Roads And Buildings Department Tender

To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.

Roads And Buildings Department Tender

Cuddapah, Andhra Pradesh

Opening Date19 Jul 2021

Closing Date2 Aug 2021

Tender Amount₹ 8,56,19,848

Notes

Download

Costs

EMD
Refer Documents
Document Cost
Refer Documents
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
426482
Bid Award Id
View
Tender No
NIT NO 05/JNTU/Startup/SE kdp/DSE/AEE II/2020 21 Dt.01.07.2021
Tender Authority
Roads And Buildings Department View
Purchaser Address
-
Website
http://tender.apeprocurement.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Download All

BOQ-1263.7 kBStart up Centre_BO...Start up Centre_BOQ_13.07.2021.corrected.xls

Document-11.7 MBDTS startup JNTU C...DTS startup JNTU Corrected.doc

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310) Ground Floor

Quantity4178

Rate-

Amount 1057034

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Conveyance of un-useful excavated earth to a distance of 5 KM for disposal including hire charges of T & P, labour charges etc., and overheads & contractors profit complete for finished item of work.

Quantity3714

Rate-

Amount 129990

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Pre construction Anti termite treatment is a process in which chemical toxic to subterrean tremites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums, plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding, overheads and contractor profit etc. complete for furnished item of work as per the approval of the Engineer-in-charge Ground Floor

Quantity1527

Rate-

Amount 259590

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing plinth protection using plain Cement Concrete general purpose tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shade for a width of 1200mm set over base coat of cement mortar (1:6), 12 mm thick using screened sand over M 5 mix bed 100mm thick along with drain constructed with 225 mm thick walls using fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. and plastering 2mm thick two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) for brick masonry drain, laying of tiles in between basement of the building and brick wall and as directed by the Engineer - in - charge including cost and conveyance of all materials to site, all labour charges like mixing of cement concrete, laying, curing, overheads & contractor profit etc., complete for finished item of work. Ground Floor

Quantity332

Rate-

Amount 1109876

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard trap metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Footings

Quantity701

Rate-

Amount 6543134

Quantity97

Rate-

Amount 1144503

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns Upto FGL

Quantity64

Rate-

Amount 782464

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns Ground Floor

Quantity79

Rate-

Amount 965854

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns First Floor

Quantity77

Rate-

Amount 994147

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns Second Floor

Quantity5

Rate-

Amount 67975

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintlels Ground Floor

Quantity14

Rate-

Amount 171822

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintlels First Floor

Quantity14

Rate-

Amount 180166

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintlels Second Floor

Quantity1

Rate-

Amount 13464

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 175 mm Rcc Side Wall Second Floor

Quantity34

Rate-

Amount 95030

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) Roof beams Ground Floor

Quantity92

Rate-

Amount 1000132

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) Roof beams First Floor

Quantity86

Rate-

Amount 974982

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) Roof beams Second Floor

Quantity5

Rate-

Amount 59020

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) 125mm thick Slabs Ground Floor

Quantity555

Rate-

Amount 729825

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) 125mm thick Slabs First Floor

Quantity473

Rate-

Amount 648483

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) 125mm thick Slabs Second Floor

Quantity22

Rate-

Amount 31416

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) 150mm thick Slab Ground Floor

Quantity141

Rate-

Amount 206142

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) 150mm thick Slabs First Floor

Quantity141

Rate-

Amount 214884

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) 150mm thick Slabs Second Floor

Quantity51

Rate-

Amount 80886

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) 175 mm thick Slabs Ground Floor

Quantity879

Rate-

Amount 1431012

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) 175 mm thick Slabs First Floor

Quantity879

Rate-

Amount 1490784

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) No. 402) 200 mm thick Slabs Second Floor

Quantity22

Rate-

Amount 42284

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) Sun shades Ground Floor

Quantity98

Rate-

Amount 79184

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site,centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) Sun shades First Floor

Quantity98

Rate-

Amount 83006

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Plain Cement Concrete M 20 nominal mix using 20mm size graded machine crushed hard trap metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges centering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for steps for finished item of work. (APSS No. 402) Ground Floor

Quantity2

Rate-

Amount 11064

Quantity2

Rate-

Amount 11346

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126) Ground Floor

Quantity132

Rate-

Amount 10169016

Quantity55

Rate-

Amount 4310955

Quantity20

Rate-

Amount 1594480

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of diGFerent diameters including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126) Ground Floor

Quantity0.6

Rate-

Amount 44791.2

Quantity0.5

Rate-

Amount 37997.5

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of MS doors, grill to windows / in open court yards using MS angles, flat, square bars including cost and conveyance of all materials, cutting, bending, welding, all operational charges, labour charges, overheads and contractor profit etc., complete for finished item of work.

Quantity3328

Rate-

Amount 332800

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:8) prop (Cement:sand) using solid fly-ash blocks of size 225 x 100 x 60 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:8 (290x225x140) Ground Floor

Quantity296

Rate-

Amount 2185072

Quantity298

Rate-

Amount 2313672

Quantity76

Rate-

Amount 619172

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 225 x 100 x 60 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (225 x 100 x 60) Ground Floor

Quantity277

Rate-

Amount 247638

Quantity274

Rate-

Amount 264958

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size graded aggregate machine crushed hard trap metal (coarse aggregate) from approved quarry from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete, curing etc., complete for finished item of work. (APSS No. 402) for:-Hand Mix-PCC (1:3:6) NOMINAL MIX for bed blocks & hold fasts Ground Floor

Quantity5.8

Rate-

Amount 30786.4

Quantity5.7

Rate-

Amount 31407

Quantity0.2

Rate-

Amount 1142.4

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. for Internal wall (SS 901,903 & 904) Ground Floor

Quantity2092

Rate-

Amount 928848

Quantity2122

Rate-

Amount 1035536

Quantity88

Rate-

Amount 46816

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Ornamental plastering to ceiling 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Ground Floor

Quantity1260

Rate-

Amount 580860

Quantity1258

Rate-

Amount 640322

Quantity91

Rate-

Amount 50778

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Plastering 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 20 mm For External wall (BLD-CSTN-9-) Ground Floor

Quantity1223

Rate-

Amount 562580

Quantity1338

Rate-

Amount 674352

Quantity895

Rate-

Amount 490460

Quantity140

Rate-

Amount 76720

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work for basement. (SS 901,903 & 904)

Quantity125

Rate-

Amount 42500

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) GF

Quantity1219

Rate-

Amount 1503027

Quantity1107

Rate-

Amount 1412532

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work.(APSS No.701 &707) Ground Floor

Quantity85

Rate-

Amount 10370

Quantity110.25

Rate-

Amount 14001.75

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing 16 mm to 18 mm thick high polished leather finish granite stone slabs (steel grey or pearl black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, full rounding the edges of treads , providing 3 grooves of size 2mm x 1mm for the full length of treads , polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special) Ground Floor

Quantity42

Rate-

Amount 168672

Quantity14

Rate-

Amount 57344

Quantity15

Rate-

Amount 59700

Quantity8

Rate-

Amount 32640

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Flooring with 16 mm to 18 mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special) Ground Floor

Quantity99

Rate-

Amount 366300

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Flooring with 16 mm to 18 mm thick high polished granite stone slabs black colour as approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge , polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work for platforms (S.S.701 & special) First Floor

Quantity91

Rate-

Amount 298207

Quantity91

Rate-

Amount 305396

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and placing Reinforced Cement Concrete M 20 nominal mix using 12mm size hard trap machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, laying concrete, vibrating,lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403) for sill slabs Ground Floor

Quantity42

Rate-

Amount 200928

Quantity42

Rate-

Amount 204918

Quantity80

Rate-

Amount 42640

Quantity80

Rate-

Amount 44240

Quantity159

Rate-

Amount 65190

Quantity159

Rate-

Amount 68052

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing cladding to walls with High Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work. Ground Floor

Quantity102

Rate-

Amount 454206

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) Ground Floor

Quantity108

Rate-

Amount 100008

Quantity101

Rate-

Amount 97970

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work. Ground Floor

Quantity384

Rate-

Amount 244224

Quantity353

Rate-

Amount 228391

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Flooring with chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300mm x 300 mm and thickness 25 mm of any shades as approved by Engineer - In - Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item of work.

Quantity59

Rate-

Amount 47259

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing admixture confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 100ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).Second Floor

Quantity1492

Rate-

Amount 710192

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump bottom slab,in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 12mm thick mixed with integral cement water proofing admixture confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 100ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). Ground Floor

Quantity108

Rate-

Amount 48816

Quantity101

Rate-

Amount 49490

Quantity54

Rate-

Amount 28566

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and laying cinder concrete in cement cinder mix (1:5) prop using 12.5mm nominal size cinder laid in layers and compacted as directed for filling sunken roofs incluidng cost and conveyance of all materials like cement, sand, brick bats etc., to site incluidng cost of all labour charges for laying concrete, ramming, curing, overheads & contractors profit etc., complete for finished item of work. (APSS. No. 402) First Floor

Quantity31

Rate-

Amount 82739

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs, sand with 180 and 320 No., emery paper for the surface preaparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc, complete for finished item of work for internal walls for:- Internal colouring - Providing Putty to Internal walls. Ceiling portion

Quantity2609

Rate-

Amount 511364

Quantity3565

Rate-

Amount 698740

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and applying synthetic plaster putty or equivalent putty or texture paint or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texture paint filler by putty knife / muslin pad, air dry for 2-3 hrs, for the surface preaparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc, complete for finished item of work for external walls - including cost of access scaffolding for:- External colouring - Providing Putty/ Texture to External walls [BLD-CSTN-12-17-14] External walls

Quantity1330

Rate-

Amount 514710

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade 1 making 3 coats in all to give an even shade after brushing the surface to remove all dirt and remains of loose powdered materilas, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 912 for external walls for:- External Colouring - acrylic emulsion paint - 3 coats. All floor

Quantity3631

Rate-

Amount 856916

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207). All floors

Quantity263

Rate-

Amount 45236

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work Cellar All floors

Quantity449

Rate-

Amount 499737

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 1 No for each step fixed with base plate of 25mm dia using bonding agent and anchor fastner and welding, drilling of 25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly , lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work. All Floor

Quantity92

Rate-

Amount 52716

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of stainless steel (grade 304) railing for ramp as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class fixed in to wall with 25mm dia pipe of 0.30m length @ 1m centre to centre and welding, buffing, polishing all members of the railing thouroughly , lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work. All Floors

Quantity163

Rate-

Amount 93399

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ?D? quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72 mm and the glass holding section made of 304 grade stainless steel of 0.58 mm thick galvanised steel section as stiffeners inside the colour coated steel powder coated sections as per the design requirement & calculations to suit wind pressures as given in IS: 875, the primer coat with epoxy primer of 5 ? 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick and the vertical section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56 mm x 0.72 mm for frame horizontal section, stiffener section of 47 mm x 97 mm x 1 mm, cover profiles sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37 mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue reflective glass, brackets made of CRCA powder coated/Electroplated to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement and gasket made of Ethyl Propylene Diamine Monomer, U.V. resistant silicon sealant including fixing in concrete/masonry wall with self-expanding cap & screws inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and fixing charges complete for finished item of work.All floors

Quantity69

Rate-

Amount 519363

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of two shutter main door cum fixed window as per approved drawing with best teak wood frame of section 150mm x 100 mm with fixed fan light of 500mm at top and fixed panels of 600mm width at sides fixed with 12mm thick Tinted - Bronze/Green glass using 12mm x 12mm teak wood beading and fixing ornamental grill made of 25mm x 5mm MS flats as per the approved drawing in fan light portion and fixed panels and 1st class teak wood top and middle rails & styles of section 120mm x 35mm, bottom rail of size 150mm x 35mm and 12mm thick plain float glass for shutter with ornamental etching including cost and conveyance to site of teak wood frame, shutters, glass including supply and fixing 6 Nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 6 Nos butt hinges(IS:205) 150mm long , 1 No. aldrop (IS:2681) 450mm long, 3 Nos tower bolts- 10mm (IS:204) of 200 mm long , 2 Nos 450 mm long fancy handles, 2 Nos door stoppers, 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutters to the frame, fixing glass in fan light portion etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 40 mm) (4000mm x 2600mm).Ground floor

Quantity11

Rate-

Amount 94413

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including with fixed fan light of 500mm height at top , pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for double shutter door of size 1.20m x 2.1m including Flush door shutters of 35mm thick solid bond wood block board type with commercial ply on both faces conforming to IS:2202 including cost of fixtures of 4 Nos. MS-Powder coated Tower Bolt-10 mm (IS:204) 250 mm Long, 4 No's. MS-Powder coated Door Handles(IS:208) 150 mm long, 2 No's. MS-Powder coated Aldrop (IS:2681) 300 mm long, 2 No's. MS-Powder coated Door Stoppers and 2 Nos. Rubber/Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including all Labour charges for wrought and put up, fixing in position frames of any size, shutters for doors, fixing glass, including cost & conveyance of all materials, and all operational & incidental charges etc., complete, as per drawing and Technical Specifications for finished item of work or as directed by the Engineer-in-Charge. as per APSS 1001 & 1002 for Door D (1.5 x 2.6m).All floors

Quantity94

Rate-

Amount 336896

Quantity7

Rate-

Amount 25753

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for Single shutter door of size 1.00m x 2.1m including Flush door shutters of 30 mmthick solid bond wood block board type with commercial ply on both faces conforming to IS:2202 including cost of fixtures of 2 Nos. MS-Powder coated Tower Bolt-10 mm (IS:204) 250 mm Long, 2 No's. MS-Powder coated Door Handles(IS:208) 150 mm long, 2 No's. MS-Powder coated Aldrop (IS:2681) 300 mm long, 1 No's. MS-Powder coated Door Stoppers and 1 Nos. Rubber/Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including all Labour charges for wrought and put up, fixing in position frames of any size, shutters for doors, fixing glass, including cost & conveyance of all materials, and all operational & incidental charges etc., complete, as per drawing and Technical Specifications for finished item of work or as directed by the Engineer-in-Charge. as per APSS 1001 & 1002 for Door D1 (1.05 x 2.1m)

Quantity20

Rate-

Amount 73720

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for Single shutter door of size 1.00m x 2.1m including Flush door shutters of 30 mmthick solid bond wood block board type with commercial ply on both faces conforming to IS:2202 including cost and fixed fan light of 500mm height with 5mm thick fixtures of 2 Nos. MS-Powder coated Tower Bolt-10 mm (IS:204) 250 mm Long, 2 No's. MS-Powder coated Door Handles(IS:208) 150 mm long, 2 No's. MS-Powder coated Aldrop (IS:2681) 300 mm long, 1 No's. MS-Powder coated Door Stoppers and 1 Nos. Rubber/Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including all Labour charges for wrought and put up, fixing in position frames of any size, shutters for doors, fixing glass, including cost & conveyance of all materials, and all operational & incidental charges etc., complete, as per drawing and Technical Specifications for finished item of work or as directed by the Engineer-in-Charge. as per APSS 1001 & 1002 for Door D1 (1.2 x 2.6m) without fan

Quantity13

Rate-

Amount 47827

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing single side prelam solid panel PVC door frame (Choukhat): Providing and fixing factory made Pac single side Prelam door frame of the size 50x7 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2 Nos. of 150mm long brackets of 15 x 15mm MS Square tube. The two vertical door profiles are to be reinforced with 19 x 19mm MS. square tube of 19 guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4 Nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-incharge including conveyance of all materials, labour charges for fixing, overheads & contractors profit complete for finished item of work for door of size (800mm x 2100mm) ALL FLOOR

Quantity205

Rate-

Amount 76875

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and fixing 30mm thick factory made moulded door shutter- wood free consisting of frame made out of MS. tubes 19 gauge thickness and size of 25mmX25mm for styles, top and bottom rails. MS. Frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick high density EPS conforming to IS 4671-1984 bounded with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different plain and / or pre-lam colours after routing to the moulded design on one side and 2mm plain and / or pre-lam Pac sheet on other side of the EPS. The edge of panel to be sealed with lipping of 10mm wide PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent cement) and stiles sides 25mm(5mmX5) thick and 30mm width Pac sheet fitted along MS tube for lock provision for lock height 5mm thick Pac sheet of size 150mmX100mm fixed with upper and lower face of inner side of EPS panel etc., complete as per direction of Engineer ? in-Charge, manufacture specification and drawing including supplying and fixing ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop bushes including labour charges for fixing the shutter to frame etc., including overheads & contractors profit complete for finished item of work for door of size 800mm x 2100mm.all floors

Quantity69

Rate-

Amount 197133

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and fixing factory made UPVC white colour sliding glazed window comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.ALL FLOORS

Quantity186

Rate-

Amount 1702830

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and fixing factory made uPVC white colour fixed glazed windows / Ventilators comprising of uPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made. Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.

Quantity78

Rate-

Amount 516672

Quantity77

Rate-

Amount 510048

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of Aluminium louvers as per approved drawing with powder coated aluminium sections of Series C Jindal sections and outer frame with bottom ,middle ,sides ,&top with size 68.5x38.1 mm , 1.75mm thick (jindal section code : 21150) and , mullions/louvers of jindal code-21150 ,1.4mm thick fixed louvers with door opening at bottom of size 1.00x1.50 meter main frame of size 65x25mm,1.25mm thick (jindal code : 14031),mullions/louvers of jindal code-21150 ,1.4mm thick fixed louvers including aluminium handle 100mm long ,al aldrop 200mm long , 3Nos of Al Butt hinges 100mm long , supply and fixing all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work including cost and conveyance of materials, labour and all operational and incidental charges etc., coplete for finished item of work or as directed by the engineer incharge in - Al louvers (4000x2945mm) All Floors (AL-I (4000 X 2945mm)

Quantity23.56

Rate-

Amount 119614.12

Quantity5.57

Rate-

Amount 31671.02

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing jallies ( cement concrete ) of 50mm thick as per the design approved by the Engineer-in-Charge including cost and conveyance of materials to site and labour charges etc., overheads & contractors profit complete for finished item of work. All Floors

Quantity52

Rate-

Amount 20072

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Reinforced cement concrete (1:4:8) proportion (Cement: fine aggregates: coarse aggregate) using 40mm size (SS5) hard trap metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site including centering using Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., shuttering, machine mixing, laying concrete, lifting concrete manually , vibrating, curing, etc., and overheads & contractors profit complete as per drawings but excluding cost of steel and it's fabrication charges for finished item of work (APSS NO. 402 & 403) for dummy columns. Third Floor

Quantity78

Rate-

Amount 523770

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Roofing with Polycorbonite Multyvole UV Coated 10mm thick Sheet and Aluminium flat fixed with G.I ?J? bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) , complete, excluding the seigniorage charges, cost of purlins, rafters, trusses including cost and conveyance of all materials , labour charges , overheads and contractors profit etc., complete for finished item of work in all floors. open to sky

Quantity40

Rate-

Amount 71160

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing 50mm dia nominal bore Medium Grade properties & weight as per IS 1239 ISI mark MS Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for stair case head room roof. open to sky

Quantity50

Rate-

Amount 32550

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawing to be supplied at the time of execution of work, including cost and conveyance of all Mild steel Tubes & Pipes sections and all wastages such as overlaps, couplings, welede joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position, including cost of Labour charges for erecting & fixing all structural steel works like heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position etc. complete for finished item of work.

Quantity900

Rate-

Amount 103500

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and fixing in true horizontal level 15 mm - Mineral Fiber Ceiling tile of 595 x 595 (Square edge Fissura fine model) using hot dipped Galvanized Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire including cost and conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making, overheads & contractor profit etc., complete for finished item of work in all floor in all floors. Ground Floor

Quantity480

Rate-

Amount 488160

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318) 152.40mm dia upto 1524.0mm (5') depth manhole to manhole up to septic tank (5' depth)

Quantity123

Rate-

Amount 84624

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBT Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.

Quantity8

Rate-

Amount 50152

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBT Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.

Quantity5

Rate-

Amount 48960

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.

Quantity8

Rate-

Amount 29432

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Quantity9

Rate-

Amount 4959

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges, overheads & contractors profit etc., complete for finished item of work.

Quantity8

Rate-

Amount 34208

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Quantity33

Rate-

Amount 165000

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series Chrome plated with 7 years warranty including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.

Quantity34

Rate-

Amount 145180

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.

Quantity28

Rate-

Amount 96012

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.

Quantity26

Rate-

Amount 57252

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work

Quantity29

Rate-

Amount 69890

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc., complete including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors

Quantity29

Rate-

Amount 6931

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.

Quantity29

Rate-

Amount 15660

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of Towel rail 24 " Jaquar make Cintinental series Chrome finish with 7 years warranty including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.

Quantity29

Rate-

Amount 46023

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (short body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.

Quantity41

Rate-

Amount 10660

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing 110 mm Dia ISI marked PVC down water take pipes with single socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, couplers, shoes, iron / PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., and overheads & contractors profit complete for finished item of work. (APSS No. 1328)

Quantity128

Rate-

Amount 34560

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. 15.90mm OD pipe - SDR 11.00

Quantity50

Rate-

Amount 4150

Quantity120

Rate-

Amount 15240

Quantity180

Rate-

Amount 56160

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work. For 25mm dia :

Quantity15

Rate-

Amount 18060

Quantity15

Rate-

Amount 27300

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) For 75mm dia

Quantity130

Rate-

Amount 24050

Quantity207

Rate-

Amount 53613

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.

Quantity90

Rate-

Amount 12510

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.

Quantity50000

Rate-

Amount 300000

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Earth work excavation for BUILDING foundation (for SUMPS, TANKS & Open excavation) and depositing on bank for all lifts and with an initial lead of 10m including, labour charges such as shoring, sheeting, planking, strutting etc., for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308) in Ordinary soil- Mechanical Means-Upto 3M depth

Quantity418

Rate-

Amount 44726

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed trap from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Quantity12.7

Rate-

Amount 49797

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., complete for fnished item of work (APSS NO.309&310).

Quantity144

Rate-

Amount 6768

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

Quantity26.19

Rate-

Amount 244452

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch) RCC Walls - 230mm thick for Septic Tank

Quantity101

Rate-

Amount 317544

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch) RCC Walls - 200 mm thick for Sump.

Quantity88

Rate-

Amount 253616

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for BEAMS & SLABS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch) For Septic Tank Beams

Quantity3.7

Rate-

Amount 40223

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for BEAMS & SLABS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch) Septic tank Top Slabs- 150 mm thick

Quantity81

Rate-

Amount 118422

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for BEAMS & SLABS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch) Sump Top Slabs- 150 mm thick

Quantity26

Rate-

Amount 38012

Quantity6.98

Rate-

Amount 537725

Quantity407

Rate-

Amount 180708

Quantity331

Rate-

Amount 152260

Quantity331

Rate-

Amount 157556

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Forming embankment with borrowed useful earth from outside road boundary by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P , complete for finished item of work as per MoRT&H specification 305 (5th revision) .

Quantity1100

Rate-

Amount 276100

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Construction of granular sub-base by providing HBT Material conforming to grading -V of MoRT&H table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means on prepared surface mixing by mix in place method with rotavator/ approved means at OMC and compacting with with vibratory power roller to achieve the desired density, complete as per specifications 401 Vth revision and as directed by Engineer -in-charge (Payment will be made based on levels for finished item of work).

Quantity95

Rate-

Amount 154470

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing, Laying, Spreading and compacting graded HBT crushed stone aggregate to Wet Mix macadem specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.

Quantity142

Rate-

Amount 268664

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and applying prime coat with bitumen emulsion (SS1) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for finished item of work etc., complete as per MoRT&H Specification 502 (5th revision) and as directed by the Engineer-in-charge

Quantity630

Rate-

Amount 24444

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and applying tack coat with bitumen VG-10 (Bulk) using Bitumen pressure distributor at the rate of 0.20 kgs per sqm on the prepared bituminous surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.

Quantity600

Rate-

Amount 6540

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing and laying of 30 mm thick Bituminous Concrete with 100 - 120 TPH batch type hot mix plant producing an average output of 75 tones per hour using hard blasted Dolamite crushed aggregates of Grading ? II as per Table 500-17 of specification 507 of MoRT&H (5th revision), premixed with Bituminous binder of VG 30 Grade @ 5.4 % of mix and filler, transporting the hot mix to work site, laying with hydrostatic sensor paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer-in-Charge

Quantity18

Rate-

Amount 150606

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Laying of ISI 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid FRLS PVC pipe concealed in Roof Slabs with all required PVC Deep Boxes including masonary work and labour charges etc., complete 6.1.6 Make :Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar / Polyline/ Polycab /Orbit/Anchor/Beljin

Quantity8107

Rate-

Amount 584920.05

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and laying of ISI 20mm outer dia medium (1.55mm thickness) grade with IS:9537 part 3 regid FRLS PVC pipe consealed in wall with all required PVC Junction Boxes including masonary work and labour charges etc., complete for Run of mains. 5.1.1 Make :Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar / Polyline/ Polycab /Orbit/Anchor/Beljin

Quantity200

Rate-

Amount 15634

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and laying of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 regid FRLS PVC pipe consealed in wall with all required PVC Junction Boxes including masonary work and labour charges etc., complete for Run of mains. 5.1.2 Make :Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar / Polyline/ Polycab /Orbit/Anchor/Beljin

Quantity3634

Rate-

Amount 314195.64

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and laying of ISI 32mm outer dia medium (2.10mm thickness) grade with IS:9537 part 3 regid FRLS PVC pipe consealed in wall with all required PVC Junction Boxes including masonary work and labour charges etc., complete for Run of mains.. 5.1.3 Make :Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar / Polyline/ Polycab /Orbit/Anchor/Beljin

Quantity50

Rate-

Amount 5289

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Fixing of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 regid FRLS PVC pipe on surface of wall with PVC junction boxes fixing on chromium plated metallic base saddles including all required materials and labour charges etc., complete for run of mains. 2.1.2 Make :Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar / Polyline/ Polycab /Orbit/Anchor/Beljin

Quantity100

Rate-

Amount 7158

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Wiring with run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B (for Non Residential Building) Copper cable Makes:Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM Accessories Makes: Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway /Logus Platina/ Panasonic Vision / Salzer S90series/Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/

Quantity371

Rate-

Amount 245869.12

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Wiring with run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 2way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for 2 way light and bell points in N.R.B Copper cable Makes:Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM Accessories Makes: Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway /Logus Platina/ Panasonic Vision / Salzer S90series/Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/

Quantity6

Rate-

Amount 5964.48

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Wiring with run of 3 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1 way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust points in N.R.B Copper cable Makes:Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM Accessories Makes: Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway /Logus Platina/ Panasonic Vision / Salzer S90series/Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/

Quantity116

Rate-

Amount 100413.08

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Run of 2 of 22/0.3mm (1.5 Sq.mm)FRLS / HFFR / ZHFR P.V.C. insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete.13.1.6 Copper cable Makes:Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM

Quantity1500

Rate-

Amount 74640

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Run of 3 of 36/0.3mm (2.50 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., completecomplete as required complete for switch boards. 13.1.18 Copper cable Makes:Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM

Quantity6828

Rate-

Amount 750943.44

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Run of 3 of 56/0.3mm (4.00 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete. for 16A and Computer sockets sockets. 13.1.19 Copper cable Makes:Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM

Quantity4604

Rate-

Amount 720802.24

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Run of 3 of 84/0.3mm (6.0 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete for AC points & SDB's etc as required. 13.1.20 Copper cable Makes:Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM

Quantity50

Rate-

Amount 11197

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Run of 5 of 84/0.3mm (6.0 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for LDBs] 13.1.24 Copper cable Makes:Finolex / RR kabel / Havells /KEI/ Polycab/Gloster/Goldmedal/GM

Quantity400

Rate-

Amount 152108

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Run of 5 of 140/0.3mm (10.0 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete for run of mains from Power panel board to TPN DB"s with pin type lugs and connections etc., complete. [for PDBs] 13.1.25 Copper cable Makes:Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM

Quantity500

Rate-

Amount 283130

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 6A/10A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch, 3 Module box with cover frame on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B 12.1.15 Accessories Makes: Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway /Logus Platina/ Panasonic Vision / Salzer S90series/Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/

Quantity91

Rate-

Amount 36641.15

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 4 Nos 6A ISI mark Modular type switches with 6A 3/2 pin wall plug sockets on suitable cover frame to be fixed on Modular box including cost and coveyance of all material and all labour charges etc., complete for Computers in N.R.B. / R.B 12.1.20 Accessories Makes: Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway /Logus Platina/ Panasonic Vision / Salzer S90series/Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/

Quantity223

Rate-

Amount 343455.68

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of ISI mark 16A 3pin / 6A 3 Pin 1 way Modular combi socket, 16 Amps Modular switch, 3 Modular box with suitable cover frame and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B 12.1.18 Accessories Makes: Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway /Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/

Quantity183

Rate-

Amount 104165.43

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of Push type button motor starter for A.C Units including internal connection and labour charges for Flush Mounting etc., complete 1.8.2 q Accessories Makes: Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway /Logus Platina/ Panasonic Vision / Salzer S90series/Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/

Quantity72

Rate-

Amount 55216.8

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 18W/20W, 1200mm length LED batten light withextruded alluminium housing and polycarbonate cover, input voltageAC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%,with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimumCRI>70, .etc., complete. Elec 3.8.13 a) LUMINAIRE MAKE : Phillips / GEVenture / Crompton/ Wipro/ Bajaj/Havells/ Halonix/Jaquar/HPL/GM/GreenLites/ GoldMedal /Eveready b)LED MAKE : PHILIPS LUMILEDS/CREE/ NICHIA/ OSRAM/SAMSUNG/Everlight.

Quantity12

Rate-

Amount 10907.04

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, transportation and fixing of 36W Recessed / Surface mounting 2' x 2' (600x600 mm) LED luminaire made of CRCA sheet housing with powder coated with acrylic diffuser, Constant current Driver as per IS:15885 (Part 2/ Sec 13) : 2012 , With System lumen output = 3200lm operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LED's having efficacy of > 100 lumens / watt, CCT: 3000K - 5700K, minimum CRI>70, .etc.,, complete.3.8.20 a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Quantity253

Rate-

Amount 1006059.56

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 24W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 ,operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete a) LUMINAIRE MAKE : Phillips / GEVenture/ Crompton /Wipro/ Bajaj/Havells/ Halonix/Jaquar/HPL/GM/GreenLites / GoldMedal/Eveready/FortuneArt b)LED MAKE: PHILIPS LUMILEDS / CREE/ NICHIA /OSRAM /SAMSUNG /Everlight.

Quantity36

Rate-

Amount 59306.76

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 18W heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete 3.8.1 e a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj/ Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/ Eveready/FortuneArt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Quantity8

Rate-

Amount 14315.44

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 12W heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete 3.8.1 e a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj/ Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/ Eveready/FortuneArt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Quantity21

Rate-

Amount 32806.2

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 9W heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete 3.8.1 e a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj/ Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/ Eveready/FortuneArt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Quantity41

Rate-

Amount 44252.94

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Transportation of 6W LED COB Spot Light, suitable for Recessed mounting made of diecast alluminium body with powder coating, with Driver, operating voltage range of 150 to 265 Volts AC,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete Elec 3.8.6 a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj/ Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/FortuneArt b) LED MAKE : Bridge Lux / LUMILEDS / CREE / NICHIA / Epistar/Sunpo

Quantity8

Rate-

Amount 4999.04

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, transportation and fixing of 24W LED single colour Wall washer, 1000mm length, IP65, made of diecast alluminium body with powder coating, with Driver, operating voltage range of 150 to 265 Volts AC, CCT: 3000-4000K , beam angle 25/45 degrees, minimum CRI>70 including fixing to the ceiling with necessary mounting arrangement cost of all accessories and giving connections etc., complete. Elec 3.8.11 a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/ GreenLites/HPL /Eveready/ FortuneArrt b) LED MAKE :Bridge Lux / LUMILEDS / CREE / NICHIA / Epistar.

Quantity4

Rate-

Amount 21814.08

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of ISI mark batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7.0W LED (for new installation). 14.1.8 Accessories Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor LED Makes: Phillips /Crompton / Bajaj / Havells / Halonix/GM/HPLSyska / Green Lites / Fortune Art / GoldMedal

Quantity2

Rate-

Amount 441.96

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of ISI mark batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 0.5W LED (for new installation). 14.1.8 Accessories Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor LED Makes: Phillips /Crompton / Bajaj / Havells / Halonix/GM/HPLSyska /Green Lites / Fortune Art / GoldMedal

Quantity4

Rate-

Amount 474.92

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, Transportation and Fixing of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator including all standard accessories and all labour charges etc., complete. 23.1.2 Makes : Crompton HS Plus / Havells ES Neo/Orient Energy Star

Quantity87

Rate-

Amount 214315.8

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of Modular type 2- Module, Electronic fan regulator for sweep AC ceiling fans of 900mm / 1200mm / 1400mm in the existing switch board. 23.1.8 Accessories Makes: Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway /Logus Platina/ Panasonic Vision / Salzer S90series/Precision/ Koncept (Samrat/ Qura) /Ploycab(Levana)/

Quantity87

Rate-

Amount 41020.5

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of fan hook in RCC slab of 12/15mm dia MS Rod while laying the slab. 23.1.14

Quantity87

Rate-

Amount 5436.63

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, Transportation and Fixing of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete including making hole in wall and masonary work and all labour charges etc., complete. 23.1.16 Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air- DB / Orient hill air/Halonix /Polycab/ G.M. (Xenix)

Quantity29

Rate-

Amount 69323.34

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of GI louver shutter suitable for 12" Exhaust fan including all labour charges etc complete with connections and colouring matching to the wall with enamel paint.

Quantity29

Rate-

Amount 4942.18

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, Transportation and Fixing of 90W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >110lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT:3000K - 5700K, minimum CRI>70, etc., complete including fixing of luminaire on wall/Pole with 1.0 mt of 40mm dia GI pipe bracket and anti-tilting MS flat, with 2.5 Sq.mm copper cable including all labour charges and giving connections etc., complete. 22.1.11 a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE-Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Artt (Leaf) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.

Quantity14

Rate-

Amount 160502.16

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of (8 +12) 4 Way TPN DB Horizontal with IP 43 Protection suitable for 12 Nos S.P out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. with 1 No 63A MCB as incomer and 12 Nos 6-32 A 10kA SP MCBs of including internal connections and labour charges for Flush Mounting etc., complete (LIGHTING/POWER DB). 17.1.8 DB Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/Seimens/Havells STADx/L&T-Newrange/Indo Asian-Opti Pro/ HPL(Techno). MCB makes:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)

Quantity1

Rate-

Amount 9790.2

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of (8 +18) 6 Way TPN DB Horizontal with IP 43 Protection suitable for 18 Nos S.P out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. with 1 No 63A MCB as incomer and 18 Nos 6-32 A 10kA SP MCBs of including internal connections and labour charges for Flush Mounting etc., complete. (LIGHTING/POWER DB). 17.1.36 DB Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Havells STADx/L&T-Newrange/Indo Asian-Opti Pro/ HPL (Techno). MCB makes:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)

Quantity8

Rate-

Amount 110865.52

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of (8 +24) 8 Way TPN DB Horizontal with IP 43 Protection suitable for 24 Nos S.P out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. with 1 No 63A FP MCB as incomer and 24 Nos 6-32 A 10kA SP MCBs of including internal connections and labour charges for FLUSH Mounting etc., complete. (LIGHTING/POWER DB). 17.1.60 DB Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/Seimens/ Havells STADx/L&T-Newrange/Indo Asian-Opti Pro/ HPL(Techno). MCB makes:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)

Quantity12

Rate-

Amount 188657.76

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 4 Way VTPN DB with IP 43 Protection.suitable for accomodating 125A 4 Pole MCCB as incomer and TP/SP MCBs as outgoing etc., as per IS 8623; IS 13032; IEC 61439-3 with 125 4 Pole MCCB Adjustable and 4 Nos 40-63A 10KA TP MCB, C/D Curve ISI Mark including internal connections and labour charges for Flush Mounting etc., complete.18.1.50 DB Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Havells STADx/L&T-Newrange/Indo Asian-Opti Pro/ HPL (Techno). MCCB Makes: L&T- D shine/ Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL/ Hager-h3/C&S -Winbreak2/HPL-Techno MCB makes:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)

Quantity1

Rate-

Amount 29417.76

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 8 Way VTPN DB with IP 43 Protection.suitable for accomodating 125A 4 Pole MCCB as incomer and TP/SP MCBs as outgoing etc., as per IS 8623; IS 13032; IEC 61439-3 with 125A 4 Pole MCCB Adjustable and 8 Nos 40-63A 10KA TP MCB, C/D Curve ISI Mark including internal connections and labour charges for Flush Mounting etc., complete..18.1.54 DB Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/Seimens/Havells STADx/L&T-Newrange/Indo Asian-Opti Pro/ HPL(Techno). MCCB Makes: L&T- D shine/ Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL/ Hager-h3/C&S -Winbreak2/HPL-Techno MCB makes:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)

Quantity3

Rate-

Amount 117369.99

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for 10 Nos S.P out goings and for 1 No Incommer including Supply and Fixing of 1 No 40 A DP Isolator and 10 Nos 6-32 A 10kA SP MCBs with internal connections and all labour charges etc., complete for FLUSH Mounting 16.1.28 DB Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/Seimens/Havells STADx/L&T-Newrange/Indo Asian-Opti Pro/ HPL(Techno). MCB makes:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)

Quantity1

Rate-

Amount 6266.44

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply Installation Testing & commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated/epoxy/PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/ switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (Panel to be fabricated from Branded, Reputed and CPRI approved fabricator). INCOMER 400A 4 Pole MCCB / Confirms to IS/IEC 60947-2 having Breaking Capacity 35 KA with thermal magnetic release Panel Mounted, arrangement with all connections etc., complete on existing panel Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2/ HPL (Techno) - 1 No Supply and erection of Panel mounting cubical type L.T heavy duty ON LOAD change over switch of 250A, 4 pole, 415V, 50 Hz. with all accessories etc., complete on existing control panel. Makes: Socomec / L & T / HPL / Havells/ C&S - 1 No METERING EQIUPMENT Supply and Fixing of Digital type (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.Make: Conzerve /Elmeasure /Meco /HPL /L&T/socomec - 1No Supply and Fixing of Digital type CT operated direct reading type Ammeter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Make: Conzerve / Elmeasure / Meco / HPL / L&T / Schneider / AE / Socomec. - 1No Supply and Fixing of selector switch for voltmeter (4 position ) including making connection etc. as required Make: L&T /C&S/SALZER/HPL. - 1No Supply and Fixing of CT linked selector switch of 10 A for Ampere meter (4position ) including making connection etc. as required. Make: L&T / C&S/ SALZER /HPL. - 1No Supply and Fixing of 240/220 V, LED (22.5 mm dia) Red/yellow/Green colour Pilot lamp with integral circuit, terminal block, including connection etc. as required - 5 No Supply and Fixing of 240/220 V, LED (22.5 mm dia) Blue colour Pilot lamp with integral circuit, terminal block, including connection etc. as required - 1No Supply and Fixing of Current Transformer from 400/5 Ratio , 10 VA , class 1 accuracy, with all necessary support in existing panel including connection etc. as required Make: Kappa / L&T / Seimens/ C&S / Schneider - 3 No Supply and Fixing of energy analyser (multy function energy meter) with LCD/LED display capable of minimum 20 numbers electrical parameters display with 1A/5A CT input for LV/ HV network, RS 485 communication port etc. complete in all respect. - 1No 10kA, 6 to 32A SP MCBs. - 6 No BUSBAR Supply and fixing of Electrolytic grade aluminium bus bars by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending, cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. For Bus Bars vertical & horizontal, Phases & Neutral equal sizes of 50mm x 10mm x 4R and for sectional bus bars and extended links to MCCBs shall be more than or equal to the ratings of MCCBs. Control wiring, Earth Bus Bar, Door Loop earhtings, Labour charges for errection of switch gears, panels boards including all labour charges etc with connections for finished items of works including transportation charges. OUTGOING 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted., arrangement with all connections etc., complete on existing panel Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2/ HPL (Techno) - 3 Nos 63A 3 Pole MCCB, Adjustable, Confirms to IEC 60947-2 having Breaking Capacity 16KA with thermal magnetic release Panel Mounted., arrangement with all connections etc., complete on existing panel Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2/ HPL (Techno) - 6 Nos 3 pole 63A 10KA C/D Curve ISI Mark. Makes: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) - 5 Nos 1 pole 6-32A 10KA C/D Curve ISI Mark. Makes: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) - 3 Nos

Quantity1

Rate-

Amount 224282

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and transportation of 3.5 core, 35 Sq.mm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I. 4.1.1 h Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel

Quantity150

Rate-

Amount 42606

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and transportation of 3.5 core, 240 Sq.mm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I.4.1.1 0 Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel

Quantity300

Rate-

Amount 393675

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.'3.5 core, 240 Sq.mm Elec 4.1.11 i Makes:Dowels/Comet/SMI

Quantity2

Rate-

Amount 1476.98

Quantity8

Rate-

Amount 1363.2

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables from 70 Sqmm up to 400 sqmm covering the cable with bricks and back filling of Trench duly providing route indicator at every 8 Mtrs distance embedded in C.C including cost and conveyance of materials and labour charges etc., complete. 24.1.2

Quantity250

Rate-

Amount 71720

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply,transporatation & installation of '150mm X 50mm X 1.6mm size size of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete 4.3.1 b

Quantity60

Rate-

Amount 22152

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply,transporatation & installation of '300mm X 50mm X 1.6mm size size of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete 4.3.1 c

Quantity10

Rate-

Amount 6816.9

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of the 150mm x 38mm sizes of G I Raceways of 2mm thick with top cover and required hard ware etc complete.7.2.1 b

Quantity220

Rate-

Amount 148720

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of the 300mm x 38mm sizes of G I Raceways of 2mm thick with top cover and required hard ware etc complete.7.2.1 c

Quantity130

Rate-

Amount 149177.6

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of the 172mm x 52mm sizes of G.I. Junction box of 2mm thick for direct acces to cables at the inter section of Raceways.7.2.2 a

Quantity31

Rate-

Amount 11798.91

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of the 372mm x 52mm sizes of G.I. Junction box of 2mm thick for direct acces to cables at the inter section of Raceways.7.2.2 c

Quantity22

Rate-

Amount 19746.32

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Important equipment with 2.5Mtr length 40mm dia 'B' class G.I pipe and 18" dia 3" thick hume pipe ring with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length to be bolted with nut bolts including supply and termination of No.8 G.I.wire from bottm of the pipe with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) 25.1.2

Quantity3

Rate-

Amount 14492.04

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia 'B' Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder and providing 18" dia 18" height 3" thick hume pipe ring covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).(Data No.)

Quantity3

Rate-

Amount 43182.18

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr). 27.1.5

Quantity30

Rate-

Amount 2992.5

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Run of 25mm x 3mm copper strip (Cuurrent Carrying Capacity 270A) including cost of all accessories and labour charges etc., complete. (0.663Kgs/1Mtr) 28.1.8

Quantity50

Rate-

Amount 22990

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr) 27.1.1

Quantity20

Rate-

Amount 390.8

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of 1.5 TR 3 Star split AC unit capable of delivering 18000 BTU / hr and above with operating on refrigerant R-32 / R-410A with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc. 5.5.1 b Makes: Blue Star 3HW18VCTU / Daikin FTE-M or N Sereis / Hitachi / Voltas / Carrier Superia.

Quantity1

Rate-

Amount 47150.23

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of 2.0 TR 3 Star split AC unit capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc. 5.5.1 b Makes: Blue Star 3HW18VCTU / Daikin FTE-M or N Sereis / Hitachi / Voltas / Carrier Superia.

Quantity16

Rate-

Amount 827117.28

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Installation of Split Air Conditioners.5.9.30

Quantity17

Rate-

Amount 30903.28

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of split AC unit 5.9.24

Quantity17

Rate-

Amount 23177.46

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, transportation, fixing and commissioning of fully automatic 4.00 KVA line voltage stabilizer including cost, conveyance of all mateials and all labour charges etc., complete 26.1.7 Stabilizer Makes : V-Guard/Real Guard/Uni Stab/ITL

Quantity1

Rate-

Amount 3255.07

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, transportation, fixing and commissioning of fully automatic 5.00 KVA line voltage stabilizer including cost, conveyance of all mateials and all labour charges etc., complete 26.1.7 Stabilizer Makes : V-Guard/Real Guard/Uni Stab/ITL

Quantity16

Rate-

Amount 63206.24

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, installation, testing and commissioning of the 40.0 KVA, 312/360V DC UPS on line UPS system as per IEC 62040-I(Safety) ,IEC 62040-3(Performance) for critical IT solutions, fully digital IGBT Converter and Inverter ,with Internal /External isolation transformer from DC to AC, PWM, pure sine wave out put, double conversion, output pf 0.9, with parallelling facility, standard communicaton features/options auto and manual static by pass switch, three phase input / three phase output, accoustic level shall be less than 58dB at 1 mtr distance, with all accessories and labour charges etc., complete excluding batteries. Elec 11.1.3 e Makes: Numeric/APC/Consul Neowatt/Sakshham/Emerson

Quantity2

Rate-

Amount 795305

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of 12V 65 AH SMF battery with 3 years warrenty including wire leads .connections etc complete.. Makes: Quanta / Racket/Exide.Elec 11.1.11

Quantity60

Rate-

Amount 490816.8

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and providing of battery rack upto 20 to 30 batteries (65 & 100 AH) Elec 11.1.8

Quantity2

Rate-

Amount 20450.7

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and fixing of Modular telephone Jack with connector on modular box with cover frame in existing surface / consealed pipe wiring including cost and coveyance of all material and all labour charges etc., complete in N.R.B. / R.B. 12.1.21 Accessories Makes: Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway /Logus Platina/ Panasonic Vision / Salzer S90series/Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/

Quantity23

Rate-

Amount 5017.22

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of 5 pair telephone copper wire . Elec 7.3.6 Makes: Finolex / Delton / Surabi / Polycab

Quantity1150

Rate-

Amount 32660

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of 10 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Elec 7.3.12 Makes: Krone or equivalent make.

Quantity1

Rate-

Amount 670.33

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of 20 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Elec 7.3.13 Makes: Krone or equivalent make.

Quantity1

Rate-

Amount 1022.54

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of 50 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Elec 7.3.14 Makes: Krone or equivalent make.

Quantity1

Rate-

Amount 2130.28

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of 10 pair telephone copper wire . Elec 7.3.9 Makes: Finolex / Delton / Surabi / Polycab

Quantity50

Rate-

Amount 1988.5

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply of 20 pair telephone copper wire . Elec 7.3.10 Makes: Finolex / Delton / Surabi / Polycab

Quantity100

Rate-

Amount 7953

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply installation testing and commisioning of 1no of Cat-6 Tooless built-in crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate, Metal box for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant. 7.1.3 Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Quantity291

Rate-

Amount 128942.1

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply, laying, testing and commissioning of 4-pair, Cat-6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, UTP Cable , Meets or exceeds ANSI/TIA- 568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete 7.1.1 a Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Quantity8730

Rate-

Amount 317422.8

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply installation testing and commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots compatible to T568A,T568B specifications including making connections to information outlets of length - 1mtr/3 ft 7.1.4 a Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Quantity291

Rate-

Amount 61165.29

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply installation testing and commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots compatible to T568A,T568B specifications including making connections to information outlets of length - 2mtr/7 ft 7.1.4 a Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Quantity291

Rate-

Amount 72735.45

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Fixing, Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS Chasis, powder coated Modular 24 Ports Patch Panels (upgradable to intelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessory connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps.7.1.13 d Makes: Systimax /Legrand/Molex/Panduit/Siemond/AMP

Quantity16

Rate-

Amount 99981.28

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply & Fixing of Cisco small business 24 port Gigabit POE Managed Switch. 7.1.19 Make : Cisco Model:SG-350-28PP or equivalent in Juniper/Extreme

Quantity16

Rate-

Amount 454460

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Fixing, Installation, Testing and Comissioning of 6U(44 mm ) wall mounted Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. 7.1.14 a Make: APW/HCL/Valrack/Netrack

Quantity6

Rate-

Amount 31903.08

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Fixing, Installation, Testing and Comissioning of 9U(44 mm ) wall mounted Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. 7.1.14 b Make: APW/HCL/Valrack/Netrack

Quantity2

Rate-

Amount 12497.66

Construction of Entrepreneurship ,Innovation ,Start up Centre in JNTU College of Engineering, Puliv;Supply and Fixing, Installation, Testing and Comissioning of 15 U(44 mm) wall mounted Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. 7.1.14 b Make: APW/HCL/Valrack/Netrack

Quantity1

Rate-

Amount 8316.62

236 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Roads And Buildings Department Tender