Roads And Buildings Department Tender

Km 00 to 10 0 of Dharmavaram krishnapuram road;Forming earthen shoulders with selective soils obtained from side earth having MDD of not less than 1.75 gms/cc by mechnical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with vibratory road roller @ OMC to meet requirement of table 300-2 of MORT&H including all hire and operational charges of T&P , complete for finished item of work as per MORT&H specification 305 (5th revision) (Payment will be made based on levels for finished item of work)

Km 00 to 10 0 of Dharmavaram krishnapuram road;Forming shoulders with borrowed useful seclected earth having MDD of not less than 1.75 gms/cc from outside road boundary by mechnical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with vibratory road roller @ OMC to meet requirement of table 300-2 of MORT&H including all hire and operational charges of T&P , complete for finished item of work as per MORT&H specification 305 (5th revision) (Payment will be made based on levels for finished item of work)

Km 00 to 10 0 of Dharmavaram krishnapuram road;Supplying of hot applied thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35, the material should be of BERGER Company/ BERGER Equivalent/ Equivalent brand and must comply with the following: a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade D) Adhesion : Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997

Km 00 to 10 0 of Dharmavaram krishnapuram road;Supplying & Fixing of Molded Shanks Raised Pavement Markers made of plastic body moulded from HIPS(HI-impact polysterene) or ABS or ASA(Acrylic strene Acrylonitrite) and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 ? DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 700 Kgs. Fixing will be by drilling holes on the road for the twin shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer?s recommendation and complete as directed by the engineer.

Km 00 to 10 0 of Dharmavaram krishnapuram road;Providing and fixing Cautionary/Warning sign boards of size900 mm equilateral triangle made out of Type -X1 of ASTMD 4956-09 wide angle cube cornered micro prismatic Retro reflective sheeting and confirming to IRC 67;2012 for full background of White color and letters/logos done by screen printing in black color, boarders by screen printing in Red color and fixed over 4mm aluminium composite material sheet having minimum 0.5 mm thick aluminium skin on both sides with back side painted grey color and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on MS angle post of size 75x75x6 mm with clear height of not less than 2.1 m from ground level to the bottom of the board.The signost should be ainted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white color with banks of 30 cm height .The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M 15 Concrete foundation of size 450x450x600 mm including cost and conveyance of all materials , equipment , machenery and labor with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.

Km 00 to 10 0 of Dharmavaram krishnapuram road;Providing and fixing Village name board of size1200x450 mm made out of Type -I V of ASTMD 4956-09 wide angle cube cornered micro prismatic Retro reflective sheeting and confirming to IRC 67;2012 for full backgroundr green color and white letters and fixed over 3mm aluminium skin on both sides with back side painted grey color and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on MS angle post of size 75x75x6 mm with clear height of not less than 2.1 m from ground level to the bottom of the board.The signost should be ainted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white color with banks of 30 cm height .The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M 15 Concrete foundation of size 450x450x600 mm including cost and conveyance of all materials , equipment , machenery and labor with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.

Km 00 to 10 0 of Dharmavaram krishnapuram road;Providing and fixing Mandatory / Regulatory sign boards size 900 mm equilateral circular made out of Type ? IV of ASTMD D4956-09 High Intensity Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 3MM Alluminium Composite Material ( ACM ) sheet having minimum 0.30 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading changes necessary for satisfactory completion of the work as directed by Engineer -in-Charge.

Km 00 to 10 0 of Dharmavaram krishnapuram road;Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed ISMC series channel vertical post 150x75x5 mm spaced 2 m centre-to -centre ,1.8 m high , 1.1m below ground /road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS: 1367 and IS:1364 metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm, 330mm long complete as per clause 810