Rajiv Gandhi University Of Knowledge Technologies Tender

Execution of repairing works in newly allotted flats;Providing and fixing of ISI marked SS handles (IS 208) 150mm long as er CPWD-9.66.12 including conveyance of materials and complete item of work and CP & OH

Execution of repairing works in newly allotted flats;Providing and fixing of ISI marked SS Tower bolt-150mm long (IS 204) as per CPWD-9.63.1 including conveyance of materials and complete item of work and CP & OH

Execution of repairing works in newly allotted flats;Providing and fixing of ISI marked SS butt hinges-100mm long (IS 205) as per CPWD-9.70.1 including conveyance of materials and complete item of work and CP & OH

Execution of repairing works in newly allotted flats;Providing and fixing of ISI marked SS Aldrop-200mm long (IS 205) as per CPWD-9.65.1 including conveyance of materials and complete item of work and CP & OH

Execution of repairing works in newly allotted flats;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM .The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.sof screws to be provided for each vertical member & minimum 2no.s for horizontal member including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm)

Execution of repairing works in newly allotted flats;Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 650-750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002

Execution of repairing works in newly allotted flats;Plain Cement Concrete (1:3:6) nominal mix using 10mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using hand mix including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, centering charges, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402)- at first floor

Execution of repairing works in newly allotted flats;Plain Cement Concrete (1:3:6) nominal mix using 10mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using hand mix including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, centering charges, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402)- at third floor

Execution of repairing works in newly allotted flats;Plain Cement Concrete (1:3:6) nominal mix using 10mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using hand mix including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, centering charges, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402)- at forth floor

Execution of repairing works in newly allotted flats;Supplying and fixing of two shutter cupboards as per drawing with medium teak wood frames of size 75mm x 40mm and MDF Board Interior grade both sides laminated 18mm thick for shutters with 18mm x 12mm teak wood beading alround and supplying and fixing powder coated MS fixtures 3 Nos. butt hinges of size 100mm long(for each shutter), tower bolt 2 Nos. of 100mm x 10mm, 2 Nos of handles 100mm long and standard locking arrangements for shutters including cost and conveyance of all materials to site, labour charges, over heads and contractor profit etc., complete for finished item of work.

Execution of repairing works in newly allotted flats;Removal of damaged glass and Supplying & fixing of pin headed window galss including beading, glass panes of any thickness to the existing door/window panes including fixing the beading and for complete item of work

Execution of repairing works in newly allotted flats;Plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) - first floor

Execution of repairing works in newly allotted flats;Plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) - third floor

Execution of repairing works in newly allotted flats;Plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) - forth floor

Execution of repairing works in newly allotted flats;Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors.