Public Health And Municipal Engineering Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Public Health And Municipal Engineering Department - PHMED Tender
Civil And Construction
Building Construction
Opening Date7 Feb 2024
Closing Date20 Feb 2024
Tender Amount₹ 4,48,90,596
Costs
EMD
₹ 4,48,906Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
719385Tender No
104/DB/AE/12/AMRUT2.0(Tr-I&II)/KLD-WS/2023 Dated.01-02-2024 (3rd call)Tender Authority
Public Health And Municipal Engineering Department ViewPurchaser Address
-Website
http://http://www.appublichealth.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.Drilling of Bore well 165 mm dia. Drilling of Bore well 165 mm dia. above 150.00 m up to 250.00 m depth
1200
766884
639.07
Geologist charges for selection of scheme source
12
17179
1431.55
Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.180mm dia pipe -6 Kgs/cm2
360
312894
869.15
Supply & Fixing of 180 mm dia PVC Bore Cap per 1No
12
4295
357.89
2.Supply and fixing of submersible pump sets capacity of 10 HP with Accessories (Bupana palli,Mudigallu).
-
-
-
S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete include labour charges
1000
549900
549.9
Supply and Transportation of 10HP, 20-24 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.
Makes: As per list of recommended brands as category I.(ELEC 5.4.5.iMAT 03659)
4
228800
57200
Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.above 7.5 HP to 12.5 HP with Star- Delta Starter Makes: As per list of recommended brands .
Voltmeter ; 0-500 V 96x96mm size. ,0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. , Single phase preventor of suitable range - 1No. , 32 A TP, 10KA MCB. - 1No ,Indication lamps (R-Y-B) with switch control - 1set , Voltmeter & Ammeter selector switch - 2 Nos , Supply and fixing of ISI Mark suitable capacitor(ELEC 5.4.17, MAT 03714)
4
67760
16940
S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 50 mm NB Size
4
12838
3209.62
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" Pipe fitting clamp
8
3200
400
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" Bore cover plate
4
1000
250
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" GI Flange
24
3600
150
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" GI Long Bend
16
4000
250
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" GI Couplings
36
9000
250
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" GI Elbow
36
6480
180
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 90mm x 50mm GI Collar
16
5600
350
Supply of 3 Core 4.0 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990.
Makes : As per list of recommended brands as category I
2000
262000
131
Supply of 6 sq WPSC (Weather Proof Single Core) ISI Alluminium Wire.
Makes : As per list of recommended brands. MAT-02789
600
10896
18.16
PVC / Cotton Insulation tape Role ( 10 Mtrs) ,ELEC-8.1.15
20
440
22
Erection of new submersible motor pumpset including its fittings and labour charges etc. complete
4
20000
5000
3.Supply and fixing of submersible pump sets capacity of 15 HP with Accessories(Kurakula Thota).
-
-
-
S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete include labour charges
1000
549900
549.9
Supply and Transportation of 15HP, 16-24 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.
Makes: As per list of recommended brands as category I.
4
263120
65780
Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.From 15 HP up to 20 HP with Automatic Star Delta Starter
Makes: As per list of recommended brands .
Voltmeter ; 0-500 V 96x96mm size. ,0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. , Single phase preventor of suitable range - 1No. , 32 A TP, 10KA MCB. - 1No ,Indication lamps (R-Y-B) with switch control - 1set , Voltmeter & Ammeter selector switch - 2 Nos , Supply and fixing of ISI Mark suitable capacitor(ELEC 5.4.17, MAT 03714)
4
89540
22385
S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 50 mm NB Size
4
12838
3209.62
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" Pipe fitting clamp
8
3200
400
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" Bore cover plate
4
1000
250
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" GI Flange
24
3600
150
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" GI Long Bend
16
4000
250
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" GI Couplings
36
9000
250
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 2" GI Elbow
36
6480
180
Supply delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 90mm x 50mm GI Collar
16
5600
350
Supply of 3 Core 4.0 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990.
Makes : As per list of recommended brands as category I
2000
262000
131
Supply of 6 sq WPSC (Weather Proof Single Core) ISI Alluminium Wire.
