Public Health And Municipal Engineering Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Public Health And Municipal Engineering Department - PHMED Tender
Civil And Construction
Water Storage And Supply
Opening Date8 Feb 2024
Closing Date20 Feb 2024
Tender Amount₹ 4,86,80,772
Costs
EMD
₹ 4,86,808Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
720161Tender No
111/DB/AE/12/AMRUT2.0(Tr-I&II)/ATMKR-WS/2023 Dated.01-02-2024 (3rd Call)Tender Authority
Public Health And Municipal Engineering Department ViewPurchaser Address
-Website
http://http://www.appublichealth.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
8156
1497604
183.62
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Mechanical Means.
2913
258353
88.69
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) / rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH.
583
1004264
1722.58
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
525
158140
301.22
Manufacture, Supply, & Delivery of HDPE pipes PE 100 PN - 6 Kg/ Cm2 Class 3 conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.)
-
-
-
110 OD HDPE Pipes
11999
4163293
346.97
160 OD HDPE Pipes
1230
895366
727.94
200 OD HDPE Pipes
639
724114
1133.2
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.
-
-
-
110 OD HDPE Pipes
11999
514037
42.84
160 OD HDPE Pipes
1230
76616
62.29
200 OD HDPE Pipes
639
57318
89.7
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
120
52353
436.28
160 OD HDPE Pipes
13
20234
1556.53
200 OD HDPE Pipes
7
20351
2907.41
BENDS
-
-
-
110 OD HDPE Pipes
240
107162
446.51
160 OD HDPE Pipes
25
32380
1295.21
200 OD HDPE Pipes
13
32730
2517.71
END CAPS
-
-
-
110 OD HDPE Pipes
40
5180
129.52
160 OD HDPE Pipes
5
1601
320.39
200 OD HDPE Pipes
3
1704
568.08
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
27
10583
391.97
OD 125mm x 140mm
27
14663
543.08
OD 140mm x 160mm
27
20460
757.81
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
3
3146
1048.67
OD 180mm x 200mm
3
4062
1354.29
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
2
3326
1663.32
OD 225mm x 250mm
2
4533
2266.62
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 (Mpa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. (PN 1.6 (Mpa)).
-
-
-
100mm dia Sluice Valves
15
231857
15457.15
100mm dia Scour Valves
8
123657
15457.15
150mm dia Sluice Valves
2
48675
24337.53
150mm dia Scour Valves
1
24337
24337.53
200mm dia Sluice Valves
1
35758
35758.9
200mm dia Scour Valves
1
35758
35758.9
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces.
-
-
-
100mm dia Sluice Valves
15
2239
149.3
100mm dia Scour Valves
8
1194
149.3
150mm dia Sluice Valves
2
506
253.05
150mm dia Scour Valves
1
253
253.05
200mm dia Sluice Valves
1
417
417.47
200mm dia Scour Valves
1
417
417.47
Supply, delivery of CI Specials.
7077.8
609540
86.12
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)
-
-
-
100mm dia
30
9120
304
150mm dia
4
1902
475.72
200mm dia
2
1040
520.01
Construction of RR Masonry in C.M (1: 6) wall valve chamber as per Type design including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc. complete including cost of Plastering, Reinforcement & its fabrication charges.
-
-
-
100mm dia Sluice Valves
15
254467
16964.47
100mm dia Scour Valves
8
226461
28307.74
150mm dia Sluice Valves
2
33928
16964.47
150mm dia Scour Valves
1
29570
29570
200mm dia Sluice Valves
1
19221
19221.63
200mm dia Scour Valves
1
29570
29570
For Road Restoration
-
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
1296
390381
301.22
Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
864
2779116
3216.57
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
1468
7482513
5097.08
Earth filling in foundation trenches with excavated earth as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.
1230
459159
373.3
Carting of Excavated Earth with a lead of 3.00 Kms including Loading and Unloading & Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks excluding loading, unloading and idle hire charges of machinery. (SoR 2017-18, P.No.38, Sl.No.1).
3026
164311
54.3
Bill No : 2 Providing of Distribution system in Zone - II for a Length of 6065.00mts including Road Restoration.
-
-
-
Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam.
136.5
10173
74.53
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work.
363.9
828542
2276.84
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
3728
684535
183.62
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Mechanical Means.
1332
118135
88.69
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) / rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH.
267
459928
1722.58
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
235
70786
301.22
Manufacture, Supply, & Delivery of HDPE pipes PE 100 PN - 6 Kg/ Cm2 Class 3 conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.)
-
-
-
110 OD HDPE Pipes
3685
1278584
346.97
160 OD HDPE Pipes
1443
1050417
727.94
200 OD HDPE Pipes
313
354691
1133.2
250 OD HDPE Pipes
624
1122551
1798.96
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.
-
-
-
110 OD HDPE Pipes
3685
157865
42.84
160 OD HDPE Pipes
1443
89884
62.29
200 OD HDPE Pipes
313
28076
89.7
250 OD HDPE Pipes
624
64465
103.31
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
37
16142
436.28
160 OD HDPE Pipes
15
23347
1556.53
200 OD HDPE Pipes
4
11629
2907.41
250 OD HDPE Pipes
7
39558
5651.21
BENDS
-
-
-
110 OD HDPE Pipes
74
33041
446.51
160 OD HDPE Pipes
29
37561
1295.21
200 OD HDPE Pipes
7
17623
2517.71
250 OD HDPE Pipes
13
63643
4895.67
END CAPS
-
-
-
110 OD HDPE Pipes
13
1683
129.52
160 OD HDPE Pipes
5
1601
320.39
200 OD HDPE Pipes
2
1136
568.08
250 OD HDPE Pipes
3
2525
841.89
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
9
3527
391.97
OD 125mm x 140mm
9
4887
543.08
OD 140mm x 160mm
9
6820
757.81
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
4
4194
1048.67
OD 180mm x 200mm
4
5417
1354.29
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
1
1663
1663.32
OD 225mm x 250mm
1
2266
2266.62
250 OD HDPE Pipes
-
-
-
OD 250mm x 280mm
3
9659
3219.85
OD 280mm x 315mm
3
13657
4552.55
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 (Mpa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. (PN 1.6 (Mpa)).
-
-
-
100mm dia Sluice Valves
5
77285
15457.15
100mm dia Scour Valves
3
46371
15457.15
150mm dia Sluice Valves
2
48675
24337.53
150mm dia Scour Valves
1
24337
24337.53
200mm dia Sluice Valves
1
35758
35758.9
200mm dia Scour Valves
1
35758
35758.9
250mm dia Sluice Valves
1
45600
45600.8
250mm dia Scour Valves
1
45600
45600.8
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces.
-
-
-
100mm dia Sluice Valves
5
746
149.3
100mm dia Scour Valves
3
447
149.3
150mm dia Sluice Valves
2
506
253.05
150mm dia Scour Valves
1
253
253.05
200mm dia Sluice Valves
1
417
417.47
200mm dia Scour Valves
1
417
417.47
250mm dia Sluice Valves
1
593
593.27
250mm dia Scour Valves
1
593
593.27
Supply, delivery of CI Specials.
4134.4
356054
86.12
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)
-
-
-
100mm dia
10
3040
304
150mm dia
4
1902
475.72
200mm dia
2
1040
520.01
250mm dia
2
1484
742.39
Construction of RR Masonry in C.M (1: 6) wall valve chamber as per Type design including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc. complete including cost of Plastering, Reinforcement & its fabrication charges.
-
-
-
100mm dia Sluice Valves
5
84822
16964.47
100mm dia Scour Valves
3
84923
28307.74
150mm dia Sluice Valves
2
33928
16964.47
150mm dia Scour Valves
1
29570
29570
200mm dia Sluice Valves
1
19221
19221.63
200mm dia Scour Valves
1
29570
29570
250mm dia Sluice Valves
1
19221
19221.63
250mm dia Scour Valves
1
39103
39103
For Road Restoration
-
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
567
170791
301.22
Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
378
1215863
3216.57
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
642
3272325
5097.08
Earth filling in foundation trenches with excavated earth as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.
1443
538671
373.3
Carting of Excavated Earth with a lead of 3.00 Kms including Loading and Unloading & Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks excluding loading, unloading and idle hire charges of machinery. (SoR 2017-18, P.No.38, Sl.No.1).
1344
72979
54.3
Bill No : 3 Providing of Distribution system in Zone - III for a Length of 13413.00mts including Road Restoration.
-
-
-
Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam.
201.75
15036
74.53
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work.
804.83
1832469
2276.84
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
7984
1466022
183.62
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Mechanical Means.
2852
252943
88.69
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) / rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH.
571
983593
1722.58
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
511
153923
301.22
Manufacture, Supply, & Delivery of HDPE pipes PE 100 PN - 6 Kg/ Cm2 Class 3 conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.)
-
-
-
110 OD HDPE Pipes
10822
3754909
346.97
160 OD HDPE Pipes
1591
1158152
727.94
200 OD HDPE Pipes
601
681053
1133.2
250 OD HDPE Pipes
252
453337
1798.96
Manufacture, Supply and Delivery of Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage with socket spigot ends conforming to i.s.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K - 7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation, taxes & duties.
-
-
-
300mm dia DI K - 7
147
450509
3064.69
Manufacture As Per Bis 12820/89 With S.B.R. Quality Rubber Confirming To Bis: 5382/85, Supply And Delivery Of Rubber Gaskets Suitable For C.I/ D.I. S/S Pipes Anywhere In A.P. F.O.R. Destination Departmental Stores Including Cost Of Material, Loading, Incidental Handling With Companys Standard Packing, Transportation, Unloading & Stacking including Central Excise Duty, Sales Tax, Octroi And Other Govt. Levies Etc., Comp (Pg No 74/1)
-
-
-
300mm dia DI K - 7
30
6237
207.92
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.
-
-
-
110 OD HDPE Pipes
10822
463614
42.84
160 OD HDPE Pipes
1591
99103
62.29
200 OD HDPE Pipes
601
53909
89.7
250 OD HDPE Pipes
252
26034
103.31
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
109
47554
436.28
160 OD HDPE Pipes
16
24904
1556.53
200 OD HDPE Pipes
7
20351
2907.41
250 OD HDPE Pipes
3
16953
5651.21
BENDS
-
-
-
110 OD HDPE Pipes
217
96892
446.51
160 OD HDPE Pipes
32
41446
1295.21
200 OD HDPE Pipes
13
32730
2517.71
250 OD HDPE Pipes
6
29374
4895.67
END CAPS
-
-
-
110 OD HDPE Pipes
37
4792
129.52
160 OD HDPE Pipes
6
1922
320.39
200 OD HDPE Pipes
3
1704
568.08
250 OD HDPE Pipes
1
841
841.89
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
25
9799
391.97
OD 125mm x 140mm
25
13577
543.08
OD 140mm x 160mm
25
18945
757.81
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
4
4194
1048.67
OD 180mm x 200mm
4
5417
1354.29
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
2
3326
1663.32
OD 225mm x 250mm
2
4533
2266.62
250 OD HDPE Pipes
-
-
-
OD 250mm x 280mm
1
3219
3219.85
OD 280mm x 315mm
1
4552
4552.55
Manufacture, Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings Conforming to IS:9523/2000 having dimentions as per table. The Rates mentioned here under are for Fittings, Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) (Ex-Works) including Transportation, Taxes and Duties Etc. Up to 500 x 500mm dia.
68
8711
128.11
Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994)
-
-
-
300mm dia DI K - 7
147
22680
154.29
Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987
-
-
-
300mm dia DI K - 7
32
6350
198.46
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 (Mpa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. (PN 1.6 (Mpa)).
-
-
-
100mm dia Sluice Valves
14
216400
15457.15
100mm dia Scour Valves
8
123657
15457.15
150mm dia Sluice Valves
2
48675
24337.53
150mm dia Scour Valves
2
48675
24337.53
200mm dia Sluice Valves
1
35758
35758.9
200mm dia Scour Valves
1
35758
35758.9
250mm dia Sluice Valves
1
45600
45600.8
250mm dia Scour Valves
1
45600
45600.8
300mm dia Sluice Valves
1
84658
84658.23
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces.
-
-
-
100mm dia Sluice Valves
14
2090
149.3
100mm dia Scour Valves
8
1194
149.3
150mm dia Sluice Valves
2
506
253.05
150mm dia Scour Valves
2
506
253.05
200mm dia Sluice Valves
1
417
417.47
200mm dia Scour Valves
1
417
417.47
250mm dia Sluice Valves
1
593
593.27
250mm dia Scour Valves
1
593
593.27
300mm dia Sluice Valves
1
844
844.64
Supply, delivery of CI Specials.
7818.4
673320
86.12
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)
-
-
-
100mm dia
28
8512
304
150mm dia
4
1902
475.72
200mm dia
2
1040
520.01
250mm dia
2
1484
742.39
300mm dia
2
1563
781.72
Construction of RR Masonry in C.M (1: 6) wall valve chamber as per Type design including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc. complete including cost of Plastering, Reinforcement & its fabrication charges.
-
-
-
100mm dia Sluice Valves
14
237502
16964.47
100mm dia Scour Valves
8
226461
28307.74
150mm dia Sluice Valves
2
33928
16964.47
150mm dia Scour Valves
2
59140
29570
200mm dia Sluice Valves
1
19221
19221.63
200mm dia Scour Valves
1
29570
29570
250mm dia Sluice Valves
1
19221
19221.63
250mm dia Scour Valves
1
39103
39103
300mm dia Sluice Valves
1
19221
19221.63
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
1238
372910
301.22
Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
825
2653670
3216.57
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
1403
7151203
5097.08
Earth filling in foundation trenches with excavated earth as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.
1591
593920
373.3
Carting of Excavated Earth with a lead of 3.00 Kms including Loading and Unloading & Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks excluding loading, unloading and idle hire charges of machinery. (SoR 2017-18, P.No.38, Sl.No.1).
2838
154103
54.3
Bill No : 4 Providing of Distribution system in Zone - IV for a Length of 11583.00mts including Road Restoration.
-
-
-
Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam.
174
12968
74.53
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work.
695.03
1582472
2276.84
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
6998
1284972
183.62
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Mechanical Means.
2500
221725
88.69
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) / rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH.
500
861290
1722.58
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
451
135850
301.22
Manufacture, Supply, & Delivery of HDPE pipes PE 100 PN - 6 Kg/ Cm2 Class 3 conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.)
-
-
-
110 OD HDPE Pipes
9382
3255272
346.97
160 OD HDPE Pipes
1062
773072
727.94
200 OD HDPE Pipes
253
286699
1133.2
250 OD HDPE Pipes
31
55767
1798.96
Manufacture, Supply and Delivery of Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage with socket spigot ends conforming to i.s.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K - 7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation, taxes & duties.
-
-
-
300mm dia DI K - 7
574
1759132
3064.69
350mm dia DI K - 7
281
1100117
3915.01
Manufacture As Per Bis 12820/89 With S.B.R. Quality Rubber Confirming To Bis: 5382/85, Supply And Delivery Of Rubber Gaskets Suitable For C.I/ D.I. S/S Pipes Anywhere In A.P. F.O.R. Destination Departmental Stores Including Cost Of Material, Loading, Incidental Handling With Companys Standard Packing, Transportation, Unloading & Stacking including Central Excise Duty, Sales Tax, Octroi And Other Govt. Levies Etc., Comp (Pg No 74/1)
-
-
-
300mm dia DI K - 7
115
23910
207.92
350mm dia DI K - 7
57
14959
262.45
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.
-
-
-
110 OD HDPE Pipes
9382
401924
42.84
160 OD HDPE Pipes
1062
66151
62.29
200 OD HDPE Pipes
253
22694
89.7
250 OD HDPE Pipes
31
3202
103.31
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
94
41010
436.28
160 OD HDPE Pipes
11
17121
1556.53
200 OD HDPE Pipes
3
8722
2907.41
250 OD HDPE Pipes
1
5651
5651.21
BENDS
-
-
-
110 OD HDPE Pipes
188
83943
446.51
160 OD HDPE Pipes
22
28494
1295.21
200 OD HDPE Pipes
6
15106
2517.71
250 OD HDPE Pipes
1
4895
4895.67
END CAPS
-
-
-
110 OD HDPE Pipes
32
4144
129.52
160 OD HDPE Pipes
4
1281
320.39
200 OD HDPE Pipes
1
568
568.08
250 OD HDPE Pipes
1
841
841.89
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
21
8231
391.97
OD 125mm x 140mm
21
11404
543.08
OD 140mm x 160mm
21
15914
757.81
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
3
3146
1048.67
OD 180mm x 200mm
3
4062
1354.29
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
1
1663
1663.32
OD 225mm x 250mm
1
2266
2266.62
250 OD HDPE Pipes
-
-
-
OD 250mm x 280mm
1
3219
3219.85
OD 280mm x 315mm
1
4552
4552.55
Manufacture, Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings Conforming to IS:9523/2000 having dimentions as per table. The Rates mentioned here under are for Fittings, Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) (Ex-Works) including Transportation, Taxes and Duties Etc. Up to 500 x 500mm dia.
226
28952
128.11
Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994)
-
-
-
DI K - 7 Pipes
-
-
-
300mm dia DI K - 7
574
88562
154.29
350mm dia DI K - 7
281
54379
193.52
Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987
-
-
-
DI K - 7 Pipes
-
-
-
300mm dia DI K - 7
121
24013
198.46
350mm dia DI K - 7
60
14082
234.7
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 (Mpa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. (PN 1.6 (Mpa)).
-
-
-
100mm dia Sluice Valves
12
185485
15457.15
100mm dia Scour Valves
7
108200
15457.15
150mm dia Sluice Valves
2
48675
24337.53
150mm dia Scour Valves
1
24337
24337.53
200mm dia Sluice Valves
1
35758
35758.9
200mm dia Scour Valves
1
35758
35758.9
250mm dia Sluice Valves
1
45600
45600.8
250mm dia Scour Valves
1
45600
45600.8
300mm dia Sluice Valves
1
84658
84658.23
300mm dia Scour Valves
1
84658
84658.23
350mm dia Sluice Valves
1
117774
117774.73
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces.
-
-
-
100mm dia Sluice Valves
12
1791
149.3
100mm dia Scour Valves
7
1045
149.3
150mm dia Sluice Valves
2
506
253.05
150mm dia Scour Valves
1
253
253.05
200mm dia Sluice Valves
1
417
417.47
200mm dia Scour Valves
1
417
417.47
250mm dia Sluice Valves
1
593
593.27
250mm dia Scour Valves
1
593
593.27
300mm dia Sluice Valves
1
844
844.64
300mm dia Scour Valves
1
844
844.64
350mm dia Sluice Valves
1
1426
1426.44
Supply, delivery of CI Specials.
8186
704978
86.12
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)
-
-
-
100mm dia
24
7296
304
150mm dia
4
1902
475.72
200mm dia
2
1040
520.01
250mm dia
2
1484
742.39
300mm dia
6
4690
781.72
350mm dia
4
4463
1115.87
Construction of RR Masonry in C.M (1: 6) wall valve chamber as per Type design including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc. complete including cost of Plastering, Reinforcement & its fabrication charges.
-
-
-
100mm dia Sluice Valves
12
203573
16964.47
100mm dia Scour Valves
7
198154
28307.74
150mm dia Sluice Valves
2
33928
16964.47
150mm dia Scour Valves
1
29570
29570
200mm dia Sluice Valves
1
19221
19221.63
200mm dia Scour Valves
1
29570
29570
250mm dia Sluice Valves
1
19221
19221.63
250mm dia Scour Valves
1
39103
39103
300mm dia Sluice Valves
1
19221
19221.63
300mm dia Scour Valves
1
39103
39103
350mm dia Sluice Valves
1
37470
37470.42
For Road Restoration
-
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
1069
322004
301.22
Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
713
2293414
3216.57
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
1212
6177660
5097.08
Earth filling in foundation trenches with excavated earth as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.
1062
396444
373.3
Carting of Excavated Earth with a lead of 3.00 Kms including Loading and Unloading & Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks excluding loading, unloading and idle hire charges of machinery. (SoR 2017-18, P.No.38, Sl.No.1).
2464
133795
54.3
Bill No : 5 Providing of Distribution system in Zone - V for a Length of 26619.00mts including Road Restoration.
-
-
-
Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam.
399.75
29793
74.53
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work.
1597.2
3636568
2276.84
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
16289
2990986
183.62
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Mechanical Means.
5818
515998
88.69
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) / rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH.
1164
2005083
1722.58
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
1041
313570
301.22
Manufacture, Supply, & Delivery of HDPE pipes PE 100 PN - 6 Kg/ Cm2 Class 3 conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.)
-
-
-
110 OD HDPE Pipes
19103
6628167
346.97
160 OD HDPE Pipes
3869
2816399
727.94
200 OD HDPE Pipes
1183
1340575
1133.2
250 OD HDPE Pipes
1198
2155154
1798.96
Manufacture, Supply and Delivery of Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage with socket spigot ends conforming to i.s.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K - 7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation, taxes & duties.
-
-
-
300mm dia DI K - 7
681
2087053
3064.69
350mm dia DI K - 7
585
2290280
3915.01
Manufacture As Per Bis 12820/89 With S.B.R. Quality Rubber Confirming To Bis: 5382/85, Supply And Delivery Of Rubber Gaskets Suitable For C.I/ D.I. S/S Pipes Anywhere In A.P. F.O.R. Destination Departmental Stores Including Cost Of Material, Loading, Incidental Handling With Companys Standard Packing, Transportation, Unloading & Stacking including Central Excise Duty, Sales Tax, Octroi And Other Govt. Levies Etc., Comp (Pg No 74/1)
-
-
-
300mm dia DI K - 7
137
28485
207.92
350mm dia DI K - 7
117
30706
262.45
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.
-
-
-
110 OD HDPE Pipes
19103
818372
42.84
160 OD HDPE Pipes
3869
241000
62.29
200 OD HDPE Pipes
1183
106115
89.7
250 OD HDPE Pipes
1198
123765
103.31
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
192
83765
436.28
160 OD HDPE Pipes
39
60704
1556.53
200 OD HDPE Pipes
12
34888
2907.41
250 OD HDPE Pipes
12
67814
5651.21
BENDS
-
-
-
110 OD HDPE Pipes
383
171013
446.51
160 OD HDPE Pipes
78
101026
1295.21
200 OD HDPE Pipes
24
60425
2517.71
250 OD HDPE Pipes
24
117496
4895.67
END CAPS
-
-
-
110 OD HDPE Pipes
64
8289
129.52
160 OD HDPE Pipes
13
4165
320.39
200 OD HDPE Pipes
4
2272
568.08
250 OD HDPE Pipes
4
3367
841.89
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
43
16854
391.97
OD 125mm x 140mm
43
23352
543.08
OD 140mm x 160mm
43
32585
757.81
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
9
9438
1048.67
OD 180mm x 200mm
9
12188
1354.29
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
3
4989
1663.32
OD 225mm x 250mm
3
6799
2266.62
250 OD HDPE Pipes
-
-
-
OD 250mm x 280mm
4
12879
3219.85
OD 280mm x 315mm
4
18210
4552.55
Manufacture, Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings Conforming to IS:9523/2000 having dimentions as per table. The Rates mentioned here under are for Fittings, Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) (Ex-Works) including Transportation, Taxes and Duties Etc. Up to 500 x 500mm dia.
316
40482
128.11
Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994)
-
-
-
DI K - 7 Pipes
-
-
-
300mm dia DI K - 7
681
105071
154.29
350mm dia DI K - 7
585
113209
193.52
Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987
-
-
-
DI K - 7 Pipes
-
-
-
300mm dia DI K - 7
144
28578
198.46
350mm dia DI K - 7
123
28868
234.7
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 (Mpa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. (PN 1.6 (Mpa)).
-
-
-
100mm dia Sluice Valves
24
370971
15457.15
100mm dia Scour Valves
13
200942
15457.15
150mm dia Sluice Valves
5
121687
24337.53
150mm dia Scour Valves
3
73012
24337.53
200mm dia Sluice Valves
2
71517
35758.9
200mm dia Scour Valves
1
35758
35758.9
250mm dia Sluice Valves
2
91201
45600.8
250mm dia Scour Valves
1
45600
45600.8
300mm dia Sluice Valves
1
84658
84658.23
300mm dia Scour Valves
1
84658
84658.23
350mm dia Sluice Valves
1
117774
117774.73
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces.
-
-
-
100mm dia Sluice Valves
24
3583
149.3
100mm dia Scour Valves
13
1940
149.3
150mm dia Sluice Valves
5
1265
253.05
150mm dia Scour Valves
3
759
253.05
200mm dia Sluice Valves
2
834
417.47
200mm dia Scour Valves
1
417
417.47
250mm dia Sluice Valves
2
1186
593.27
250mm dia Scour Valves
1
593
593.27
300mm dia Sluice Valves
1
844
844.64
300mm dia Scour Valves
1
844
844.64
350mm dia Sluice Valves
1
1426
1426.44
Supply, delivery of CI Specials.
17387
1497368
86.12
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)
-
-
-
100mm dia
48
14592
304
150mm dia
10
4757
475.72
200mm dia
4
2080
520.01
250mm dia
4
2969
742.39
300mm dia
6
4690
781.72
350mm dia
6
6695
1115.87
Construction of RR Masonry in C.M (1: 6) wall valve chamber as per Type design including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc. complete including cost of Plastering, Reinforcement & its fabrication charges.
-
-
-
100mm dia Sluice Valves
24
407147
16964.47
100mm dia Scour Valves
13
368000
28307.74
150mm dia Sluice Valves
5
84822
16964.47
150mm dia Scour Valves
3
88710
29570
200mm dia Sluice Valves
2
38443
19221.63
200mm dia Scour Valves
1
29570
29570
250mm dia Sluice Valves
2
38443
19221.63
250mm dia Scour Valves
1
39103
39103
300mm dia Sluice Valves
1
19221
19221.63
300mm dia Scour Valves
1
39103
39103
350mm dia Sluice Valves
1
37470
37470.42
For Road Restoration
-
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
2456
739796
301.22
Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
1638
5268741
3216.57
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
2784
14190270
5097.08
Earth filling in foundation trenches with excavated earth as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.
3869
1444297
373.3
Carting of Excavated Earth with a lead of 3.00 Kms including Loading and Unloading & Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks excluding loading, unloading and idle hire charges of machinery. (SoR 2017-18, P.No.38, Sl.No.1).
5689
308912
54.3
Bill No : 6 Providing of Distribution system in Zone - VI for a Length of 16403.00mts including Road Restoration.
-
-
-
Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam.
246.75
18390
74.53
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work.
984.23
2240934
2276.84
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
10131
1860254
183.62
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Mechanical Means.
3619
320969
88.69
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) / rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH.
724
1247147
1722.58
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
637
191877
301.22
Manufacture, Supply, & Delivery of HDPE pipes PE 100 PN - 6 Kg/ Cm2 Class 3 conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.)
-
-
-
110 OD HDPE Pipes
10415
3613692
346.97
160 OD HDPE Pipes
3112
2265349
727.94
200 OD HDPE Pipes
1430
1620476
1133.2
250 OD HDPE Pipes
899
1617265
1798.96
Manufacture, Supply and Delivery of Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage with socket spigot ends conforming to i.s.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K - 7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation, taxes & duties.
-
-
-
300mm dia DI K - 7
547
1676385
3064.69
Manufacture As Per Bis 12820/89 With S.B.R. Quality Rubber Confirming To Bis: 5382/85, Supply And Delivery Of Rubber Gaskets Suitable For C.I/ D.I. S/S Pipes Anywhere In A.P. F.O.R. Destination Departmental Stores Including Cost Of Material, Loading, Incidental Handling With Companys Standard Packing, Transportation, Unloading & Stacking including Central Excise Duty, Sales Tax, Octroi And Other Govt. Levies Etc., Comp (Pg No 74/1)
-
-
-
300mm dia DI K - 7
110
22871
207.92
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.
-
-
-
110 OD HDPE Pipes
10415
446178
42.84
160 OD HDPE Pipes
3112
193846
62.29
200 OD HDPE Pipes
1430
128271
89.7
250 OD HDPE Pipes
899
92875
103.31
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
105
45809
436.28
160 OD HDPE Pipes
32
49808
1556.53
200 OD HDPE Pipes
15
43611
2907.41
250 OD HDPE Pipes
9
50860
5651.21
BENDS
-
-
-
110 OD HDPE Pipes
209
93320
446.51
160 OD HDPE Pipes
63
81598
1295.21
200 OD HDPE Pipes
29
73013
2517.71
250 OD HDPE Pipes
18
88122
4895.67
END CAPS
-
-
-
110 OD HDPE Pipes
35
4533
129.52
160 OD HDPE Pipes
11
3524
320.39
200 OD HDPE Pipes
5
2840
568.08
250 OD HDPE Pipes
3
2525
841.89
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
24
9407
391.97
OD 125mm x 140mm
24
13033
543.08
OD 140mm x 160mm
24
18187
757.81
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
7
7340
1048.67
OD 180mm x 200mm
7
9480
1354.29
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
4
6653
1663.32
OD 225mm x 250mm
4
9066
2266.62
250 OD HDPE Pipes
-
-
-
OD 250mm x 280mm
3
9659
3219.85
OD 280mm x 315mm
3
13657
4552.55
Manufacture, Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings Conforming to IS:9523/2000 having dimentions as per table. The Rates mentioned here under are for Fittings, Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) (Ex-Works) including Transportation, Taxes and Duties Etc. Up to 500 x 500mm dia.
136
17422
128.11
Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994)
-
-
-
DI K - 7 Pipes
-
-
-
300mm dia DI K - 7
547
84396
154.29
Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987
-
-
-
DI K - 7 Pipes
-
-
-
300mm dia DI K - 7
116
23021
198.46
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 (Mpa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. (PN 1.6 (Mpa)).
-
-
-
100mm dia Sluice Valves
14
216400
15457.15
100mm dia Scour Valves
7
108200
15457.15
150mm dia Sluice Valves
4
97350
24337.53
150mm dia Scour Valves
3
73012
24337.53
200mm dia Sluice Valves
2
71517
35758.9
200mm dia Scour Valves
1
35758
35758.9
250mm dia Sluice Valves
2
91201
45600.8
250mm dia Scour Valves
1
45600
45600.8
300mm dia Sluice Valves
1
84658
84658.23
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces.
-
-
-
100mm dia Sluice Valves
14
2090
149.3
100mm dia Scour Valves
7
1045
149.3
150mm dia Sluice Valves
4
1012
253.05
150mm dia Scour Valves
3
759
253.05
200mm dia Sluice Valves
2
834
417.47
200mm dia Scour Valves
1
417
417.47
250mm dia Sluice Valves
2
1186
593.27
250mm dia Scour Valves
1
593
593.27
300mm dia Sluice Valves
1
844
844.64
Supply, delivery of CI Specials.
11248.6
968729
86.12
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)
-
-
-
100mm dia
28
8512
304
150mm dia
8
3805
475.72
200mm dia
4
2080
520.01
250mm dia
4
2969
742.39
300mm dia
6
4690
781.72
Construction of RR Masonry in C.M (1: 6) wall valve chamber as per Type design including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc. complete including cost of Plastering, Reinforcement & its fabrication charges.
-
-
-
100mm dia Sluice Valves
14
237502
16964.47
100mm dia Scour Valves
7
198154
28307.74
150mm dia Sluice Valves
4
67857
16964.47
150mm dia Scour Valves
3
88710
29570
200mm dia Sluice Valves
2
38443
19221.63
200mm dia Scour Valves
1
29570
29570
250mm dia Sluice Valves
2
38443
19221.63
250mm dia Scour Valves
1
39103
39103
300mm dia Sluice Valves
1
19221
19221.63
For Road Restoration
-
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
1514
456047
301.22
Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
1009
3245519
3216.57
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
1716
8746589
5097.08
Earth filling in foundation trenches with excavated earth as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.
3112
1161709
373.3
Carting of Excavated Earth with a lead of 3.00 Kms including Loading and Unloading & Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks excluding loading, unloading and idle hire charges of machinery. (SoR 2017-18, P.No.38, Sl.No.1).
3518
191027
54.3
Bill No : 7 Providing for Bulk Water Meters (EMF with HART Facility) for Comprehensive Water Supply Scheme for Gooty Municipality.
-
-
-
Full Bore Electromagnetic Flow meter: Manufacturing, supplying, Installation & commissioning electromagnetic flow meter (EMF) with HART facility for Raw / Pure water with accuracy +/- 0.5% of measured of value & protection as per given specifications for size 100mm - 1000mm including sensor, transmitter surge arrestor, cable duct separate PVC of 25mm dia for 25Mtrs, flowmeter, including the pipe line cutting, leveling & installation of flow meters in the pipe lines with necessary tool tackles, cranes etc. as may be required at site & based on technical specification with certification as per FCRI / MID
-
-
-
600mm dia
3
1543233
514411.04
450mm dia
1
451211
451211.28
350mm dia
2
790891
395445.75
300mm dia
3
1178136
392712.32
250mm dia
6
1906912
317818.8
200mm dia
2
491366
245683.36
Bill No : 8 Providing 15mm dia 8432 Nos New House service connections and transfer of Existing house 5038 Nos Service connections totalling 13470 Nos. HSCs.
-
-
-
Providing House service connections on HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.
b) 1 No. of regulating brass ferrule as per IS 2692
c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
e)MDPE PE80 Blue Pipe of 6 meters length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.
NOTE: The above prices are inclusive of GI stand post with CP bibcock, installation cost, civil works like excavation, Cement Road grove Cutting , Casing Pipe for Drain Crossings and refilling is included in the above prices.
13470
64656000
4800
Cutting open BT road surface (as well as asphalt concrete up to 75 mm thick) including water bound macadam and depositing of excavated materials for sewer line trench work including labour charges and all incidental and operational charges etc., complete duly complying to EMP attached.
1474.8
1099183
745.31
Cutting open cement concrete road surface including pipe line crossing, and depositing of excavated materials for sewer line trench work including labour charges and all incidental and operational charges etc., complete duly complying to EMP attached.
906.2
2063272
2276.84
Collection, Supply and filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work site for pre measurements including cost and convenyance of all material and all labour charges etc. complete
691.2
724412
1048.05
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pave ment, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing) , spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
691.2
3389306
4903.51
Bill No : 9 Providing for Water Meters with SCADA System for Gooty Municipality.
-
-
-
Bill No : 10 Hiring for 2 No. Vehicles for 15 Months on execution period. 2 Nos. x 15 x Rs.35000 per Month.
-
-
-
Bill No : 31 Hiring for 3 Nos. Vehicles for 15 Months on execution period. 3 Nos. x 15 x Rs.35000 per Month.
-
1050000
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements