrete supports so cast shall be cured for a period of 5 days before filling the trench. During the curing period of 5 days, the culvert portion of cable laying shall be protected by keeping a watchman day and night (a)Trenching across the drain bed to a depth of 1.2 meter with 30 cm width in all types of soil, laying of DWC/GI/RCC pipes supplied by Railways, refilling with excavated soil, ramming and consolidation after 5 days
130
110
14300
Digging of pit of size of 300mmX500mmX500mm in already dug cable trench of 1.2 meter depth and casting of RCC support of 300mm X 500mm X 700mm size over the DWC/HDPE/GI 17 pipe supplied by Railways, carrying the cables using shutters with 1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size including shuttering, centring and cost of cement, curing etc. Except the HDPE/GI/DWC pipe and bends, all other material is to be arranged by the contractor. Qty to be read "Per Suppport"
40
2331
93240
Cable laying at culverts/bridges -High flood level : Excavation of cable trench of 300mm width and 800 mm depth in the ramp from the foot of the culvert on to the top of the culvert by storing the ballast and the excavated soil separately and laying of HDPE/DWC/GI pipe( to be supplied by 18 Railways). The pipe is to be laid , the cables required are to be drawn using bends( to be supplied by Railways) as per the drawing No.SK.15/11. After drawing the cables the bends are to be concreted to a size of 300mmX1000mmX1000mm using required shuttering with 1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size and curing for required days. Except the HDPE/GI/DWC pipe and bends, all other material is to be arranged by the contractor. (b) Concreting of portion of the pipe at the bend near the culvert as per the drawing SK.15/11. "Qty to be read as Per Location"
20
1765
35300
Supply, transporting and installation of Concrete (RCC) Route Indicators at intervals of 19 50 meters as per instructions of engineer in charge as per drawing no. SK 12/10.They should be of standard RCC with letters "SCR S&T cable" as per type of cable laid to drawing. In case of telecom quad cable joint locations it shall be painted with GREEN and ORANGE colour for normal indication of cable path.
900
1204
1083600
Providing of channel ramps for drawing cables at bridge/culvert entries duly providing 20 GI bend/ flexible conduit 8 cm diameter and constructing channels from a depth of 0.8 meters to surface as per Drg no 15-D7 of IRSEM. (Concreting to be done at the ratio of 1:4:8 - Cement, sand and fine metal). All required material to be supplied by contractor.
40
734
29360
Provision and laying cement concrete (including transportation of all the material). (a) Providing and laying in position cement concrete of specified grade including the cost of centring and shuttering :- 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) 22
40
5007
200280
(b) Centring and shuttering
450
587
264150
Jungle Cutting :: (a) Clearing jungle including uprooting of rank vegetation, grass, brush 23 wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of cleared jungle to a distance of 50 m outside the periphery of the area cleared (Measurement is to be done as per area cleaned).
2800
10
28000
Supply, placing and covering of RCC duct from Home to Home as per SCR Drg. No. 5778. Material shall be inspected by RITES
9000
2174
19566000
CHAPTER 26 - LOCATION BOX :: Location box foundation and erection (a) Excavation of pit, casting concrete foundation and erection of apparatus case Full size as per SCR Drg. No. 5781 and fixing of 1 No.of 'E' type lock for the front door, latching arrangement for backdoor, fixing of Hylam sheet (Hylam sheet supply is covered elsewhere and Wooden Reapers also can be used in place of 25 Hylam sheet for which supply & fixing covered elsewhere) and painting the apparatus case inside and outside with one coat of red oxide, two coats of aluminium paints outside and white paint inside including painting of termination, equipment and number particular on location box (foundation bolts and nuts, 'E' type lock, cement, river sand, stone jelly of size 20/20mm, paints, varnish, fixing bolts and nuts and all other miscellaneous material required for the work shall be supplied by the contractor).
270
15324
4137480
(b) Excavation of pit, casting concrete foundation and erection of apparatus case half size as per Drg. No.SK/CN/1/89/B/1, fixing one 'E' type lock for the front door and latching 26 arrangements for the back door and painting the apparatus case inside and outside with one coat of red oxide and two coats of aluminium paints outside and white paint inside (foundation bolts and nuts, painting of particular, E type locks, cement, river sand, stone jelly of size 20/20mm and nuts and all other miscellaneous material required for the work shall be supplied by the contractor)
50
10809
540450
(c) "Filling earth around location boxes/signal foundations for a width of 0.5m on all 27 sides, up to a level 150mm below the foundation top. This work includes consolidation of earth by watering and ramming. The earth shall be taken from Railway premises as instructed by Railway representative at site."
140
405
56700
(d) Basement plastering of Full/Half location box. All the required men and materials are to be arranged by the contractor.
314
368
115552
Installation in location box at RE cuttings and wiring of all power supply equipments viz., Chargers, Transformers, Trans-rectifiers etc., as per the detailed specifications.
4
559
2236
Test lamp arrangement in LBs/RE cuttings (Auto mobile handle type). "Qty to be read as per Location Box"
200
178
35600
Supply and fixing of following Teak wood reapers/ Blocks after applying two coats of wood primer. (f) Hard wood Planks for Keeping Equipment in the Full Box: 940mm x 20mm x 300mmapproximately after applying two coats of black enamel paint. "Qty to be read as Per Plank"
40
20400
20400
(g) Hard wood planks suitable for Half Box 40mm thick x 450mm x 470mm approximately after applying two coats of black enamel paint. "Qty to be read as Per Plank"
14
452
6328
(h) Supply and fixing of Teak Wood planks of sizes as instructed by the site in-charge 33 with smooth finishing surface to be provided where ever required such as in location boxes relay room, equipment room and battery room, Fine wood polish of approved quality to be applied for two times after thorough application of emery paper. Fixing bolts and wood polish supplied by the contractor.
4.75
65659
311880.25
(i) Supply & fixing Hard Wood planks of 40mm thick and not less than 200 mm width with smooth surface, and painting with black enamel paint painting (Hardwood, paints, fixing bolts is to be arranged by contractor).
-
-
34
Cable termination including fixing terminals, fuses, LDs, Meggering of cables and recording the readings. "Qty to be read as Per Conductor"
190000
14
2660000
Fixing relay bases, wiring in location boxes, bunching, fixing of relays as per circuit diagram. This includes fixing of condensers, resistance, 6 way / 1 way terminals/ WAGO, ND type fuses, LED indicators for fuses as per type fuses.
350
338
118300
Supply, painting and fixing of gland plate for Location box as per site requirement. (a) Full Location Box 38
620
776
481120
(b) Half Location Box
50
388
19400
Tie Bar Fencing : (a) Fixing of Tie Bar Fencing panels supplied by Railways duly transporting to the site (Goomties/Mid section Locations) from Centralised location. Cutting, drilling, 39 jointing with nut and bolts wherever required as per site requirement for protecting goomties /location boxes. After fixing of the tie bar, panels to be painted with two coats of aluminium paint and levelling the earth wherever required. All required materials other than tie bar fencing panels should be arranged by the contractor/agency. "Qty to be read as Per Metre"
900
1035
931500
(b) Excavation of pit to size of 450mmx 450 mm x 450mm and concreting the same with 1:3:6 aggregate 20mm for erecting the tie bar fencing panels, curing and white washing the foundations.
450
1645
740250
Excavation of pit in and around the existing location boxes very carefully without damaging the working cables and shifting and turning the location boxes to clear of the infringement as instructed by the Railway representative at site. The work includes, ensuring the safety of the 41 signalling system, releasing the cable coils to give access for shifting/turning the location boxes. Necessary masonry work and earth work in and around the location boxes to the required level shall be done as instructed by the Railway representative at site. If the existing earth connections to the location boxes are disturbed, the earth wires shall be properly reconnected. [All materials required for the work shall be supplied by the Contractor]. (a) Shifting of apparatus case (Full) 42
55
4053
222915
(b) Shifting of apparatus case (Half)
12
2683
32196
Alterations to painted termination/ wiring particulars of functions in the existing apparatus cases, cable termination boxes, etc., on the PVC/ nylon sleeves and painting of new 43 nomenclature on the existing signalling gadgets. This work includes carrying out alterations of particulars on the inner side of the doors of apparatus cases, re-numbering of apparatus cases and cable termination boxes (Paints and all other miscellaneous materials required for the work shall be supplied by the Contractor). (a) Alteration to painting particulars (apparatus case - Full size)
37
1239
45843
Fabrication, supply and erection of conventional Earth to Signalling/Telecom equipments -Excavation of earth and providing earth pipe of size 50mm dia. 3.5mm thick 2.0 m. long G.I. pipe of heavy quality with masonry tub constructed around at earth locations as specified by site 44 Engineer. Alternate layers of 30kgs-charcoal and 30kgs-common salt to be filled in the pit while closing. The pipe perforation etc., to be carried out as per drawing No. SK 10/10. The earth pipe to be connected to the function with cable as supplied by Railways. The reading should be painted on the masonry tub. The masonry tub of 300 mm x 300 mm x 300mm (along with Kundi) should be covered with cement slab.
370
6652
2461240
Provision of ring earth by providing & connecting conventional earths with coppercatenary wire as required at site as per instructions site in charge. Excavation of earth and providing earth pipe of size 50mm dia, 3.5mm thickness, 2.0m long GI pipe of heavy quality along with masonry tub constructed around at earth locations as specified by site Engineer. Alternate layers of charcoal (30 kg) and common salt (30 kg) to be filled in each pit while closing the pipe perforation etc., to be carried out as per drawing no. G/SG/09/2002. The masonry tub of 400x400x450mm, 50mm thickness should be cover with cement slab to be provided each conventional earth. Masonry tub shall be filled with river sand after completion of earthing. Conventional earths to be wrapped with catenary wires before excavated in earth along with use of proper clamps and nuts. All earths to be connected with each other by use of copper catenary wire or suitable cable provided by Railways. Minimum two number Earth pipe to be connected inside the location/function with suitable cable (cable will supplied by railways). Excavations of trench of 0.5m minimum depth for inter connection of 4 conventional earths by catenary wire. Catenary wire should be welded through arc welding to the GI pipe with copper clamps. The earth reading, DOI & DOM should be painted on the masonry tub. (All the men and the materials to be supplied by the contractor except catenary wire/Cable).
10
24286
242860
EMI/ Earthing arrangements to achieve earth value less than 1 Ohm (minimum 8 46 maintenance free earth) for EI at central location or end Goomties for object controllers as per RDSO specification as required for the EI system as per Rly. Br.letter No.2010/Sig/SGF/EI (Ansaldo) dated 22.06.2011 or latest shall be followed. All materials shall be supplied by the contractor including Maintenance free earthing. "Qty to be read as Per Location" Material shall be inspected by RDSO
7
285013
1995091
Supply and Installation of "A"-Type LPS (ERICO or similar make) Model No: System 3000 or similar. a) Air Terminal - 1No. b) Insulated 2m FRP Mast Black -1No. c) Upper Termination Kit -1No. d) Lower Termination Kit -1No. e) Lightning Event Counter -1No. f) Down Conductor - 30 Mtrs. g) GI 47 pipe 50mm dia and 3.5 mm thickness as per SCR Drawing No.5777. h) Installation to be done as per SCR Drawing No.5777. Installation also includes fixing of LEC Counter with suitable MS box enclosure and running of down conductor through PVC pipes and connecting the same to nearby earth electrode. All material required for installation will be provided by contractor. Material shall be inspected by RITES
7
315000
2205000
Supply and Erection of RCC precast slabs with hook to cover Earth pits of dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.) 49
370
156
57720
Earthing and soldering of cable armour. "Qty to be read as Per Cable"
3900
31
120900
Installation of single earth(maintenance free) including the following:- welding and fixing of copper tape (used as bus bar) welding of cadmium bronze cable to copper plate using material supplied vide item no. 1,2 of SPD of Sch-A . All the material supplied for mounting of copper tape, exothermic weld materials, tools and fixtures for welding copper tapes shall be arranged by contractor. a) Digging /Auguring/Boring of single earth pit of 100mm to 125 mm dia to the depth of approx. 2.8 meter. b) Insertion of 3.0 meter electrode and penetrating it at least 0.2 meter by pushing gently with sledge hammer where the natural soil is assumed. c) Filling of earth pit with earth enhancement compound (EEC) in slurry from and backfilling. d) Carrying out exothermic weld 50 connection on single earth electrode to a copper tape of 150X25X6mm. e) Carrying out exothermic weld connection on the copper tape of 150X25X6mm on earth electrode for connecting two 35 Sq mm cables for redundancy. f) The exothermic welding material for bonding the earth system shall be procured from RDSO approved firms, which includes graphite moulds, clamps, weld metal powders. g) Digging a trench to a depth of at least 0 .5 Mtr. and run the two 35 Sq mm earth conductor (procured against supply item) from earth pit to MEEB. h) Routing and termination of two 35 sq mm earth conductors in trench from earth pit to 300X25X6mm MEEB, which is to be fixed inside the equipment room with two insulation studs. i) 300X300X300 mm (inside dimension) concrete earth pit with a concrete lid, approx 50mm thick with pulling hooks, shall be provided to cover the pit. Back side of the cover will be painted in black and date of the testing and earth resistance value shall be written.
55
6338
348590
Routing and connecting all the equipments in the equipment/relay room to MEEB/SEEB 51 with 16/10 sq mm copper cable using copper lugs with stainless steel nuts and bolts and fixtures. The work includes laying and routing the copper cable in PVC pipes/conduits and fixing them on wall as directed by engineer in charge. PVC pipes/conduits willbe supplied by Railway.
700
34
23800
Provision MS flat connection from Earth pit to LBs/Signals including supply and laying of 52 MS Flat of size 40X6mm at site, supply of GI bolt of size M12X40mm with two Nuts along with two plain washers and one spring washer, drilling of holes in MS flat of different sizes at site, cutting with bending and twisting of MS flat as required at site, painting of MS Flat with one coating of red oxide as primary and two coats of anti-corrosive black paint and drilling of holes in Location Boxes at site.
2000
294
588000
Welding for jointing MS flat 6mm thick X 40mm width of different lengths strips connecting from Earth to location boxes/Signal post/Signal Unit for better continuity. Prior approval of welding material to be taken from Engineer In charge. "Qty to be read as Each Weld"
600
349
209400
CHAPTER 28 - SIGNAL RELATED ITEMS Foundation and erection of Colour light signal which includes a) Excavation of pit, casting concrete foundation as per SCR Drg. No. 5772 using metallic templates, for erection of Colour light Signals up to 4 aspects (foundation bolts, cement, river sand, stone jelly of size 20/20mm dia and all other miscellaneous materials required for the work shall be supplied by the contractor). b) Erection of surface base, signal post, mounting of Colour Light Signal up to 4 aspects complete on signal post / offset bracket, LED fixing, plumbing of the signal through sealing gap between Surface base and signal post, fixing of ladder with platform complete and concreting of ladder shoe, fixing of number plates, marker board, termination tail cables, wiring of 54 signal unit, provision of EWS locks, and painting of one coat of red oxide and two coats of aluminium/enamel paints. When the aspect is fixed on offset bracket using 'U' bolts and nuts, a through bolt shall be provided by drilling of hole in the signal pole to prevent the offset bracket from sliding down. (Supply of surface base, offset bracket, CLS pole, CLS aspects complete, ladder with shoes and platform, LED aspects, current regulators and wire coils will be supplied by Railways). ('U' bolts and nuts, through bolts and nuts, cement, stone jelly 20/25mm dia, river sand, Signal Colour Rings, all fixing bolts and nuts, teak wood, paints PVC/Nylon sleeves, enamelled number plates, enamelled marker boards, EWS locks, and all other miscellaneous materials for the work shall be supplied by the contractor). 60% Payment after completion of work mentioned at (a) and remaining 40 % after completion of work at (b))
54
15360
829440
Foundation & erection of Shunt signal which includes a) Excavation of pit and casting concrete foundation as per Drg. No. SG/CN/02/10 using metallic templates, for erection of ground type colour light Shunt signal. (Foundation bolts and nuts, cement, river sand, stone jelly of size 20/25mm and all other miscellaneous materials for the work shall be supplied by the contractor). b) Erection of 55 Ground type shunt signal complete including surface base, signal post, LED aspects, number plate, termination of tail cables, wiring of signal unit, provision of EWS locks and painting of one coat of red oxide and two coats of Aluminium /.enamel paint, (Supply of Ground type shunt signal complete including surface base, signal post, LED unit is to be supplied by Railways). [ EWS locks, enamelled number plates, bolts and nuts, lead wool, paints and all other miscellaneous materials shall be supplied by the contractor). (60 % Payment after completion of work mentioned at (a) and remaining 40 % after completion of work at (b))
54
6805
367470
"Fixing and wiring of platform repeaters. The work involves fixing of platform repeater using suitable fixing arrangements at places indicated, wiring the same and painting as per the 56 instructions of Railway representative at site. The signal shall be connected to the apparatus case using cables neatly clamped. The work also includes provision of one EWS lock. (Laying of cable, supply of repeater signals and cables is not included in this schedule). [Required paint, EWS lock and all other miscellaneous materials required for the work shall be supplied by the Contractor]."
7
5162
36134
Fixing of junction type route indicator - 1 way to 6 way - complete / fixing of additional limb to the existing route indicators, termination of tail cables, wiring as per approved circuits 57 diagram, provision of required number of EWS locks, wire mesh and painting. (Supply of junction type Route Indicators - complete and additional limb is not covered in this schedule). [Fixing bolts and nuts, EWS locks, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor]. (a) 1 way route indicator. 58
5
2156
10780
(b) 2 way route indicator
3
2554
7662
Fixing of Offset brackets using 'U' bolts and nuts, erecting of Calling On Signals/'A' marker lights, termination of tail cables and wiring, provision of EWS lock, number plates/ markers 59 boards and painting. The work also includes drilling suitable holes on the CLS post and provision of a through bolt with nut to prevent the Off-set bracket from slipping down. (Supply of Calling On Signal / 'A' marker light, LED aspect / holders and bulbs, wire coils and off set brackets will be supplied by Railways). ['U' bolts and nuts, through bolts with nut, EWS lock, Enamelled number plates, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor.
36
1998
71928
"Fixing of offset bracket using 'U' bolts and nuts erection of posts type shunt signal, wiring of LEDs, termination of tail cables, provision of EWS lock, fixing of number plate and painting of 60 one coat of red oxide and two coats of aluminium / enamelled paint. The work also includes drilling suitable holes on the CLS post and provision of a through bolt with nut to prevent the offset bracket from slipping down (Supply of Post type shunt signal, LED unit is to be supplied by Railways). EWS locks, enamelled number plates, bolts and nuts, lead wool, paints and all other miscellaneous materials shall be supplied by the contractor)."
27
2364
63828
Fixing and wiring of Multi lamp! Stencil type route indicators - complete, termination of 61 tail cables, wiring as per approved circuit diagram using wire PVC 3/0.75mm & 16/0.2mm copper, provision of EWS - required Nos., and painting. (Supply of route indicators is not covered in this schedule)[Fixing bolts and nuts, EWS locks, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the Contractor].
16
3868
61888
Provision of SCREEN on signals when they fall within 2 meters from the live conductor 62 by expanding metal (size 20mm x 60mm strand 3.25 mm wide and 1.6mm thick) as per the instruction of site engineer in charge. This includes supply of all materials including connection with earth electrode as per SCR Drg. No. 5767.
13
4194
54522
Supply and fixing of cross bar on signal (signal not in use) made of hard wood of size 1000mm x 100mm x 20mm. The cross bar shall be painted white as per Signal Engineering Manual. All material required for installation shall be supplied by contractor.
54
487
26298
Strengthening of foundations of signals, Full/Half location boxes up to a height of 30 64 cm, by carrying out the earth work around the foundation, ramming of the earth, carry out masonry work from bottom of earth work using country stones and cement masonry to prevent the earth from slipping down the bank.
2500
760
1900000
CHAPTER 29 - POINT MACHINE:: Fixing of universal point machines and wiring on PSC/Wooden sleepers as per standard drawing. Wiring as per circuitry includes fixing & wiring of point 65 contactor unit frames and controlling relays, fixing and wiring of point termination box, fixing of crank handle ward plate of required configuration and Ground connections, P-clamp insulations, setting, stretcher bars etc., [All miscellaneous material required such as nuts, bolts, washers are to be arranged by contractor]
60
6460
387600
Installation, termination of cable in termination box, wiring, testing and commissioning 66 of High Thrust point Machine. This includes fixing of point machine on MS plate fixed on sleepers complete with fixing of anti theft covers, MS termination boxes, ground connections, required insulation, crank handle ward (wherever required) etc. This also include necessary adjustment and smithy work, drilling of holes on tongue rails, supply of all miscellaneous material such as flat, angle, bolt, nuts, pins etc.
50
12067
603350
CHAPTER 30 - TRACK CIRCUIT :: Fixing of Track lead junction box on angles (50 x 50 x 6 mm size), drilling one hole on either side of the box of suitable size and fixing track lead junction box 67 by the side of the track, drilling 4 holes of 7.2 mm dia. on Rail, connecting double track leads with bond pins, running track lead wire, termination of track lead wire on ARA terminals duly fixing the same inside the TLJB Teak wood board bolted inside the track lead junction box. (Fixing angles, bolts, nuts and teak wood boards to be supplied by the contractor).
900
505
454500
Wiring of Track circuits feed end, relay end complete with TLDs, batteries, chargers, 68 Chokes, track relays, double lead wires, providing insulation etc,. Connected with track commissioning of track circuit including provision of bracket for TLD covers and painting. Anti-tilting arrangement has to be done for chargers & batteries. All miscellaneous material required for installation shall be supplied by contractor.
162
1509
244458
Painting of particulars of Glued Joint on rails/track circuit no. on TLJ boxes as per 69 particulars issued by Engineer in charge. Before painting on surface of the Glued Joint Rails/TLJ boxes shall be cleaned thoroughly. Painting shall be done with approved quality of standard paints like Asian/Johnson/ Nicholas /Berger etc. All the men and materials shall be arranged by the contractor and the colours scheme shall be as per the instructions of Engineer in charge.
320
149
47680
Drilling of four no's of 7.2mm holes, per rail joint on web of the rail , providing bond wires with wire rope. (Bond pins single groves are to be supplied by contractor - Wire rope for bonding will be supplied by Railways). "Qty to be read as Per Rail Joint"
1250
134
167500
CHAPTER 31 - SIGHTING BOARDS :: Fabrication, Supply and fixing of CALLING ON 71 instruction boards, STOP boards/ BSLB/Shunting Limit Board/Auto section board or any other board with engineering grade reflective sticker of size 600X1000 mm GI sheet, with MS angle of 75X75X6 mm with 6 meter length including paint, excavation of pit and concrete foundation etc. as per the instructions of sight in-charge. All necessary materials to be arranged by the contractor).
15
5314
79710
"Providing and fixing of Speed board on signal post complete with retro reflective 72 sheeting over the board and with all fixing arrangements of size 900mm equilateral triangle made of 2 mm thick aluminium sheet and back support 25mmx3mm MS flat with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles to suit Signal post. Backside of aluminium sheet to be painted with two coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge."
9
3627
32643
Provision of foundation for the signal warning boards/ calling on boards/all types of boards. (A pit of size 400 mm x 400 mm x 1500 mm is to be dug and cement concrete foundation in the pit in the ratio 1:3:6 to be casted. The rail post/MS angle is to be erected up right in the foundation.
15
1563
23445
CHAPTER 32-INDOOR WORKS :: Crank Handle Box/ KLCR Box for Crank Handle (b) Supply, installation and wiring of KLCR relay 24V DC AC immunized with 4F/4B contacts. This also includes termination of cable and required wiring in KLCR box. (Consignee Inspection) 76
30
10740
322200
(c) Fabrication and Supply of Box suitable for 8 No's KLCRs (Consignee Inspection)
4
17700
70800
Manufacturing and fixing of glass fronted box ( key box) made out of teak wood of size 406X254X75 mm.
4
3575
14300
Fixing of PVC pipes & bends, drawing of required wires through the same up to 78 functions like control telephone, Dy.control telephone, magneto phones inside SM's office as per circuit diagram. This includes supply and fixing of required DPDT and rotary switches, PVC pipes and bends 25mm dia with 2mm wall thickness, Lightening dischargers and painting of particulars.
2
5406
10812
Fabrication, supply and fixing aluminium ladder of size 25 X 25 X 5mm, 200mm width, arrangements for drawing various wires in the battery, equipment and relay rooms.
200
703
140600
Erection of CT Rack/Relay rack 1way/2way/4way with scaffolding suitably concreting 80 tri-pod bases using J-bolts, fixing rack support of size 50 x 50 x 6 mm on to the wall. Reel insulators are to be provided for insulating the rack from the scaffolding & tri-pod bases."Qty to be read as Per One Way Rack"
57
701
39957
Fixing of the following on Pre-erected Relay Racks (a) Fixing of approximately 200 no's 81 of 6 way/ 1 way terminal block horizontally on 6mm Hylam sheets which in turn to be fixed to rack with all supports as per instructions of SSE in charge. Materials such as bolts, nuts and supporting flats to be supplied by the contractor only.
57
735
41895
(b) Cutting and fixing of Hylam sheet of 6 mm/3mm thickness to suit to 1 way relay rack and fixing the following with contractors screws, bolts and nuts and fixing strips, condensers and resistances of various values - 50 No.
17
155
2635
(c) Fixing of non-deteriorating fuse holders with LED indications and resistors and negative terminal strips on 6mm Hylam sheet with contractors screws, bolts and nuts.
51
8
408
(d) Preparation of Contact Analysis for 'Q' style relays as per detailed technical specification.
320
19
6080
(e) Fixing relay bases on the relay frames erected in Relay Room, Wiring of all types of relays by drawing various sizes of wires/multi core cable, fixing fuses, condensers, resistances, LEDs etc and wiring duly soldering the same as per approved circuit diagram, testing point to point before soldering and after soldering, bunching and lacing as per detailed technical specification. Numbered ferrules shall be provided for each wire. Different colour codes and sizes of wire to be used as per standard practice. This also includes, provision of all PVC sleeves required to be provided. Copper lugs to suit to 16/02 wire and neat bunching, lacing with Modi Nylon / Twine thread and using PVC dotted 85 tape with buttons. This also includes soldering all the wires in the relay room with Rosin core of IS Spec. 1921 60 % Tin and 40% Led). Soldering should be done as per standard practice. This also includes inserting the clips, point to point testing as per the circuit diagram and plugging relays to Relay bases (except Inter-cables, relays other materials such as Rosin core, flux, nylon thread. PVC dotted tape should be supplied by the contractor). Point to point testing should be done in the presence of Engineer-in-charge as instructed in two stages, one before soldering and the other after soldering. Per
200
701
140200
Installation, testing and commissioning of Data Logger which includes the software configuration, validation, taking test print, networking to nominated location for monitoring, changing of EPROMS if any and alterations to data base in HQ/SSE offices where ever required.
7
36208
253456
Implementation, testing and commissioning per station of point reversal alarm. "Qty to be read as Per Station"
-
-
88
Supply & Installation of Proximity switch (CE approved) for relay room door & connecting with the data logger as per the following specifications. 1. Supply and fixing of different sizes of PVC casing/pipes as required by Railway at site by fixing/clamping to the wall or laying in floor 89 for indoor wiring purposes. Necessary hardware materials such as Galvanized screws and washers, wooden pegs, teak etc, deep boxes, Junction boxes, Normal bends or diversion bends etc. to be arranged by the contractor. 2. Supply & fixing of PVC Flexible pipe of 25/40/50mm dia sizes of reputed make. 3. Drawing of fresh new wires from the relay base/proximity switch to another relay base/Data logger as per the new wiring without affecting the other wires. This also includes testing of wires using buzzer of the new wires drawn once before soldering and once after soldering.
7
1798
12586
Fabrication of Keys and Plate configuration for points:: (a) Fabrication, fixing of required configuration of key for point machine for grouping of crank handle.
24
319
7656
(b) Fabrication, fixing of required configuration of grouping plate in point machine for grouping of crank handle.
99
563
55737
Provision of PA system and telephone communication at stations/ tents as per the 92 instructions of Railway representative at site. Signalling cables available may be used for the communication. (Hiring of PA system equipments shall be done by the Contractor and telephone will be provided by Railway) [All other miscellaneous materials required for the work shall be supplied by the Contractor]."Qty to be read as Per Tent per Day"
40
1239
49560
Fixing of LEDs along with Jewels, Resistors, Sleeves duly drilling holes and soldering including drawing of wires, bunching and lacing. (All materials to be supplied by the contractor).
110
19
2090
Supply and installation of wire mesh (Gl) with welded MS flat /Aluminium frame and fixing on windows/ ventilators of different sizes as to be given by engineer.
1160
669
776040
CHAPTER 33 - TRANSPORTATION :: Transportation of materials from any Stores to Site and vice- versa including loading and unloading. (a) Lead up to 50 Kms. "Qty to be read as PTPK" 96
20000
11
220000
(b) Lead above 50 Kms. "Qty to be read as PTPK"
60000
7
420000
Arranging skilled labour at S&T Stores for loading/ unloading/stacking of departmental materials.
200
593
118600
Segregation, stacking, loading, unloading and transportation in 6 MT capacity vehicle from Store to Scrap Depot or Store to Store within a city as per instruction of Engineer In charge."Qty to be read as Per Load"
40
10266
410640
Hiring of JCB machine (in good condition) for levelling and dressing ground/dismantling 99 structures including disposal of debris through dumpers etc., with contractors labour, JCB machine, machine operator, fuel etc. The contractor shall arrange road permit for vehicle for all the states of operation, as per instructions of engineer in charge. "Qty to be read as Per Hour"
1000
1091
1091000
Installation, wiring, earth connections with SEEB, testing and commissioning of IPS 101 system. Wires/cables shall be supplied by Railways, Charging of battery is covered elsewhere. Minor items like casing/capping, Ladder, insulators, Lugs, Lacing of cables etc., where required to be supplied by contractor. Grouting and masonry work of the IPS to be done. Work includes installation of charged batteries and their wiring with IPS.
7
21746
152222
Installation, Calibration and commissioning of Earth Leakage detector 8 to 12 channels as per instructions of engineer in charge.
7
11802
82614
Supply and wiring of Polymeric Positive Temperature Co- Efficient Device self resetting 103 type (PPTC) of 2A rating suitable for railway applications of reputed make. The PPTC fuse shall be wired by soldering suitable flexible wire on both ends (all material except flexible wire has to be arranged by contractor).
375
87
32625
CHAPTER 35-TESTING :: Arranging of sufficient staff by contractor and giving test to the railway in charge in the following stages as per instructions. (a) Stage -1: Testing of wires drawn point to point using buzzer. (Before and after soldering.) "Qty to be read as Per Sheet"
400
677
270800
(b) Stage -II: Making a simulation test board plywood 3mm approximately size 1.5 x 105 1meter. Painted according to the yard layout fixing 1 way /2-way switches in its approximate position for track circuit, point setting lamp holders and lamps. Carrying out testing using simulation board after energising of internal circuit. "Qty to be read as Per Road"
19
3896
74024
Testing to check integrity of gears (Field correspondence) i.e. One Signal Unit (with or 106 without route)/Track Circuit/LC Gate/One Point machine/One Block Instrument/One Slot etc. This item will be applicable after one round of complete testing of gears by the contractor in presence of Railway Supervisor.
300
103
30900
Testing and commissioning the entire signalling installations jointly with the Railway 107 representative at site at the Stations/ LC gates/IBS/Auto Signalling covered under various schedules of the Contract, and ensuring that all the signalling gears are installed and adjusted as per the existing rules. (b) "Testing and commissioning of Stations (with more than 5 roads)". "Qty to be read as Per Station"
2
51415
102830
CHAPTER 37-AXLE COUNTER :: Installation (including power supply arrangements if required), testing and commissioning of SSDAC/HASSDAC. The work consists of: a) Fixing of axle counter track device consisting of Tx-Rx coil assembly for each detection point drilling holes in the rails as per the marking given by the site in charge. b) Fixing of rails deflector plates on either side of each 108 detection points as per the marking given by the site in charge. c) Fixing of evaluators inside pre- erected location boxes on the nominated planks along with VR assembly duly providing anti-vibration arrangements, fixing terminals and wiring as per the instructions of site in-charge. d.) Routing cables from Tx/Rx coil assembly through pre laid GI/HDPE pipe arrangements of track crossing and entering the location box and termination (60 % Payment after installation & Testing and 40% after commissioning).
5.5
37152
204336
Supply, erection and fixing of retro reflective type BPAC Warning boards/IBS Legend 109 Board of size 1000X600X3mm. The boards shall be provided with Retro Reflective type BPAC Warning boards. MS Angle, stone jelly of size 20 / 25mm dia, river sand, cement, fixing bolts and nuts, paint and all other miscellaneous materials required for the work shall be supplied by the contractor.
10
9564
95640
CHAPTER 39 - DOCUMENTATION :: Design of SWRD in Auto Cad. Initially, contractor shall submit 3 copies for approval of Railways. One set will be returned duly approved for making a fair 110 copy or for re-submission for approval after incorporating the changes as required by Railways. After carrying out changes, three Hard copies to be submitted for Railway Approval. After approval, Auto Cad copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies of final approved drawing (Ammonia Print or print as approved by Railway) in properly bound booklet along with its scanned copy. (e) For a Six-Line Station 111
1
30436
30436
"Preparation of Table of Control based on SIP issued in Auto Cad in A3 size. Initially, 112 contractor shall submit 2 sets of document for approval of Railways. One set will be returned duly approved for making a fair copy or for resubmission for approval after incorporating the changes as required by Railways. After carrying out changes, two sets of Hard copies to be submitted for Railway Approval. After approval, Auto Cad copies to be submitted in USB pen drive along with approved copy in Tracing film and two sets of final approved drawing in properly bound booklet along its scanned copy."
25
1000
25000
"Design in AUTOCAD and submission of two draft copies of Complete Outdoor Particular such as Cable Route Plan, Cable Corage Plan, Cable Termination Rack/Power Rack Particular, Track Bonding, and Location Box Particular along with NI wiring/NI Relay Disposition chart. One copy will be returned either duly approved or for resubmission for approval after incorporating the changes as 113 required by Railways. After approval, one approved Tracing film copy & six copies (Ammonia Print or print as approved by Railway) of above drawings along with six copies of SIP and SWRD in Plastic Covers. All above drawing to be scanned including SIP & SWRD, bound in 6 different booklet with Rexin Cover (Each booklet shall have minimum 10 spare plastic transparent sheet) and a soft copy to be submitted in a Pen Drive for following categories of Stations:" (e) For a Six-Line Station (Up to 90 Location Boxes)
1
131648
131648
Design of Cable Route Plan (Distant to Distant) including details of all track crossing/Horizontal boring/Cable Loop/ Cable Joints etc. in AUTOCAD & submission of coloured paper 114 copies for approval. After approval, Auto Cad copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies of final approved drawing in plastic cover (Ammonia Print or print as approved by Railway) in properly bound booklet along with its scanned copy. (g) For a Eight- Line Station or more
1
26714
26714
Design of Cable Distribution Plan in AUTOCAD & submission of Three paper copies for 115 approval as per the practice of SCR. After approval, AUTOCAD copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies of final approved drawing in plastic cover (Ammonia Print or print as approved by Railway) in properly bound booklet along with its scanned copy. (g) For a Eight-Line Station or more
1
22307
22307
Design of Track Bonding Plan in AUTOCAD & submission of Three paper copies for 116 approval. After approval, AUTOCAD copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies of final approved drawing in plastic cover (Ammonia Print or print as approved b y Railway) i n properly bound booklet alongwith its scanned copy. (g) For a Eight-Line Station or more
1
15102
15102
Design of Location Box Drawings in AUTOCAD (Including Contact Analysis, Fuse 117 Particulars, cable particulars etc) and submission of Three paper copies for approval in A4/A3 white papers. After approval, AUTOCAD copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies in Ammonia print of final approved drawing in plastic cover in properly bound booklet along with its scanned copy."Qty to be read as Per location Box"
234
584
136656
Supply of Original Tracing of Location Box Drawings (Including Contact Analysis, Fuse Particulars etc) along with softcopy in CD after incorporating all the corrections. (g) For a Eight-Line Station or more. " Qty to be read as Per Station"
1
4406
4406
Supply of Ammonia Prints or Print as approved by Railways (a) A3 size. "Qty to be as Per Sheet"
400
17
6800
Circuit Diagrams:: (b) Preparation of A-3 size drawings as at site. Providing one print on 120 tracing paper on in standard format. Drawings are to be prepared on polyester tracing film of double side 50 microns thickness. (Polyester tracing film and other consumables are to be arranged by the contractor.)."Qty to be read as Per sheet of A-3 SIZE" 121
400
140
56000
(d) Arranging rexin cloth bound booklets and binding. "Qty to be read as Each Booklet". 122
10
243
2430
(b) Preparation of Track Bonding Diagram on non-transparent acrylic sheet of thickness 4mm with aluminium beading and hanging support with screen printing, lettering and bonding diagram. "Qty to be read as Per Yard/Per Station"
7
-
65037
(d) Manufacture and supply of laminated board of size 45cm x 60cm and 12mm thick with printed instructions as directed by engineer in-charge."Qty to be read as Per Board"
70
2268
158760
Making photocopies & binding of the SWR literature in English/Hindi/Diglot form as per Railway practice. "Qty to be read as Each Booklet"
6
179
1074
CHAPTER 40 - ALTERATIONS :: Removal of existing 'Q' style / K-50 contact clips along with its wire from the relay base by carefully tracing out from the bunch of wires and taking out 127 unwanted wires from the same as per the alterations shown in the circuit diagram issued by Railways. Drawing of fresh new wire from the relay base to another relay base as per the new wiring as shown in the circuit diagram without affecting the other wires. This also includes testing of wires using buzzer of the new wires drawn once before soldering, once after soldering (This includes of wires required for data loggers.)
4200
235200
235200
"Carrying out of alterations to the working circuits and fixing of relays and relay groups 128 and energization of relays as per approved circuit diagrams. (All materials such as Rosin core, flux, nylon thread, eyelets and PVC dotted tape to be supplied by contractor. Indoor cables, relays and relay groups, fuses, LEDs, Resistances will be supplied by Railways." "Qty to be read as Per Sheet of Circuit Diagram"
35
2091
73185
Shifting of existing working functions like signals/Shunt/ Calling on/Points/Track circuits 129 etc. from old cable to new laid cables carefully without affecting the traffic under disconnection/blocks, This work also includes releasing the existing tail cables from the relevant gears and re- surfacing the earth excavated as instructed by Railway representative at site. "Qty to be read as Per Cable"
345
2123
732435
CHAPTER 44-MISCELLANEOUS :: Fabrication and supply of wall mounted maintainer's 130 Tool Kit frame made out of MS sheet 10 gauge with powder coated as desired colour at site of size 1.5 Mtrs. Length X0.8 Mtr. Width X 0.15 Mtr. Depth with all fixtures for mounting individuals, tools inside the board and in front with Acrylic sheet 4mm thickness with locking arrangements and all necessary fixtures to fix on wall.
2
18699
37398
Supply and Installation of HP/OEM approved document Scanner/Printer/Fax A3/Legal size Resolution in dpi 300, speed in PPM 20, ADF capacity 50, Flat Bed Size NA, Document size Legal or latest or similar. (APPROVAL SHALL BE TAKEN BY OFFICERS BEFORE SUPPLY OF ITEM)
2
72290
144580
Providing the services of Computer oriented Technical manpower to carryout works like 132 drawing, computation, write up etc., between 08:00 Hrs to 20:00 Hrs of the day with all expenses of transportation, accommodation, food, consumables etc., with all ascents, descents, taxes, octorio, cess, fees, duties with contractors cost etc., as per special conditions/specifications/ regulations and as directed by engineer in charge.
650
784
509600
Provision of Lookout person round the clock in 12 Hours shift beat from Up Home Signal to Down Home signals to avoid theft of signalling assets.
850
640
544000
Arranging of skilled and unskilled workers with required tools during point blocks for removal of S&T assets to give way for track machines and re-fixing the removed assets after insertion/removal of point.
29
4102
118958
Provision of one skilled and 2 unskilled staff round the clock to attend to teething 135 trouble of the installation along with SI/CSI after the installation has been brought into commissioning. The work includes routine maintenance, failure restoration as per the direction of the SI/CSI. "Qty to be read as Per Month"
16
64951
1039216
CHAPTER 45-RELEASING OF S&T GEARS :: Releasing of the following equipments without causing damage, stacking neatly at a centralised place near the site of work as shown by the in charge, and handing over the same to the Stores depot as per the inventory made. (a) Releasing of hand plunger lock single/double along with switch extension pieces, stretcher bars, point/ trap indicators and other fixtures carefully without damaging the materials, accounting and stacking them neatly at a place as instructed by Railway representative at site.
3
1808
5424
(b) "Releasing of all the S & T gadgets at LC gates like SM slide instruments, illuminated 137 diagram board, block counter, termination box, telephones, emergency key box, LC gate barriers, cranks, wire rope etc. and concerned wiring, accounting and stacking them neatly at a place as instructed by Railway representative at site. After releasing any holes on the walls! floor are to be filled with cement mortar and plastered"
2
7232
14464
(c) Releasing of existing apparatus cases (Full/ Half/ Quarter size) without damage after 138 releasing the shelf planks, Terminal blocks, Fuse Blocks, Terminal Boards, Relays of all types EKTs, Secondary Cells, power equipments, 'E' type locks, etc., and breaking the concrete foundation. After releasing, the resultant pits are to be closed and consolidated by ramming and levelling. The released materials shall be accounted and stacked at a place as instructed by Railway representative at site.
180
2275
409500
(d) Breaking of concrete and releasing of STOP board/Warning board/ LEGEND boards 139 along with rails, accounting and stacking them neatly at a place as instructed by Railway representative at site. Also the resultant pits shall be re-surfaced and consolidating by ramming and levelling.
15
1196
17940
(e) Breaking of concrete and releasing the existing cable termination boxes, after 140 releasing the base plank, Terminal blocks, Fuse Blocks, Terminal Boards, cut rails, pipes, etc., closing the resultant pits and consolidating it by ramming and levelling. The released materials shall be accounted and stacked neatly at a place as instructed by Railway representative at site.
100
1518
151800
(f) Releasing of existing Block Instruments (all types), Block counters, batteries, block filter, block bell equipment etc., carefully without any damage, accounting and stacking them neatly at a place as instructed by Railway representative at site.
5
1342
6710
(g) Releasing of existing relay racks/ cable termination racks along with all the 142 terminals, fuse blocks, relays, with jacks, holding clips etc., 50 way boards, terminals, connecting wires, cables etc., carefully without causing any damage, accounting and stacking them neatly at a place as instructed by Railway representative at site. After releasing, the floor shall be levelled and cement plastered. "Qty to be read as Per Rack"
39
1497
58383
(h) Releasing of existing SM's control panel including base plank, and other gadgets 143 connected very carefully without causing any damage to the panel, accounting and stacking them neatly at a place as instructed by Railway representative at site. The resultant pit in the flooring shall be removed of all cable bits, levelled and cement plastered.
4
3979
15916
(j) Releasing of existing Axle Counter field equipment (transmitters & receiver coils) on 144 the rails at the entry/exit track circuits without causing any damage. Excavating the under the track for removing track devices, connecting cables and duly covering the cable duct. Disconnecting and removing of Amplifier (electronic junction box and other associated equipment from the location box and transporting to a central location for account.
5.5
955
5252.5
(k) Dismantling and releasing of existing Colour light Signals complete (up to 4 aspects) 145 with or without Route Indicators, calling on signals, shunt signals etc., carefully without any damage to the gadgets, accounting and stacking them neatly at a place as instructed by Railway representative at site. The work includes breaking the concrete foundation, closing the resultant pit and resurfacing it by ramming and levelling.
39
2333
90987
(l) Releasing of existing Route Indicators of different types including tail cables, carefully without causing any damage, accounting and stacking them neatly at a place as instructed by Railway representative at site.
15
1167
17505
(m) Releasing of existing ground type shunt signals along with surface base, signal 147 post etc carefully without any damage, accounting and stacking them neatly at a place as instructed by Railway representative at site. The work also includes breaking and removal of concrete foundation and refilling of the resultant pit by ramming and levelling.
26
1662
43212
(n) Dismantling and releasing of existing Point machines (all types) including ground connections and other accessories available complete without any damage to the gadgets, accounting and stacking them neatly at a place as instructed by Railway representative at site.
20
2042
40840
(o) Releasing of existing TLD boxes with stumps terminals after releasing all the bond wires. The released materials shall be accounted and stacked neatly at a place as instructed by Railway representative at site.
300
121
36300
(q) Releasing of Secondary cells and battery stands available in the battery room along 150 with connecting strips, wires and terminal boxes carefully without causing any damage to the batteries, accounting and stacking them neatly at a place as instructed by Railway representative at site. After releasing any holes in the walls/ flooring shall be filled with cement mortar and plastered.
4
4083
16332
(r) Releasing of all Power equipments (IPS, charger etc.) including equipment stands, 151 terminal boards, power panel etc., in the IPS room carefully without causing any damage to the equipments after disconnecting all the supply wires. The released equipments shall be accounted and stacked at a place as instructed by Railway representative at site. After releasing any holes in the walls/ flooring shall be filled with cement mortar and plastered.
4
9565
38260
(s) Releasing of existing control equipments - complete including way station equipments, telephones, power supply for way station equipment and telephones, along with all wiring, accounting and stacking them neatly at a place as instructed by Railway representative at site.
4
4550
18200
CHAPTER 46-TELECOM WORKS :: Installation, wiring, testing & commissioning of 2 wire DTMF Selective Calling Telephone with power supply.
24
922
22128
Straight through / derivation with/without transformer joints: Installation Thermo shrinkable jointing kits for straight through / derivation joints for LC gate, pump houses etc where VF 154 transformers are not required and derivation joint by using 2T transformer ( to be housed in the joint) . This includes tapping of nominated Quad at a specific location shown by the Railway Engineer at site to the jelly field cable already laid. All material including valco tapes except thermo shrinkable jointing kit shall be supplied by the contractor. "Qty to be read as Joint"
50
1449
72450
Fixing of 12/10 pair weather proof C.T. Box WAGO type and termination of 6 quad jelly filled cable on teak wood plank of size 375mm x 250 mm x 20 mm thickness.
14
340
4760
Installation of 100/50/20 pair Krone terminal Box on teakwood plank of size 330x200x25mm plank and wiring. Teakwood plank and other materials like screws, bolts etc to be arranged by the contractor.
8
375
3000
Termination of telecom cable at cable hut and panel room, fixing of block filter units and cable termination boxes to the wall in panel room, wiring VF transformers, block filter units, block 157 bell equipment including drawl of cable through GI / PVC pipe, termination on to terminals and doing other works associated with commissioning of derivation of block working as per instructions of supervisor in charge of work. Note: Cables, CTB, Filter units, Block bell equipment, VF Transformers, GI Pipe, and Cement will be supplied by Railways. All other materials including Angles, PVC pipe etc will be arranged by the Contractor.
3
2670
8010
Installation and commissioning of 4 Wire way station control equipment as detailed below: a) The way station equipment & Power supply unit are to be mounted on a rack as per Drg. No. 158 CORE/S&T/ALD /SK/436/95. b) The internal wiring should be wired between VF Repeater/ VF Transformer bay and MS Angle rack then to be extended to Dy.SS/ASM Table as per drawing shown in the sketch (All the wiring materials are to be provided by the contractor) except way station equipment & power supply unit
10
3922
39220
Testing and commissioning of the system: This work involves the Testing of 159 Underground six quad cables in each repeater section after laying and jointing. These readings to be recorded and supplied to Railway Engineer. This involves all the tests to be carried out such as measurement of loop resistance, insulation test, frequency attenuation, cross talk and noise level etc,
23
3292
75716
Provision of Emergency Socket. (a) Fabrication, installation and fixing of emergency 160 socket post, box and emergency socket as per the drawing No. OHE/1.6A/94. These emergency socket posts to be fixed along with the cable route at an interval of not more than 1 Km. Rail post will be provided by Railway. 161
7
2046
14322
(c) Painting and numbering of EC post with two coats of two colours of one feet each band with enamel paint of approved quality make like Asian, Nicholson and Berger and as directed by engineer in charge at site.
7
325
2275
Supply & installation of Rack 19" wall mount 17U with front glass door and lock and key including the following: 1. 1U Cable manager - 1 No. 2. 1U Cantilever tray - 1 No. 3. AC distribution box 5X5 amps - 1 No. 4. Front panel H/W PKT of 10 Sets - 1No. 5. Cooling fan of 230V AC operated
6
17545
105270
Installation of OFC related items:: Laying of HDPE duct 40/33 mm dia in the trenches and in protective works already provided.
17
7410
125970
Blowing of armoured optic fibre cable (OFC Cable supplied by Railways) into the duct supplied vide other NS item of supply portion by using blowing machine and associated works. 10% of 165 OFC length to be blown extra on both ends of Duct i.e. total 20% of Duct length. Before blowing the duct integrity shall be tested. If any defect is found during duct integrity test, the entire length of HDPE duct from one chamber to another chamber is to be replaced by the contractor at his own cost. Payment will be made as per the length of Duct from which OFC is Blown. 166
17
10956
186252
Excavation of jointing pit and provision of RCC/FRP joint / Loop chambers of 90 Cms. Inner dia 60 Cms depth and 3mm thickness with two pieces of top cover with hooks each and bottom 167 cover with hole for drainage and cable entry as per Drg. No. RAILTEL/SR/OFC/ 2009/12 and as directed by Engineer to be provided at every joint location and at every Kilometre loop etc., The chamber shall be filled with sand mixed with anti-stermic power, back filling and ramming of trench after HDPE duct laying, splicing and commissioning.
24
6344
152256
Supply and Installation of OFC joint enclosure and splicing of Optic fibre cable (24 fibres) and testing as per technical specification No. GR OJC-2/02 Sept 2003. Supply of Splice 168 Enclosure (24 fibre) shall be of TVS make Part No.1500-L18X-XX or similar as per Board specification of TEC.& as per RDSO/SPN/TC/68/2014 Revision 1.0 amd 1 or latest . All materials including Fusion splicing machine used for fibre splicing and, OTDR for testing and other testing materials if any shall be arranged by the contractor.
19
9398
178562
Supply and installation of rack mounted 24 fibre Distribution Management System 169 (FDMS) of size 1U, of Reputed/Branded company make as per specification RDSO/SPN/TC/37/2020 Revision 4.0 with latest amendments. The FDMS shall include 24 SC-PC/Required adaptors having insertion loss less than or equal to 0.1dB and 24 numbers 900 micron 1.5m SC-PC/Required pigtails. (CONSIGNEE inspection)
8
23712
189696
Testing of fibres between short haul station in both direction after splicing the required fibres
13
7769
100997
Supply and installation of 45mmx 45mm PVC channels for drawing switchboard cables at OFC cable huts and at stations as indicated by Railway Engineer at site.
1100
102
112200
Supply and fixing of different sizes of PVC casing /Pipes as required by Railway at site by fixing /clamping to the wall for indoor wiring purposes. All the material required for fixing PVC casing/Pipes are to be supplied by contractor.
400
48
19200
Supply and installation of 230 volts AC / 48 volts, 25 Amps DC (2 + 1 configuration) SMPS battery charger as per RDSO spec. RDSO/SPN/TC/23/99 (Ver-4) Amdt.-1 or latest. (RDSO inspection)
2
83721
167442
Supply and installation of 48 volts 200 AH maintenance free VRLA battery in charged condition as per RDSO specification IRS:S-93/96(B) (Amd. 1 ) or latest. (2 volts 200 AH - 24 Nos. each set). (RDSO Inspection)
2
104042
208084
Supply and installation of 19" - 42 U Rack complete with fittings for housing SDH equipment, FDMS, DDF and other equipment like cable managers, completely wired using krone module and other equipment like runaway ladders etc., as per technical specification below. It should be able to lock all the equipment with only order wire Telephone outside the rack. The rack should be 176 of APW President / Rittal make or similar. The components of the rack are specified below. It includes transportation and installation of rack in prefab/building at specified stations. 1. Rack S33 42U 600'W x 600D - 1 No. 2. Fixed side panels 42U x 600 D - 2 Nos. 3. Front Glass door plain 42U/600W - 1 No. 4. Rear MS Door Plain 42U/600W - 1 No. 5. Castor with brakes-2 Nos. 6 Fans directly mounted on the top 48V DC 90 CFM-2 Nos. 7. Krone mounting bracket - 01 Nos. 8. MCB Mounting panel with MCBs - a. 32 Amps, MCBs(DP) - 2 Nos. & 6Amps MCBs (DP) - 6 Nos. 9. Earth continuity Kit - 01 No. 10. Equipment Trays - 5 Nos. 11. Channel with cable loops 42U - 2 Nos "
6
41962
251772
Supply, installation, testing and commissioning of managed expandable rack type STM- 4, equipped STM-1, ADM S1.1, as per technical Specification no.GR No.: TEC/GR/TX/SDA- 003/02/APR- 2010 with 2 Nos.STM-1 aggregate Optical interface upgradable to STM-4, 21 E1s, and minimum 8 Nos. of 10/100 base T Ethernet port, Order wire, Power supply unit, sub rack, DDF, Installation materials, 177 manuals and other accessories. The equipment should be TEC/BSNL/RDSO approved .The equipment should be fully wired for its ultimate capacity and provide redundancy for Power supply and Synchronisation. It shall be possible to use the full capacity of the equipment by adding additional tributary cards. The up gradation of STM-1 to STM-4 shall be without change of any internal hardware of the STM equipment. The STM equipment shall have in-built L2 switch for Ethernet ports. Make -Tejas or similar. (RDSO Inspection)
4
311694
1246776
Supply, installation, testing & commissioning of LI (Optical) card for branching for STM- 1 suitable for working STM in the deployed section.
4
43247
172988
Supply and installation of programmable Primary Digital Drop Insert Multiplexer fully wired for 30 Channels complete with all accessories from RDSO approved vendor as per RDSO specification IRS TC 68-2012 Rev.0 (with latest amendment) including connectors and cables required for installation including 100 pair Krone type MDF. Each channel card shall have minimum four channels per card. The single sub rack shall be capable of being equipped up to min. 60 Channels 179 without additional power supply unit. The MUX shall be wired & equipped with following circuits: (RDSO INSPECTION) 1. 2 Wire/4 Wire E&M VF circuits (Minimum 16 No. Ckts) (RDSO inspection) 2. FXO circuits: 6 nos. 3. FXS circuits Subs/Hotline circuits along with ringer card etc.: 08 No's 4. Acquisition card as per design 5. Data User manual. 6. This also includes connecting all pigtails, optical patch cords etc to the SDH equipments. This also includes connection of SDH and primary MUX equipment with all interface cards to the 48V Bus including termination on DDF taking PVC cable over runway or a wall and termination of VF interface circuits to the Krone Termination box
4
274869
1099476
Supply of FXO (exchange end interface card) as per specification No. IRS-TC 68/2012 rev.o amd.1 with latest amendments, to be installed in Primary Drop insert Multiplexer having minimum 8 channels per station. (RDSO Inspection)
2
71031
142062
Supply of FXS (subscriber line or hot line interface card) as per specification No. IRS-TC 68/2012 rev.0 amd.1 with latest amendments to be installed in Primary Drop Insert Multiplexer. Facility to drop 4 channels per station should be available. (RDSO Inspection)
2
80730
161460
Other Miscellaneous Telecom Items :: Installation of power supply unit (230V AC input, 12V DC output and 7AH battery) at ASM office.
4
426
1704
Digging of cable pit for the required depth and width to locate the cable at a specific location shown by the Railway Engineer at site to attend the cable fault and refilling the same after attending the cable fault by the department.
10
1142
11420
Maintenance of 6 quad cables till handing over or at least for six months. This includes 184 regular testing of Quad parameter from Station to Station, EC socket testing and recording in format specified by Railways. This item will commence only after joint testing of 6 quad cables with required parameters in a block section. (a) Replacement of EC socket wherever found missing broken or defective in the above section as per technical specification. EC socket will be provided by Railway
7
249
1743
(b) Replacement of EC box with top plate for mounting rectangular 6 pin EC socket in the above section as per technical specification. EC box will be provided by Railway.
7
870
6090
(c) Localisation and restoration of fault at /beneath EC socket as per technical 186 specification. This include testing of EC socket, finding fault with fault locator, Taking out underground derivative joint, Restoration of derivative joint and safeguarding derivative joint in ground. "Qty to be read as Per Location Box"
7
7703
53921
(d) Localisation and restoration of fault on main cable as per technical specification. This involves localisation of fault with fault locator, digging out coil pit, jointing cable (Jointing Kit will be provided by Railways) and closing of coil pit. "Qty to be read as Per Location Box"
14
10041
140574
"Supply & Laying of G.I Pipes with medium and threaded collar & coupler, quality to specification IS.1239 (part-I) 1990 and galvanised to specification IS 4736-1986." (a) G.I Pipes of 50mm diameter RMT 1032. Material shall be inspected by RITES 190
300
1032
309600
"Supply and fixing of location box particulars in prescribed format, particulars to be printed on a good quality flute board, location particulars will be supplied in a register by Railways. 191 Same will be provided back in A4 format sheet for check print, after finalizing check print, final particulars to be supplied and fixed as described above (Soft copy to be given to drawing office on a suitable storage device - Pen drive of suitable capacity) and also make hard copy of location particulars to be supplied in A4 format."
314
762
239268
Supply & erection of lattice type tripod towers of GI 15 meters of height as per SCR Drawing No. SC 23000- 23012, casting of foundation with 1:2:4, 20mm metal and river sand to be 192 used. Provision of earth electrode near the tower and connect the same to tower which is to be erected above the station building/at the site shown by the site Engineer of the Railways. Cement shall be supplied by Rlys. Work includes installation of the antenna, drawing the cable and installation of the battery and 25W set and commissioning the system. 25W set, cable, antenna, battery will be supplied by Rlys.
2
41930
83860
"Provision of temporary signalling arrangement during Non Interlocked working of 193 Signals and Points, such as erection and wiring of temporary relay racks and wiring of relays, SM's slide instruments, wiring alterations in the cable termination rack, apparatus cases, signals, Control panel etc, as per the instructions of Railway representative at site. all other miscellaneous material shall be supplied by contractor"
4
25451
101804
Supply of Hot Standby Electronic Interlocking System (Centralised/ Distributed) excluding Panel Processor (Hot Standby) with Signalling functions up to 125 functions as per function table enclosed along with 5% spares for the cards/modules/PCB, connectors/couplers, fuses, all relays, 1 crimp contact, convertors etc. used, tools, manuals and Instruments as per RDSO specification RDSO/SPN /192/2019 ver. 2.0 or RDSO/SPN/ 203/2011 ver. 1.0 or latest. Note: Payment will be made for only vital bit as per function table attached by Railways, no payment will be made for non Vital bits such as Counter bits, SM key Bits, Read back bits and any potential free contact bits of DC-DC converter or Modem of El. (MATERIAL SHALL BE INSPECTED BY RDSO)
1
7832317
7832317
Incremental rate for vital signalling functions in El SYSTEM over and above 125 2 functions under item No 4101 along with spares for the cards/modules/PCB, connectors/couplers, fuses, all relays, crimp contact, convertors etc. to the extent of 5% of item no. 4101 & 4102 (MATERIAL SHALL BE INSPECTED BY RDSO)
69
71250
4916250
Supply of commercial grade operator VDU of size 55' Full HD, with backlit LED, with HDMI/DVI port, Inbuilt Speaker, required HDMI/DVI cables for onnectivity and other miscellaneous item required for installation (APPROVAL SHALL BE TAKEN BY OFFICERS BEFORE SUPPLY OF ITEM)
2
226320
452640
Supply of fan less embedded industrial grade computers (Similar to Moxa V2406A or better ) with all accessories such as key board, mouse, antivirus etc. of ndustrial grade as per approved Specification as recommended by RDSO (TAN No. STS/TAN/3007 Version 1.0 or latest) (APPROVAL SHALL BE TAKEN BY OFFICERS BEFORE SUPPLY OF ITEM)
2
182900
365800
Installation, wiring, testing, soldering of all El equipments, earthing of El Equipment, Relay Racks and Power Equipment etc. including supply of power able and Documents/Manuals (six set) etc. for El under item no. 4101. "Qty to be read as Per EI System".
1
659159
659159
Design and Drawing of Interface and Application Logic for complete indoor signalling 6 work for new El station up to 200 Routes as per TOC. Initially, ontractor shall submit 1 copy for approval of Railways. Final copy shall be submitted after incorporating correction if any. "Qty to be read as Per EI System". 7
1
253418
253418
Commissioning of Electronic Interlocking system.
1
25604
25604
Training of Railway Personnel in installation, commissioning, testing, trouble shooting and in diagnosing faults using diagnostic tools/flow charts including supply of necessary documents.
40
1246
49840
Training on application software for designing, change in the logics and converting it suitable for system and loading the programme into the working ystem for alteration of SIP/TOC. The training should be comprehensive with complete document.
40
1368
54720
Supply of portable work station to run along with EI configuration tool, Data Inputs, Simulation, Functional testing, diagnostic and troubleshooting. (APPROVAL SHALL BE TAKEN BY OFFICERS BEFORE SUPPLY OF ITEM)
2
126896
253792
Fabrication, Transportation and fixing of aluminium ladder at site made of Aluminium angle of size 38mmx5mm width 280mm ,Flat size 25 mm x 5mm with powder coated colour as 11 desired by engineer in charge at site and fixing, Drilling of suitable holes for fixing of Hylam sheet 3mm thickness on ladder and 2 No's of PVC trough 100 mm with cover fixed on Hylam sheet along the ladder with all fixtures necessary ancillary materials required for fixing to be supplied and as directed by engineer in charge at site
400
4098
1639200
FIRE ALARM SYSTEM RELATED ITEMS : Supply of MiniumSingle Loop Analog 1 addressable Fire Alarmsystem with loop capacity of connectingminimum 30 detector and/or modulesmaximum 50 devices. The panel shall havea built in power supply and battery chargeras per RDSOSpec.No.RDSO/SPN/217/2018 Ver.2.0 orlatest. Material shall be inspected by RDSO
7
204682
1432779.6
Supply of Multi Sensor detector DualOptical/Thermal with rotatories and backboxes including base as per RDSOSpec.No,RDSO/SPN/217/2018 Ver.2.0 orlatest. Material shall be inspected by RDSO
73
9800
715400
Supply of Addressable Double actionindoor manual call point with back box(RED) including with key as per RDSOSpec.No.RDSO/SPN/217/2018 Ver.2.0 orlatest. Material shall be inspected by RDSO
7
5800
40600
Supply of Sounder cum strobe havingrange of 81 dbA as per RDSOSpec.No.RDSO/SPN/217/2018 Ver.2.0. orlatest. Material shall be inspected by RDSO
14
6900
96600
Supply of Analog LHS Cable RDSO Spec.No. RDSO/spn/217/2018 Ver.2.0 orlatest. Material shall be inspected by RDSO
350
1475
516250
Supply of Analog Controller/LHS cable along with interface module to connect LHS controller with Panel. RDSO Spec.No.RDSO/spn/217/2018 Ver.2.0 orlatest. Material shall be inspected by RDSO
7
102223
715563.8
Supply of 2 core 1.5 sq.mm FRLS Copper unarmored Fire Survival Circuit Integrity cable (inside) with necessary clamps and fittings Spec.No.RDSO/SPN/217/2018Ver.2.0. or latest. Material shall be inspected by RDSO
1050
194
204435
Supply of 2 core 1.5 sq.mm FRLS Coperarmored cables with necessary clampings and fittings, RDSOSpec.No. RDSO/SPN/217/2018 Ver.2.0. orlatest. Material shall be inspected by RDSO 11
350
140
49000
Supply of Isolator Module. Material shall be inspected by RDSO
21
6683
140353.92
Supply of Multi Lamp Route Indicator (LEDSingle Digit ) from 1-9 with WHITE LED without housing as per the following. Material shall be inspected by consignee
3
49000
147000
Fabrication, Supply, and installation ofpowder coated cabinet, for the terminationof power cables. The body of the cabinet tobe made of 3mm thick. This includes sizingbending, providing 13 holes 6mm dia on flatof size 3mm x 25mm for mounting 1 wayPBTs and 40mm dia holes on top & bottsurface. 6 Nos. on each side with provisionof grommet bushes for cable entry, as perthe drawing supplied by the railways. Colorof powder coating as per instructions ofsite engineer in charge. All the materialswill be supplied by the contractor except 1way PBTs. Material shall be inspected by Consignee
14
3040
42560
Supply of PVC tags of 3.6 mm x 300 of 1packet consists of 100 pieces. Make- NOVOFLEX or similar. Material shall be inspected by Consignee.
800
88
70400
Supply of PVC tags of 3.6 mm x 150 of 1 packet consists of 100 pieces. Make- NOVOFLEX or similar. Material shall be inspected by Consignee.
800
55
44000
Supply of LED based stencil type route indicator (2Way) white LED (With Housing) as per specification . Material shall be inspected by Consignee.
10
62000
620000
Supply of Multi Lamp Route indicator (LED Double Digit ) from 1 to 19 white LED (With Housing) as per specification. Material shall be inspected by Consignee.
3
94720
284160
Integrated OFC device MAPLE 4CS device 1U height & 19" rack mountable supporting E&M/FXO/FXS & Ethernet, with built in OFC ports supporting Single mode fibre for connecting 18 stations/IBH on dark fibre; Two E1 interfaces to be available with cross connection feature; unit support dual power supply DC main/Stand by DCor AC in lieu of DC through adaptor (AC-DC through adaptor to be supplied); E&M 2W/4W 08 port module to be provided, which is configurable; 10 port Auto phone module & 10 port hot line module & 100Mbps Ethernet to be avialable in the unit; Unit is SNMP complaint, MAKE: MROTEK/ WAVES/ FABIO or similar. Material shall be inspected by Consignee.
6
176702
1060212
Supply of Set of modular type terminal block 4.0 sq. mm as per WAGO 4.0 Sq.mm ( 19 281-652) 4- conductor through terminal block with its jumper/shorting link(281-402) suitable for DIN rail channel fitment (EIC-60947). Make: WAGO MAKE, Part No. 281-652 & 281-402.or similar . Material shall be inspected by Consignee.
220
51
11422.4
Supply of 1. Insulated Hexagon Socket, Size: 3/8"" SQ DR 6mm short 2. Insulated Hexagon Socket, Size: 1/2"" SQ DR 8mm short 3. Insulated Hexagon Socket, Size: 1/2"" SQ DR 18mm short 4. Insulated Hexagon Socket, Size: 1/2"" SQ DR 19mm short 5. Insulated Hexagon Socket, Size: 1/2"" SQ DR 20mm short 6. Insulated Hexagon Socket, Size: 1/2"" SQ DR 22mm short 7. Insulated 20 Single End Spanner, Size: 10mm 8. Insulated Single End Spanner, Size: 12mm 9. Insulated Adjustable Wrench, Size: 8"" 10. Insulated Adjustable Spanner, Size: 12"" 11.Insulated Reversible Ratchet, Size: 3/8"" SQ DR 200mm 12. Insulated Reversible Ratchet, Size: 1/2"" SQ DR 280mm 13. Insulated T- Handle, Size: 1/2"" SQ DR 200mm 14. Insulated Extension Bar, Size: 1/2"" SQ DR 125mm 15. Stanley make Water-Proof Medium Nylon Tool Bag 16. Electricians TRMS digital multimeter 17. MECO Clamp meter 3690 AC/DC 600A 18.Best Indian make electrical hand gloves suitable for 1000V Make: Tolsen or similar. Material shall be inspected by Consignee.
3
57256
171768
Supply of data analizing system for telecom, STM, PD MUX installation work with specifications Dell 1000@ 7200 RPM GB HDD 64 2 Processor with Standarad Display 23.8 (inches) , RAM 8 GB DDR 4, Intel Core i5 Processor with Operating System windows 10. Note : Prior approval shall be taken by officers before supply.(Inspection = Consignee)
-
-
21
RICHO Digital Colour Printer Model; MPC 20115P with Copler Networking colour Printer. Colour Scanner Duplex & ARDF with 2KV Stablizer & Trolly (Ironb Stand) And any same /Simillar make. Note : Prior approval shall be taken by officers before supply. (Inspection = Consignee)
2
250000
500000
Supply of UPS of 2 KVA similar to APC make or latest. Item shall be inspected by Consignee.
3
14000
42000
Supply of VHF Digital Radio set with standard Accessories, 6 DB GP Antenna, Co-axial 24 RG-213 Cable 30Mtr with both End connectors 30Mtr, Power Supply Unit for Base station 10 Amp, Battery 12V DC 80 AH. Make: Motorola XiR M8668i or similar. Material shall be inspected by Consignee.
2
109504
219008
Supply of digital cross talk measuring set as per spec. no IRS-TC 45/88 with latest Amd. Item shall be inspected by Consignee.
1
24000
24000
Supply and Installation of DIN Rail. Item shall be inspected by Consignee. "Qty to be read as Per Location"
70
4600
322000
Digital Psopho meter make APLAB Model No.1072 refer technical specifications. (Inspection by Consignee)
1
25000
25000
Fabrication, Supply and installation of teakwood columns with Glass counter table on VDU comprising of the following 1) Teakwood columns of size 2 ft x 3 inches x 3inches = 4 Nos and 1.5 ft x 3 inches x 3inchers = 2 Nos with raanda smoothinclude round design turning structure with220 1 No. emery smooth work 2)Transparent Glass (Modi) 1.5 ft x 6ft x12mm = 2 Nos and 1 ft x 6ft x 12mm = 1No with machine glass polish to flat edgesinclude etching work on transparentglasses 3) Teak wod columns fixing on VDUtable with Nuts, Bolts & Washers whereever required. Necessary suitable sizes willbe provided as spares. After fixing kiwapolishing with Asin Touch wood neatfinishing on columns included Glassinserting work on teak wood columns.Included site transportation withinstallation charges. Material shall be inspected by Consignee.
2
33500
67000
Supply, installation, wiring and commissioning of NI panel made out of MS sheet 16 2 guage of size 1200mm height x length 1200mm x depth 600mm with powder coated and also two relay frames fixed inside the panel for fixing of relays and wiring and all the internal wiring between signals, track circuits upto termination point with 200 wagos duly wired.Item shall be inspected by Consignee.
2
51200
102400
Non Interlocking Circuit wiring of NI Rack/ CT Rack in Relay Room for one station. This 3 includes wiring of relay base plate to other base plate, to IDF, to tag block, wiring of circuits as per approved NI wiring diagram, jumpering and soldering after testing, power equipment, NI operating panel, key lock, test boards,etc., fuse boards etc.Qty to be read as "Per Station"
2
57676
115352.72
Co2 Fire extinguisher : Supply and commissioning of Co2 fire Extingusisher6.5 kg capacity conforming to ISI markprovided with all fitting and accessoriesMake:Safex/Bharat or Similar. (Inspection:Consignee.)
18
23000
414000
Supply and laying of 50 Sq.mm. insulated copper cable in suitable PVC pipe. All other materials required for installation to be arranged by contractor. Material shall be inspected by Consignee.
1400
700
980000
Installation, testing and commissioning charges of fire alarm system includingprogramming of devices, fire alarm paneland LHS
7
58500
409500
Full location Box: Supply and fixing of GIflat of size 1050x25x3mm as given in drawing 7 no. RVNL/S&T/SC/06/2016 to connect all cable armous to earth point with suitable nuts/ bolts as given below A)GI nuts/bolts of size 8x25mm with two flat and one spring washer of 23 set B) GI nuts/bolts of size 12x40mm with two flat and one spring washer of 02 set as per site incharge. Material shall be inspected by Consignee.
270
888
239905.8
Half location Box: Supply and fixing of GI flat of size 550x25x3mm as given in drawing 8 to connect all cable armous to earth point with suitable nuts/ bolts asgiven below A)GI nuts/bolts of size8x25mm with two flat and one spring washer of 13 set B) GI nuts/bolts of size12x40mm with two flat and one spring washer of 02 set as per site incharge. Material shall be inspected by Consignee.
50
548
27435
Supply and Installation of Ultrasonic HighVariable Frequency Rat Repellant. Make:Varna or similar. Material shall be inspected by Consignee.
144
2625
378000
Fabrication, supply & fixing of stay rods for wiring support at location boxes, CT racks etc.. This includes providing sleeve to stayrod, fixing of bolts, nuts & washers etc as required at site. Note : Qty unit to be readas Each Rod.
800
265
212400
Independent checking and verification of interface circuits for stations having upto25 routes by IRSE/IRSTELO LicenseHolders
2
50000
100000
Independent checking and verification of application Logic circuits for stations having upto 25 routes by IRSE/IRSTELO License Holders
2
125000
250000
Additional payment for checking andverification of Interface circuits and Logic circuits having more than 25 routes by IRSE/IRSTELO License Holders. Note Incase of alteration in approved SIP and TOC payment shall be applicable per route basis as per item. Qty to be read as per Route
325
5400
1755000
Supply. installation. testing and commissioning of Fixed 2 mega pixel bulet- network camera with housingSpecification : 1/2.8 Progressive Scan CMOS, Digital WDR, 3D DNR, 10 meters IR range, 12V DC±10%, ICR. Make:HIKVISION or similar. Material shall be inspected by Consignee.
30
7665
229958.4
Supply. installation. testing and commissioning of 8CH NVR network video recorder. Make: HIKVISION or similar. Material shall be inspected by Consignee.
7
20657
144600.96
Supply, installation, testing, commissioning of 2 TB surveillance hard disc suitable for 8Channel NVR to store the video footage upto 15 days. Make: Seagate / Western or similar. Material shall be inspected by Consignee.
7
7269
50883.14
Supply and installation of 19.5 inch Monitor with all connecting cables tomonitor cctv cameras at location. Material shall be inspected by Consignee.
7
10653
74574.08
Supply, installation, testing and commissioning of 8 port 10/100 POE ethernet switch. Make:DIGISOL/HIKVISION/D-LInK or similar. Material shall be inspected by Consignee.
7
17149
120046.08
Supply, installation, testing and commissioning of 12 port 10/100 ethernet switch. Make: DIGISOL/ HIKVISION/D-LInK or similar. Material shall be inspected by Consignee. 20
7
8444
59113.6
Overall commissioning of cameras andarrange network to headquarters
7
32480
227360
Supply , fixing and termination of RJ-45jacks to CAT-6 cable. Make:D-Link or similar. Material shall be inspected by Consignee.
190
15
2962.1
Supply and fixing of 40mm PVC casing and caping on the walls, All required fixingitems for fixing has to be arranged. Material shall be inspected by Consignee.
900
67
60804
Supply and installation of 12U Rack with depth of 600 mm along with power manager, trace and cooling fans with all accessories. Material shall be inspected by Consignee.
7
12000
84000
Manufacture and Supply of Tele Console Cabinet (1000X 1500mm) as per following 24 details: a) Complete body fabricated as per drawing with 1.6mm MS Sheet. b) Double door arrangement with 1.2mm MS Sheet with locking arrangement. c) Separte box for Battery with door . d) Smm clear acrylic sheet will be fitted in the doors. e)Equipment fixing; arrangement with hinged frame in the body. f) Cable troy fixing arrangement as per drowing . g)Three point locking arrangement on one door and tower bolts on second door.Universal Lock and cum lock arrangement for battery box. h) Powder coating of all metal parts i) PVC cable troys as per requirement assembled in position. j) DIN rails as per requirement assembled in position.
3
26748
80244.72
"Excavation of trench of size 15cm x 30 cmon platform with different surfaces dulycutting the platform with tile/platformcutting machine and laying of cablethrough CPVC /G I pipe of required size atsite duly removing the existing platform surfaces such as shabad stone, granite etcwithout damaging. The surface of theplatform to be restored to its originalshape afEer completion 25 of the work. Incase the surface platform stones aredamaged, the contractor has to arrange forthe stone/tiles of the similar type at hisown cost . During digging all precautionsto be taken to avoid inconvenience to thetravelling public. The work is to be carriedout preferably when the platform is freefrom occupancy protection barricading arrangement has to be done on platform till the work is completed. All materialincluding CPVC/GI pipe has to be arranged by the contractor as per the site condition.
1000
433
433000
Wiring of point machine as per the wiring diagram duly disconnecting and rearranging 26 the working wiring as per instructions of engineer in-charge and testing from new panel for all safety checks and restoring back the working wiring to the previous state and again testing the point for all safety check. The above work is to be carried out under traffic conditions duly observing train movements. All materials except wire coils and point TLJB is to be arranged by the contractor
80
1577
126160
Installation of MAPLE 4C or Similar reputed make Equipment at Station for BPAC/Other circuits working on OFC 28
6
8427
50562
Provision of skilled labour as per instructions of Site Incharge.(Per Unit=Man Days)
800
625
500000
Supply and spreading of 20mm ballast for Perimetric Earth/Ring Earth of S&T buildings. a) Supply/material 30
850
863
733550
b) Erection/Labour 31
15
5
75
Provision of skilled labour as per instructions of Site Incharge 32
565
625
353125
Provision of un-skilled labour as per instructions of Site Incharge
565
443
250295
Construction of cable coil pit back side of relay room , Goomty and IB hut etc., as per 33 site requirement, it includes digging of pit, construction of side walls with bricks, coilling and bunching of cables, filling the pit with sand and minimum 10cm layer of concreting on top with 1 cement : 3 sand :6 graded stone aggregate of 20mm normal size. All Material and labour for the work to be arranged by the contractor . Item to paid as for size of pit in cubic metres.
125
3867
483482.5
Supply of aspiration type smoke detector. Highly sensitive smoke aspiration system for monitoring of rooms and equipment's for earliest possiable fire Detection for relay rooms as per RDSO Spec No. RDSO/SPN/217/2018 ver.2.0. Material shall be inspected by RDSO.
6
610731
3664386
Supply and Installation of Air sampling CPVC Pipes with all required accessories for aspiration system. Material shall be inspected by Consignee.
6
65670
394020
Supervision, Programming, Installation, testing and commissioning of Aspiration smoke detection supplied.
6
72237
433422
Supply and placing of Smart RFID Marker (SM 1500 Telephone HSN Code 90314900- part No.SML 1014 or similar) in Cable Trench. Material shall be inspected by Consignee.
800
2265
1812000
Supply of RFID Marker Locator Telephone HSN Code 90318000 part No.SML - T or similar. Material shall be inspected by Consignee.
2
333350
666700
Supply of Plotter cum scanner IPF TX 5300 MFP with LT36 scanner specification type - multi function wide format printer size A0-A4 type of printing colour, printing technology inkjet, 39 printing speed ((Prints per minute) AO DPI:2400x1200, 2048x1200, 2048 MB memory , 500GB Harddisk , print application, line drawings , RENDERRINGS, COATED PAPER, TRACING PAPAER, GLOSSY paper self adhensive vinyl banner cloth media weight andling range (gsm) 280, ink colour, minimum 5 roll handling capacity (no) 2 size of rolls to be handled (width x OD OF ROLL:36 INCHES POWER CONSUPMTION in sleep mode (watt) 3.6 power consumption in print mode (watt) 105 make:HP/canon/EPSO or Better ( PRIOR APPROVAL OF OFFICERS SHALL BE TAKEN BEFORE SUPPLY). Material shall be inspected by Consignee.
1
644000
644000
Supply, Installation, Testing and Commissioning of power supply unit 24VDC, 5Amps, (As per RDSO Specification No. RDSO/SPN/217/2018 ver 2.0 or latest). Material shall be inspected by RDSO.
5
61600
308000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%