Public Health And Municipal Engineering Department Tender

Labour charges for sloting of pipes including all labour charges etc complete for 160 mm dia borewells,pipe sloting charges.

Manufacture, supply and delivery of 50mm dia - B Class pipes Nominal Bore GI pipe medium grade properties & weight as per ISI Mark including the cost and conveyance of etc., complete as per SS. (3 Mts long)

Manufacture,Supply, delivery & fixing of Cast iron dail plug heavy duty to suit 200mm dia DN casting pipe including transportation ,Loading ,unloading charges,conveyance charges stacked at site ,labour charges etc and all

Manufacture,Supply, delivery & fixing of clamp set with bolts and nuts washers heavy duty to suit 200mm dia (DN) casting pipe including transportation , Loading , unloading charges, conveyance charges stacked at site , labour charges etc and all

Manufacutre,Supply, delivery & fixing of MS well cap the suit 200mm nominal dia cassing pipe with necessary bolts and nutsincluding transportation , Loading , unloading charges, conveyance charges stacked at site , labour charges etc and all

Supply and Transportation of 5.0 HP 15-20 stage .,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes: Pluga/U-Neel/Sterling / Falcon/ Kumar/ Unnatizen/ Duke/Lada/Ellen/ Suguna/ Unitek/ KSP (Karunaya)/ Anco/ Sabar/Fitwell/Deccan/Karvel/ Sliver

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.a) Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI /Meco / Rishab - 1No b) 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size).Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab-1No. c) Single phase preventor of suitable range Makes: L&T / Minilec / Powertec.-1No. d) TP, 10KA MCB. Makes: Legrand / Schneider / - 1No e) Indication lamps (R-Y-B) with switch control - 1set f) Voltmeter & Ammeter selector switch - 2 Nos g) Supply and delivery of ISI Mark capacitor Makes: L&T / Siemens / Schneider / Epcos. From 15 HP up to 20 HP with Automatic Star Delta Starter of Make : C&S/Crompton / L&T / Siemens/BCH.For on/off motor Upto 7.5 HP with DOL Starter of. Make C&S.Crompton / L&T /KSP/ Siemens/BCH.

Supply of 3 Core 6.00 Sq mm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990.Makes: Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/Goldmedal/GM CSSR S.No 31ELEC-1.5.4

Supply and delivery of 6Sqmm WPSC (Whether proof twin core) ISI alluminium service wire coils of make Finolex/ Goldmedal/ Million/ Payal including cost and conveyance of all charges etc., complete

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. onforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.

Manufacture, Supply, & Delivery of HDPE Pipe 50 mm Dia including transportation to anywhere in A.P, (10.00 kg/Sqcm)

Supply & delivery of 90mm suitable HDPE pipe stainless steel nipples including cost and conveyance and transportation charges

Supply & delivery of 90mm suitable HDPE MS clamps including cost and conveyance and transportation charges

Erection inside bore well submersible motor and pump errection charges

providing shed with GI poles and GI roof 3mm thick for protecting starter panel

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (Page No.484)

Dust Filling of foundation trenches as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Plain Cement concrete PCC (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., (Page No.661) BLD-CSTN-2-5

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Manufacture supply and delivery of 1200mm NP2 Class pipe R.C.C plain ended pipes conforming to BIS 458/1988 at Ex-Factory including transportation with a lead of 10 Km, taxes and duties etc., complete.

Painting to the External walls with 2 coats of Acrylic emulsion paint of Weather Proof Water based exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS for Externals Walls.

Manufacture, Supply, & Delivery of HDPE pipes conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight Length)0D 50mm-6ksc

Manufacture, Supply, & Delivery of HDPE pipes conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight Length)0D 32mm-6ksc

Supplying & fixing Gunmetal (GM) Vertical Check (Nonreturn) Valve as per IS-778 I-class heavy duty - 32 mm NB Size

Supply and delivery of 50mm dia Elbows of heavy quality including cost and conveyance of all charges etc, complete (LR)

Supply and delivery of 50mm dia CI Flange sets including rubber washers bolts and nuts, cost and conveyance of all charges etc., complete (LR)

S & F 32 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent. BMW-F.91

Hoisting and keeping in Position and fixing of 1200mm dia RCC NP2 Pipe with Bottom and Top Cover slabs of suitable size and providing of 3 Nos of 20mm Taps with necessary fittings etc including cost and conveyance of all materials to site, labour charges for finished item of work as directed by the departmental authorities

Engagement of motor operator for operatings pumpsets within the layout-1 person for one layout