Roads And Buildings Department Tender

Flooring plastering 20mm thick average in CM (1:4) with sponze finishing.cost of all materials, including conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth curing, but excluding seigniorage charges etc,, complete for finished item of work

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work,

Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification.

Supplying and fixing of Door shutter with shutter frame and Infill panel made from PVC material conforming to IS: 10151:1982. The shutter frame is made out of PVC extruded sections having overall dimensions of 100mm X 30mm, with two self extruded grooves at 40mm & 50mm on front surface. The Infill panel is made out of multi chambered seamless hollow PVC extruded panel having overall dimensions of 610 mm X 20 mm. The shutter frame shall be meter cut and joined at corners by means of plastic brackets. Stickers showing locations of different hardware will be pasted on the shutter including all labour charges etc., complete for finished item of work.

Towards labour charges for cleaning septic tank with septy clean and removing of soil from the tank and disposing out side in open area as directed by the Dept. and cleaning with water and providing ventilation pipe etc. complete.

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.

Cost Suply and Fixing of best Salwood SS Fly proof mesh for Door shutter different sizes frame with fly froof mesh of frame size 3" x 1 1/2" thick and beading 3/4" x 1/2" thick including cost, wrought and putup and conveyance of all materials work site and including all taxes, all laber charges for making, fixing of door furniture in position as directed by Dept| Officers including M.S.P.C. hings, tower bolts, M.S. aldop and M.S handle, and all labour charges such as diricted by the Departmental Officers for finished item of work.

Cost Suply and Fixing of Best Country wood (Salwood) Fully glazed Window with three Panneled glazed Shutters the frame of witch are made of well seasoned best country wood 21/2"x3" free from all diffects such as werping, bending, knot etc., and fixed with 4 nos 'Z' hold fasts of size 300x40mm size and with 2 Nos Mild steel screws of 35x5mm size with 11/2 thick best country wood styles and rise using Pin headed Glass 4 mm thick with welded M.S. Grills (execluding cost of M.S. Grills) as per specifications of APDSS including cost, wrought and putup and conveyance of all materials work site and including all taxes, all laber charges for making, fixing of Panneled Window furniture in position as directed by Dept| Officers including Top Tower bolts Alluminium 150mm long, Bottom Tower bolts 150mm long, Aluminium Butt hinges (IS:205)- 100 mm Long, Window stoppers Aluminium, and all labour charges such as diricted by the Departmental Officers for finished item of work.

Providing mild steel pipes of different diameters including cost and conveyance of all materials, cutting and bending to required sizes and shapes placing in position and welding as per approved designs and drawings to the supplies at the time of execution of work including cost and conveyance of materials, welding rods and all all wastages such as overlaps,couplings,welded joints etc., and all operational, incidental labour charges such as cutting bending placing in position, welding etc., complete for finished item of work for AC Sheet Roof

Roofing with UV resistant multi-wall polycarbonate sheets for roofing of any colour - 6 mm thick, fixing with G.I ‘J’ bolts & nuts 8 mm dia G.I plain washers complete for finished item of work, but excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials – upto 600 pitch.

Supply and fixing of Cement Bonded Particle Board (IS 14276) cup board frames and shutters and using 16mm Cement Bonded Particle Board duly painted both sides with one coat of primer and two coats of synthetic / enamel paint of approved shade and brand including fixing of hardware like M.S. powder coated Piano hinges of size 18mm x 18mm, brass ball catches,Aluminum tower bolts and handles , Godrej locks, Fevicol, screws and nails including cost and conveyance of all materials, labor charges, all incidental and operational charges etc., complete for finished item of work at site as per the directions of Engineer in Charge.

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock fixing in position including cost and conveyance of all materials, Sales tax & Other taxes on materials to site, Operational and Incidental charges including all labour charges for fixing at site etc; complete for finished itemof work.

Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet fixing in position including cost and conveyance of all materials, Sales tax & Other taxes on materials to site, Operational and Incidental charges including all labour charges for fixing at site etc; complete for finished itemof work.

S & F angle stop cock 12.7 mm dia first quality Indian Make heavy duty Seiko/ Senior/ Nice or equivalent fixing in position including cost and conveyance of all materials, Sales tax & Other taxes on materials to site, Operational and Incidental charges including all labour charges for fixing at site etc; complete for finished itemof work.

Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated for wash basins and Flush tanks fixing in position including cost and conveyance of all materials, Sales tax & Other taxes on materials to site, Operational and Incidental charges including all labour charges for fixing at site etc; complete for finished itemof work.

S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent fixing in position including cost and conveyance of all materials, Sales tax & Other taxes on materials to site, Operational and Incidental charges including all labour charges for fixing at site etc; complete for finished itemof work.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) Supply and fixing 22.20 mm OD Ashirvad Flowguard CPVC Pipes

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) Supply and fixing 28.60 mm OD Ashirvad Flowguard CPVC Pipes

Providing 3 M Single Socket PVC/ SWR pipe - 4 Kg/sq.cm - Prince/ Sudhakar/ Kisan/ Supreme or any ISI Brand including cost of necessary Door Bend 87.5 Degree , Plain Bend 87.5 DegreeShoes, Single Tee with Door, Pipe Clip - UPVC/SWR Pipe fittings, Iron Clamps and all other accessories and fixing in position including cost and conveyance of all materials, Sales tax & Other taxes on materials to site, Operational and Incidental charges including all labour charges for fixing at site etc; complete for finished itemof work. 110 mm dia 3M Single socket PVC / SWR

Providing 3 M Single Socket PVC/ SWR pipe - 4 Kg/sq.cm - Prince/ Sudhakar/ Kisan/ Supreme or any ISI Brand including cost of necessary Door Bend 87.5 Degree , Plain Bend 87.5 DegreeShoes, Single Tee with Door, Pipe Clip - UPVC/SWR Pipe fittings, Iron Clamps and all other accessories and fixing in position including cost and conveyance of all materials, Sales tax & Other taxes on materials to site, Operational and Incidental charges including all labour charges for fixing at site etc; complete for finished itemof work.75 mm dia 3M Single socket PVC / SWR

Supplying, Placing & Providing on Terrace (at all floor levels) of Sintex /Aqua tech or equivalent Polyethylene water storage tank double layer confirming to ISI 12701 mark with lid & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks etc., complete as directed by the Departmental Officers for finished item of work.

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size fixing in position including cost and conveyance of all materials, Sales tax & Other taxes on materials to site, Operational and Incidental charges including all labour charges for fixing at site etc; complete for finished itemof work.

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size fixing in position including cost and conveyance of all materials, Sales tax & Other taxes on materials to site, Operational and Incidental charges including all labour charges for fixing at site etc; complete for finished itemof work.