Roads And Buildings Department Tender

Providing Vibrated Cement Concrete (1:3:6) using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500, 1700, 2200 (5th Revision) and as directed by the Engineer-in-Charge for Body walls.

Providing, laying Reinforced cement concrete Hume pipes of 1000 mm Dia., NP-4 class for pipe culverts including cost and conveyance of Pipes etc., complete and Labour charges for laying, jointing of 1000 mm dia. R.C.C Hume pipes in position including lifting, aligning, lowering and hoisting etc., as per drawing and as per MoRT&H Specification 2900, 2905 and 2906 (5th Revision) and IRC Special Publication No: 13 and as directed by the Engineer-in-Charge for finished item of work.

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification (5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces for culvert parapet walls

Providing BT patch work to the specified thickness as directed by the department using 9.5 mm to 11.2 mm size IRC gauge HBG M/C key chips using 72 kgs of 80/100 grade bitumen for 1 cum of chips and .15 cum of stone dust cutting the existing pot holes to rectangular shape with vertical sides or as directed by the department, removal loose aggregate, brushing cleaning and dusting the existing road surface, heating and spraying bitumen for tack coat as directed by the department, pre-mixing bitumen and metal, spreading the premix in flush with the riding surface, hand packing sectioning to proper camber, tamping with heavy rammers, laying bitumen to the top surface as directed by the department etc. complete including cost and conveyance of metal, Bitumen and all labour charges, hire and operational charges of boiler and other small T&P cost of firewood, kerosine and other incidental charges etc., complete for B.T.patch work.

Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per drawing BD/1-69( A) but excluding cost of steel and its fabrication charges as per MoRT&H specification 1500, 1600,1700, & 2702 (5th Revision) and as directed by the Engineer-in-Charge for wearing coat over Deck slab.