Makes : As per list of recommended brands. MAT-02789
600
10896
18.16
PVC / Cotton Insulation tape Role ( 10 Mtrs) ,ELEC-8.1.15
20
440
22
Erection of new submersible motor pumpset including its fittings and labour charges etc. complete
4
20000
5000
4.Laying of pumping mains with HDPE,Grade PE-100, PN 6 Kg/sqcm including trench excavation , lowering, laying, jointing, testing of pipes, refilling of trench, DI sluice valves,RCC valve chambers etc .
(Bupanapalli, Mudigallu &Kurakula Thota).
-
-
-
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, etc complete for pipe line trenches & building foundations where depth is less than 1.50 times the width (RBR-FNDN-1) for pipeline trenches and as per specification drawings and as directed by the departmental officer with an initial lead of 50 M and with all lifts and delifts for pipe line trenches for laying watermains including divertion of traffic all incidental and operational charges etc., complete. for the pipe line trench where the depth is less than 1.5times width.(By Machinary upto 3m depth)90% Mechanical Means
5043.37
641012
127.1
Excavation for roadway in hard rock with controlled blasting by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross sections, loading and disposal of cut road with in all lifts and leads upto 1000 metres Hard rock 5%
265.44
71374
268.89
Supply, & delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation, stacking etc., complete including all taxes but excluding GST 90mm dia PE -100 PN 6.0
1735
456045
262.85
Supply, & delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation, stacking etc., complete including all taxes but excluding GST 110mm dia PE -100 PN 6.0
732
291519
398.25
Supply, & delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation, stacking etc., complete including all taxes but excluding GST 140mm dia PE -100 PN 6.0
3146
2003278
636.77
Supply, & delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation, stacking etc., complete including all taxes but excluding GST 160mm dia PE -100 PN 6.0
154
128644
835.35
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S. 90mm dia
1735
89960
51.85
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S. 110mm dia
732
44323
60.55
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S. 140mm dia
3146
270650
86.03
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S. 160mm dia
154
13587
88.23
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete. Tee's 90mm dia
4
1981
495.36
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. Tee's 110mm dia
7
4104
586.25
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. Tee's 160mm dia
1
2097
2097.33
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete.Reducers 90x110
11
3812
346.53
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete.Reducers 110x125
2
1057
528.31
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete.Reducers 125x140
2
1463
731.68
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete.Reducers 140 x160
2
2043
1021.4
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. Bends 90mm dia
22
9998
454.46
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. Bends 110mm dia
7
4207
601.02
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. Bends 140mm dia
6
7015
1169.1
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. Bends 160mm dia
2
3488
1743.99
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. Pipe end long neck 90mm dia
22
4899
222.69
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. Pipe end long neck 110mm dia
8
2463
307.9
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. Pipe end long neck 140mm dia
30
15542
518.08
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. M.S flanges 90mm dia
22
4899
222.69
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. M.S flanges 110mm dia
8
1872
234.05
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. M.S flanges 140mm dia
30
10464
348.8
supply, & delivery of GI Pipes of various sizes and transportation anywhere in Andhra Pradesh, excluding GST
150
390125
2600.83
Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete. 100mm dia
2
54800
27400.07
Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportation. 50DN PN 1.6
12
191800
15983.37
Labour Charges for fixing Kinetic Air Valves with isolating Sluice Valves, Double Air Valves/ Air Cushion Valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc complete 50 DN PN1.6 ( Air Valve)
12
3627
302.22
Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (PHE-JCIF-5) 50 DN PN1.6 ( Air Valve)
12
2662
221.82
Valve chambers 12nos upto 500mm dia
-
-
-
Construction of VRCC valve chamber as per type design with Earth work, CC (1:4:8) bed - min 0.1 m thik, M-20 - Base slab- 0.15m min thk , sidewall -0.15m thk and cover slab VRCC M20 grade -0.15m thk,Manhole Cover HD -20 (560mm) and encapsulated Steps including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of reinforcement & its fabrication charges and as per Technical Specification
12
303444
25287
5.Construction of 100KL Capacity ELSR with a Staging height of 15Mtr
-
-
-
Construction of 100KL ELSR with 15m staging VRCC M30 Grade with Seismic analysis in the Zone-II and with a wind pressure up to "250 kg/sq m" with SBC-20 T/Sqm with raft foundation of suitable design as per the standard specifications as specified in PH SoR 2023-24 including the following accessories with min VRCC M 30 grade concrete and min Fe-500 steel. The water retaining components shall be designed for un-cracked section @ Bupanapalle
100000
3096000
30.96
1)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 20 T/Sqm.
