Public Health And Municipal Engineering Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Public Health And Municipal Engineering Department - PHMED Tender
Civil And Construction
Civil Works Others
Building Construction
Opening Date1 Mar 2024
Closing Date20 Mar 2024
Tender Amount₹ 5,84,06,908
Costs
EMD
₹ 5,84,069Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
726542Tender No
2371/AMRUT-2.0/2023-24/TS-T3, Dt.26.02.2024Tender Authority
Public Health And Municipal Engineering Department ViewPurchaser Address
-Website
http://http://www.appublichealth.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Slotting charges for 175 mm dia PVC blue casing pipe per RM including all labor charges etc., as Per directed by departmental authorities.
400
167016
417.54
Supply and spreading of pebbled gravel, including Cost and conveyance of material charges etc., complete As per the directions of departmental authorities.
152
836000
5500
Supply and erecting, ISI mark submersible 10 HP,3 Phase,12-16 stages 5star rated submersible motor pumpset suitable confirming to IS 8034 and motor confirming to IS 9283 and Pump shall be suitable for various delivery head with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength. Makes: Kirloskar / Crompton / Texmo / CRI / SB / Lubi / PSG / Aryen Varsha / KSB / as Per directed by departmental authorities MAT-03662
5
253000
50600
Supply and erecting, ISI mark submersible 5.00HP, 12-16 Stage, 3 Phase pumpset suitable for 175 mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V , 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength.
Makes: Kirloskar / Crompton / Texmo / CRI / SB / Lubi / PSG / Aryen Varsha / KSB / as Per directed by departmental authorities
5
211750
42350
Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.
Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No
0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size).
above 7.5 HP to 12.5 HP with Star- Delta Starter. Make C&S.Crompton / L&T /KSP/ Siemens/BCH.
Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1No.Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No
Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos
Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells 5.4.17 - Upto 7.5 HP with DOL Starter
5
48400
9680
Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.
Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No
0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size).
above 7.5 HP to 12.5 HP with Star- Delta Starter. Make C&S.Crompton / L&T /KSP/ Siemens/BCH.
Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1No.Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No
Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos
Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells 5.4.17 -above 7.5 HP to 12.5 HP with Star- Delta Starter
5
84700
16940
Flushing of bore well of dia 165/150 mm with power rig at an average pressure of 150 PSI, including crew charges, completely done to the satisfaction of the department including detachable of all accessories and refix all materials as per the original condition including all labour charges, but excluding cost of materials& excluding taxes etc,, complete,
10
113331
11333.1
Manufacture, supply, delivery and fixing of clamp-set With bolts, nuts and washers heavy-duty to suit 200 mm Dia(DN) casting including transportation, loading, Un-loading at site conveyance and labor charges etc., as Per directed by departmental authorities
10
2204
220.41
Manufacture, supply, delivery and fixing of MS well cap Suit to 200 mm nominal dia casing pipe with necessary Bolts and nuts jincluding transportation, loading Un-loading at site conveyance and labor charges etc.,as Per directed by departmental authorities
10
3579
357.88
Supply and delivery of 3 Core 4.00 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990 including cost, conveyance and transportation and as Per directed by departmental authorities.Sor 2023-24 ELEC-1.6.3 (C) Page no.23
Makes: Makes: Finolex / RR Kabel/ Polycab / Havells Goldmedal
1000
148000
148
Manufacture, Supply, & Delivery of 90mm dia PN 10 Kg/Sqcm HDPE pipes conforming to IS 4984 -2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight Length) etc..,complete as Per directed by departmental authorities
1100
410080
372.8
Supply and fixing of suitable Stainless steel nipples to Delivery pipe including cost, conveyance and Transportation charges. as directed by departmental authorities
10
6200
620
Supply and fixing of suitable Stainless steel nipples to Delivery pipe including cost, conveyance and Transportation charges. as directed by departmental authorities
10
8000
800
Supply and delivery of 100 Amps fuse units including all charges etc..,complete as Per directed by departmental authorities
30
19800
660
Supply, Delivery and Fixing of Syntex Meter Box including all necessary items like fuses Meter Base plate and Other necessary conneting wires including all labour charges etc..,complete and incedental responsibility bearing by agency for Execution of the work as per directed by the departmental authority
10
15000
1500
Supply and Run of 1 of 10 Sq.mm WPTC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete.
500
23990
47.98
Construction of 300 KL Clear water sump at Somalingapalem to supply water to Jaganna Layouts
-
-
-
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts upto 3.00m depth - machinery
34.32
4362
127.1
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts upto 3.00m depth - manual
14.71
4006
272.36
Collection, supply, and filling of Crusher Stone Dust from approved quary to work site and stacking at work site to Dept. gauge for premeasurements including cost and conveyance of all materials, labour charges etc., complete as per standard specifications. Clause 305.39 MORD & 304 MORTH etc., complete and as directed by Engineer in Charge of work
12.26
12307
1003.82
Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete.
12.26
66183
5398.3
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Slab
25.64
282682
11025.03
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Side Walls
44.7
640837
14336.4
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Roof Beams
2.63
32791
12468.21
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Roof Slab 150mm thick
13.78
156897
11385.83
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work.
8675
793069
91.42
Providing impervious coat to surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
154.55
92197
596.55
Plastering with CM (1:3), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work and as per Technical Specification
94.39
42886
454.35
Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of approved make and shade over a base coat of approved cement primer exterior grade II making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for External walls
223.46
62207
278.38
Centrifugally cast (spun) Ductile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and excluding all Taxes.
1471
220547
149.93
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.-150 mm Dia PN 1.6 Mpa
1
24199
24198.65
Lowering, keeping in position and fixing of DI /C.I. sluice valves (with cap / with hand wheel & reflex valves) including Labour Charges and incidental charges and as per Technical Specification - 150 mm Dia PN 1.6 Mpa
1
373
372.77
SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE. (1/2" TO 1")
75
10396
138.61
SUPPLY AND DELIVERY OF RUBBER PACKING INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE.
75
8692
115.89
Provision for Pre Cast RCC inside ladder as per the standard specifications
1
10000
10000
Provision for Pre Cast RCC outside ladder as per the standard specifications
1
7000
7000
Supply and fixing of for RCC pre-cast fly proof ventilators with central Phenial necessary copper wire mesh, etc., complete as per standard specification
1
20000
20000
Construction of the Pump house of size 6.0 Mts X 5.0 Mts at 300KL clear water sump at Somalingapalem
-
-
-
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts upto 3.00m depth - manual
29.06
3694
127.1
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts upto 3.00m depth - manual
12.46
3394
272.36
Collection, supply, and filling of Sand from approved quary to work site and stacking at work site to Dept. gauge for premeasurements including cost and conveyance of all materials, labour charges etc., complete as per standard specifications. Clause 305.39 MORD & 304 MORTH etc., complete and as directed by Engineer in Charge of work
4.01
3724
928.77
Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete.
8.33
44968
5398.3
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Footings
2.7
29768
11025.03
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Pedestal
1.66
19130
11523.8
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Column
2.09
28806
13782.72
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Plinth Beam
1.99
26688
13410.95
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Lintel Beams
0.37
5170
13972.46
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Roof Beams
2.55
31794
12468.21
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Sun Shades of Size 75 mm thick at one end 50mm other end and 600mm width
0.26
3996
15369.94
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - For Roof Slab 150 mm thick
42.78
73063
1707.87
Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 200 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete with a compresive streangth not lessthan 50 kg/sqm for walls
13.24
100578
7596.51
Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete for finished item of work as per SS 509
15.75
129030
8192.4
Plastering with CM (1:4), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work.
185.78
76588
412.25
Providing impervious coat to surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
42.78
25520
596.55
Plastering with CM (1:3), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work and as per Technical Specification
30
13631
454.35
Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges etc., complete as per SS 912 for finished item of work and as per Technical Specification for Interior walls
104.58
21184
202.56
Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of approved make and shade over a base coat of approved cement primer exterior grade II making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for External walls
50.6
14086
278.38
white colour casement/Casementcumfixed glazed door comprising of uPVCmulti-chambered frame, sashand mullion (where ever required) extrudedprofiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel sectionmade from roll formingprocess ofrequired length (shape & size accordingto Upvc profile),uPVC extruded glazingbeads of appropriatedimension,EPDMgasket,zinc alloy(white powder coated) 3D hinges and
one handle oneach sideof panels along with zinc plated mild steelmulti point locking having transmissiongear, cylinderwith keeps and one sidekey, G.Ifasteners100 x 8 mm size forfixing frame to finished wall and necessarystainlesssteel screws, etc.Profile of frame & sash shall be mitredcut andfusionwelded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holesfor fixing hardware's and drainage ofwater etc.After fixing frame the gapbetween frame and adjacent finishedwall shallbe filled with weather proof siliconsealent over backer rod of requiredsizeand of approved quality, allcomplete as per approved drawing & directionof Engineer-in-Chargeinclusive of cost of Single / doubleglass panes and silicon sealent .
Note: For uPVC frame, sash andmullion extruded profiles minus5%tolerance in dimension i.e. in depth & width of profile shall beacceptable.Variation in profile dimension in higher side shall beacceptedbut no extra payment on this account shall be made.
Casement door with top hung ventilatorwith 3D and S.S. frictionhinges (400 x
19 x 1.9 mm) made of (big series) frame67 x 64 mm, sash 67 x 110 mm & mullion
67 x 80 mm all having wall thickness of2.3 ±. 0.2 mm and single glazing bead /
double glazing bead of appropriatedimension.(Area of doorupto2.50 sqm) .MAT-05438 BMT-N.84.B
2.52
25510
10123
Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi- chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
3.6
27396
7609.93
Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for chainlink mesh works, Roof Trusses by using square / rectangular MS section as per IS 4923 including cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing, cost & convenience of all materials including wastage to site with all taxes and duties etc complete for finished item of work
108
12990
120.28
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work.
1803.27
164855
91.42
Supply and erection of Horizontal Split Casing pump sets and Motars for pumping clear water from proposed 300KL Clear water sump at Somalingapalem to 350KL GLSR at Sesukonda
-
-
-
Supply, delivery and erection of electrically driven horizontal split casing pump sets foot mounted heavy duty ball bearing type C.F clear water pump sets. The pump should be fitted with S.S / Bronze impiller, S.S shaft as per IS specification with casing of heavy duty and gland packing capable of discharging following discharge and head operated at required RPM coupled for operation on combined variation of +/-10% AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete with suction, delivery arrengements,DI valves,DI and MS specials,gauges,panel board for motors, capacitors, startes, earthening arrengements, change over switch,bed blocks under pumps,valves,suitable cables etc complete for finished item of work. -Pump sets with a discharge of 15 lps (7.50Lps -2Nos) against head of 92 m
3
735000
245000
Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicating lamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters of make L&T/Siemens/C&S/Telemechanics / Kilburn.")
a) Volt Meter with selector switch b) Ammeter with selector switch
c) Power factor indicator meter with switch controls.
d) 3 Ph energy meter
f) Hour meters
g) Suitable capacitors h) Suitable fuses
i) Incoming and out going suitable range MCCB'S
j) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc. - for all 3 Pump sets
3
67155
22385
Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. (PH ITEMS table 30(1)- Pg 79) - 100 mm dia
3
68966
22988.77
Manufacture, Supply and delivery of DI D/F Tilting disc Swing Check Valves Slanted seated with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Shafts of stainless steel, shaft bearing of zinc free bronze and Integral body seat face & disc face with nickel-chromium overlay welding and micro finished. All the inside and outside of the body is to be coated with double coating of food grade epoxy liquid lacquer (EP-F) with minimum thickness of 150 microns, color: RAL 5005 Blue face to face dimensions according to EN 558-1/14/DIN 3202-F4, Flange dimensions according to EN1092-2/IS 1538 - 100 mm dia
3
115863
38621.04
Manufacture,supply and errection of MS pipes and specials for suction and delivery connections of the pump house including all costs and all fabrication charges etc., complete.
800
112448
140.56
Providing 150 mm DI K9 Pumping Main from proposed 300KL sump to proposed 350 KL GLSR at Sesukonda
-
-
-
Earthwork excavation In ordinary soils up to 3.00 Mts depth below GL by Mechanical means: Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Lines by mechanical means.
4512.9
573590
127.1
Excavation in ordinary soils up to 3.00 Mts depth below GL by Manual means: Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Lines by manual means.
1289.38
351176
272.36
Earthwork excavation hard rock and rock boulders for for Pipe Line as per drawing and technical specifications in inhabited areas such as urban areas without blasting and as per specification, drawing and as directed by departmental officers taking all precautionary measures in the restricted areas with the initial lead of 50mts and intial lift of 3m taking all precautionary measures in the restricted areas including all incidental and operational charges etc., complete.10 % of Earthwork
644.69
647656
1004.6
Supply and delivery of centrifugally cast (spun) Ductile Iron K-9 pressure pipes for water with socket spigot ends conforming to IS: 8329/2000 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation to site of work labour charges for loading & Unloading and stacking as per standards and all incidental charges and also taxes & duties but excluding GST and as per Technical Specification -150 mm dia Ductile Iron K-9
7850
19233364
2450.11
Supply and delivery of centrifugally cast (spun) Ductile Iron K-9 pressure pipes for water with socket spigot ends conforming to IS: 8329/2000 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation to site of work labour charges for loading & Unloading and stacking as per standards and all incidental charges and also taxes & duties but excluding GST and as per Technical Specification -100 mm dia Ductile Iron K-9
1472
2411401
1638.18
Lowering D.I. Pipe (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries etc., complete and as per Technical Specification -150mm dia Ductile Iron K-9
7850
710347
90.49
Lowering D.I. Pipe (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries etc., complete and as per Technical Specification -100 mm dia Ductile Iron K-9
1472
81784
55.56
Jointing D.I. pipes and fittings with rubber gasket (push-on-joint) but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete and as per Technical Specification - 150mm dia Ductile Iron K-9
1432
434684
303.55
Jointing D.I. pipes and fittings with rubber gasket (push-on-joint) but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete and as per Technical Specification - 100 mm dia Ductile Iron K-9
273
63579
232.89
Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings conforming to IS: 9523/2000 Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) including Transportation, Taxes and Duties but excluding GST and as per Technical Specification
2500
374825
149.93
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.- 150 mm dia PN 1.6
20
483973
24198.65
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.- 100 mm dia PN 1.6 Sluice Valves for scour
5
76845
15368.95
Lowering, keeping in position and fixing DI sluice valves (with cap / with hand wheel & reflex valves) including all labor charges and incidental charges and as per Technical Specification - 150 mm dia PN 1.6
20
7455
372.77
Lowering, keeping in position and fixing DI sluice valves (with cap / with hand wheel & reflex valves) including all labor charges and incidental charges and as per Technical Specification - 100 mm dia PN 1.6 Sluice Valves for scour
5
1100
219.94
Supply & Delivery of Tamper Proof 80 mm dia PN 1.6 DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportation
15
411001
27400.07
Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete as per the Technical Specification (80 mm Dia)
15
5317
354.48
Construction of VRCC valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed, M-20 - 0.2 mts thick sidewall and cover slab thickness of 0.15 VRCC M30 grade ,Manhole Cover and encapsulated Steps including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of reinforcement & its fabrication charges and as per Technical Specification
20
770755
38537.77
RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,
18.6
187728
10092.93
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work.
1116
102025
91.42
SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE. (1/2" TO 1")
200
27722
138.61
SUPPLY AND DELIVERY OF RUBBER PACKING INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE.
100
11589
115.89
Construction of 350 KL GLSR on Sesukonda to supply water to Jaganna Layouts
-
-
-
Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH by Mechanical Means -For approach road formation
135
135621
1004.6
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts upto 3.00m depth - machinery
133.05
16911
127.1
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts upto 3.00m depth - manual
57.02
15530
272.36
CCollection, supply, and filling of Sand from approved quary to work site and stacking at work site to Dept. gauge for premeasurements including cost and conveyance of all materials, labour charges etc., complete as per standard specifications. Clause 305.39 MORD & 304 MORTH etc., complete and as directed by Engineer in Charge of work
14.25
13235
928.77
Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete.
14.25
76926
5398.3
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - Floor Slab
29.74
327884
11025.03
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - Side Walls
44.74
641411
14336.4
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - Roof Beams
2.86
35659
12468.21
Supply and placing of the M 30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work - Roof Slab 150 mm thick
15.78
179668
11385.83
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work.
9312
851303
91.42
Providing impervious coat to surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
179.35
106991
596.55
Plastering with CM (1:3), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work and as per Technical Specification
108.78
49424
454.35
Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of approved make and shade over a base coat of approved cement primer exterior grade II making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for External walls
248.59
69202
278.38
Centrifugally cast (spun) Ductile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and excluding all Taxes.
2066
309755
149.93
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation - 150 mm Dia PN 1.6 Mpa
2
48397
24198.65
Lowering, keeping in position and fixing of DI /C.I. sluice valves (with cap / with hand wheel & reflex valves) including Labour Charges and incidental charges and as per Technical Specification - 150 mm Dia PN 1.6 Mpa
2
746
372.77
SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE. (1/2" TO 1")
100
13861
138.61
SUPPLY AND DELIVERY OF RUBBER PACKING INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE.
100
11589
115.89
Provision for Pre Cast RCC inside ladder as per the standard specifications
1
10000
10000
Provision for Pre Cast RCC outside ladder as per the standard specifications
1
7000
7000
Supply and fixing of for RCC pre-cast fly proof ventilators with central Phenial necessary copper wire mesh, etc., complete as per standard specification
1
20000
20000
Construction of Various Service reservours in Housing Layouts
-
-
-
Construction of 30 KL capacity Service Reservoir with a staging of 15 m with VRCC M30 mix including fixtures mentioned below at TulasiNagar.
NOTE: -1). All concrete members shall be designed with M30 grade design mix.
2) For intermediate ranges proportional rates may be adopted
3) The above rates are arrived with base rate of Cement Rs.4220/- per MT (as per G.o.Rt.No.2029 Water Resources (Reforms) Dept. Dt:06-10-2022) & Steel Rs 63000/- per MT(Fe 500) (BoCE rates for the month of February-2023).
4)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 15 T/Sqm.
a) For every decrease of 2.50 T/Sqm of SBC, the rate shall be increased by 2.50% on basic rate.
b) For every increase of 2.5 T/Sqm of SBC, the rate shall be decreased by 1.0% on basic rate up to 20 T/Sqm
c) For SBC 10T/Sqm to 7.5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 10% on basic rate.
d) For SBC 7.5 T/Sqm to 5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 15% on basic rate
e) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition.
5) For every Meter of staging less than 10 m, the rate shall be reduced by Rs.0.05 paisa per liter per every Meter of difference in staging
6) For every Meter of staging above 10 m , the rate shall be increase by Rs.0.10 paisa per liter per every Meter of additional in staging
7) The above rates shall be increased / decreased due to increase / decrease in the cost of cement by Basic Rate x {(Rc-4220)/4220} x 0.07
Rc = Rate of cement (Rs per Mt) at the time of preparation of estimate.
30000
1485300
49.51
8)The above rates shall be increased / decreased due to increase / decrease in the cost of steel by Basic Rate x { (Rs-63000)/63000 x0.2} Rs = Rate of steel (Rs per Mt) at the time of preparation of estimate.
9) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.
10) The above rates shall be adopted for estimate purposes for construction of ELSR for a finished work including 2 coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings.
11) The above rates are applicable for wind pressures up to 250 kg / Sq m .For decrease in wind pressure the rate has to be decreased by 5% per every 100kg/Sqm. If the ELSR / OHSR are to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs
12) (a)For tribal/Agency / Rural area, the above rates as arrived up to shall be increased by 10%.
(b) An additional increase of 7.50% shall be allowed for OHSRs/ELSRs located in agency areas over the above rates for RWS Department works.
13) If the ELSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the design & difference to be paid extra.
14) If the ELSR is to be designed for seismic forces a) The above rates are applied up to Zone-II earth quake. b) For Zone-III earth quake the above rates are to be increased by 15 %.
15) Fixtures include :
a) RCC or Aluminum ladder inside 0.60 m wide.
-
-
-
b) Spiral staircase on the outside shall be provided up to 200KL. Above 200KL capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing up to 1.0 height.
c) Lightening arrestor, including conductor and earthling etc.
d) RCC ventilators with copper or stainless steel fly proof mesh.
e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2 Nos.
f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No.
g) The ladder shall be with M.S ladder and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only.
h) Minimum staging for all ELSR/OHSR shall be 10.0mts.
i) The increase in staging shall be at 1.0mt interval
j) The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts.
k). The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with M.S collapsible gate up to 1st brace level from ground level to prevent unauthorized entry.
l). D.I swan neck ventilators shall be provided in top dome and slab.
m). The above rates are exclusive of all inlet, out let connection and valves. All valves near inlet, out let and for scour of ELSRs shall be D.I valves of heavy duty confirming to the specification of SoR item No.28
-
-
-
Construction of 20 KL capacity Service Reservoir with a staging of 15 m with VRCC M30 mix including fixtures mentioned below at Ramarayudupalem.
NOTE: -1). All concrete members shall be designed with M30 grade design mix.
2) For intermediate ranges proportional rates may be adopted
3) The above rates are arrived with base rate of Cement Rs.4220/- per MT (as per G.o.Rt.No.2029 Water Resources (Reforms) Dept. Dt:06-10-2022) & Steel Rs 63000/- per MT(Fe 500) (BoCE rates for the month of February-2023).
4)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 15 T/Sqm.
a) For every decrease of 2.50 T/Sqm of SBC, the rate shall be increased by 2.50% on basic rate.
b) For every increase of 2.5 T/Sqm of SBC, the rate shall be decreased by 1.0% on basic rate up to 20 T/Sqm
c) For SBC 10T/Sqm to 7.5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 10% on basic rate.
d) For SBC 7.5 T/Sqm to 5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 15% on basic rate
e) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition.
5) For every Meter of staging less than 10 m, the rate shall be reduced by Rs.0.05 paisa per liter per every Meter of difference in staging
6) For every Meter of staging above 10 m , the rate shall be increase by Rs.0.10 paisa per liter per every Meter of additional in staging
7) The above rates shall be increased / decreased due to increase / decrease in the cost of cement by Basic Rate x {(Rc-4220)/4220} x 0.07
Rc = Rate of cement (Rs per Mt) at the time of preparation of estimate.
20000
1071000
53.55
8)The above rates shall be increased / decreased due to increase / decrease in the cost of steel by Basic Rate x { (Rs-63000)/63000 x0.2} Rs = Rate of steel (Rs per Mt) at the time of preparation of estimate.
9) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.
10) The above rates shall be adopted for estimate purposes for construction of ELSR for a finished work including 2 coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings.
11) The above rates are applicable for wind pressures up to 250 kg / Sq m .For decrease in wind pressure the rate has to be decreased by 5% per every 100kg/Sqm. If the ELSR / OHSR are to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs
12) (a)For tribal/Agency / Rural area, the above rates as arrived up to shall be increased by 10%.
(b) An additional increase of 7.50% shall be allowed for OHSRs/ELSRs located in agency areas over the above rates for RWS Department works.
13) If the ELSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the design & difference to be paid extra.
14) If the ELSR is to be designed for seismic forces a) The above rates are applied up to Zone-II earth quake. b) For Zone-III earth quake the above rates are to be increased by 15 %.
15) Fixtures include :
a) RCC or Aluminum ladder inside 0.60 m wide.
-
-
-
b) Spiral staircase on the outside shall be provided up to 200KL. Above 200KL capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing up to 1.0 height.
c) Lightening arrestor, including conductor and earthling etc.
d) RCC ventilators with copper or stainless steel fly proof mesh.
e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2 Nos.
f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No.
g) The ladder shall be with M.S ladder and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only.
h) Minimum staging for all ELSR/OHSR shall be 10.0mts.
i) The increase in staging shall be at 1.0mt interval
j) The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts.
k). The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with M.S collapsible gate up to 1st brace level from ground level to prevent unauthorized entry.
l). D.I swan neck ventilators shall be provided in top dome and slab.
m). The above rates are exclusive of all inlet, out let connection and valves. All valves near inlet, out let and for scour of ELSRs shall be D.I valves of heavy duty confirming to the specification of SoR item No.28
-
-
-
Construction of 150KL capacity Service Reservoir with a staging of 15 m with VRCC M30 mix including fixtures mentioned below at Kokkirapalli.
NOTE: -1). All concrete members shall be designed with M30 grade design mix.
2) For intermediate ranges proportional rates may be adopted
3) The above rates are arrived with base rate of Cement Rs.4220/- per MT (as per G.o.Rt.No.2029 Water Resources (Reforms) Dept. Dt:06-10-2022) & Steel Rs 63000/- per MT(Fe 500) (BoCE rates for the month of February-2023).
4)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 15 T/Sqm.
a) For every decrease of 2.50 T/Sqm of SBC, the rate shall be increased by 2.50% on basic rate.
b) For every increase of 2.5 T/Sqm of SBC, the rate shall be decreased by 1.0% on basic rate up to 20 T/Sqm
c) For SBC 10T/Sqm to 7.5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 10% on basic rate.
d) For SBC 7.5 T/Sqm to 5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 15% on basic rate
e) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition.
5) For every Meter of staging less than 10 m, the rate shall be reduced by Rs.0.05 paisa per liter per every Meter of difference in staging
6) For every Meter of staging above 10 m , the rate shall be increase by Rs.0.10 paisa per liter per every Meter of additional in staging
7) The above rates shall be increased / decreased due to increase / decrease in the cost of cement by Basic Rate x {(Rc-4220)/4220} x 0.07
Rc = Rate of cement (Rs per Mt) at the time of preparation of estimate.
150000
4417500
29.45
8)The above rates shall be increased / decreased due to increase / decrease in the cost of steel by Basic Rate x { (Rs-63000)/63000 x0.2} Rs = Rate of steel (Rs per Mt) at the time of preparation of estimate.
9) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.
10) The above rates shall be adopted for estimate purposes for construction of ELSR for a finished work including 2 coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings.
11) The above rates are applicable for wind pressures up to 250 kg / Sq m .For decrease in wind pressure the rate has to be decreased by 5% per every 100kg/Sqm. If the ELSR / OHSR are to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs
12) (a)For tribal/Agency / Rural area, the above rates as arrived up to shall be increased by 10%.
(b) An additional increase of 7.50% shall be allowed for OHSRs/ELSRs located in agency areas over the above rates for RWS Department works.
13) If the ELSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the design & difference to be paid extra.
14) If the ELSR is to be designed for seismic forces a) The above rates are applied up to Zone-II earth quake. b) For Zone-III earth quake the above rates are to be increased by 15 %.
15) Fixtures include :
a) RCC or Aluminum ladder inside 0.60 m wide.
-
-
-
b) Spiral staircase on the outside shall be provided up to 200KL. Above 200KL capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing up to 1.0 height.
c) Lightening arrestor, including conductor and earthling etc.
d) RCC ventilators with copper or stainless steel fly proof mesh.
e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2 Nos.
f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No.
g) The ladder shall be with M.S ladder and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only.
h) Minimum staging for all ELSR/OHSR shall be 10.0mts.
i) The increase in staging shall be at 1.0mt interval
j) The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts.
k). The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with M.S collapsible gate up to 1st brace level from ground level to prevent unauthorized entry.
l). D.I swan neck ventilators shall be provided in top dome and slab.
m). The above rates are exclusive of all inlet, out let connection and valves. All valves near inlet, out let and for scour of ELSRs shall be D.I valves of heavy duty confirming to the specification of SoR item No.28
-
-
-
Providing of Distribution Network in Jagananna Colony Layout
-
-
-
Excavation in ordinary soils up to 3.00 Mts depth below GL by Mechanical means: Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Lines by mechanical means.
4179.83
531256
127.1
Excavation in ordinary soils up to 3.00 Mts depth below GL by Manual means: Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Lines by manual means.
1492.8
406579
272.36
Earthwork excavation hard rock and rock boulders for for Pipe Line as per drawing and technical specifications in inhabited areas such as urban areas without blasting and as per specification, drawing and as directed by departmental officers taking all precautionary measures in the restricted areas with the initial lead of 50mts and intial lift of 3m taking all precautionary measures in the restricted areas including all incidental and operational charges etc., complete.
298.56
299933
1004.6
Cutting open C.C. road surface with concrete saw cutter and removal with Breaker including labour charges for cutting, incidental charges, overheads & contractors profit etc., complete as directed by the departmental officer in charge of the work.
45
168258
3739.07
Supply, & delivery of HDPE pipes conforming to IS 4984 - 1995 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete. ( Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.) PE-100 PN 6.0 - 110 mm Pipe
6440
2410492
374.3
Supply, & delivery of HDPE pipes conforming to IS 4984 - 1995 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete. ( Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.) PE-100 PN 6.0 - 160 mm Pipe
3063
2404884
785.14
Supply, & delivery of HDPE pipes conforming to IS 4984 - 1995 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete. ( Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.) PE-100 PN 6.0 - 200 mm Pipe
1007
1231692
1223.13
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure including disinfection. -PE-100 PN 6.0 - 110 mm Pipe
6440
389942
60.55
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure including disinfection. -PE-100 PN 6.0 - 160 mm Pipe
3063
270248
88.23
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure including disinfection. -PE-100 PN 6.0 - 200 mm Pipe
1007
128624
127.73
Supply, & Delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in A.P. including excise duty, sale tax and specials etc., complete
-
-
-
Pipe Long end Neck
-
-
-
End Caps
-
-
-
OD 110
64
11125
173.83
OD 160
16
6908
431.74
OD 200
5
3829
765.77
Reducers
-
-
-
OD 110 x 125 mm
32
16906
528.31
OD 125 x 140 mm
16
11707
731.68
OD 140 x 160mm
16
16342
1021.4
OD 160 x 180mm
10
14122
1412.23
OD 180 x 200mm
5
9123
1824.66
OD 200 x 225mm
5
11202
2240.49
OD 225 x 250 mm
5
15270
3053.97
Tees
-
-
-
OD 110
43
25209
586.25
OD 160
15
31460
2097.33
OD 200
5
19582
3916.31
Bends
-
-
-
OD 110
43
25844
601.02
OD 160
15
26160
1743.99
OD 200
5
16951
3390.27
MS Flanges
-
-
-
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.
PN 1.6 (MPa)
-
-
-
100 mm
13
199796
15368.95
150 mm
6
145192
24198.65
200 mm
2
71110
35554.85
Lowering, keeping in position and fixing of DI /C.I. sluice valves (with cap / with hand wheel & reflex valves) including Labour Charges and incidental charges and as per Technical Specification
-
-
-
100 mm
13
2859
219.94
150 mm
6
2237
372.77
200 mm
2
1230
614.99
Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportation- 80 mm Air Valve.
6
164400
27400.07
Labour charges for fixing kinetic Air valves including boring the mains and threading the bore fixing nipple etc., complete- 80 mm Air Valve.
6
2127
354.48
Construction of VRCC valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed, M-20 - 0.2 mts thick sidewall and cover slab thickness of 0.15 VRCC M30 grade ,Manhole Cover and encapsulated Steps including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of reinforcement & its fabrication charges and as per Technical Specification
-
-
-
110 mm pipe
13
478128
36779.07
160 mm pipe
6
231227
38537.77
200 mm pipe
2
80535
40267.43
Providing of House Service Connections to the Houses in Jagananna Colony Layout 110mm Dia.
-
-
-
Providing of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like electro Fusion Ferrule Tapping saddle, Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, restoration of the road cutting portions with backfill material with full compaction as per type design and as directed by departmental officer for finished item of work of dia 90mm
1427
2464743
1727.22
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements