Police Housing Corporation Limited Tender

PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, SEIGNIORAGE CHARGES, INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, LIFTING (MANUAL) RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK (APSS.NO: 901&903) -FIRST FLOOR.

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work

SUPPLY AND FIXING OF UNPLASTICISED POLY VINLY CHLORIDE(UPVC) SLIDING WINDOWS THREE TRACK-TWOGLASS SHUTTERS SLIDING AND ONE MESH SHUTTER-80-SERIES DULY MANUFACTURED USING UPVC REINFORCED PROFILES OF 80MMX52MMX2.25MM FOR OUTER FRAMES,54MMX38MMX2.25MM FOR SLIDING SHUTTER FRAMES CAPABLE OF MOULTING SINGLE GLAZING SYSTEM STRUCTURALLY REINFORCED WITH HOT DIP GALVANIZED UP TO 50 MICRONS OF MINIUM THICKNESS OF 1.2 MM PREFABRICATED & WELDED THROUGH FUSION WELDING. THE WINDOW SASH SHALL BE FITTED WITH 5MM THICK CLEAR FLOAT GLASS OF REPUTED MAKE AND MESH SHUTTER FRAME SHALL NE 52MM X 21.5MM X 2 MM FITTED WITH NYLON/POLYMER MESH ON ROLLERS/ PULLEY DULY FIXED WITH EPDM WEATHERING SEAL RESISTANT ACCESSORIES LIKE CLIPPING LOCKING SYSTEM MADE OF ALUMINIUM, 1 NO. PER SET OF SASHES AND THE SYSTEM IS TO BE INSTALLED AT THE SITE USING ANCHOR FASTENERS, SILICON RUBBER SEALANT, EASY GLAZING/ DEGLAZING AT SITE ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, ACCESSORIES, LABOUR CHARGES FOR TRANSPORTATION, ERECTION AT SITE WITH TEMPLATES FOR CASEMENT SIZING COMPLETE FOR FINISHED ITEM OF WORK.

Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, .GROUND FLOOR

Providing dadooing to internal walls with glazed ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work,

PAINTING WITH EXTERIOR EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR TO THE EXTERIOR FACES OF WALLS AS DIRECTED 2 COATS BY DILUTING 1 LIT. OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS. (TOTAL 2 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, BRUSHES, LABOUR CHARGES, CURING, SCAFFOLDING AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK IN ALL FLOORS. (APSS NO.908).

SUPPLYING AND LAYING RAIN WATER DOWN TAKE PIPES WITH 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

INTERNAL WATER SUPPLY AND SANITARY ARRANGEMENTS

SUPPLY AND LAYING OF ASHIRVAD/ AJAY/ ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS ( COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOW GUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER( IS 15778-2007) -22.20 MM OD PIPES- SDR 13.5(RATE VIDE S.NO. BMW-I.221 OF SSR 2018-19 + OVERHEADS).

SUPPLY AND LAYING OF ASHIRVAD/ AJAY/ ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS ( COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOW GUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER( IS 15778-2007) -28.60 MM OD PIPES- SDR 13.5 (RATE VIDE S.NO. BMW-I.222 OF SSR 2018-19 + OVERHEADS).

SUPPLY AND LAYING OF ASHIRVAD/ AJAY/ ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS ( COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOW GUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER( IS 15778-2007) -41.30 MM OD PIPES- SDR 13.5(RATE VIDE S.NO. BMW-I.224 OF SSR 2018-19 + OVERHEADS).

PROVIDING AND PLACING ON TERRACE POLYTHELENE WATER STORAGE TANKS (AT ALL FLOOR LEVELS) DOUBLE LAYER APPROVED BRAND AND MANUFACTURE WITH COVER AND SUITABLE LOCKING ARRANGEMENTS MAKING NECESSARY HOLES FOR INLET & OUTLETS AND OVERFLOW PIPES BUT WITHOUT FITTINGS 7 BASE SUPPORT FOR TANKS, MAKING GOOD THE SAME TO ENSURE LEAK PROOF WITH AN APPROPRIATE MASONRY PLATFORM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER-IN-CHARGE.(RATE VIDE S.NO. BMW-G.01 OF SSR 2018-19 + OVERHEADS).

SUPPLYING AND FIXING GM GATE VALVE-25 MM DIA INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES ETC., COMPLETE.(RATE VIDE S.NO. BMW-F.17 OF SSR 2018-19 + OVERHEADS).

SUPPLYING AND FIXING GM GATE VALVE-40 MM DIA INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES ETC., COMPLETE.(RATE VIDE S.NO. BMW-F.25 OF SSR 2018-19 + OVERHEADS).

SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 160 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND JOINTING WITH SOLVENT CEMENT INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY AND FIXING IN POSITION 584.2MM LONG ORRISA PAN WITH 100 MM 'P' OR 'S' TRAP INCLUDING PROVIDING BRICK MASONARY SEAT USING 2 ND CLASS BRICKS AS PER STANDARD PRACTICE, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.

INTERNAL ELECTRICAL ARRANGEMENTS

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Supply and run of 1 of 22/0.3mm (1.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

SUPPLY OF 1200 MM (48") SWEEP 230V, A.C 50 HZ.CEILING FAN WITH 3 BLADES AND DOUBLE BALL BEARINGS WITH ALL STANDARD ACCESSORIES WITHOUT SPEED REGULATOR. BAJAJ ELECTRA 50/ CROMPTON GREAVES HIGH SPEED PLUS MODEL.

LABOUR CHARGES FOR FIXING OF CEILING FAN AND REGULATOR INCLUDING TRANSPORTATION AND GIVING CONNECTIONS WITH TWIN CORE WIRE ETC., COMPLETE.

SUPPLY, TRANSPORTATION AND FIXING OF 20W, 2000 LUMENS, T8,1200MM LENGTH LED RETROFIT TUBE LIGHT, INPUT VOLTAGE AC 220 - 260 VOLTS WITH PF0.9, SURGE PROTECTION: 2KV,THD10%, WITH INBUILT DRIVER AND FROSTED COVER CCT: 3000K - 5700K, MINIMUM CRI70, .ETC., COMPLETE AS PER IS 10322 (PART 5/ SEC 1)..2012 MAKES: PHILLIPS / GE / CROMPTON / WIPRO / BAJAJ / HAVELLS / VIN / RENESOLA B) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

FIXING OF 20W LED TUBE LIGHT LUMINAIRE ON WALL / CEILING WITH ALL ACCESSORIES INCLUDING GIVING CONNECTIONS AND ALL LABOUR CHARGES ETC., COMPLETE.

(RUPEES TWELVE LAKHS TWENTY ONE THOUSAND FOUR HUNDRED AND TWENTY EIGHT ONLY)