Roads And Buildings Department Tender

Providing BT patch work to the specified thickness as directed by the department using 9.5 mm to 11.2 mm size IRC gauge HBG M/C key chips using 72 kgs of 80/100 grade bitumen for 1 cum of chips and .15 cum of stone dust cutting the existing pot holes to rectangular shape with vertical sides or as directed by the department, removal loose aggregate, brushing cleaning and dusting the existing road surface, heating and spraying bitumen for tack coat as directed by the department, pre-mixing bitumen and metal, spreading the premix in flush with the riding surface, hand packing sectioning to proper camber, tamping with heavy rammers, laying bitumen to the top surface as directed by the department etc. complete including cost and conveyance of metal, Bitumen and all labour charges, hire and operational charges of boiler and other small T&P cost of firewood, kerosine and other incidental charges etc., complete for B.T.patch work.

Providing and applying tack coat with bitumen VG-10 (Bulk) using Bitumen pressure distributor at the rate of 0.25 kgs per sqm on the prepared Granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.

Providing , laying of close graded premix surfacing material ( Mixed seal surfacing) of 20 mm thickness by hot mix plant using hard blasted granite crushed aggregates of 13.2 mm to 0.09 mm (Type 'B') as per table 500-19 of specification 508 of MoRT&H (5th Revision), premixed with bituminous binder VG-30 (60/70) grade @ 19.00 Kg per 10 Sqm area, including cost of all materials and transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled roller 8 to 10 Tonnes as per MoRT&H (5th Revision) Specification No. 508 complete for finished item of work in all respects as directed by Engineer-in-charge.