-
-
-
2) All concrete components shall be designed with M30 Design Mix proportion.
-
-
-
e) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition.
-
-
-
3) a) Rate inclusive of three coats of epoxy paint to inner surface of the reservoir including roof.
-
-
-
4)The above rates shall be adopted for estimate purposes for construction of ELSR for a finished work including 2 coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings.
-
-
-
5) The above rates are applicable for wind pressures up to 250 kg / Sq m .For decrease in wind pressure the rate has to be decreased by 5% per every 100kg/Sqm. If the ELSR / OHSR are to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs.
-
-
-
6) (a)For tribal/Agency / Rural area, the above rates as arrived up to shall be increased by 10%.
(b) An additional increase of 7.50% shall be allowed for OHSRs/ELSRs located in agency areas over the above rates for RWS Department works.
-
-
-
7) If the ELSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the design & difference to be paid extra.
-
-
-
8) If the ELSR is to be designed for seismic forces a) The above rates are applied up to Zone-II earth quake. b) For Zone-III earth quake the above rates are to be increased by 15 %.
-
-
-
9) Fixtures include :
-
-
-
a) RCC or Aluminum ladder inside 0.60 m wide
-
-
-
b) Spiral staircase on the outside shall be provided up to 200KL. Above 200KL capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing up to 1.0 height.
-
-
-
c) Lightening arrestor, including conductor and earthling etc.
-
-
-
d) RCC ventilators with copper or stainless steel fly proof mesh
-
-
-
e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2 Nos.
-
-
-
f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No.
-
-
-
g) The ladder shall be with M.S ladder and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only.
-
-
-
h) Minimum staging for all ELSR/OHSR shall be 10.0mts.
-
-
-
i) The increase in staging shall be at 1.0mt interval.
-
-
-
j) The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts.
-
-
-
k). The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with M.S collapsible gate up to 1st brace level fromground level to prevent unauthorized entry.
-
-
-
l). D.I swan neck ventilators shall be provided in top dome and slab.
-
-
-
m). The above rates are exclusive of all inlet, out let connection and valves. All valves near inlet, out let and for scour of ELSRs shall be D.I valves of heavy duty confirming to the specification of SoR item No.28
-
-
-
5.Construction of 100KL Capacity ELSR with a Staging height of 15Mtr
-
-
-
Construction of 100KL ELSR with 15m staging VRCC M30 Grade with Seismic analysis in the Zone-II and with a wind pressure up to "250 kg/sq m" with SBC-20 T/Sqm with raft foundation of suitable design as per the standard specifications as specified in PH SoR 2023-24 including the following accessories with min VRCC M 30 grade concrete and min Fe-500 steel. The water retaining components shall be designed for un-cracked section @ Mudigallu
100000
3096000
30.96
1)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 20 T/Sqm.
-
-
-
2) All concrete components shall be designed with M30 Design Mix proportion.
-
-
-
e) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition.
-
-
-
3) a) Rate inclusive of three coats of epoxy paint to inner surface of the reservoir including roof.
-
-
-
4)The above rates shall be adopted for estimate purposes for construction of ELSR for a finished work including 2 coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings.
-
-
-
5) The above rates are applicable for wind pressures up to 250 kg / Sq m .For decrease in wind pressure the rate has to be decreased by 5% per every 100kg/Sqm. If the ELSR / OHSR are to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs.
-
-
-
6) (a)For tribal/Agency / Rural area, the above rates as arrived up to shall be increased by 10%.
(b) An additional increase of 7.50% shall be allowed for OHSRs/ELSRs located in agency areas over the above rates for RWS Department works.
-
-
-
7) If the ELSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the design & difference to be paid extra.
-
-
-
8) If the ELSR is to be designed for seismic forces a) The above rates are applied up to Zone-II earth quake. b) For Zone-III earth quake the above rates are to be increased by 15 %.
-
-
-
9) Fixtures include :
-
-
-
a) RCC or Aluminum ladder inside 0.60 m wide
-
-
-
b) Spiral staircase on the outside shall be provided up to 200KL. Above 200KL capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing up to 1.0 height.
-
-
-
c) Lightening arrestor, including conductor and earthling etc.
-
-
-
d) RCC ventilators with copper or stainless steel fly proof mesh
-
-
-
e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2 Nos.
-
-
-
f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No.
-
-
-
g) The ladder shall be with M.S ladder and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only.
-
-
-
h) Minimum staging for all ELSR/OHSR shall be 10.0mts.
-
-
-
i) The increase in staging shall be at 1.0mt interval.
-
-
-
j) The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts.
-
-
-
k). The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with M.S collapsible gate up to 1st brace level fromground level to prevent unauthorized entry.
-
-
-
l). D.I swan neck ventilators shall be provided in top dome and slab.
-
-
-
m). The above rates are exclusive of all inlet, out let connection and valves. All valves near inlet, out let and for scour of ELSRs shall be D.I valves of heavy duty confirming to the specification of SoR item No.28
-
-
-
Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation and all Taxes.Up to 500 x 500 mm dia.For inlet and Over Flow , For Outlet and Scour , Duck foot bends and Bell mouths
3930.08
589237
149.93
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. 200 mm dia
4
142220
35554.9
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. 100 mm dia
4
61476
15369
Valve chambers 4 nos upto 500mm dia
-
-
-
Construction of VRCC valve chamber as per type design with Earth work, CC (1:4:8) bed - min 0.1 m thik, M-20 - Base slab- 0.15m min thk , sidewall -0.15m thk and cover slab VRCC M20 grade -0.15m thk,Manhole Cover HD -20 (560mm) and encapsulated Steps including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of reinforcement & its fabrication charges and as per Technical Specification
8
202296
25287
6.Construction of 300KL Capacity ELSR with a Staging height of 18Mtr
-
-
-
Construction of 300 KL ELSR with 18 m staging VRCC M30 Grade with Seismic analysis in the Zone-II and with a wind pressure up to "250 kg/sq m" with SBC-20 T/Sqm with raft foundation of suitable design as per the standard specifications as specified in PH SoR 2023-24 including the following accessories with min VRCC M 30 grade concrete and min Fe-500 steel. The water retaining components shall be designed for un-cracked section.
300000
7770000
25.9
1)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 20 T/Sqm.
-
-
-
2) All concrete components shall be designed with M30 Design Mix proportion.
-
-
-
e) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition.
-
-
-
3) a) Rate inclusive of three coats of epoxy paint to inner surface of the reservoir including roof.
-
-
-
4)The above rates shall be adopted for estimate purposes for construction of ELSR for a finished work including 2 coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings.
-
-
-
5) The above rates are applicable for wind pressures up to 250 kg / Sq m .For decrease in wind pressure the rate has to be decreased by 5% per every 100kg/Sqm. If the ELSR / OHSR are to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs.
-
-
-
6) (a)For tribal/Agency / Rural area, the above rates as arrived up to shall be increased by 10%.
(b) An additional increase of 7.50% shall be allowed for OHSRs/ELSRs located in agency areas over the above rates for RWS Department works.
-
-
-
7) If the ELSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the design & difference to be paid extra.
-
-
-
8) If the ELSR is to be designed for seismic forces a) The above rates are applied up to Zone-II earth quake. b) For Zone-III earth quake the above rates are to be increased by 15 %.
-
-
-
9) Fixtures include :
-
-
-
a) RCC or Aluminum ladder inside 0.60 m wide
-
-
-
b) Spiral staircase on the outside shall be provided up to 200KL. Above 200KL capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing up to 1.0 height.
-
-
-
c) Lightening arrestor, including conductor and earthling etc.
-
-
-
d) RCC ventilators with copper or stainless steel fly proof mesh
-
-
-
e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2 Nos.
-
-
-
f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No.
-
-
-
g) The ladder shall be with M.S ladder and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only.
-
-
-
h) Minimum staging for all ELSR/OHSR shall be 10.0mts.
-
-
-
i) The increase in staging shall be at 1.0mt interval.
-
-
-
j) The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts.
-
-
-
k). The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with M.S collapsible gate up to 1st brace level fromground level to prevent unauthorized entry.
-
-
-
l). D.I swan neck ventilators shall be provided in top dome and slab.
-
-
-
m). The above rates are exclusive of all inlet, out let connection and valves. All valves near inlet, out let and for scour of ELSRs shall be D.I valves of heavy duty confirming to the specification of SoR item No.28
-
-
-
Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation and all Taxes.Up to 500 x 500 mm dia.For inlet and Over Flow , For Outlet and Scour, Duck foot bends and Bell mouths
2199.58
329783
149.93
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.100 mm dia
2
30738
15369
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.. 200 mm dia
2
71110
35554.9
Valve chambers 4 nos upto 500mm dia
-
-
-
Construction of VRCC valve chamber as per type design with Earth work, CC (1:4:8) bed - min 0.1 m thik, M-20 - Base slab- 0.15m min thk , sidewall -0.15m thk and cover slab VRCC M20 grade -0.15m thk,Manhole Cover HD -20 (560mm) and encapsulated Steps including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of reinforcement & its fabrication charges and as per Technical Specification
4
101148
25287
8.Construction of RCC 50 KL Capacity Sump at Bupanapalli, Mudigallu, Kurakula Thota
-
-
-
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Up to 3.00 Mts depth below GL With Mechanical Means.
184.74
23480
127.1
Excavation for roadway in hard rock with controlled blasting by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross sections, loading and disposal of cut road with in all lifts and leads upto 1000 metres (Hard rock)
46.17
12415
268.89
Filling with sand with a lead in layer not exceeding 15 cm thick, consolidating each deposited layer by waering and ramming including cost and conveyance of water to work site and all opratinal, inciddental,, labour chargs, hire charges of T&P etc., compelte for inished item fo work
11.55
13509
1169.58
Providing Plain cement concrete 1:3:6 using 20 mm metal with concrete machine mixing upto plinth level as approved by the department including cost and conveyance of all materials to site, machine mixing of concrete, all lifts, leads, delifts, centering, laying in position, vibrating, compacting, curing, removal of centering, all labour charges, tools and plants, and all other incidental and operational charges etc., complete as per specifications, drawings and as directed by the Engineer - in - Charge For Bed
17.31
108451
6265.25
RCC M-30 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Bottom raft/floor Slab
37.02
396336
10705.99
RCC M-30 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Side Wall
35.46
500099
14103.19
RCC M-30 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For Roof Slab
6.84
88338
12914.92
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work.
6345.6
595281
93.81
Painting with two coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade II making making three coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site, Scoffolding, Curing charges and all operational, incidental, labour charges etc. complete for finished item of work for External walls
484.89
114352
235.83
Supply & Delivery of SFRC manhole cover of H.D.-20 with 560mm dia clear opening and frames as per BIS:12592 (Part 1&2) with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding central excise duty, sales tax, octroi and other Govt levies etc., as applicable.
3
7270
2423.41
Supply and fixing of submersible pump sets capacity of 5 HP with Accessories in 50 KL Sump at Bupanapalli, Mudigallu
-
-
-
supply, & delivery of GI Pipes of various sizes and transportation anywhere in Andhra Pradesh, excluding GST.100mm GI ‘B’ Class Pipe
120
198253
1652.11
Supply delivery and fixing of the Specials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 4" Pipe fitting clamp
8
4800
600
Supply delivery and fixing of the Specials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 4" GI Long Bend
8
12000
1500
Supply delivery and fixing of the Specials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 4" GI Couplings
8
4800
600
supply, & delivery of GI Pipes of various sizes and transportation anywhere in Andhra Pradesh, excluding GST.100mm GI ‘B’ Class Pipe 90mm x 50mm GI Collar
8
5600
700
Supply and Transportation of 5HP, 5-10 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.Discharge-228 lpm Head-48 to 70.4mts
Makes: As per list of recommended brands as category I.(ELEC 5.4.5.iMAT 03659)
4
148500
37125
Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.Upto 7.5 HP with DOL Starter of. Makes: As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. ,0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. , Single phase preventor of suitable range - 1No. , 32 A TP, 10KA MCB. - 1No ,Indication lamps (R-Y-B) with switch control - 1set , Voltmeter & Ammeter selector switch - 2 Nos , Supply and fixing of ISI Mark suitable capacitor(ELEC 5.4.17, MAT 03714)
4
38720
9680
Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 50 mm NB Size
4
12838
3209.62
Supply of 3 Core 4.0 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes : As per list of recommended brands as category I
120
15720
131
Supply of 6 sq WPSC (Weather Proof Single Core) ISI Alluminium Wire.
Makes : As per list of recommended brands. MAT-02789
120
2179
18.16
PVC / Cotton Insulation tape Role ( 10 Mtrs) ,ELEC-8.1.15
20
440
22
Supply and delivery of bolts and nuts with double washers including conveyance etc., complete, but excluding taxes. (1/2" to 1"). MAT 08262
8
1109
138.61
Erection of new submersible motor pumpset including its fittings and labour charges etc. complete
4
20000
5000
Supply and fixing of submersible pump sets capacity of 7.5 HP with Accessories in 50 KL Sump at Kurakula Thota
-
-
-
supply, & delivery of GI Pipes of various sizes and transportation anywhere in Andhra Pradesh, excluding GST.150mm GI ‘B’ Class Pipe
90
234075
2600.83
Supply delivery and fixing of the Specials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 6" Pipe fitting clamp
6
4200
700
Supply delivery and fixing of the Specials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 6" GI Long Bend
6
12000
2000
Supply delivery and fixing of the Specials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 4" GI Couplings
6
3600
600
Supply delivery and fixing of the Specials including cost and conveyance of all materials charges and labour charges etc completed.(Based on local rates) 90mm x 50mm GI Collar
6
4200
700
Supply and Transportation of 7.5HP, 5-10 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.Discharge-379.8 lpm Head-46 to 67mts
Makes: As per list of recommended brands as category I.
3
111375
37125
Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.above 7.5 HP to 12.5 HP with Star- Delta Starter Makes: As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. ,0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. , Single phase preventor of suitable range - 1No. , 32 A TP, 10KA MCB. - 1No ,Indication lamps (R-Y-B) with switch control - 1set , Voltmeter & Ammeter selector switch - 2 Nos , Supply and fixing of ISI Mark suitable capacitor(ELEC 5.4.17, MAT 03714)
3
50820
16940
Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 50 mm NB Size
3
9629
3209.62
Supply of 3 Core 4.0 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes : As per list of recommended brands as category I
180
23580
131
Supply of 6 sq WPSC (Weather Proof Single Core) ISI Alluminium Wire.
Makes : As per list of recommended brands. MAT-02789
90
1634
18.16
PVC / Cotton Insulation tape Role ( 10 Mtrs) ,ELEC-8.1.15
15
330
22
Supply and delivery of bolts and nuts with double washers including conveyance etc., complete, but excluding taxes. (1/2" to 1"). MAT 08262
6
832
138.61
Erection of new submersible motor pumpset including its fittings and labour charges etc. complete
3
15000
5000
12.Supply, Delivery and Erection of Chlorination Plant ranging from 0 to 2 Kg/Hr with required accessories
-
-
-
Supply, delivery and fixing of Chlorinator ranging from 0 to 2 Kg/Hr with standard equipments including errection as per site condition at Water Works with required materials with the following accessories. UNIK Series 2023 panel mounting Gravity feed chlorinator ranging from 0 to 5 Kg/Hr with Regulator, Pressure Gauge, Control Valve and Rota Meter controls connected with Anti Corrosive materials fixed in fibre board of UNIK Brand. Fabrication and supply of Angular frame to fix the chlorinator with 4/40mm size angles up to 1.65 mtr Height and 0.45 mtr Width including painting, fixing the frame with cement concrete, earth work and other miscellaneous works as per site condition. Supply and erecting of 300mm dia PVC absorption tower having 2400mm height with base plate fixing on Brick Bed including cost of all materials and Bed work complete, where the Chlorine and water mixed properly to form Chlorine Solution. Supply and fixing of liquid trap (to filter the liquid gas) made with mild steel seamless tube with filter inside. Supply and filling the graded media in solutioniser (adsorption tower) with necessary PVC pipes. Supply and fixing high pressure seem less copper tube connecting between Tonner and filter with Galvanised Clamp set, Copper Ferrules, Nuts, Nipples, Led washers and Ammonia for Testing of leaks as per requirement. Labour charge for fixing, kept in running and trail run. Supply, delivery and fixing the following PVC Pipes as per requirement in the site with necessary PVC fittings. (a) 40mm PVC pipe and fittingd (b) 32mm PVC pipe and fittings (c) 25mm PVC pipe and fittings. Labour charge for fixing, kept in running and trial run.
3
447000
149000
Supply of ISI Marked Empty Chlorine Gas Cylinder of 100Kgs chlorine gas fitted with ISI marked valve screen protection cap painted in appropriated internal colour code system supported with manufactures test certificate and approved from chief controller of explosure, Nagpur supply and filling of vaporized liquid present by volume 99.90% Oxygen by volume of 0.05% (Residual on evaporation present by volume 0.05%) including transportation of filled Cylinder from Factory and Empty Cylinder from Kundukur to Factory(Excluding cost of Cylinder)including loading and unloading etc., complete
3
28500
9500
13. SUPPLY, DELIVERY, LAYING, JOINTING & TESTING OF PROPOSED CLEAR WATER GRAVITY MAIN FROM ELBR TO VARIOUS ELSRS
-
-
-
Cutting open C.C. road surface with concrete saw cutter and removal with Breaker including stacking of excavated materials for pipe line trench work. SSR PH Sl.No.25b page No.8.
5.7
21313
3739.07
Cutting open bituminous tar road surface including depositing of excavated materials for sewer line trench work including labour charges and all incidental and operational charges etc., complete. SSR Sl.No.25a page No.7 (PH SSR pg. no:43 item no:26a)
38
4486
118.05
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Up to 3.00 Mts depth below GL With Mechanical Means.
2533.5
322008
127.1
Excavation for roadway in hard rock with controlled blasting by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross sections, loading and disposal of cut road with in all lifts and leads upto 1000 metres
133.34
35854
268.89
supply, & delivery of PN 160mm 12.50 PVC-O Pipes of Class-500 homogenous Spigot high pressure pipes confirming to IS 16647:2017 inclusive cost of EPDM gasket seals on joints, and transportation anywhere in Andhra Pradesh, excluding GST.
3025
3852701
1273.62
Lowering, laying, jointing and testing to hydralic test pressure including cost of water with minimum water lead of 500m for160mm PVC-O pressure pipes in ready made trenches true to alignment and gradient including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials as per BIS No. 7634 - Part III - 1975.
3025
98978
32.72
Supply and delivery at site of moulded or fabricated OPVC fittings compatible with OPVC pipes confirming to IS 16647-2017 to anywhere in Andhra Pradesh, excluding GST.
-
-
-
Air valves TEEs 160x40
4
18287
4571.87
Bends 160 mm dia
4
18151
4537.78
Bends 160 mm dia
4
12793
3198.26
Bends 160 mm dia
3
8340
2780.16
Flanged Socket Tail piece 160 dia for Sluice Vlaves.
12
42865
3572.06
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.. 150mm dia
2
48397
24198.7
Labour charges for lowering and keeping in position of D.I sluice valves, reflux valves and scour valves
2
746
372.77
Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportation.
4
63933
15983.37
Labour Charges for fixing Kinetic Air Valves with isolating Sluice Valves, Double Air Valves/ Air Cushion Valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc complete
4
1209
302.22
Jointing DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500m and testing to required pressure complete. as per BIS No.3114/85, sl no.135, item no.10 50 DN PN1.6 ( Air Valve)
4
887
221.82
Jointing DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500m and testing to required pressure complete. as per BIS No.3114/85, sl no.135, item no.10 150mm dia
2
1097
548.6
Construction of RCC valve chamber in M20 Grade as per Type design including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete but excluding cost of Manhole cover, reinforcement & its fabrication charges
6
151722
25287
Filling with sand in layer not exceeding 15 cm thick, consolidating each deposited layer by waering and ramming including cost and conveyance of water to work site and all opratinal, inciddental,, labour chargs, hire charges of T&P etc., compelte for inished item fo work
7.6
8889
1169.58
Providing Plain cement concrete 1:4:8 using 40 mm metal with concrete mixer upto plinth level as approved by the department including cost and conveyance of all materials to site, machine mixing of concrete, all lifts, leads, delifts, centering, laying in position, vibrating, compacting, curing, removal of centering, all labour charges, tools and plants, and all other incidental and operational charges etc., complete as per specifications, drawings and as directed by the Engineer - in - Charge
7.6
38299
5039.39
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. (Excluding Dowel bars, Expansion joints, admixtures, Polythene sheet , Bitumen primer ,Plastisizer , Debonding strips , curing compound etc.,)
12.92
84170
6514.7
Laying of distribution net work with HDPE, Grade PE-100, PN 6 Kg/sqcm including trench excavation , lowering, laying, jointing, testing of pipes, refilling of trench, DI sluice valves,RCC valve chambers etc .(Bupanapalli, Mudigallu &Kurakula Thota)
-
-
-
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Up to 3.00 Mts depth below GL With Mechanical Means.
11894.15
1511746
127.1
Excavation for roadway in hard rock with controlled blasting by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross sections, loading and disposal of cut road with in all lifts and leads upto 1000 metres
626.01
168328
268.89
Filling with sand with a lead in layer not exceeding 15 cm thick, consolidating each deposited layer by waering and ramming including cost and conveyance of water to work site and all opratinal, inciddental,, labour chargs, hire charges of T&P etc., compelte for inished item fo work
99.44
116303
1169.58
Supply, & Delivery of PE 100-PN 6 HDPE pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes )90 mm dia OD HDPE
11387
2993073
262.85
Supply, & Delivery of PE 100-PN 6 HDPE pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes 110 mm dia OD HDPE
2138
851459
398.25
Supply, & Delivery of PE 100-PN 6 HDPE pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes 140 mm dia OD HDPE
743
473120
636.77
Supply, & Delivery of PE 100-PN 6 HDPE pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes 200 mm dia OD HDPE
144
187389
1301.31
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S 90 mm dia OD HDPE
11387
590416
51.85
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S 110 mm dia OD HDPE
2138
129456
60.55
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S. 140 mm dia OD HDPE
743
63920
86.03
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S 200 mm dia OD HDPE
144
18393
127.73
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete. Tee's 90 mm dia OD HDPE
85
42106
495.36
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete Tee's 110 mm dia OD HDPE
101
59211
586.25
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., completeTee's 140 mm dia OD HDPE
4
4872
1217.95
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete Tee's 200 mm dia OD HDPE
2
7833
3916.31
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete Reducers 90x110
118
40891
346.53
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., completeReducers 110x125
10
5283
528.31
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., completeReducers 125x140
12
8780
731.68
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete Reducers 140x160
4
4086
1021.4
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete Reducers 160 x 180
4
5649
1412.23
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete Reducers 180 x 200
4
7299
1824.66
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., completeBends 90 mm dia OD HDPE
16
7271
454.46
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., completeBends 110 mm dia OD HDPE
12
7212
601.02
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., completeBends 140 mm dia OD HDPE
10
11691
1169.1
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete Bends 200 mm dia OD HDPE
4
13561
3390.27
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete Pipe end long neck 110 mm dia OD HDPE
6
1847
307.9
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., completePipe end long neck 140 mm dia OD HDPE
8
4145
518.08
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete. Pipe end long neck 200 mm dia OD HDPE
4
5676
1419.05
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete. M.S flanges 110 mm dia OD HDPE
6
1404
234.05
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete. M.S flanges 140 mm dia OD HDPE
8
2790
348.8
supply, & delivery of HDPE fittings conforming to IS 4984 - 2016 including transportation to any where in A.P, including excise duty, sale tax and specials etc., complete. M.S flanges 200 mm dia OD HDPE
4
3336
833.93
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. End Caps 90 mm dia OD HDPE
81
12331
152.24
supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete. End Caps 110 mm dia OD HDPE
6
1043
173.83
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.100mm dia
3
46107
15369
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.150mm dia
4
96795
24198.7
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.200mm dia
2
71110
35554.9
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces100mm dia
3
660
219.94
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces 150mm dia
4
1491
372.77
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces 200mm dia
2
1230
614.99
Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (PHE-JCIF-5) 100mm dia
3
1073
357.54
Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (PHE-JCIF-5)150mm dia
4
2194
548.6
Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (PHE-JCIF-5) 200mm dia
2
1197
598.41
Construction of RCC valve chamber
-
-
-
Construction of VRCC valve chamber as per type design with Earth work, CC (1:4:8) bed - min 0.1 m thik, M-20 - Base slab- 0.15m min thk , sidewall -0.15m thk and cover slab VRCC M20 grade -0.15m thk,Manhole Cover HD -20 (560mm) and encapsulated Steps including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of reinforcement & its fabrication charges and as per Technical Specification
9
227583
25287
Providing of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like PP Clamp saddle with SS-304 insert, Compression male/female threaded adaptor with SS insert , Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, restoration of the road cutting portions with backfill material with full compaction as per type design and as directed by departmental officer for finished item of work.
2523
3930834
1558
Estimate Contract Value (ECV) in Rs.
-
44890596
-
//Attested//
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements