Public Health And Municipal Engineering Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Public Health And Municipal Engineering Department - PHMED Tender
Pipes and Pipe Related Activities
Opening Date15 Jul 2020
Closing Date29 Jul 2020
Tender Amount₹ 1,69,30,257
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
342898Bid Award Id
ViewTender No
27/NLR/Balance Works RBG2/DB/TO/2020Tender Authority
Public Health And Municipal Engineering Department ViewPurchaser Address
-Website
http://http://www.appublichealth.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars and construction joints, plasticizer to attain proper workability as per IS 9103/99 & as approved, curing of concrete slabs for 14- days, curing compound and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. item RBR-CCPV-5 of standard data.
599.76
-
6409.16
... More
Cost towards the drilling of 180mm dia bore well through private agencies with rotary rig 400mm dia to suit up to 180mm dia pipe and providing stone [abbles for filter media and also condecting yield test etc., complete excluding cost of pipe , stone pebbles
85
-
500
... More
supply and delivary of 180 mm dia 6kg/sq.cm pvc pipe for casing including cost and conveyance etc to SS
85
-
722.59
... More
labour charges for slotter tocutting 180mm dia pvc pipe 6kg/cm2 pipe
85
-
350
... More
cost of pebbles for filter media all round the bore well
50
-
75
... More
S&F 50mm nominal bore GI pipe medium grade properties and weight as per IS 1239 ISI mark with GI fittingsincluding the cost of pipe and its fittings and labour charges complete ( S.No:300, BMW-F 89)
80
-
495.36
... More
cost of CI non-returning valves 50 mm dia
1
-
755
... More
supply and transporatation of 3 HP 5-10 stage , star three phase ISI submersible motor pumpset suitable for 6" bore wekk. Makes: kirloskar/crompton/texmo/CRI/KSB/lubi
1
-
30000
... More
Supply and delivery of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA Sheet steel Enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats od Red oxide primer and two coats of Grey Paint, lock and key arrangments two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T/Finolex copper FRLS Cables of suitable size and capacity and cable clamp etc complete for 3 ohase motot pump sets.
a) Volt meter: 0-500 V 96x96mm size - Make: L&T/C&S/ SALZAR/HPL/ AEI/ Meco/Rishab - 1 No
b) 0 to 20 Amps/ 0 to 50 Amps Ammeter (96x96mm Size) - Make: L&T/C&S/ SALZAR/HPL/AEI/Meco/Rishab - 1 No
c) Single Phasepreventot of suitable range - Make: L&T / Minilec / Powertec - 1 No.
d) TP, 10 KA MCB. - Make: Legrand / Schneider - 1 No
e) Indication Lamps (R-Y-B) with switch control - 1 set
f) Voltmeter & Ammeter Selector switch - 2 Nos
g) Supply and delivery of ISI Mark Capacitor - Makes: L&T / Siemens / Schneider / Epos. Upto 7.5 HP with DOL Starter.
1
-
8000
... More
Supply of 10 Sqmm WPTC (Weather Proof Twin Core) ISI Alluminium Wire.
Makes: Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Plaza/ Payal /Sudhakar/ Rajnigandha/ Airson/Orbit/ollvin
90
-
33.85
... More
Supply of 3 Core 4.0 Sqmm Flat Copper cable of ISI for Submersible Motors
confirming to IS:694:1990.
Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster
90
-
125
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH
1038.34
-
211.91
... More
Supply and delivey of sand filling approved quarry including cost, conveyance of all materials and lobour charges,spreading, waterimg etc., complete as per SS .DP No.11
78.75
-
582.24
... More
Plain Cement Concrete (1:4:8) using coarse aggregate 40mm Crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete etc., complete as per SS DP No.44
49
-
3655.76
... More
RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. For footings
33.8
-
8021.84
... More
RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. For columns upto plinth
12.96
-
10126.04
... More
RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for Plinth Beam
40.25
-
10507.55
... More
RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. for columns above ground level
26.82
-
10370
... More
Brick masonry in c.m (1:6) prop.using 2nd class traditional size bricks of locally available size of 23x11x7 cm having a crushing strength not less than 35 kg/cm2 including cost and conveyance of materials to site,seigniorege fee,mixing of cement mortor to specified thickness watering curing,including all scaffolding hire operational charges of machinery,all labour charges and all water lead charges etc. complete for finished item of work
345
-
5505.96
... More
Plastering with CM(1:3) 12 mm thick including cost and conveyance of all materials and labour charges etc complete for finished item of work
3465
-
147.65
... More
Painting to the walls with emulsion paint of standard make and shade approved by the department authorities in 2 coats over primary coat including cost and conveyance of all materials, scaffolding, hire charges of brushes, curing and including cost of all labour charges etc., complete as per SS
3465
-
124.7
... More
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.
12855.01
-
58.99
... More
Collection, supply and spreading of Gravel including cost and conveyance of material to work site, stacking to deptl. gauge and labour charges etc.complete for shoulders as per Table 400- 8 & 9 of MORTH
6737.5
-
343.27
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH FOR COLUMNS
72.58
-
211.91
... More
Conveyance of un-useful excavated earth to a distance of 2 KM for disposal including hire charges of T & P, labour charges etc., complete for finished item of work.
36.29
-
27.4
... More
Supply and delivey of sand filling approved quarry including cost, conveyance of all materials and lobour charges,spreading, waterimg etc., complete as per SS .DP No.11
4.76
-
582.24
... More
Plain Cement Concrete (1:4:8) using coarse aggregate 40mm Crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete etc., complete as per SS DP No.44
4.76
-
3655.76
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for footing raft
8.71
-
5856.99
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for columns up to plinth level
0.95
-
7902.98
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for plinth beam
3.15
-
8342.71
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for column upto roof beam
2.3
-
8146.94
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for roof beam
3.15
-
8184.11
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for roof slab
10.42
-
7053.4
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for lintels
0.18
-
8776.4
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for sunshades
0.23
-
8776.4
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH FOR PLINTH BEAM
5.25
-
211.91
... More
Supply and delivey of sand filling approved quarry including cost, conveyance of all materials and lobour charges,spreading, waterimg etc., complete as per SS .DP No.11
1.05
-
582.24
... More
Plain Cement Concrete (1:4:8) using coarse aggregate 40mm Crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete etc., complete as per SS DP No.44
1.05
-
3655.76
... More
Brick masonry in c.m (1:6) prop.using 2nd class traditional size bricks of locally available size of 23x11x7 cm having a crushing strength not less than 35 kg/cm2 including cost and conveyance of materials to site,seigniorege fee,mixing of cement mortor to specified thickness watering curing,including all scaffolding hire operational charges of machinery,all labour charges and all water lead charges etc. complete for finished item of work for inside building
31.12
-
5505.96
... More
Plastering with CM(1:3) 12 mm thick including cost and conveyance of all materials and labour charges etc complete for finished item of work for building
353.12
-
147.65
... More
Painting to the walls with emulsion paint of standard make and shade approved by the department authorities in 2 coats over primary coat including cost and conveyance of all materials, scaffolding, hire charges of brushes, curing and including cost of all labour charges etc., complete as per SS for building
353.12
-
124.7
... More
Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. For inside building
50
-
1325.25
... More
Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles of 8mm thick glossy finish premium colour length equal to flooring stones, set over base for inside building
4.5
-
1164.48
... More
Brick masonry in c.m (1:6) prop.using 2nd class traditional size bricks of locally available size of 23x11x7 cm having a crushing strength not less than 35 kg/cm2 including cost and conveyance of materials to site,seigniorege fee,mixing of cement mortor to specified thickness watering curing,including all scaffolding hire operational charges of machinery,all labour charges and all water lead charges etc. complete for finished item of work for steps
3.6
-
5505.96
... More
Plastering with CM(1:3) 12 mm thick including cost and conveyance of all materials and labour charges etc complete for finished item of work for steps
3.6
-
147.65
... More
Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. for steps
3.6
-
1325.25
... More
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.
3199.23
-
58.99
... More
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
10.42
-
444.81
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH FOR COLUMNS
72.58
-
211.91
... More
Conveyance of un-useful excavated earth to a distance of 2 KM for disposal including hire charges of T & P, labour charges etc., complete for finished item of work.
36.29
-
27.4
... More
Supply and delivey of sand filling approved quarry including cost, conveyance of all materials and lobour charges,spreading, waterimg etc., complete as per SS .DP No.11
4.76
-
582.24
... More
Plain Cement Concrete (1:4:8) using coarse aggregate 40mm Crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete etc., complete as per SS DP No.44
4.76
-
3655.76
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for footing
8.71
-
5856.99
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for columns up to plinth level
0.63
-
7902.98
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for plinth beam
3.15
-
8342.71
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for column upto roof beam
2.3
-
8146.94
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for roof beam
3.15
-
8184.11
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for roof slab
10.42
-
7053.4
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for lintels
0.18
-
8776.4
... More
Supply and placing of the Design Mix Concrete (M25) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for sunshades
0.23
-
8776.4
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH FOR PLINTH BEAM
5.25
-
211.91
... More
Supply and delivey of sand filling approved quarry including cost, conveyance of all materials and lobour charges,spreading, waterimg etc., complete as per SS .DP No.11
1.05
-
582.24
... More
Plain Cement Concrete (1:4:8) using coarse aggregate 40mm Crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete etc., complete as per SS DP No.44
1.05
-
3655.76
... More
Brick masonry in c.m (1:6) prop.using 2nd class traditional size bricks of locally available size of 23x11x7 cm having a crushing strength not less than 35 kg/cm2 including cost and conveyance of materials to site,seigniorege fee,mixing of cement mortor to specified thickness watering curing,including all scaffolding hire operational charges of machinery,all labour charges and all water lead charges etc. complete for finished item of work for inside building
41.21
-
5505.96
... More
Plastering with CM(1:3) 12 mm thick including cost and conveyance of all materials and labour charges etc complete for finished item of work for building
281.36
-
147.65
... More
Painting to the walls with emulsion paint of standard make and shade approved by the department authorities in 2 coats over primary coat including cost and conveyance of all materials, scaffolding, hire charges of brushes, curing and including cost of all
281.36
-
124.7
... More
Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. For inside building
50
-
1325.25
... More
Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles of 8mm thick glossy finish premium colour length equal to flooring stones, set over base for inside building
54.5
-
1164.48
... More
Brick masonry in c.m (1:6) prop.using 2nd class traditional size bricks of locally available size of 23x11x7 cm having a crushing strength not less than 35 kg/cm2 including cost and conveyance of materials to site,seigniorege fee,mixing of cement mortor to specified thickness watering curing,including all scaffolding hire operational charges of machinery,all labour charges and all water lead charges etc. complete for finished item of work for steps
0.72
-
5505.96
... More
Plastering with CM(1:3) 12 mm thick including cost and conveyance of all materials and labour charges etc complete for finished item of work for steps
3.6
-
147.65
... More
Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. for steps
3.6
-
1325.25
... More
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.
3147.46
-
58.99
... More
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
10.42
-
444.81
... More
Supply and fixing of 25mm Outer Dia. medium (1.80mm thickness) grade with IS:9537 part 3 FRLS regid PVC pipe (ISI MARK) CONCEALED IN ROOF SLABS with all required PVC deep boxes and all accessories including and labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Anchor/ Polyline/ Polycab/Orbit/ AKG
425
-
65.29
... More
Supplying and fixing of 25mm Outer Dia. medium (1.80mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN Wall SLABSwith all required PVC deep boxes and all accessories including and labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Anchor/ Polyline/ Polycab/Orbit/ AKG
165
-
65.29
... More
Wiring with 2 runs of 14/0.3mm (1.00 Sq.mm) PVC insulated F.R flexible copper cable (ISI Mark) insulated 1100V grade as per AS PER IS:694 make of Havells/KEI/Polycab/Bonton/Gold Medal/V-Guard/GM Million/HPL/Finecab/Orbit in the existing pipe with 6-A/10-A 1 way 1 module switch make of Legrand Arteor/Schneider Zencelo/ Honeywell/Blenge plus, Ceiling rose of make Anchore/Gold Medal Oliv`e/Million Zoom and 8 modular horizontal/vertical cover frame make of Legrand Myrius/Cabtree Thames platinum/GM Four Five/Mullion Logus/Gold Medal Curve/CPL/Panasonic vision/Salzer/Precision Makes covering to module box including all labour charges etc., complete for CEILING DOWN LIGHT POINTS, FAN POINTS in Residental Building.
40
-
463.13
... More
Supplying and Run of U/S Circuit Mains by mean run of 2 of 56/0.3mm (4.00Sqmm) FRLS/ HFFR/ ZHFR pvc insulated 1100V grade as per IS.694/190 specification for Copper Wire make Havells/ KEI/Polycab/GM/Gold Medal/Million/HPL/Fine Cab/Vimal/Orbit in the existing metalic /Non metalic conduit pipe for run of mains including all labour charges etc,complete.
352
-
104.16
... More
Supplying and Run of U/S Circuit Mains by mean run of 2 of 36/0.3mm (2.5 Sqmm) FRLS/ HFFR/ ZHFR pvc insulated 1100V grade as per IS.694/190 specification for Copper Wire make Havells/ KEI/Polycab/GM/Gold Medal/Million/HPL/Fine Cab/Vimal/Orbit in the existing metalic/ Non metalic conduit pipe for run of mains including all labour charges etc,complete.
531
-
68.62
... More
Supplying and Run of U/S Circuit Mains by mean run of 1 of 22/0.3mm (1.5 Sqmm) FRLS /HFFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Wire make Havells/ KEI/Polycab/GM/Gold Medal/Million/HPL/Fine Cab/Vimal/Orbit in the existing metalic /Non metalic conduit pipe for run of mains including all labour charges etc., complete.
215
-
25.01
... More
supply and fixing of 6-A/10-A 3/2 Pin 2 Module Modular Socket with shutter of make Legrand Arteor/Schneider Zen celo/Honeywell Blenge plus with 6-A/10-A, 1 Way 1 Module Modular switch of make Legrand Arteor/Schneider Zencelo/ Honeywell/Blenge plus/precision 6-A Switch Control on a common switch board of with earth continuity including wire leads, earth connections along with all labour charges etc., complete
4
-
450.31
... More
Supply and fixing of Batten Holder/Slanting Holder of Anchor/Gold medal olive/Millon/PRECISION make in lieu of ceiling rose of light point complete with all connections and all labour charges etc., complete (for New installation) without bulbs for finished item of work..
1
-
77.06
... More
Supply and Fixing of 16A/6A, 2 in one socket with 16A switch control modular type with MS flush boxes with front cover plate including all labour charges etc., complete. Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam / KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano/ GM-Zenova / Legrand Myrius / Cabtree Thames Platinum / GM- Zicono/ / Million / Logus / Gold Medal Curve / GIFA / CPL/ Panasonic Vision / Salzer S 90 Series/Precision.
4
-
323.16
... More
8 Way TPN Vertical DB with IP -43 (Metal door) protection suitable for 125A, 4 Pole, 25kA MCCB as incomer.
1
-
30058.75
... More
Providing earthling as per IS 3043 with perforated 3 mtr long 40 mm dia B class GI pipe including all accessories like nuts bolts reducer,nipple, wire meshed funnel andCCfinished chamber covered with hinged type with CI cover ,CI frame of size 300 X 300 mm and embodying the pipe complete with alternate layers of salt and coke /charcoal/bentonite powder testing earth resistance as required etc., complete
1
-
10741.25
... More
Supply, Fixing and Transportation of 18W/20W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete. with Fixing of 18W/20W LED luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete.
Makes: Makes: Surya / Pharox / Halonix / HPL / Greenlights / Fortune Art / Capart / GM / Goldmedal / Syska / Cosmo / Trinic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT/ San'an
50
-
1497.25
... More
Supply and Transportation of heavy duty 9 W LED Down lighter, suitable for Recessed mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV, THD10% with high power LED's having efficacy of 120 lumins / watt, CCT: 3000K - 5700K, minimum CRI 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips /Lighting Technologies(LT) / GE / Crompton / Wipro / Bajaj / Havells / VIN b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.
15
-
1004.88
... More
Supply of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200 cubic meter/min but without Regulator. Makes : Crompton / Bajaj Kassels 50 / Usha atom
4
-
2000
... More
Labour charges for fixing of ceiling fan with regulator including transportation, 3 core wire leads etc complete. MAKE: Precision
4
-
164.66
... More
Supply and fixing of Modular type Electronic fan regulator hum free step type socket size in the existing switch board.MAKE: Precision
4
-
164.66
... More
Supplying, laying, jointing and testing of 110mm Dia. (S.16.5) unplasticized Non-pressure Polyvinyl Chloride (PVC-U) Pipes of dark (any shade of Brown) for use in Underground Drainage & Sewerage System conforming to IS.15328/2003) with Solvent Cement Jointing including transportation charges, loading, unloading, excise duty, cess & vat etc., and including cost and conveyance of all materials to site of work and all labour charges, complete as directed by the department.
31.25
-
327.78
... More
Supplying for fixing of 75mm Dia. 3M Single Socket UPVC/SWR pipes of approved make for 6kg/Sq.Cms. of single socket pipe of ISI standard coonfirming to ISI 1352 with air tight joints,fixing with clams and nails etc.,complete for (Vent Shaft) W.C. connection inculding cost and conveyance of all materials to work site labour charges etc for finished item of work inclusive all taxes etc complete.
33.4
-
238.02
... More
Supplying and fixing of premium make of Ashirvad required Flowguard CPVC PIPES of 15.90mm OD Pipe SDR-11 and fittings for Hot & Cold water confirming to IS.15778-2007 including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the dept.
9.45
-
60.22
... More
Supplying and fixing of premium make of Ashirvad required Flowguard CPVC PIPES of 22.20mm OD Pipe SDR-11 and fittings for Hot & Cold water confirming to IS.15778-2007 including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the dept.
30.49
-
96.57
... More
Supplying and fixing of premium make of Ashirvad required Flowguard CPVC PIPES of 41.30mm OD Pipe SDR-11 and fittings for Hot & Cold water confirming to IS.15778-2007 including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the dept.
55.33
-
302.22
... More
Supplying and fixing of premium make of Ashirvad required Flowguard CPVC PIPES of 34.90mm OD Pipe SDR-11 and fittings for Hot & Cold water confirming to IS.15778-2007 including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the dept.
16.75
-
219.28
... More
Supplying and fixing of premium make of Ashirvad required Flowguard CPVC PIPES of 28.60mm OD Pipe SDR-11 and fittings for Hot & Cold water confirming to IS.15778-2007 including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the dept.
11.53
-
139.75
... More
Supplying, laying, jointing and testing of 160mm Dia. (S.16.5) unplasticized Non-pressure Polyvinyl Chloride (PVC-U) Pipes of dark (any shade of Brown) for use in Underground Drainage & Sewerage System conforming to IS.15328/2003) with Solvent Cement Jointing including transportation charges, loading, unloading, excise duty, cess & vat etc., and including cost and conveyance of all materials to site of work and all labour charges, complete as directed by the department.
46.88
-
327.78
... More
Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.
2
-
5000.2
... More
Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Waste Coupling with C.P Bottle trap and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
1
-
2904
... More
Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors.
5
-
1349.75
... More
Supplying and fixing of CP Long body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
2
-
621.47
... More
Supplying and fixing of CP Short body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
2
-
596.48
... More
Supplying and fixing of CP Grating of 100 mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
10
-
61.35
... More
Supplying and fixing of Concealed stop cock 12.7mm . Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
1
-
577.16
... More
Supplying and fixing of 32mm N.B. size Gunmetal (GM) Ball Valve with ss ball and ss spindle Class-I of Indian make heavy type including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work as directed by the department.
1
-
1654.84
... More
Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
2000
-
5.96
... More
Supplying and fixing of 110mm Dia. UPVC/SWR 87.5 Degree Plain Bend of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
9.25
-
79.53
... More
Supplying and fixing of 110mm Dia. UPVC/SWR 87.5 Degree DOOR Bend of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
2.5
-
103.39
... More
Supplying & fixing of 110mm Dia. uPVC/SWR SINGLE TEE of approved including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
6
-
103.39
... More
Supplying & fixing of 110X75mm Dia. uPVC/SWR Reducer of approved including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
2
-
54.54
... More
Supplying & fixing of 75mm Dia. uPVC/SWR SINGLE TEE of approved including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
8
-
56.81
... More
Supplying and fixing of 75mm Dia. UPVC/SWR PLAIN BEND 87.5 Degree of approved make including cost and conveyance of all materials to work site and all jointing materials,labour charges etc.,complete for finished item of work.
10
-
47.72
... More
Supplying and fixing of 110mm Dia. UPVC/SWR coupler of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
10
-
54.54
... More
Supplying and fixing of 75mm Dia. UPVC/SWR coupler of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
15
-
34.08
... More
Supplying and fixing of 75mm Dia. UPVC/SWR 87.5 Degree Door Bend of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
3
-
64.76
... More
Supplying and fixing of 75mm Dia. UPVC/SW 45 Degree R BEND of approved make including cost and conveyance of all materials to work site and all jointing materials,labour charges etc.,complete for finished item of work.
2
-
37.49
... More
Supplying and fixing of 150mm x 100mm SWG Gully Trap1st class of approved ISI make confirming to ISI 651 & 4127 with C.I. gratings of 6" x 6" and constructing intermediate brick masonry chamber of size 20"x14"x12" in CM (1:6) prop. over a bed of CC (1:5:10) prop. 3" thick and plastering 12mm thick in CM (1:3) prop. both inside, outside & top with fine rendering with neat cement and fitted with 12" x 9" C.I. frame and hinged cover etc., complete for finished item of work.
8
-
551.03
... More
Manufracture, supply and delivery of 450 mm dia RCC Plain ended pipes NP-2 Class confirming to BIS 458/2003 including transporation, taxes and duties etc., to site of work
5
-
711.23
... More
Supplying and fixing of 4" (101.6 mm ) Nahany Trap without Jali for UPVC/SWR pipe fittings of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
10
-
94.3
... More
Supply ,Laying & Jointing of Unplasticised PVCs Pipes of 50mm Dia with a Pressure of 6 kg/CM2 for potablewater supplies conforming to IS : 4985/2000 (3rd revision) as per specification including transportation charges, loading, unloading, excise duty, cess & vat etc., and including cost and conveyance of all materials to site of work and all labour charges, complete as directed by the department.
5
-
157.36
... More
TOTAL ECV
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements