Public Health And Municipal Engineering Department Tender

Supplying, Fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded.(As per approved Estimate rates) COLUMNS 10mm @ 150cc For Mat above PCC main bars 10mm @ 150cc For Mat above PCC Dist bars 12mm @ Vertical Bars for 0.3 x 0.3 Columns 12mm @ Vertical Bars for 0.3 x 0.3 Columns 8mm @ 150 Bars for Strips

Supply and placing of M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Concret for footings(As per data)

Supply and placing of M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Concret for Columns upto Plinth Beam bottum (As per data)

Supplying, Fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded.PLINTH BEAMS 12mm @ Bars for Long Plith Beams size 0.3 x 0.3 12mm @ Bars for Short Plith Beams size 0.3 x 0.3 12mm @ Bars for Short Plith Beams size 0.3 x 0.3 8mm @ 150 Bars for Stirups for Long Beams 8mm @ 150 Bars for Strips for short Beams

Supply and placing of M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Concret for Long Plinth Beams Concret for Short Plinth Beams Concret for Short Plinth Beams

Sand Filling of foundation trenches as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Construction of Brick Masonryusing country bricks in CM (1:6) prop.including cost & Conveyance to the site of work, labour charges for loading, unloading, stacking at site etc., complete for pump house walls - 1m3 Below lintal In Side rooms Toilet room Deductions: Doors windows Ventilators

Supply and placing of M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Concret for Columns upto lintal(As per approved Estimate rates)

Supplying, Fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded for lintal beam steel. 6mm dia

Supply and placing of M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Construction of Brick Masonryusing country bricks in CM (1:6) prop.including cost & Conveyance to the site of work, labour charges for loading, unloading, stacking at site etc., complete for pump house walls - 1m3 Above lintal In Side rooms Toilets Parapet

Supplying, Fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded for slab and beam Total concrete qty =10.59*80

20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Concret for Long Beams Concret for Short Beams

20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Concret for Slab Portion

Plastering in C.M (1:3) prop. - 12 mm thick using leak proof compound to make the Base Slab & Side Walls of Sump water tight including cost and conveyence all materials to site, labour charges etc., complete - for 10 m2. PLASTERING Below lintal In Side rooms Toilets Above lintal In Side rooms

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls Staff QUARTERS Frent Portion of Quarters Back Portion of Quarters Right Side of the Quarters Left Side of the Quarters

Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal Walls. (As per Approved Estimate Rates) Inside Quarters between Hall and Bedroom Inside Quarters between Hall and Kitchen Inside Quarters between Prayer room and Kitchen Bothroom Inside Quarters DeductionsDeductions: Doorswindows Ventilators Toilet Door of Size of 750 mm X 2100 mm (Single shutter) (Powder Coated Mild Steel doors, frames & Shutters) New Item

Supply & fixing of Bath/Toilet Door frame and Shutter with 8mm laminated (IS.15786) using with 50 mm x 35 mm x 1.3 mm thick aluminum door frame of weight 220 grm per Rft with a rebate of 30 mm for provision for shutter, shutter made with 45 mm x 25 mm x1.3mm thick aluminium section weight 210 grms per Rft with 8 mm groove to accomodate 822 thick laminated (IS.15786) and shutter having 3 nos of SS 304 gr Butt hinges of 100 mm long, 100 mm aluminimum handles-2Nos and also all labour fixing at site and 50 microns Ivory powder coated for aluminium door frame and shutter sections etc., complete finished item of work

Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder upto 50-60 microns thick with total coated thickness of 0.58 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for three tracks with grill provision size of 105 mm x 50 mm and without grill provision is of 90 mm x 50 mm and the Window Window with 3 shutters (center fixed shutter / Center sliding shutter / center Fly mesh shutter) and with Grill Window made of Outer Frame of Size 105 mm x 50 mm. Grill made of 10mm MS Square Rods for horizontal bars at a regular pitch of 150mm welded to MS flat of 12 x 6 mm Center Shutter Sliding: center shutter frame made of section of size 20mm x 47mm should be fitted with 5 mmthick plain float glass of reputed make. The supporting guide section of size15mm x 19mm of 0.58mm thick fixedhorizontally at top and bottom of shutter frame and slides along the bottom and top guide tracks made of sections size 24mm x 20mm of 0.58mm thick and 29mm x 20mm of 0.58mm thick (BMT-P.41) MAT-01449

Providing skirting to internal walls to 15 cm height/risers of steps with ceramic tiles 7.30 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work, including the cost of conveyance of all materials Dadooing SKIRTTING LONG WALLS SHORT WALLS AT DOOR DEDUCTION DOOR

Dadooing to walls with Glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete. TOILET DEDUCT W/C SIDE WALLS DEDUCTION DOOR

Supply and fixing of 6A-5 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and Laying of 3 core runs of 6.00 Sqmm with copper flexible multi stranded wires FR type in already laid conduit in ceiling or walls with all required lugs and connectors Lighting fixtures Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply and fixing of 7 W LED lamp fitting into normal holder with holder (ELEC-3.7.16)

Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min with Regulator and all accessories.Makes : Crompton HS Plus / Havells ES Neo/Orient Energy Star/ Halonix(Zephyr) Polycab (Synergy Star) with all standard accessories.

PVC Conduits for wiring

Supplying and fixing of 25mm Outer Dia. Heavy duty (2mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN WALLS/SLAB with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with junction boxes including all labour chartges etc. complete.

water supply pipe

Providing and fixing CPVC pipes of SDR 13.5 and fittings conforming to ASTM D2846 of approved make with necessary fittings such as bends, elbows, tees, sockets, unions, plugs & NECESSARY SUPPORTS etc.,including testing the pipelines as per specifications, etc all complete . as per specifications. (Ceiling Suspended/ Embedded in floor)- INTERNAL, Vertical & Terrace b) 25 mm - Vertical & Internal (28.60 OD)

Providing full way lever operated gun metal ball valve tested to a pressure not less than 15 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets,washers etc. 25 mm dia

internal sewerage

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for Casing purpose. (10 Kg/Sq.cm)

110mm OD (MAT-07672)

75 mm OD (MAT-07670)

Supply and fixing of Vent cowl

110mm OD( MAT-01987 )

75mm OD (MAT-01985)

Providing and fixing multiway PVC floor trap / P trap / Cockroache trap of approved make including jointing, cutting, making good the walls, floors, all complete as per specifications.

Sanitary Fixture & Fittings

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC withall internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wallflanges all of approved make etc. complete for finished item of work in all respects:White Colour(BMW-D.18)

Supplying & Fixing white glazed flat back half stall urinals1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm(BMW-D.34)

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock(BMW-D.24)

Supplying and fixing of S&F 12.7 mm N.P bib tap Indian make heavy duties Seiko/ Senior/ Nice or equivalent unit each As per data

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks unit 1.00 litre(MAT-01889)

supply and fixing of Name board with size 6x6 feets including MS frame and backdrop cover with MS Sheet including lettering,labour charge and etc., to complete as per the directions of the departmental authorities. (As per quatation)

Supply and devevery of RCC rings having size of 0.9m dia, 40mm thick and height 0.3m thick including cost and conveyance of all material etc., complete as per the directions of the departmental authorities.(As per quatation)

Supply and fixing of RCC precast slab cover over the RCC rings with propper plastering used in septic tank construction having size of 0.9m dia, 40mm thick including cost and conveyance of all material etc., complete as per the directions of the departmental authorities.(As per quatation)

Transformer at proposed Water Treatment Plant

Supply, Transportation, Installation, Testing and Commissioning of 100 KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended,and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes : As per list of recommended brands as category I. - ELEC-6.3.5 a 1. Quantity : 1 2. Rated KVA : 100 KVA 3. Service & Location: ContinuousOutdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling : ONAN 8. Temp Rise : 40⁰C in oil, 45⁰C by resistance 9. Vector Group: Dyn 11 10. Primary Connection : Delta 11. Nominal Voltage / Current : _ 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires: 3 16. Secondary connection : Star 17. Secondary Volts / Current : 433V 18. Secondary phases : 3 19. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps) 21. Terminal arrangement. a.HV: HT terminal box as per the sitecondition. b. LV: Cable box suitable to receive --- ------- --Sq.mm XLPE cable 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] --- as per IS 24. Total Losses at 100% Loading [Watts] [Max]--- as per IS 25.Percentage Impedance at 75 deg. C at -----as per IS 26. No Load current: Less than 2% of full load current. 27. Standard Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs: Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable):Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug: one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silica gel Breather : One k. Terminal Arrangement: HV With TerminalBox l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Drain cum filter valve with blanking plate: One o. Air release device : One p. Thermometer Pocket : One q. Four :Unidirectional flat rollers r. One :10Cm dial thermometer (Rigid stemtype)

100 kVA Copper Wound Transformer near prop. W.T.P(MAT 04042) Page 157

Transformer yard at proposed Water Treatment Plant & prop. Raw Water GLBR

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--upto 3m depth

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss Column footings

Providing PCC (1:4:8) using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing, vibration, laying in position, curing etc., complete for Column footings

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M20 design mix concrete

Column footings

Columns 1.20-0.10-0.10-0.30+1.80

Plinth beam 2 (15+12) = 54-gate 3.00=51.00

deduct columns

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS

Columns

Plinth beam

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Column footings

Columns

Plinth beams

Supplying and fixing galvanised steel barbed wire (IS : 278-1978 Type B) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). BMT-F.08

Horizontal 6 rows

Diagonal 2 rows

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete

Gate 3.00m wide

Providind Synthetic enamel paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss

Gate 3.00m wide

Supply and filling the transformer yard with 40mm HBG metal m/c including cost and conveyance of all materials, labour charges etc., complete for finishing item of work as per directions of the departmental authorities