Public Health And Municipal Engineering Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Public Health And Municipal Engineering Department - PHMED Tender
Civil And Construction
Water Storage And Supply
Opening Date28 Feb 2024
Closing Date14 Mar 2024
Tender Amount₹ 3,27,47,091
Costs
EMD
₹ 3,27,471Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
726071Tender No
1595/NDGM/NPI/AMRUT2.0/WS/TO/2024-1, Dt.23-2-2024Tender Authority
Public Health And Municipal Engineering Department ViewPurchaser Address
-Website
http://http://www.appublichealth.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
110mm dia
5035
1980920
393.43
160mm dia
1646
1358329
825.23
200mm dia
600
771324
1285.54
250mm dia
994
1991399
2003.42
Manufacture, Supply & Delivery of PVC-O Pipes of Class-500 homogenous Spigot high pressure pipes confirming to IS: 16647-2017 inclusive of EPDM gasket seals on joints and transportation anywhere in Andhra Pradesh, excluding GST 315 mm dia. (OPVC)
3406
10626277
3119.87
Manufacture, Supply, & Delivery of HDPE (PE –100 Grade) fittings conforming to IS 4984 - 2016 including transportation to anywhere in A.P. Excluding all taxes. Pipe ends - long neck 90 mm distrubution valves
4
891
222.69
110 mm distrubution valves
16
4926
307.9
160 mm dia
12
8698
724.86
200 mm dia
2
2838
1419.05
250 mm dia
2
3817
1908.73
b) MS Flanges, 90 mm distrubution valves
4
891
222.69
110 mm distrubution valves
16
3745
234.05
160 mm dia
12
5481
456.73
200 mm dia
2
1668
833.93
250 mm dia
2
2470
1235
c) End Caps, 90mm dia
20
3045
152.24
110 mm dia
17
2955
173.83
160 mm dia
3
1295
431.74
200mm dia
1
766
765.77
250 mm dia
2
2270
1135.01
d) Reducers, 90x110mm dia
4
1386
346.53
110X125 mm dia
2
1057
528.31
125x140 mm dia
2
1463
731.68
140x160 mm dia
4
4086
1021.4
160x180 mm dia
4
5649
1412.23
180x200 mm dia
4
7299
1824.66
200x225 mm dia
1
2240
2240.49
225x250 mm dia
5
15270
3053.97
250x280 mm dia
5
21683
4336.68
e) TEES, 90mm dia 90x90x90 mm dia
1
495
495.36
110 mm dia 110X110X90 mm dia
2
1173
586.25
160 mm dia 160x160X90 mm dia
35
60060
1716
160 mm dia 160x160X110 mm dia
70
120120
1716
160 mm dia 160x160X160 mm dia
2
4195
2097.33
200 mm dia 200x200X160 mm mains
4
11596
2899
200 mm dia 200x200x110 mm dia
8
27408
3426
250 mm dia 250x250X110 mm dia
7
47775
6825
for scours, 160x160x110 mm dia
3
5148
1716
200x200x160 mm dia
2
5798
2899
F) Bends 90mm dia
4
1818
454.46
110 mm dia
5
3005
601.02
160 mm da
2
3488
1743.99
200 mm da
1
3390
3390.27
250 mm da
1
6595
6595.35
90deg Elbow DN 315mm O-PVC
7
133174
19024.83
45deg Elbow DN 315mm O-PVC
5
68129
13625.85
G) Flange Socket O-PVC, 315 mm
8
65151
8143.92
315 mm dia for Air TEEs
2
16288
8143.92
H) Sliding Coupler O-PVC, 315
5
57938
11587.59
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete, 90mm dia
1657
85915
51.85
110 mm dia
5035
304869
60.55
160 mm dia
1646
145227
88.23
200 mm dia
600
76638
127.73
250 mm dia
994
146188
147.07
Lowering, laying, jointing and testing to hydralic test pressure including cost of water with minimum water lead of 500m for PVC-O pressure pipes in ready made trenches true to alignment and gradient including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials as per BIS No. 7634 - Part III - 1975. 315mm dia OPVC
3406
219415
64.42
Supply and delivery of DI Pipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities.DIDF pipes for scour valves and sluice valves, 100X2.00m on 160 dia mains for scours
6
33922
5653.6
100x1.00m long DF pipes for sluice valves
16
69734
4358.39
150X2.00m on 200 mm dia mains for scours
4
37373
9343.34
150X2.00m on 250 mm dia mains for scours
4
37373
9343.34
150x1.00m long DF pipes for sluice valves
12
83162
6930.16
250x1.00m long DF pipes for sluice valves
2
24290
12144.87
supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 80mm distrubution valves
2
23538
11768.98
100 mm distrubution valves
8
122952
15368.95
150mm dia for distrubution valves
6
145192
24198.65
200mm dia for distrubution valves
1
35555
35554.85
250mm dia for distrubution valves
1
45341
45340.58
for scour, 100mm dia on 160 mm dia mains scour valves
3
46107
15368.95
150 mm dia on 200 mm dia lines scour valves
2
48397
24198.65
150 mm dia on 250 mm dia lines scour valves
2
48397
24198.65
Labour charges for Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces, 80mm distrubution valves
2
331
165.63
100 mm distrubution valves
8
1760
219.94
150mm dia for distrubution valves
6
2237
372.77
250mm dia for distrubution valves
1
874
873.96
for scour, 100mm dia on 160 mm dia mains scour valves
3
660
219.94
150 mm dia on 200 mm dia lines scour valves
2
746
372.77
150 mm dia on 250 mm dia lines scour valves
2
746
372.77
Construction of sluice and scour Valve Chamber as per type design drawing with RCC M 20 Design mix including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work , 80mm distrubution valves
2
42833
21416.69
100 mm distrubution valves
8
241452
30181.56
150mm dia for distrubution valves
6
181089
30181.56
for scour, 100mm dia on 160 mm dia mains scour valves
3
90545
30181.56
150 mm dia on 200 mm dia lines scour valves
2
60363
30181.56
150 mm dia on 250 mm dia lines scour valves
2
60363
30181.56
Lowering the D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.DIDF pipes for scour valves and sluice valves, 100mm
28
2280
81.44
150mm dia
28
3725
133.03
250mm dia
2
518
259.16
HOUSE SERVICE CONNECTIONS - Providing of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like electro Fusion Ferrule Tapping saddle with SS-304 insert, Compression male/female threaded adaptor with SS insert , Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, restoration of the road cutting portions with backfill material with full compaction as per type design and as directed by departmental officer for finished item of work, 90 x 1/2"
601
1030571
1714.76
110 x 1/2"
2132
3747928
1757.94
B0RE WELLS AND MOTORS Clearance of jungle by using Front end loader machine and clearing of all plastic material and wet silt and other deletarious materials and dispolal up to a lead of 50m as directer by the departmental .
400
1456
3.64
Bailing out water from the trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper upto 5HP capacity pumps - 1 HP/Hr. LAB-00655 ( As per SSR)
160
11290
70.56
Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely.
The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,Drilling of Bore well 350/450mm dia for insertion of pipe dia of 160/175/200 mm
136
210038
1544.4
Cost and supply of 175 mm dia PVC blue casing pipe per RN3 item 9 p below GL 68.00+above GL 1.00=69.00m
138
175917
1274.76
Slotting charges for 175 mm dia PVC blue casing pipe per RM item 9 p
138
57621
417.54
Supply & Fixing of 180 mm dia PVC Bore Cap per 1No item 9 p 117
2
716
357.89
Supply, & delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation to any where in A.P and as directed by the Engineer-In-Charge(63mm dia. HDPE 12.5 Kg/sqcm)
138
33396
242
Geological Survey Charges excluding taxes item 10 p 117
2
2520
1260
Supply and Transportation of 40HP 10-20 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha
2
300000
150000
Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1No. Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.For 40 HP with Automatic Star Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH.
2
60000
30000
Providing, laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets including transportaiton and painting with two coats of red oxide paint and one coat of post office red enamel paint and all labour charges and cost of all accessories etc., complete.
Makes: As per list of recommended brands.150mm dia - B Class MS Pipe, 48m + 2m above GL + 10m,
120
348617
2905.14
Supply of 3 Core…………ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990.
Makes: As per list of recommended brands as category I 16.0 Sq mm X 3.0core (below GL 50m+50m + above GL 2m + upto panel board 20m) or say 75.00m, As per SSR
250
110250
441
Construction of bore well platform of 1.85 m dia and 3.00 m length drain and foot rest of 1.00 x LOU m with CC (1:2:4) using20 mm H8G metal including cost and conveyance of all materials labour charges, centering, curing, seigniorage charges &excluding taxes etc., complete as per UNICEF type design.
2
20996
10498.03
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
39.88
5069
127.1
Filling with sand in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
15.22
15957
1048.45
Providing PCC 1:4:8 using 20 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete
3.12
14368
4605.17
Providing PCC 1:3:6 using 20 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete
3
17493
5831.03
Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix concrete, Column footing
4.73
48359
10223.82
Pedestals
0.55
5897
10722.59
Columns
1.65
21419
12981.51
Plinth beam 5.23/2=2.615
1.55
19545
12609.74
Lintel beams
0.85
11196
13171.25
Roof Beams
2.38
27768
11667.23
Roof slab 0.125m thick,
28.16
39861
1415.52
Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end
3.78
4130
1092.67
Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss - Ground floor
16.03
126023
7861.71
1st floor Parapet wall
2.21
18815
8513.56
Cement plastering using opc in cm(1:5) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside, Ground floor
144.09
57401
398.37
1st floor Parapet wall
25.58
11309
442.11
Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for ceiling
30.56
12069
394.93
Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for flooring
22.7
9486
417.89
Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
207.79
32446
156.15
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
3.15
15439
4901.35
Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
3
32763
10921.06
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
1414.15
129282
91.42
Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
150
18732
124.88
Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
19.46
4001
205.62
Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
0.21
93
440.83
Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps
12
3498
291.54
Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages
18
1779
98.85
Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
4
392
98.09
Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
8
5108
638.53
Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
2
734
366.97
supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges
10
679
67.86
supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
5
126
25.19
supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
100
6968
69.68
Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
1
4145
4144.76
S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going
1
6093
6093.2
Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
2
6894
3447
Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
2
416
208
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
2
3104
1552
Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.. Unit each
4
2648
662
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.BLD-ELEC-9.7.35
2
433
216.69
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete BLD-ELEC-9.7.36
2
1456
728.04
Fixing of 40W tube light luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete. BLD-ELEC-7-9-3
4
804
200.9
Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches.
749.07
95207
127.1
Providing bedding with dust for pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification and directed by the Engineer - in - Charge
53.51
50325
940.47
Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing) with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. 300 mm dia K9
594.5
3032675
5101.22
Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94., 300 mm dia K9
594.5
153054
257.45
Jointing the D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 , 300 mm dia K9
163
145041
889.82
Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewage conforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding GST, 300 mm dia 1.00m long DI DF pipe for non return valves
4
62429
15607.2
Supply, delivery of D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
994
149030
149.93
Manufacture, Supply and delivery of DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per IS:1538. Specification and Dimensions as per I.S 5312 or equivalent codes.PN 16, 300mm dia
1
92638
92638.32
Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
1
1244
1244.26
Lowering the D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-300mm dia
10
2987
298.73
Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 300mm dia
10
8898
889.82
RCC M-20 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
1.73
17425
10072.03
Construction of Valve chambers with CC M30 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S and for finished item of work. 1.3X1.3X1.40 mts
1
43555
43555.18
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work
104
9508
91.42
Total
-
32747091
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements