South Central Railway Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
South Central Railway - SCR Tender
Electrical and Electronics
Electrical Works
Ireps
Opening Date16 May 2024
Closing Date6 Jun 2024
Tender Amount₹ 6,77,77,581.33
Costs
EMD
₹ 4,88,900Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
(1) Bantanahalu Station - Signalling Arrangements In Connection With Provision Of New Electronic Interlocking System.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
01-SNT-06-2024-GUNTAKAL DIVISION-S AND T/SOUTH CENTRAL RLYTender No
01-SNT-06-2024Tender Authority
South Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of drive lug insulation for universal point machine (To be procured from RDSO approved firms). (One set consists of one number central insulation plate, bushes - 2 No. and washers - 4 No.). Inspection by Consignee.
60
109
6540
... More
Supply of Electric Key Transmitters single complete to drg.no.SA.22601/Alt-4& IRS S.21/2001 to ward no. specified. Inspection by RDSO.
9
4767
42903
... More
Supply of track feed battery charger 110V/AC input to charge 1,2,3 lead acid cells with 10A capacity and with potential free contacts as per Spec No IRS: S.89/93 with amendment no.2 or latest. Inspection by RDSO.
35
2300
80500
... More
Supply of track feed regulating resistance disk type 0 to 30 Ohms as per Drg. No. SA. 20161/66/M or latest. To be procured from RDSO approved firms.
35
243
8505
... More
Supply of B type chokes to specification no.IRS-S.65/83 to amendment no.1 or latest.
70
1604
112280
... More
Supply of Track lead junction boxes fiber glass as per Drg.No.CWM-00597of F.R.P material to 9 IRS.S.23 specification along with fixtures i.e. on MS angle 50x50x5mm, 0.9 Meters long two numbers of G.I. pipes of 25mm dia. along with nuts and bolts and 500mm long pipe (this includes gromite bushes, 60mm PBT terminal). Inspection by Consignee.
180
1057
190260
... More
Stationary low maintenance secondary lead acid cells 2V-80AH as per RDSO specification IRS-S- 88/2004 with topping up frequency upto 6 months. This includes supply of inter cell connectors, bolts nuts, acid level indicating floats and vent plugs. Inspection by RDSO.
200
2190
438000
... More
Supply of electric track drilling machine similar to model no WD-34 C, RALLI WOLF make with suitable horizontal stand with attachments to drill holes of various sizes upto 7mm to 13mm. Inspection by Consignee.
2
15161
30322
... More
Supply of Digital Multimeter Fluke or Rishab 15S. Inspection by Consignee.
4
5720
22880
... More
Supply of titanum coated 7.2mm drill bits of Bosch/Addision make. Inspection by Consignee.
120
94
11280
... More
Supply of Wire rope 6/19 steel 6mm dia with fiber core as per specn IS 3459/2004 or latest with PVC sheathing of 2 mm thick type 6 compound IS 5831/1979 or latest (outer dia 10mm.). Inspection by Consignee.
120
76
9120
... More
Supply of wire rope steel galvanised 6/19, 26 SWG for double wire signalling to specn. No. IRS. S3- 61,Amd-1. Inspection by Consignee.
120
81
9720
... More
Supply of relay fixing frame for Full location box. The frame should be made out MS angle of 25mm X 25mm X 3mm and approximate size of 940mm X 150mm with suitable holes to fix the same in the box. Inspection by Consignee.
110
591
65010
... More
Supply of 'E' type locks of different wards as per requirement with key ( E- type lock to Drg. No. SA.3376/M/Latest and RDSO Specn. No. IRS. S.30/64). Inspection by Consignee.
160
560
89600
... More
Supply of terminal block 1 way PBT 60mm as per RDSO Drg.No. SA.23745/Alt.5 & IRS S.75/91 & IRS.S.23 with latest amendment. Inspection by RDSO.
1050
61
64050
... More
Supply of terminal block 6 way PBT 25mm as per RDSO Drg.No. SA.23756/Alt.3 & IRS S.75/91 & IRS.S.23 with amendment no.2 or latest. Inspection by RDSO.
850
285
242250
... More
Supply of Battery charger of 230Volts AC / 110V DC 30 Amps single phase, signalling / telecom. Instrument as per RDSO Specn. IRS S.86/2000 Amd.1 or latest. Inspection by RDSO.
1
74911
74911
... More
Supply of Hydro meter. Inspection by Consignee.
26
191
4966
... More
Supply of 35 Sq.mm Multi-strand single core PVC insulated copper cable as per IS:694 for connecting Main earth electrode to MEEB in the equipment room in duplicate. Inspection by Consignee.
100
303
30300
... More
Supply of DWC pipe of 180 mm outer dia/ 153 mm inner dia in lengths of 6 Mtr with coupler to IS specification No.14930 Part-II.The IS spec shall be marked on the pipe. Inspection by RITES.
300
2640
792000
... More
Supply of DWC pipe of 63 mm outer dia/50 mm inner dia in lengths of 6 Mtr with coupler to IS specification No.14930 Part-II.The IS spec shall be marked on the pipe. Inspection by RITES.
300
600
180000
... More
Supply of Thermo shrinkable jointing kit as per Spec. No. IRS TC. 77/2010 (Rev 2) for all types joints suitable for 6 Quad Jelly filled UG cable. Inspection by RDSO.
20
1923
38460
... More
Supply of Data Logger with 512 Digital inputs and 32 Analog inputs for remote monitoring with net work facility of signalling parameters and power supply arrangements to confirming to Specn. No. IRS. S.99/2006 with 64 input digital card as a spare and fuse monitoring PCBs for monitoring at least 50 No. of 2 Amps fuses, with inbuilt modem cards for networking. Inspection by RDSO.
1
383224
383224
... More
Supply of Front end processor with charger of 12 volts, 4 amps and battery of 12 volts 40 AH sealed maintenance free as per Specn. No. IRS S.93/96A for networking of Data Loggers. Inspection by Consignee.
1
97442
97442
... More
S u p p l y o f P V C insu la ted wire multi-strand copper conductor 10 Sq.mm flexible Specn.IRS.S76/89.Amendment No.2 or latest. Each coil of 100 mts length. To be procured from RDSO approved firms (size 140/0.3mm). Inspection by RDSO.
40
9390
375600
... More
Supply of PVC wire coils of size 28/03 multi strand (flexible). Specn.IRS.S76/89.Amendment No.2 or latest. Each coil of 100 mtr length. To be procured from RDSO approved firms. Inspection by RDSO.
30
1635
49050
... More
Supply o f PVC insulated wire copper conductor 16/02mm to ATC IS:694 to RDSO specification no.IRS.S76/89. Each coil of 100 mtr length. To be procured from RDSO approved firms. Inspection by RDSO.
125
797
99625
... More
Supply of Cable termination rack of size 880mm x 2 Mtr made out of 50mmx50mmx6mm thick MS angle with stainless steel nuts and bolts for fixing of the rack with POWDER COATED and drilling suitable holes to 31 suit hylam sheet and relay frames complete as per standard practice with tripod bases and reel insulators (for K rack, P rack and power rack) and with cable ladder of width 400mm and length of 2 Mtr.. The thickness of angle to be 5mm. Two angles of 40mmX40mmX5mm to be supplied at both ends and supporting flats of 25mm X5mm. Inspection by Consignee.
3
5125
15375
... More
Supply of Relay rack 1-way universal type as per drg.no.S&T/MFT/291 with scaffolding, POWDER 32 COATED with stainless steel nuts and bolts for fixing the racks, supporting angles, frame mounting triangle base with 'J' bolts and insulation of required numbers complete to suit QN1 / K-50 pre wired tag blocks with suitable inner frames. Inspection by Consignee.
6
5111
30666
... More
"Supply of relay contact clip (nickel coated) suitable for QNI relays " Inspection by Consignee.
200
7
1400
... More
Supply of Non-deteriorating type of fuse holders 20Amp capacity for Railway signalling rated voltage 240 AC/DC to Specn. No. IRS S.78/92 (IRS-S-78/97 Tentative) IS:13703 (part 2/sec2):1993 suitable for E1 fuse 20Amps SC-20 Holder Safe Clip / knife edge type size E1 (R-SS) amp. Inspection by RDSO.
375
150
56250
... More
"Supply of Non-deteriorating type of Fuse links1/6/10/16A knife edge capacity for Railway signalling 35 rated voltage 240 AC/DC to Specn. No. IRS S.78/92 (IRS-S-78/97 Tentative) IS:13703 (part 2/sec2):1993 suitable for E1 fuse 20Amps SC-20 Holder Safe Clip / knife edge type size E1 (R-SS) amp. Note: Required rating fuses are to be supplied in consultation with SSE/Sig/SRM/GTL for the required rating. " Inspection by RDSO.
550
21
11550
... More
"Supply of Non-deteriorating type of Fuse links 2A knife edge capacity for Railway signalling rated 36 voltage 240 AC/DC to Specn. No. IRS S.78/92 (IRS-S-78/97 Tentative) IS:13703 (part 2/sec2):1993 suitable for E1 fuse 20Amps SC-20 Holder Safe Clip / knife edge type size E1 (R-SS) amp. Note: Required rating fuses are to be supplied in consultation with SSE/Sig/SRM/GTL for the required rating. " Inspection by RDSO.
300
20
6000
... More
"Supply of WAGO Terminal as per RDSO Specification No. 189/2004 which consists as per 37 following: a) 2 Conductor disconnect type terminal block as per Model No. 280-870 -- Qty: 6 No. b) End plate type 280-374 suitable for disconnect terminal of Model No.280-870 -- Qty: 1 No. c) End stop terminal block type 249- 117 -- Qty: 2 No. d) Shorting links (16A) as per model 280-402." Inspection by Consignee.
300
486
145800
... More
Supply of Markers for the WAGO terminals as per Model No. 249-502 (Plain masker) - 100 No. Inspection by Consignee.
300
43
12900
... More
Supply of Vulco tape of size 45mm width x 1.5 mm thick x 10 Mtr. length. It shall be self bonding type anti corrosive, heat resistant & water proof. Inspection by Consignee. The unit numbers means per ROLL.
15
1524
22860
... More
"Supply of basic material to construct unit maintenance free earth consisting as per RDSO spec no .RDSO/SPN/197/2008 consist of: a) copper bonded steel electrode of 3.0m long, 17.0 mm dia with copper 41 bonding thickness mini 250 micron and UL listed and marked-1 no. b) Earth enhancement compound of RDSO approved brand supplied in sealed bags of min 10 Kgs-03 No. c) Copper strip of 150X25x6mm to terminate earth rod-1 No. d) Copper strip of 300X25x6mm (MEEB)-1 No. e) Copper strip of 150X25x6mm (SEEB)-1 No. (f). Cadmium bronze cable of size 3/16"" (g) Earth electrode and coupler along with earth enhancing compound material (10kg pack) " Inspection by Consignee.
10
16837
168370
... More
"Supply of Tool kit for ESM (31 items) as under: (1)Standard Tool Bag (CANAVAS) - 1 No. (2) Soldering Iron (Make ""Soldern/Philips) - 60W/230V (to be kept at equipment room) - 1 No (3)Multi meter (Digital PHILIPS/FLUKE/18S Rishi B) Upto 20M.ohms 10A, 5KHZ, 2mV to 750V AC, 200V DC -1 No.TRUE RMS METER (4) Screw Driver set of 6 pieces (Taparia Make) - 1 No (5) Cutting plier 6"" (Taparia ) - 1 No. (6) Side Cutter (wire cutter) 6"" (Taparia ) - 1 No. (7) Nose plier 6"" (Taparia) - 1 No. (8) Wire stripper (Taparia ) - 1 No. (9) Fiber tape 42 3 meters - 1 No (10) Scale 6"" (for tongue rail opening) -1 No (S.S.material) (11) Pop spanner wrench 9mm to 22mm (auto adjustable spanner) Taparia make or similar -1 No (12) Pop spanner wrench 10 mm to 30 mm (auto adjustable spanner) Taparia make or similar -1 No (13) Pop spanner wrench 15mm to 41mm (auto adjustable spanner) Taparia make or similar -1 No (14) Hacksaw frame with blade 6"", 4"" width (for cutting cable) - 1 No. (15) Hammer 3.0 lbs 1 No. (16) Chisel 6"" (for cutting bond wire) - 1 No. (17) Poker 8"" (for removing bond wire, bond pin )- 1 No. (18) Screw Driver Heavy duty 12"" with plastic handle (for opening of detector contacts (Taparia ) - 1No. (19) Test piece (Pt wedge piece) - 2 No. (20) Multi colour torch light ( preferable LED rechargeable type) - 1No." Inspection by Consignee.
1
31434
31434
... More
Supply of Rubber Mat of size 2000mm X 500 mm and 12 mm thickness. Inspection by Consignee.
5
819
4095
... More
Supply of Clip On Meter MECO 2700 Model or equivalent with similar features. Approval to be obtained. Inspection by Consignee.
2
4691
9382
... More
Supply of VACO analog Earth tester along with test kit and leather case OR similar. Inspection by Consignee.
1
4016
4016
... More
"Supply of portable true RMS multi meter with AC + DC measurements RISH 18S, IR model with 43/4 digital display automatic terminal blocks system auto power off automatic date hold true RMS should have the following specifications. AC and DC voltage: Up to 1000 volts AC and DC current: Up to 10 Amps Input 46 impedance: 10m ohms (approx.) Resistance: 30m ohm (with lead resistance) Frequency: 100 k Hz capacitance: 10000 micro farad db measurement exit counting stop watch facility. AC+DC measurements high accuracy 1 second response/time off beeper, over load warning/low voltage battery indicator, continuity test facility with sound signal capable of reads with the following spares. Test probe set installed dry batteries - 2 No. A1.5v alkaline batteries installed fuse 5A, 100V rMS copy of for used manual in English, test with neat rubber holster with tilt stand and carrier strap, warranty card, 1 set of extra fuses.". Inspection by Consignee.
1
13570
13570
... More
Supply of analog insulation tester of make Meco, model No MC 941- 500V/1000M Ohms or similar. Inspection by Consignee.
1
3482
3482
... More
Supply of aluminum lugs 25 Sqmm of reputed make. Inspection by Consingee.
100
17
1700
... More
Supply of LED holders with LED's of size 5 mm with 0.5 Watt resistance, to be supplied as per requirement of site in-charge. Inspection by Consignee.
100
12
1200
... More
Fixing o f LEDs along with Jewels, Resistors, Sleeves duly drilling holes and soldering including drawing of wires, bunching and lacing. (All materials to be supplied by the contractor). Inspection by Consignee.
100
12
1200
... More
Supply of Copper eyelets to suit 16/0.2 wire Dowell's make. Inspection by Consignee.
400
2
800
... More
Supply of Copper eyelets to suit 10.sqmm wire Dowell's make. Inspection by Consignee.
400
4
1600
... More
Supply of copper lugs10 Sqmm of reputed make. Inspection by Consignee.
250
8
2000
... More
Supply of Solid State Buzzers with different frequencies in metallic/plastic casing working on 12V- 24V-60 Volts. Inspection by Consignee.
10
204
2040
... More
Supply of 0.5 mm annealed tinned copper conductor PVC inculated and PVC sheathed switch board telephone cable, 10 pair, as per Specn. No. TC 24/91 (To be procured from RDSO approved firms). Inspection by Consignee.
50
31
1550
... More
Supply of 24 volts impulse counter 6 digits. (Keltron or Gujral make). Inspection by Consignee.
10
938
9380
... More
Supply of splice enclosure (24 Fiber) to RDSO spec No RDSO/SPN/ TC/68/ 2006 Rev.o.Amdt 1 or latest. Inspection by Consignee.
4
2417
9668
... More
Supply of HDPE telecom duct with outer diameter of 40mm and inner diameter of 33mm 58 permanently lubricated as per Specn. No. RDSO/SPN/TC/45/2006 Revision 1.0 or latest or as per specification TEC GR No.G/CDS-08/02,NOV 2004 or latest . HDPE pipe shall be supplied along with 4mm dia polypropylene rope of approved quality inside wherever required. The length of HDPE telecom duct should be 1 KM. End plugs to be provided along with drum (free of cost) (2 No. per Km.). Inspection by Consignee.
1
45226
45226
... More
"a) Supply of 15 U rack wall mounted of VERO President make or similar with cooling fan, power 59 manager with 5 sockets,1 equipment tray, earth connecting kit b) Wago terminal one set fitted on DIN rail consist a. part no.280-101 Qty 32 nos ( terminals) b. part no.280-301 Qty 4 nos ( end plate) c. part no. 249-116 Qty: 8 nos ( end stop) d. part no. 210-229/PW/11-000 per mtr. e. marking material 1 to 32 ". Inspection by Consignee.
1
7620
7620
... More
Supply of Four Wire DTMF way station equipment' to RDSO spec. No. TC - 60 / 2007 - Amdt - 1 (or latest) with telephone to RDSO spec. No.TC - 38/39 (or latest). Inspection by Consignee.
4
3833
15332
... More
Supply of Power supply unit 2 Amps as per Specn. No. IRS. TC.72/97 with Amendment 1 or latest with 12 volts / 7 AH MF battery. Inspection by Consignee.
4
2925
11700
... More
Supply of Krone insertion/extraction tool. Inspection by Consignee.
1
1514
1514
... More
Supply of Krone Termination box 20 pair. Inspection by Consignee.
5
1047
5235
... More
Supply of Push button Telephone similar to Beetal Marvel Clip Plus with Caller ID facility as per the specification. Inspection by Consignee.
4
1049
4196
... More
Supply of VF transformer box assembly, wall mounted type for 6 quad cable in RE area along with 65 OFC consisting of 10 Nos of VF transformers, U link sockets, selector switches, wago terminals etc mounted as per drg no B/SG/P/drg/tele/1/2008 (for the equipment) along with tech spec and as per wiring drg B/SG/Misc/50/2008. Inspection by Consignee.
1
19472
19472
... More
Supply of desk type 2 wire , 12 way DTMF selective calling group telephone complete as per specification IRS. TC. 80-2000, Amendment-1. Inspection by Consignee.
2
4257
8514
... More
Supply of filter unit for Block Instrument as per IRS S.68/89. Inspection by Consignee.
2
10350
20700
... More
Supply of Transparent plastic cover superior quality for keeping circuit diagram sheets with provision for hanging size "C". Inspection by Consignee.
1000
40
40000
... More
"Supply of various Registers as required for commissioning. (The required registers to be supplied in consultation with SSE/Sig/SRM/GTL for the mentioned quantity.)" Inspection by Consignee.
50
70
3500
... More
Supply of steel stools 18" height neatly finished and painted. Inspection by Consignee.
2
334
668
... More
Supply of Navtal Locks godrej make 50mm. Inspection by Consignee.
10
384
3840
... More
Supply of key chains with ring with plastic name plate of 60mmx20mmx3mm duly engraving station name on one side and key particulars on one side as specified by the site incharge. Inspection by Consignee.
50
23
1150
... More
Supply of double key lock. Inspection by Consignee.
2
303
606
... More
Supply of modified ground gear connections for TWS electric point machine 220mm throw 1 consisting of Drive rod (Drg No.3460)-1 No., Lock rod (short) (Drg.No.3456-57)-1 No., Lock rod (long) (3466-67)- 1 No., Detector rod (short) (Drg No.3436-37)-1 No., Detector rod (long) (Drg No.S8640/2)- 2Nos., Inspection by Consignee.
49
15120
740889.8
... More
Supply of Nylon insulations for Crompton/High thrust/ TWS point machine, consists plate -2 Nos, 2 stretcher bar bush - 12 Nos, Throw rod bush - 1 No & Flat washer - 2 Nos, Lock rod bush - 2 Nos & Washer - 4 Nos, Detection rods bush - 2 Nos & Flat washer - 4 Nos and MS flat washer (Drg No.S8640) - 16 Nos, MS flat washer (Drg No.S8640/1) - 4 Nos, MS flat washer (Drg No.S8640/2) - 2 Nos. Inspection by Consignee.
58
604
35041.28
... More
Supply of strecher bar insulation consisting of Plate T 10367-1No., Bushes T-10368-2Nos, Washers T-10371-4Nos. Inspection by Consignee.
90
223
20070
... More
Supply of gauge tie plate insulation as per drg no. Plate 10372-1No., Bushes-10368-3Nos, Washers 10371-6Nos. Inspection by Consignee.
90
260
23417.1
... More
Supply of MS bolts and nuts 110mmx20mm. Inspection by Consignee.
220
172
37840
... More
Supply of double wire signalling rope (Galvanized) 6x19as per spec. No. IRS.S11/62 with latest amendments. The Galvanized wires to be used for making ropes with jute core. The tensile breaking strength 140/160 kg/m2 and the nominal diametre of the wire shall be 6mm. Inspection by Consignee.
100
189
18900
... More
Supply of Earth Leakage detector 12 channels as per RDSO spec. No. RDSO/SPN/256/2002 with 7 latest amendment including 1) Mounting stand for ELD and 2 fuse board to isolate from distribution board, for the following requirement of channels : 24V DC - 1 to 4 channels, 110V DC - 5 to 8 channels,110V AC - 9 to 12 channels. Inspection by RDSO. Inspection by RDSO.
4
133187
532748
... More
Supply of 110V AC input, 24V-30V DC output, 1A Transformer - Rectifier as per specification IRS: S91-2014 Ver. 1.0 or latest.
2
19470
38940
... More
Supply of 230V AC input, 24V-30V DC output: 5A Transformer - Rectifier as per specification IRS: S91-2014 Ver. 1.0 or latest.
1
25960
25960
... More
Supply of testing of split core structure, non contact measurement, Real In Time testing, high accuracy, high stability, resistance range 0.01-100, resolution 0.001, accuracy +/- 2% rdg +/- 3dgt, working Temp. & humidity - 20-55, 20% RH 90% RH, Detector Light and Sound Alarm, IP-54 protection, RS485 communication, 10 with extended 4 digit LCD. Display can be mounted up to 2 Mtr. distances from detector unit. (Suitable for Transmission Line/Railway facilities/Communication/Sub Station/ Electrical equipment Grounding. Consists of (Model no-KOBLE 2800 KB ver.3.0 or similar): (a) Main detector unit- 01no., (b) LCD enclosure fitted with Aviation plugs-01 no. (c) Set of detector to LCD enclosure connecting two cables each 2mtr. Length fitted with Aviation connector-01 set (d) Rs- 485 connector with 0.5 mtr. Cable -01 no (e) RMCU with PFC-01 no. Make : SELF (KOBLE)
6
86637
519825.06
... More
Supply of DOT Matrix printer 80 column 24 pin of reputed make like TVS, Wipro etc., Inspection by Consignee.
1
8800
8800
... More
Supply of fibre distribution management system for 24 fibres of OFC. Inspection by Consignee.
1
15400
15400
... More
Supply of covered rack of 19", 42U rack complete with fittings for housing SDH equipments. Inspection by Consignee.
1
18349
18349
... More
Supply & installation of 2KVA capacity online UPS systems with battery of 12V-65 AH capacity-06 16 Nos for battery back up of 120 mins, with isolation transformer, True On-Line double Conversion UPS with PWM- IGBT technology with cold start facility ,suitable for single phase AC input & single phase AC output, Mains On, Inverter On, Overload, Load On Mains, Load On Battery, Battery Low with Sealed Maintenance Free (SMF) Battery with stand and Floor mounted typeMake: APC/Numeric/Emerson. Inspection by Consignee.
1
57907
57907
... More
Supply and installation of 19" - 42 U Rack complete with fittings for housing SDH equipment, FDMS, DDF and other equipment like cable managers, completely wired using krone module and other equipment like runaway ladders etc., as per technical specification below. It should be able to lock all the equipment with only order wire Telephone outside the rack. The rack should be of APW President / Rittal make or similar. The 17 components of the rack are specified below. It includes transportation and installation of rack in prefab/building at specified stations. 1. Rack S33 42U 600'W x 600D - 1 No. 2. Fixed side panels 42U x 600 D - 2 Nos. 3. Front Glass door plain 42U/600W - 1 No. 4. Rear MS Door Plain 42U/600W - 1 No. 5. Castor with brakes-2 Nos. 6 Fans directly mounted on the top 48V DC 90 CFM-2 Nos. 7. Krone mounting bracket - 01 Nos. 8. MCB Mounting panel with MCBs - a. 32 Amps, MCBs(DP) - 2 Nos. & 6Amps MCBs (DP) - 6 Nos. 9. Earth continuity Kit - 01 No. 10. Equipment Trays - 5 Nos. 11. Channel with cable loops 42U - 2 Nos
1
41962
41962
... More
Supply of Rechargeable Battery pack for 5W VHF set GP 328. Inspection by Consignee.
2
1150
2300
... More
"Supply of AC/DC TRMS Leakage Clampmeter, Model: KM 2006 KUSAM MECO; 4 Digit 5000 Counts or similar as per the spec. ". Inspection by Consignee.
2
23047
46095
... More
Supply of SGE double line block instrument of Howrah make as per spec. Inspection by RDSO.
2
105180
210360
... More
Supply of SK30H double rail contact with 5.5m integral cable for MSDAC of ELDYNE make as per RDSO Specn No. RDSO/SPN/ 176/2013 or latest. Inspection by RDSO.
10
197915
1979155
... More
Supply of Track side Electronics unit (EAK-AZLM) for MSDAC of ELDYNE make as per RDSO Specn No. RDSO/SPN/ 176/2013 or latest. Inspection by RDSO.
10
222430
2224300
... More
Supply of Mother Board (AZLM) for MSDAC of ELDYNE make as per RDSO Specn No. RDSO/SPN/ 176/2013 or latest. Inspection by RDSO.
2
48979
97958.88
... More
Supply of Analog card (AzLM) for MSDAC of ELDYNE make as per RDSO Specn No. RDSO/SPN/ 176/2013 or latest. Inspection by RDSO.
2
163666
327332
... More
Supply of PDCU for MSDAC of Eldyne make as per RDSO/SPN/176/2013 or latest. Inspection by RDSO.
10
24856
248567
... More
Supply of Line Verification Box for MSDAC of ELDYNE make as per RDSO Specn No. RDSO/SPN/ 176/2013 or latest. Inspection by RDSO.
2
5051
10103.16
... More
Supply of Reset Box for MSDAC of ELDYNE make as per RDSO Specn No. RDSO/SPN/ 176/2013 or latest. Inspection by RDSO.
2
21091
42182.64
... More
Supply of digital Earth Tester ( 10-100 ohms) with all tools kit and accessories Make : WACO or similar. Inspection by Consignee.
2
5495
10990.52
... More
MROTEK make MAPLE 4C : DAC - E1-E1 interface for Digital Axle counter (SSDAC & HASSDAC) 29 telecom TDM Multiplexer for conversion to E1, MROTEK's Maple 4C rack mountable device consisting of four E1 ports and three slots and one slot populated with 2W/4W E&M supporting up to eight interfaces, balance two slots empty units support both AC/DC power supply and installation including 50 pin cable one number for supporting both 2W/4W E&M, AC etc. Inspection by Consignee.
5
54280
271400
... More
Supply of CYGNUS 835, V.21 to E1 converter as per latest spec. Inspection by Consignee.
4
55000
220000
... More
Supply of Minium Single Loop Analog addressable Fire Alarm system with loop capacity of connecting minimum 30 detector and/or modules maximum 50 devices. The panel shall have a built in power supply and battery charger as per RDSO Spec.No.RDSO/SPN/217/2018 Ver.2.0 or latest. Inspection by RDSO.
1
204682
204682.8
... More
Supply of Multi Sensor detector Dual Optical/Thermal with rotatries and back boxes including base as per RDSO Spec.No. RDSO/SPN/ 217/2018 Ver.2.0 or latest. Inspection by RDSO.
12
9800
117600
... More
Supply of Addressable Double action indoor manual call point with back box (RED) including with key as per RDSO Spec.No. RDSO/SPN/ 217/2018 Ver.2.0 or latest. Inspection by RDSO.
1
5800
5800
... More
Supply of Sounder cum strobe having range of 81 dB as per RDSO Spec.No. RDSO/SPN/217/2018 Ver.2.0. or latest. Inspection by RDSO.
2
6900
13800
... More
Supply of Monitor module/In put modules as per RDSO Spec.No. RDSO/SPN/217/2018 Ver.2.0. or latest. Inspection by RDSO.
2
5800
11600
... More
Supply of Control module/Out put module as per RDSO Spec No. RDSO/SPN/217/2018 Ver.2.0. or latest. Inspection by RDSO.
2
5800
11600
... More
Supply of Analog LHS Cable RDSO Spec.No. RDSO/SPN/217/2018 Ver.2.0 or latest. Inspection by RDSO.
80
1475
118000
... More
Supply of Analog Controller/LHS cable along with interface module to connect LHS controller with Panel. RDSO Spec.No.RDSO/spn/ 217/2018 Ver.2.0 or latest. Inspection by RDSO.
1
102223
102223.4
... More
"Supply of 2 core 1.5 sq.mm FRLS Copper unarmored Fire Survival Circuit Integrity cable (inside) with necessary clamps and fittings Spec.No.RDSO/SPN/217/2018 Ver.2.0. or latest". Inspection by RDSO.
150
194
29205
... More
Supply of 2 core 1.5 sq.mm FRLS Coper armored cables with necessary clampings and fittings, RDSO Spec.No.RDSO/SPN/ 217/2018 Ver.2.0. or latest. Inspection by RDSO.
50
140
7000
... More
Supply of Isolator Module. Inspection by RDSO.
2
6683
13367.04
... More
Supply of Fibre boards of 'Alter the points immediately on arrival of the train as per GR:3.38 (2)' in bilingual i.e., in Hindi and English of size 4.5" X 12". Inspection by Consignee.
1
650
650
... More
Supply of Common Remote Alarm Unit to install in ASM's Room (One per station). Inspection by Consignee.
1
3000
3000
... More
Supply of Tag block 200 way to RDSO Spec. No. IRS.S.77/2006 (Rev.1) of Drg. No.SA.24751.
2
1000
2000
... More
Supply of polymeric positive temperature coefficient device (self resetting type) DC 60V of 1.1Amp capacity linked with red wire with crimping pin type lugs suitable for 16/02 copper wire leads of make Little fuse/Tyco/Fuztec or equivalent. Inspection by Consignee.
100
17
1700
... More
Supply o f Visitors Chair similar o f godrej PCH 5d13R model STARR or similar. Inspection by Consignee.
2
3801
7602
... More
Supply of Revolving chair of godrej mid back PCH5002T model or similar. Inspection by Consignee.
2
7360
14720
... More
Supply of steel Almarah similar of godrej Stonewell plain with 4 adjustable shelves with dimensions 916X486X 1981mm or similar. Inspection by Consignee.
2
18305
36610
... More
Supply of Designing and UV Printing of station working order/Track bonding diagrams MRM stations of size 4ft x 3ft in molded aluminum channel with elegant and stainless steel star brackets for hanging arrangement. Printing in UV print and designing in corel draw package. Inspection by Consignee.
25
855
21375
... More
Supply of RCC precast duct of size 425 mm x 500 mm to 1000 mm of outer wall thick ness of 50 50 mm with Mo partitions and inside wall thick ness of 40 mm with steel bars 8 mm/6 mm reinforcement.The cement mortor ratio shall be 1 (Cement):1.5 (river sand): 3 (12 mm baby ballast/chips). The RCC duct shall be cured for 14 days. Inspection by Rites.
1750
2170
3797500
... More
Supply of RCC precast duct cover of size 37.5 mm thickness x 325 mm (W) x 1000 mm (L) with steel bar mat 100 mm interval 8 mm (W) x 6 mm (L). The cement mortor ration shall be 1 (Cement):15 (river sand): 3 (12 mm baby ballast/chips). The RCC duct cover shall be cured for 14 days. Inspection by Rites.
1750
450
787500
... More
Supply of duct to duct connecting flat of size 40 mm (W) x 1000 mm (L) x 6 mm (Thickness) with one side venical slot another side horizontal slot. Inspection by Rites.
3250
93
302250
... More
Supply of carnage bolts of suitable size and length for fixing the duct to duct connecting hat. Inspection by Consignee.
6250
13
84375
... More
Supply ol Wing nuts to suit Carriage bolts to be used for fixing the duct to duct connecting flat. Inspection by Consignee.
6250
17
106250
... More
Supply of plain washers to suit carriage bolts to be used for fixing the duct to duct connecting flat. Inspection by Consignee.
12150
4
48600
... More
Foundation, erection , wiring, painting testing and commissioning of Colour light signal 2/3/4 1 aspects including dependent shunt signal as per drawings of Drg.no.SC//N/CN / 62 /A. Implantation distance writing. For foundation 1 cement: 3 sand : 6 aggregate shall be used .Size of metal aggregate not more than 40mm and river sand to be used. Work to be done as per prescribed drawings above. (All the material ,cement ,sand aggregate paint including nuts, bolts, washers required are to be arranged by the contractor.)
12
3783
45396
... More
Foundation, erection , wiring, painting testing and commissioning of Colour light signal 2/3/4 2 aspects as per drawings of Drg.no.SC//N/CN / 62 / A. Implantation distance writing. For foundation 1 cement: 3 sand : 6 aggregate shall be used. Size of metal aggregate not more than 40mm and river sand to be used. (All the material ,cement ,sand aggregate paint including nuts, bolts, washers required are to be arranged by the contractor.)
28
3547
99316
... More
Foundation, erection , wiring, painting testing and commissioning of Position light shunt signal ground type. Includes nuts and bolts. Implantation distance writing. Work to be done as per prescribed drawing no.SC//N/CN / 62 /B. Size of metal aggregate not more than 40mm and river sand to be used.
18
875
15750
... More
Erection, wiring, painting, testing and commissioning of Junction type/direction type/stencil type/multi lamp type route indicators 1/2/3/4 /5/6 way
7
299
2093
... More
Erection, wiring, painting, testing and commissioning of Calling on Signal.
10
236
2360
... More
Erection, wiring, painting, testing and commissioning of Post type shunt signal.
4
236
944
... More
Fabrication, Supply and fixing of CALLING ON instruction boards, STOP boards with engineering 7 grade reflective sticker of size 600X900X1200 mm GI sheet, with MS angle of 75X75X6 mm with 6 me-ter length including paint, excavation of pit and concrete foundation etc., as per the instructions of sight in-charge. All necessary materials to be arranged by the contractor).
5
3549
17745
... More
Releasing of colour light signal 1/2/3/4 way complete.
32
532
17024
... More
Releasing of shunt signals ground type complete.
6
141
846
... More
Releasing of Warning Boards/stop boards/BSLB/Calling on boards/other legend boards
4
252
1008
... More
Manufacturing, Supply, painting and fixing of markers of G/P/C/A/IB Markers/Number plates with engineering grade reflective sticker on MS sheet with clamps as per drawings/as per site incharge. including all fixing materials.
70
308
21560
... More
Supply & laying of DWC split pipe of 120/103 mm dia, 2meter long in already dug cable trenches has per Drawing No.SK.9/11 .The unit of RMT means two split pipes of 1 Mtr each.
1800
232
417600
... More
Foundations, erection, fixing of 'E' type locks, painting the box and painting of termination & other 13 particulars of Full GKP type boxes . Metal Size of the aggregate should not be more than 40mm. Work to be done as per prescribed drawing no.SK/CN/1/89-A & B- All the material is to be arranged by the contractor except E- type lock ( E-type lock will be supplied by Rlys)
40
2460
98400
... More
Installation and wiring of all power supply equipment viz DC Distribution system, chargers, 14 Transformers, batteries etc, and its wiring as per the tech specn (lacing, button/ thread copper eyelets/lugs required for crimping 10 sq.mm wire are to be supplied by contractor. For power panel, bolts, nuts and fixing screws are to be arranged by contractor. ON/OFF Switches, digital meters, hylam sheet and wire coils will be arranged by railways. Per
3
12227
36681
... More
Excavation of earth and providing earth pipe of size 50mm dia, 3.5mm thick 2.0 m. long G.I. pipe with masonry tub constructed around at earth locations as specified by site Engineer. Alternate layers of 30kgs- 16 char coal and 30kgs-common salt to be filled in the pit while closing. The pipe perforation etc., to be carried out as per drawing No. G/SG/09/2002. The earth pipe to be connected to the function with cable as supplied by Railways. The reading should be painted on the masonry tub. The masonry tub of 300X300X300mm should be covered with cement slab. (All materials to be supplied by the contractor except cable.)
130
1406
182780
... More
Fabrication and supply of GI termination box for point machine of size 45cm x 23cm x 12 cm, the termination box to be fabricated out of GI sheet 10SWG
31
2579
79949
... More
Fixing of point machines on PSC/Wooden sleepers as per standard drawing. Wiring as per circuitry includes fixing & wiring of point contactor unit frames and controlling relays including fixing of crank handle ward plate.
15
4308
64620
... More
Providing crank handle box, wiring, testing as per technical specification including concealed wiring in the wall. Inspection by Consignee.
9
3848
34632
... More
Supply of Crank handle configuration.
5
82
410
... More
Manufacturing and fixing of glass fronted box (key box) made out of teak wood of size 10 inches x 16 inches. Inspection by Consignee.
9
255
2295
... More
Releasing of electrical point equipment complete
12
213
2556
... More
Initial Charging of 2V-80AH secondary cells as per the prescribed procedure for 3 cycles charging / discharging as instructed by SSE/Sig/SRM/GTL.
170
220
37400
... More
Supply o f approved quality o f paint manufactured by Asian/British/ Johnson & Nicholson and 24 accepted by DSTE/ASTE and painting Full size Location Box inside and outside in two coats duly scrapping the rust as directed by SSE/SE at site. The colours to be used as per standard practice and as instructed at site by SSE/SE. One coat of paint to be done before erection of equipment and second coat of painting to be done during non-interlocking period before commissioning of the installation.
70
335
23450
... More
Supply o f approved quality o f paint manufactured by Asian/British/ Johnson & Nicholson and 25 accepted by DSTE/ASTE and painting Half size Location Box inside and outside in two coats duly scrapping the rust as directed by SSE/SE at site. The colours to be used as per standard practice and as instructed at site by SSE/SE. One coat of paint to be done before erection of equipment and second coat of painting to be done during non-interlocking period before commissioning of the installation.
30
243
7290
... More
Strengthening of foundations of signals, Full/Half location boxes, by carrying out the earth work around the foundation, ramming of the earth, caring out masonry work from bottom of earth work using country stones and cement masonry to prevent the earth from slipping down the bank.
90
2813
253170
... More
Numbering location box as per standard practice and writing all termination particulars inside the location box as per details. This includes all main and tail cable particulars, writing of cable numbering of cables, polishing teak wood boards in two coats and painting hard wood shelves in two coats of black enamel.
140
280
39200
... More
Supply and fixing of teak wood reapers suitable for Full location Box with 50 mm width x 20mm thick and length of 940mm after applying two coats of wood primer. The unit numbers means per REAPER.
300
130
39000
... More
Supply and fixing of teak wood reapers suitable for Half Box 50mm width x 20mm thick and length of 470mm after applying two coats of wood primer. The unit numbers means per REAPER.
120
85
10200
... More
Supply and fixing of teak wood reapers suitable for Full Box 75mm width x 20mm thick and length of 940mm after applying two coats of wood primer. the unit Numbers means per REAPER.
170
159
27030
... More
Supply and fixing of teak wood reapers suitable for half Box 75mm width x 20mm thick and length of 470mm after applying two coats of wood primer. The unit numbers means per REAPER.
50
97
4850
... More
Supply and fixing of 20mm thick teak wood planks for Keeping Equipment in the Full Box after applying two coats of wood primer. The approximate size of the flank is 940mmx20mmx300mm. The unit numbers means per PLANK.
30
490
14700
... More
Releasing of location boxes Full/Half size
70
148
10360
... More
Test lamp arrangement in LBs/RE cuttings (Auto mobile handle type). The unit numbers means per Location.
30
119
3570
... More
Earthing and soldering of the cable armours in location boxes. The unit numbers means per CABLE.
650
21
13650
... More
Fixing relay bases, wiring in location boxes, bunching, fixing of relays as per circuit diagram. This includes fixing of condensers, resistance, 6 way / 1 way terminals/ WAGO, ND type fuses, LED indicators for fuses as per type fuses, LED indicators for fuses. The unit numbers means per RELAY.
280
156
43680
... More
Installation, wiring, testing and commissioning of IPS system. Wires/cables shall be supplied by 37 Rlys. Charging of battery is covered elsewhere. Minor items like casing/capping where required to be supplied by contractor. Grouting and masonry work of the IPS to be done. earthing of IPS included as per site requirement earthing to be done covered separately. work includes installation of charged batteries and their wiring with IPS.
1
14033
14033
... More
Excavation of trench to a depth of 1200mm and width of 300mm at bottom in all types of soil38 (Normal soil/soft soil/sandy soil) except in hard morum / rocky soils /bridges/ level crossings/ track crossings/ coil pits) as per RDSO Sketch No. SDO/CABLE LAYING /003 including marking of cable alignment, clearing of jungle, bushes, trial pits if required, refilling with excavated soil, ramming and consolidation after laying of cables complete to the finished item of work as directed by supervisor in-charge.
15
51912
778680
... More
Excavation of trench to a depth of 1200mm and width of 300mm at bottom in hard morum soil as 39 per RDSO Sketch No. SDO/CABLE LAYING /003 including marking of cable alignment, clearing of jungle, bushes, trial pits if required, refilling with excavated soil, ramming and consolidation after laying of cables complete to the finished item of work as directed by supervisor in-charge.
4
67092
268368
... More
Digging of cable trench to a depth of not less than 30 Cms in rocky terrain, Concreting the trench with 150mm thick concrete with 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size. All the material is to be arranged by contractor.
1000
128
128000
... More
Trenching under Rails for crossing the track (Track crossing) and refilling of trenches as per RDSO drawing No.SDO/CABLE LAYING/009. The track crossing shall be done at right angles.The depth of cable trench 41 shall be 1.2 Mtr below the rail flange. The depth between top cable and the level of rail flange of the rail shall never be less than 1.0 Mtr. The ballast shall be stored separately while making the trench and the earth soil shall be stored separately. While re-filling the trench, the earth soil has to be filled first to the ground level and the ballast has to be properly put in the track. This work has to be done under supervision of supervisor of S&T and supervisor of P.Way
500
141
70500
... More
Breaking of metal/ tar road and refilling after laying the cables as per drawing no.SDO/CABLE LAYING/010. The surface of the road shall be concreted to match with the old surface
250
142
35500
... More
Track crossing by horizontal boring method based on the drawing No.DRM/J/6735 dated 7-8-03 43 (enclosed) and as advised by the engineer at site. This includes the supply and insertion(pushing) of GI pipe (80mm) confirming to IS.1239 heavy class in the bore drilled with the coupler between two pipes. All the joints of casing pipes should be tight and leak proof.
500
1403
701500
... More
Laying different type cables in the trench.
179000
5
895000
... More
Straight through / derivation with/without transformer joints: Installation Thermo shrinkable jointing kits for straight through / derivation joints for LC gate, pump houses etc where VF transformers are not required 45 and derivatin joint by using 2T trasformer ( to be housed in the joint) . This includes tapping of nominated Quad at a specific location shown by the Railway Engineer at site to the jelly field cable already laid. All material including valco tapes except thermo shrinkable jointing kit shall be supplied by the contractor. The unit numbers means per JOINT.
20
979
19580
... More
Excavation of square coil pit up to a depth of 1 Mtr. X 1.5 Mtr. For providing coil at location box, point, signals etc., This includes back filling and ramming of trench / pit after laying the cable and consolidation of soil.
20
181
3620
... More
Cable termination including fixing terminals, fuses, LDs etc,. Meggering the cables and recording the readings.
25400
7
177800
... More
Supply & Laying of G.I Pipes 100mm dia. medium quality to specification IS.1239 (part-I) 1990 and 48 galvanised to specification IS.4736-1986 On bridges , culverts, trench with channel ramps on either end of the culvert/bridges. Clamping arrangement with MS brackets for fixing of GI pipes on bridges/culverts, small holes of 5mm are to be drilled on the pipe before laying of the pipes.
250
341
85250
... More
Supply & laying of RCC Pipes 150mm outer dia, 2 Mtr long, thickness 25mm.
150
226
33900
... More
Installation, testing and commissioning of Data Logger which includes the software configuration 50 needed, validation, taking test print, for networking for transferring the data to nominated location for monitoring and changing of EPROMS (if any) as per the instructions of the site in-charge, including alterations data base in Hq/SSE offices where ever required.
1
24280
24280
... More
Preparation of Contact Analysis for 'Q' style relays as per detailed technical specification.
500
14
7000
... More
Fixing relay bases on the relay frames erected in Relay Room, Wiring of all types of relays by drawing various sizes of wires/multicore cable, fixing fuses, condensers, resistances, LEDs etc and wiring duly soldering the same as per approved circuit diagram, testing point to point before soldering and after soldering, bunching and lacing as per detailed technical specification.Different colour codes and sizes of wire to be used as per standard practice. This also includes, provision of all PVC sleeves required to be provided. Copper lugs to suit 52 to 16/02 wire and neat bunching, lacing with Modi Nylon / Twine thread and using PVC dotted tape with buttons were required. This also includes soldering all the wires in the relay room with Rosine core of IS Spec. 1921 @40<37@ Tin and 40% Led). Soldering should be done as per standard practice. This also includes inserting the clips, point to point testing as per the circuit diagram and plugging relays to Relay bases (except Inter-cables, relays other materials such as Rosine core, flux, nylon thread. PVC dotted tape should be supplied by the contractor). Point to point testing should be done in the presence of Engineer-in-charge as instructed in two stages, one before soldering and the other after soldering.
450
174
78300
... More
Erection of Relay rack 1way/2way/4way with scaffolding suitably concreting tri-pod bases using J- bolts, fixing rack supporting of size 50x50x6 mm on to the wall. Reel insulators are to be provided for insulating the rack from the scaffolding & tri-pod bases. the unit numbers means Per 1 Way.
13
341
4433
... More
Fabrication, supply and fixing aluminium ladder of size 25mm X 25mm X 5mm, 200mm width, arrangements for drawing various wires in the battery, equipment and relay rooms.
50
472
23600
... More
Transportation of materials from any Stores to Site and vice-versa including loading and unloading (Lead above 50Km). The unit numbers means PTPK.
90000
4
432000
... More
Supply and Installation of OFC joint enclosure and splicing of Optic fiber cable (24 fibres) and 56 testing as per technical specification No. GR OJC-2/02 Sept 2003. Supply of Splice Enclosure (24 fiber) shall be of TVS make Part No.1500-L18X-XX as per Board specification of TEC and Schedule of supply enclosed. All materials including Fusion splicing machine used for fiber splicing and, OTDR for testing and other testing materials if any shall be arranged by the contractor
4
6416
25664
... More
Testing of fibres by splicing all 24 fibres
1
15818
15818
... More
Blowing of armoured optic fiber cable (OFC Cable supplied by Railways) into the duct supplied by 58 using blowing machine and associated works. Before blowing the duct integrity shall be tested. If any defect is found during duct integrity test, the entire length of HDPE duct from one chamber to another chamber is to be replaced by the contractor at free of cost.
3
7382
22146
... More
Laying of HDPE duct 40/33 mm dia in the trenches and in protective works already provided.
1
4956
4956
... More
Excavation of Jointing pit and provision of joint chamber of 1.2mtr dia. of 60 cm height with 2-piece 60 cover on top and bottom cover with holes for drainage (reinforcement drawing will be as per technical specification).This includes water cooling of chamber, backfilling and ramming of the trench after cable laying and consolidation of soil as well as disposal of soil as per plan as advised by site engineer.
5
3745
18725
... More
Casting of foundation with 1:2:4, 20mm metal and river sand to be used, supply & erection of lattice type tripod towers of GI 15 meters of height as per spec enclosed. Provision of earth electrode near the tower and 61 connect the same to tower which is to be erected above the station building/at the site shown by the site Engineer of the Railways.. Cement shall be supplied by Rlys. work includes installation of the antenna, drawing the cable and installation of the battery and 25W set and commissioning the system. 25W set, cable, antenna, battery will be supplied by Rlys.
1
28594
28594
... More
Installation and commissioning of 4 Wire way station control equipment as detailed below : a) The 62 way station equipment & Power supply unit are to be mounted on a rack as per Drg.No. CORE/S&T/ALD /SK/436/95. b) The internal wiring should be wired between VF Repeater/ VF Transformer bay and MS Angle rack then to be extended to Dy.SS/ASM Table as per drawing (All the wiring materials are to be provided by the contractor).
4
2651
10604
... More
Fixing of PVC pipes & bends, drawing of required wires through the same up to functions like control telephone, Dy.control telephone, magneto phones inside SM's office as per circuit diagram. This includes supply and fixing of required DPDT and rotary switches, PVC pipes and bends 25mm dia with 2mm wall thickness, 63 Lightening dischargers and painting of particulars.
1
3628
3628
... More
Testing and commissioning of the system: This work involves the testing of underground 6 quad 64 cable in each repeater section after laying and jointing. These readings to be recorded and supplied to Railway Engineer. This involves all the tests to be carried out such as measurement of loop resistance, insulation test, frequency attenuation, cross talk and noise level etc.
2
2271
4542
... More
Installation /fixing and wiring of 15U rack, drawing of cable through aluminium ladder, neatly lacing 65 the cables, fixing of earth bus bars, extending earth to various equipment through 16 sq.mm copper cable, fixing of power distribution panel with 5 AC sockets. Aluminium ladder and lacing thread shall be supplied by the contractor.
1
562
562
... More
Supply and installation of 45mmx 45mm PVC channels for drawing switchboard cables at OFC cable huts and at stations as indicated by Railway Engineer at site.
100
66
6600
... More
Supply and fixing of different sizes of PVC casing /Pipes as required by Railway at site by fixing /clamping to the wall for indoor wiring purposes. The material required carrying out the wiring such as soldering, lacing, casing, fixing clamps; screws etc are to be provided by contractor on his own cost.
100
32
3200
... More
Installation of 100/50/20 pair Krone terminal Box on hard wood plank of size 8"x13"x1" plank and wiring. Hard wood plank and other materials like screws, bolts etc., are to be supplied by the contractor at his own cost.
6
114
684
... More
Testing of fibres between short haul station in both direction after splicing the required fibres
1
5273
5273
... More
Fixing of 12 pair weather proof C.T. Box WAGO type and termination of 6 quad jelly filled cable on teak wood plank of size 375mm x 250 mm x 20mm thickness
10
217
2170
... More
Supply and installation of rack mounted 24F FMS fiber part no.fms-1u 24FS 24FP Raychem make including 24Nos 0.2db FC/PC adaptors and 24numbers 900 micron 1.5 meter FCPC pigtails. RDSO Spec No.: RDSO/ SPN/TC-037-2000 (Ver.3) or latest.
2
16285
32570
... More
Supply and installation of rack mounted 12F FMS fiber part no.fms-1u 12FS 12FP Raychem make including 12Nos 0.2db FC /PC adaptors and 12 numbers 900 micron 1.5 meter FCPC pigtails. RDSO Spec No.: RDSO/SPN/TC-037-2000 (Ver.3) or latest.
2
9266
18532
... More
Releasing of block counter complete.
2
306
612
... More
Releasing of block instrument complete.
2
307
614
... More
Releasing of complete equipments and materials in battery, equipment rooms, relay rooms and SM's office.
1
2577
2577
... More
Installation and wiring of token/token-less block Instrument in ASM's room with suitable foundation including fixing of LD's, terminals, fuses &earth connections. All ancillary works included. The unit numbers means per INSTRUMENT.
2
2789
5578
... More
Design of cable route plan, cable core chart, location box particulars, panel particulars, fuse particulars, track bonding diagram, numbered wiring diagrams, relay index, contact analysis, posting of contacts in wiring diagram to be supplied by Rlys, surveillance panel particulars, data logger particulars, K rack, rack details, 77 resistor, condenser particulars, power equipment wiring, power equipment foot print diagram, etc as per requirement. Supply of 6 sets of final hard copy of the approved circuit diagrams and the documents mentioned above along with contact analysis in A2, A3, and A4 sizes as required with 1 set of prints on tracing film and a soft copy on compact disc (CD) to be supplied. (Arranging rexin cloth bound booklets and binding for large and small sizes of drawings).
5
83295
416475
... More
Arranging of sufficient staff by contractor and giving test to the railway incharge as per instructions to carry out simulation. Making a simulation test board plywood 3mm approximately size 1.5x1meter. Painted 78 according to the yard layout fixing 1 way /2 way switches in its approximate position for track circuit , point setting lamp holders and lamps. Carrying out testing using simulation board after energising of internal circuit. Commissioning of indoor and outdoor equipment as laid down in technical specification. The unit numbers means per ROAD.
25
2686
67150
... More
Non-Interlocking arrangements
5
12300
61500
... More
"Installation of single earth(maintenance free) including the following:- welding and fixing of copper tape (used as bus bar) welding of cadmium bronze cable to copper plate using material supplied vide item no. 1,2 of SPD of Sch-A . All the material supplied for mounting of copper tape, exothermic weld materials, tools and fixtures for welding copper tapes shall be arranged by contractor. a. Digging /Auguring/Boring of single earth pit of 100mm to 125 mm dia to the depth of approx. 2.8 meter. b. Insertion of 3.0 meter electrode and penetrating it at least .2 meter by pushing gently with sledge hammer where the natural soil is assumed. c. Filling of earth pit with earth enhancement compound (EEC) in slurry from and backfilling. d. Carrying out exothermic weld connection on 80 single earth electrode to a copper tape of 150X25X6mm. e. Carrying out exothermic weld connection on the copper tape of 150X25X6mm on earth electrode for connecting two 35 Sq mm cables for redundancy.. f. The exothermic welding material for bonding the earth system shall be procured from RDSO approved firms, which includes graphite moulds, clamps, weld metal powders. g. Digging a trench to a depth of at least 0 .5 Mtr. and run the two 35 Sq mm earth conductor ( procured against supply item) from earth pit to MEEB. h. Routing and termination of two 35 sq mm earth conductors in trench from earth pit to 300X25X6mm MEEB, which is to be fixed inside the equipment room with two insulation studs i. 300X300X300 mm (inside dimension) concrete earth pit with a concrete lid, approx 50mm thick with pulling hooks, shall be provided to cover the pit. Back side of the cover will be painted in black and dare of the testing and average resistance value shall be written." Route Kilo
10
4276
42760
... More
Fixing of approximately 200 Nos of 6 way/ 1 way terminal block horizontally on 6mm Hylam sheets on pre-erected relay racks which in turn to be fixed to rack with all supports as per instructions of SSE incharge. Materials such as bolts, nuts and supporting flats to be supplied by the contractor only.
5
479
2395
... More
Cutting and fixing of Hylam sheet of 6 mm/3mm thickness to suit to 1 way relay rack and fixing on pre-erected relay racks with screws, bolts and nuts and fixing strips, condensers and resistances of various values - 50 No. (All materials to be arranged by the contractor himself)
5
103
515
... More
Fixing of non-deteriorating fuse holders with LED indications and resistors and negative terminal strips on 6mm Hylam sheet on pre-erected relay racks with screws, bolts and nuts. (All materials to be arranged by the contractor himself)
500
5
2500
... More
Arranging of sufficient staff by contractor and giving test to the railway incharge for testing of wires drawn point to point using buzzer (Before and after soldering) as per instructions. The unit numbers means per SHEET.
130
316
41080
... More
Execution (Supply , transportation,installation and commissioning) of pin brazing /exothermic out 86 weld connection for TLJB/boot leg as per RDSO Spec. No.IRS S-103/2004 or latest. This includes good quality insulated cable for TLJB for the above purpose.one end on rails web in track circuit area and terminating the other end of wire on the terminals in the TLJBs (all the equipments and materials required for welding will be arranged by the contractor. the unit numbers means per BOND.
50
365
18250
... More
Wiring of Track circuits feed end, relay end complete with TLDs, batter-ies, chargers, track relays, 87 double lead wires, providing insulation etc,. connected with track commissioning of track circuit including provision of bracket for TLD covers and painting. Anti-tilting arrangement has to be done for track relays, chargers & batteries.
20
1004
20080
... More
Supply and Installation of Surge Protection Device of class 'D' type for 12 V DC supply between power equipment and signaling system complete with MS enclosure & connection wires/cables as per technical specification (model no SDL-HFF-16 or similar) as per specification RDSO/SPN/TC/98/2011 or latest.
80
5236
418880
... More
"Installation, Commissioning and Testing of split core structure. "
6
14600
87600.12
... More
Exacavation of pit, casting concrete foundation & erection of apparatus case full size as per Drg. No. SK/CN/1/89/A/1 and fixing of 1 No. of E type lock for the front door, fixing of one hylam sheet of 3 1000mmx940mmx10mm thickness and painting the apparatus case inside and outside with one coat of redoxide and two coats of aluminium paints (foundation bolts and nuts, 'E' type lock, cement, river sand, stone jelly of size 20/20mm, hylam sheet of size 1000mmx940mmx10mm, paints, varnish, fixing bolts & nuts and all other miscellaneous material required for the work shall be supplied by the contractor).
70
9875
691250
... More
Excavation of pit, casting concrete foundation and erection of apparatus case half size as per Drg. No. SK/CN/1/89/B/1, fixing of one 'E' type lock for the front door and latching arrangements for the back door and 4 fixing of one hard wood shelf plank 37mm thick and painting the appratus case inside and outside with one coat of redoxide and two coats of aluminium paints (foundation bolts and nuts, 'E' type lock, cement, river sand, stone jelly of size 20/20mm, hard wood plank of 37mm thick, paints, varnish, fixing bolts & nuts and all other miscellaneous material required for the work shall be supplied by the contractor).
30
6967
209010
... More
Connecting the cables to existing location box by breaking the location box foundation to the extent 5 of 15cm wide at the place with out causing any damage to locations box /installation etc. to make way to lay cable and connect the same in the location box. After this the broken part of foundation should be made to original position with cement concrete.
110
320
35200
... More
Supply, painting and fixing of cable gland plate for Full GKP Box as per site requirement (required bolts and nuts for fixing the gland plates are to be arranged by the contractor).
140
533
74620
... More
Supply & installation of active lightening arrestor of class-A for building protection of erico-3000 make or similar with the approval of engineer in charge which shall work on ming principle along with counter as per technical specification. Installation to be done by OEM.
1
315000
315000
... More
Transportaion of RCC pre-cast duct & cover from casting place to the execution place for placement (One RCC duct with one RCC Cover - 1 No)
1750
150
262500
... More
Prepartion of placement of RCC pre-cast, excavation /fiIIing as required (Excavation of trench of required depth and width for placing thr RCC duct with cover and to fixinq the duct to duct arrangement.
1750
100
175000
... More
Laying of duct including clamping on both sides with nuts, bolts & washers to connect the duct block as per drawing and close duct with RCC cover after laying the cable.
1750
60
105000
... More
Cement concrete 1:3:6 over the cover size with 62.5 mm thick and 325 mm width of entire length of duct.
42.2
5034
212434.8
... More
Laying of DWC/REX pipe in already excavated trench
3600
25
90000
... More
Supply, Installation & commissioning o f 4 W Leased line external/internal modem answering/ originating
1
10500
10500
... More
Termination of OFC in fibre distribution management system
1
10000
10000
... More
Provision of all telecom arrangements in SM's room
1
3211
3211
... More
Erection and fixing of 19" 42U racks in OFC room
1
823
823
... More
Installation, Testing and Commissioning of HASSDAC with dual detection.
8
55150
441200
... More
Releasing of existing Axle Counter field equipment
8
702
5616
... More
Outdoor installation, testing and commissioning of MSDAC (Multi Section Digital Axle Counter) system. The unit numbers means per DP.
10
15000
150000
... More
Formation of Ring earth with 4 conventional earths:- Provision of Ring earth by connecing conventional earths with copper caternary wire as required at site as per instructions of site incharge. Excavation of earth and providing earth pipe of heating gravity of size 50mm dia, 3.5mm thick 2.0 m. long G.I. pipe of heavy quality along with masonry tub constructed around at earth locations as specified by locations as specified by site Engineer. Alternate layers of Charcoal and common salt to be filled in the pit while closing. The pipe perforation 20 etc., to be carried out as per drawing No. G/SG/09/2002. The masonry tub of 400X400X450mm shall be covered with river sand after completion of the earthing. Conventional earths to be wrapped with caternary wire before excavated in earth along with use of proper clamps and nuts. All earths to be connected with each other by use of copper caternary wire or suitable cable provided by railways. Mimimum two number of earth pipes to be connected inside location/function with suitable cable ( cable will be supplied by railways). Excavation of trench of 0.5mtr minimum depth for inter conncetion of 4 conventional eraths by caternary wire, Catenary wire shouild be welded through Arc welding to the GI pipe with copper clamps. The earth reading, D.O.I & D.O.M should be painted on the masonry tub. (All the Men and material to be supplied by the contractor except Caternary wire)
8
16770
134160
... More
Installation charges for Cygnus 835 (v.21 to E1 converter)
4
7500
30000
... More
Fabrication, supply and internal installation of NI panel of size 12"x24"x12" made in 18 gauge MS sheet as per the spec.
5
8333
41665
... More
Installation, testing and commissioning charges of fire alarm system including programming of devices, fire alarm panel and LHS
1
58500
58500
... More
Supply and fixing of Fire extinguisher of CO2 type (5Kg capacity)
4
8840
35360
... More
Installation, wiring, testing & commissioning of fuse Alarm system for monitoring health of various 25 types of fuses with automatic change over facility along with audio and visual indications at various signalling installations. It consist of fixing of module of fuse alarm system on existing relay racks, wiring from existing fuses to modules, soldering, lacing etc.
1
400
400
... More
Supply, Installation, testing of door contacts and validation of proximity switch data through dataloggers. Including embedded software development in dataloggers, This includes supply of proximity switches along with 2 way rigid connector (for termination between proximity switches and datalogger tag blocks)
1
5196
5196.73
... More
Supply & Application of Cypruss Silate Siloxine Alithativ Urethane Resin Blend Solvent based high 27 technology membrane radiant heat reflecting insulating thermal barrier coating industrial white colour with a genuine product sticker when remove display "VOID" on each container / drum containing 20Ltr approx. each as per RDSO guidelines
80
4864
389120
... More
Supply and fixing of Netlon wire mesh of all windows and ventilators as per instructions of Engineer in-charge including labour charges.
100
291
29100
... More
Transporting and supply and installation of Concrete (RCC) route indicators at intervals of 50 meters as per technical specification. They should be of standard RCC with letters "one side "SCR" and the other side "S&T Cables". In case of telecom quad cable joint locations, it shall be painted with red colour.
225
807
181575
... More
Releasing of existing apparatus cases (Full/ Half/ Quarter size) without damage after releasing the 31 shelf planks, Terminal blocks, Fuse Blocks, Terminal Boards, Relays of all types EKTs, Secondary Cells, power equipments, 'E' type locks, etc., and breaking the concrete foundation. After releasing, the resultant pits are to be closed and consolidated by ramming and levelling. The released materials shall be accounted and stacked at a place as instructed by Railway representative at site.
60
2275
136500
... More
Dismantling and releasing of existing Colour light Signals complete (up to 4 aspects) with or without 33 Route Indicators, calling on signals, shunt signals etc., carefully without any damage to the gadgets, accounting and stacking them neatly at a place as instructed by Railway representative at site. The work includes breaking the concrete foundation, closing the resultant pit and resurfacing it by ramming and levelling.
32
2333
74656
... More
Releasing of existing ground type shunt signals along with surface base, signal post etc carefully 34 without any damage, accounting and stacking them neatly at a place as instructed by Railway representative at site. The work also includes breaking and removal of concrete foundation and refilling of the resultant pit by ramming and levelling.
6
1662
9972
... More
"Alteration in Electronic Interlocking system (Hitachi/Ansaldo make) at Pathakothacheruvu (PLU) station - Supply of Microlok-II interlocking materials, redesign of EI system with related application logic & interfacing circuits to suite approved Signalling Plan & approved Route Control Chart (RCC) / Table of Control (TOC) / Selection Table provided by Railways of PLU station in connection with provision of longer loop line work, 1 Testing & commissioning support including Factory Acceptance Test (FAT) & Site Acceptance Test (SAT), installation of new program as per approved signalling plan, new Relay racks erection, removal of few wires- connectors- terminals, installation of new wires- connectors- terminals & supply of as made indoor EI diagrams (Interface circuits, Logic circuits, detailing book) in CD as soft copy & with five (5) sets as hard copy in regular "A3" size including issuance of OEM Certification. Any hardware required for above work and having RDSO specification to be inspected by RDSO.
1
5310000
5310000
... More
"Alteration in Electronic Interlocking system (Hitachi/Ansaldo make) at Nadalur (NRE) station - Supply of Microlok-II interlocking materials, redesign of EI system with related application logic & interfacing circuits to suite approved Signalling Plan & approved Route Control Chart (RCC) / Table of Control (TOC) / Selection Table provided by Railways of NRE station in connection with provision of longer loop line work, Testing 2 & commissioning support including Factory Acceptance Test (FAT) & Site Acceptance Test (SAT), installation of new program as per approved signalling plan, new Relay racks erection, removal of few wires- connectors- terminals, installation of new wires- connectors- terminals & supply of as made indoor EI diagrams (Interface circuits, Logic circuits, detailing book) in CD as soft copy & with five (5) sets as hard copy in regular "A3" size including issuance of OEM Certification. Any hardware required for above work and having RDSO specification to be inspected by RDSO.
1
6313000
6313000
... More
"Alteration in Electronic Interlocking system (Hitachi/Ansaldo make) at Kalamalla (KMH) station - Supply of Microlok-II interlocking materials, redesign of EI system with related application logic & interfacing circuits to suite approved Signalling Plan & approved Route Control Chart (RCC) / Table of Control (TOC) / Selection Table provided by Railways of KMH station in connection with provision of longer loop line work, Testing 3 & commissioning support including Factory Acceptance Test (FAT) & Site Acceptance Test (SAT), installation of new program as per approved signalling plan, new Relay racks erection, removal of few wires- connectors- terminals, installation of new wires- connectors- terminals & supply of as made indoor EI diagrams (Interface circuits, Logic circuits, detailing book) in CD as soft copy & with five (5) sets as hard copy in regular "A3" size including issuance of OEM Certification. Any hardware required for above work and having RDSO specification to be inspected by RDSO.
1
5310000
5310000
... More
"Modification to the existingElectronic Interlocking system (MEDHA make) at Chegunta (CGTA) station as per RDSO spec No. RDSO/SPN/192/2019 in connection with longer loop line work - Supply of additional hardware of Input WFM CPU card, Output WFM CPU card, WFM Relay Driver card, redesign of EI system with 4 related application logic & interfacing circuits, VDU, MT software and upgradation of datalogger database, Testing & commissioning support including Factory Acceptance Test (FAT) & Site Acceptance Test (SAT) & supply of as made indoor EI diagrams (Interface circuits, Logic circuits, detailing book) in CD as soft copy & with five (5) sets as hard copy in regular "A3" size including issuance of OEM Certification. Any hardware required for above work and having RDSO specification to be inspected by RDSO.
1
4977091
4977091
... More
"Bantanahalu (BLL) station: Supply of Electronic Interlocking (Hot Standby) for stations with Signaling functions up to 125 units as per Function table enclosed along with 15% spares, tools, manuals and Instruments. E.I to be provided as per RDSO Spec.No.RDSO/SPN/192/2005 or latest . Note: Description of various modules, sub assembly and other accessories required as detailed in explanatory note for the above work with unit rate to be furnished by EI manufacturer/contractor as annexure. " Inspection by RDSO.
1
7832317
7832317
... More
Incremental rate for signaling functions in EI SYSTEM over and above 125 functions under item No 1 (Inspection by RDSO). Note : Per Unit to be read as Per Function)
80
71250
5700000
... More
Supply of commercial grade operator VDU of size 55" Full HD, HDMI/DVI Connectivity, Inbuilt Speaker etc (For this item Prior approval of Engineer In charge required in written).
4
226320
905280
... More
Supply of fan less embedded industrial grade computers ( Similar to Moxa V2406 or better ) with all accessories such as key board, mouse, antivirus etc. of industrial grade s per approved specification as recommended by RDSO (TAN No. STS/TAN/3007 Version 1.0 or latest)
4
257250
1029000
... More
Installation, Wiring, testing, Soldering of all EI Equipment's, earthing of EI Equipment, Relay Racks and Power Equipment etc. including supply power cable and Drawings/Documents/Manuals etc. Note : Per Unit to be read as Per EI
1
633807
633807
... More
Design and drawing for complete indoor signalling work for new EI. Note : Per Unit to be read as Per EI
1
243671
243671
... More
Commissioning of Electronic Interlocking system.
1
24619
24619
... More
Training of Railway Personnel in installation, commissioning, testing, trouble shooting and in diagnosing faults using diagnostic tools/flow charts including supply of necessary documents (60 Man days)
1
50000
50000
... More
Training on application software for designing, change in the logics and converting it suitable for system and loading the programme into the working system for alteration of SIP/TOC. The training should be comprehensive with complete document (90 Man days)
1
75000
75000
... More
ELECTRONIC INTERLOCKING : Supply, fabrication, installation and fixing of panel operator 5 console with arrangement to fix upto 55" VDU's - 2Nos. Reset boxes, and other S&T gadgets. This shall be made of not less than 18mm thick Plywood/Novopan or better materials with storage facility of approved colours with contractors' materials, lead, lift and manpower as per the instructions of engineer in charge and as per the enclosed drawing.
1
244641
244641
... More
EI Earthing arrangements for EI (central building) including End Goompties for Object controllers (if 5 any) as per RDSO Specification as required for EI system as per Rly board Lr.No.2010/Sig/SGF/EI (Ansoldo) dated 22.06.2011 and RDSO TAN No. STS/E/TAN/3006 dated shall be followed. All materials shall be supplied by contractor. MF earthing materials shall be inspected by RITES and shall be procured through RDSO recommended firms. Note : Per Unit to be read as Per location
1
200000
200000
... More
Installation of Embeded Industrial Grade Fan-less VDU of both operating Dual VDU and Maintainer VDU with all accessories.
1
50000
50000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements