Public Health And Municipal Engineering Department Tender

Brick masonry for panel walls 230mm thick in superstructure with CM (1:6) prop: (cement : sand) using fly ash bricks of CLASS - 7.5 - 290 x 225 x 140 mm from approved source . including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, , sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work.

Plain Cement concrete nominal mix m-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine Crushed Graded Metal including cost and conveyance of all materials like cement, sand coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work

Supplying , fitting and placing HYSD / TMT bar reinforcement in VRCC works complete as per drawings and technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded including cost and conveyance of steel , binding wire etc., lifting charges of steel , placing in position, tying with binding wire , all tools etc. complete for finished item of work (BLD-CSTN-4-1& BLD-CSTN-4.2)

Cement plastering 12 mm thick in C.M. (1:5) including cost & conveyance of all materials and labour chrages, other incidental charges and curing etc, complete - BLD - CSTN - 6 -3

Flooring with 25mm thick polished Polished Bethamcherla pure (marble type) white stone minimum 25 mm thick (0.254Mx0.254M) set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms the cost including cost of cement, sand and labour charges and all other incidental charges etc complete as per ss

Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh works, Roof Trusses by using square / rectangular MS hollow section as per IS 4923 & Angles as per SP:6(1) IS Hand book, including cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing, cost & convenience of all materials including wastage to site with all taxes and duties etc complete for finished item of work

Painting to new iron work with one coat of Red oxide primer and two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxid, including cost and conveyance of all materials like Red oxide primer ,Synthetic Enamel Paint to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Provding Flooring with high polished granite 16 to 18 mm mm thick slabs with jet black Lapotra for Semicircular sitting area of Internal radius 1.00m and external radius 1.45m set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials FOR SEMICIRCULAR SEATING MOUNDS

Provding Flooring with high polished granite 16 to 18 mm mm thick slabs Red colour granite for circular sitting area of radius 1.3m and leaving 30cm for gap between tree and pials set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials For Circular Tree Pial

Provding Flooring with high polished granite 16 to 18 mm mm thick slabs Red colour granite for Rectangular sitting area of sides 2.5m and leaving 30cm for gap between tree and pials set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials For rectangular Pial

Providing and fixing Pre painted Steel sliding Window/Door fabricated from roll formed sections made of Galvanized steel colour coated /powder coated (Base Steel as per IS 513 ‘D’ quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for two track Sliding Window should be of 44 x 59mm with a provision for bottom track insert profile of 10x9 mm made of aluminium. Section for Window glass shutter should be of 35x49mm, Section for Window Euro groove should be of 25x24mm made of plastic to accommodate standard accessories, and section for window lap strip should be of 21x4mm made of plastic. Section for Door shutter should be of 35x67mm, Section for Door Euro Groove 25x31mm made of plastic to accommodate standard accessories and size of lap strip should be of 39x41mm. The Window/Door to be panelled with 5mm thick plain float glass. The gaskets are to be made of Ethyl Propylene Diamine Manomer [EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for windows to be made of 10mm thick square rod bars with 152mm pitch for complete item of work . For Door there will be no Safety Grill including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work MAT-01434

Supply of Decorative classic STYLO LED 40W lantern, BIS certified with a luminaire body made of spun aluminium, permanently sealed optical block (IP65) with heat sink and an anti UV PC protector (IK07), fixed onto a hinged spun aluminium frame, control gear compartment (IP65). Suitable for suspended mounting or a galvanised painted mounting bracket for Post Top version. Overall system efficiency of 115lm/W at correlated colour temperature (CCT) of 4000K, CRI 70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 5 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). SUPPLY OF 4 MTR DECORATIVE CAST ALUMINIUM -HDGI STYLO POLE OF 4000MM HEIGHT SHALL BE DULY PRETEATED AND PAINTED IN UV RESISTANT PU PAINT METALIC BLACK TO HANG STYLO FIXTURE, CAST ALUMINIUM DECORAVTIVE PROVIDED AT 700MM HEIGHT FROM BOTTOM OF THE POLE,CASTING SPUN PROVIDED AT THE MIDDLE AND TOP PORTION OF THE POLE FOR AESTHETIC PURPOSE AND THE INNER SECCTION OF THE CAST ALUMINIUM DECORATIVE HDGI POLE DIMENSIONS 100MM*450MM,76MM*3500MM,WITH IN BUILT GEAR BOX 80MM*250MM ,CUTOUT PROVIDED WITH 1 POLE* 6 AMPS LEGRAND MCB,TPN CONNECTORS , 5KVASURGE AND BIS APPROVED DRIVER,DRIVER MAKE:FULLHARM/PHILIPS/MEAN WELL, THE POLE SHALL BE PROVIDED WITH A BASE PLATE 250MM*10MM WITH A 150MM PCD, FOUNDATION SET PROVIDED 16*450MM LENGTH J BOLTS,NUTS AND WASHERS MAKE: JUSTLED

Supply of ISI marked 50mm outer dia (2.10 - 2.30) mm thickness medium grade with IS:9537-part 3 rigid PVC Conduit.

Clearing light Jungle including cost and conveyance of all materials and all labour charges etc complete

Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-13) FOR HEEL AND TOE SLAB

Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-13) WALL

Plain Cement concrete (M 30) Nominal Mix using 20mm metal using concrete mixer the rate including cost of material like Cement , fine aggregate (Sand), coarse aggregate (metal), water charges, labour charges and all other incidental charges including curing etc as per ss(BLD-CSTN-2-11)

Providing and constructing 25 cm thick dry rubble stone pitching with pin headers at 2 per sqm including cost of all materials, labour, hand packing, finishing etc., complete with initial lead upto 50 m and all lifts. ( rubble stones : 0.23 cum/sqm, Stone Chips : 0.0375cum/sqm, Pin Headers 30cm : 2/sqm)

Procurement of Toy shape UPVC Dust bins including Fixing

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - excluding cost of access scaffolding

Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply and fixing of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge BMT-F.20

Flush Pointing with CM (1:3) to RR Masonry the rate including cost material like cement, fine aggegate and water and labour charges and all other incidental charges etc as per SSBLD-CSTN-5-2

Rupees Fourteen Lakhs Forty One Thousand Seven Hundred and Thirteen rupees and Paise Fifty One only