Police Housing Corporation Limited Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Police Housing Corporation Limited - APSPHCL Tender
Civil And Construction
Building Construction
Opening Date6 Feb 2025
Closing Date24 Feb 2025
Tender Amount₹ 1,43,94,790
Costs
EMD
₹ 1,44,000Document Cost
Refer DocumentsTender Fee
₹ 11,800
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
784153Tender No
A11/2024-25Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
RE-FILLING WITH EXCAVATED EARTH IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT. (APSS NO. 309 & 310)
450
38
17370
... More
FILLING WITH CARTED GRAVEL OBTAINED FROM APPROVED QUARRY IN LAYERS NOT EXCEEDING 15 CM THICK, IN BASEMENTS, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES, HIRE CHARGES OF T & P BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 309 & 310)
200
900
180080
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM & 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, EXCLUDING SEIGNIORAGE CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. BASEMENT WALLS 335 MM THICK.
39
7626
297429.6
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK GROUND FLOOR (APSS NO. 501&504).
61
8274
504726.2
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING, LIFT (MANUAL) AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK GROUND FLOOR UNSUPPORTED HEIGHTT FROM 3.66M TO 4.88M HT (APSS NO. 501&504).
4
8774
35099.2
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING , LIFT (MANUAL) AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FIRST FLOOR (APSS NO. 501&504).
42.6
8806
375148.38
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING, LIFT (MANUAL) AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK SECOND FLOOR (APSS NO. 501&504).
9
9338
84043.8
... More
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 110 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM ,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, EXCLUDING SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK GROUND FLOOR (APSS NO. 501&504).
11
9155
100713.8
... More
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 110 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM ,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORKINCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING, LIFT (MANUAL) AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK FIRST FLOOR (APSS NO. 501&504).
11
9956
109517.1
... More
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 110 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM ,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORKINCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING, LIFT (MANUAL) AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK SECOND FLOOR (APSS NO. 501&504).
5
10755
53779.5
... More
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN GROUND FLOOR (APSS NO: 402).
3
6475
19427.7
... More
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN FIRST FLOOR (APSS NO: 402).
5
6587
32937.5
... More
CEMENT CONCRETE (1:4:8) PROP. USING 40MM GRANITE METAL WITH CONCRETE MIXER INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, CENTERING Lifting ( Mannual) LAYING, ,CURING, FINISHING, EXCLUDING SEIGNIORAGE ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR DUMMY COLUMNS FOR FINISHED ITEM OF WORK.(APSS NO: 402). -SECOND FLOOR
3
7095
21285.6
... More
PLAIN CEMENT CONCRETE M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, [EXCLUDING SEIGNIORAGE CHARGES], INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE AND PROVIDING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC FOR FINISHED ITEM OF WORK. FOR FLOORING IN PARKING AREA, RAMP (APSS NO.403)
20
6758
135166
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FOOTINGS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
57
11237
640520.4
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PEDESTALS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
12
11807
141688.8
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PLINTH BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
28
13755
385159.6
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COLUMNS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
10
14304
143043
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COLUMNS - FOR UNSUPPORTED HEIGHT OF 3.66M TO 4.27M (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
0.5
14903
7451.8
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COLUMNS - FOR UNSUPPORTED HEIGHT OF 4.27M TO 4.88M (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
0.1
15502
1550.29
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR COLUMNS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
7
15065
105460.6
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR COLUMNS (HEAD ROOM) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
1
15826
15826
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR BEAMS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
10
12485
124851
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR BEAMS - FOR UNSUPPORTED HEIGHT OF 4.88M HT
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
7
14175
99231.3
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR BEAMS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
10
12997
129971
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR BEAMS (HEAD ROOM)
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
2
13507
27015.4
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS 125MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
23
12131
279015.3
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS 150MM THICK - UNSUPPORTED HEIGHT OF 4.88 M
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
17.1
12007
205321.41
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR SLABS 125MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
22.2
12628
280354.92
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR SLABS 125MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
3.4
13126
44628.4
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS 175MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
10
10879
108798
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR SLABS 175MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
3
11312
33937.2
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR CURTAIN WALL OF 200MM THICK STATIC WATER TANK
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
9
16670
150033.6
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR LINTELS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
4
13542
54170.4
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR LINTELS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
3
14532
43598.1
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP GROUND FLOOR (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
24
1192
28622.4
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP FIRST FLOOR (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
11
1249
13739
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR RACKS 38MM THICK - GROUND FLOOR
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
70
410
28700
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING, ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR RACKS 38MM THICK - FIRST FLOOR
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
40
426
17072
... More
PROVIDING AND FIXING FACTORY MADE UPVC WHITE COLOUR SLIDING GLAZED WINDOW UPTO 1.50 M IN HEIGHT DIMENSION, THREE TRACK THREE PANELS SLIDING WINDOW WITH FLY PROOF SS WIRE MESH (TWO NOS. GLAZED & ONE NO. WIRE MESH PANELS) MADE OF (SMALL SERIES) FRAME 92 X 44 MM & SASH 32 X 60 MM BOTH HAVING WALL THICKNESS OF 1.9 ± 0.2 MM AND SINGLE GLAZING BEAD OF APPROPRIATE DIMENSION (AREA OF WINDOW UPTO 1.75 SQM).COMPRISINGOF UPVC MULTI-CHAMBEREDFRAME WITH IN-BUILT ROLLER TRACK AND SASH EXTRUDED PROFILES DULY REINFORCEDWITH 1.60 ± 0.2 MM THICK GALVANIZED MILD STEEL SECTION MADE FROM ROLLFORMING PROCESS OF REQUIRED LENGTH (SHAPE & SIZE ACCORDING TO UPVC PROFILE), APPROPRIATE DIMENSION OF UPVC EXTRUDED GLAZING BEADS AND UPVC EXTRUDED INTERLOCKS, EPDM GASKET, WOOL PILE, ZINC ALLOY (WHITEPOWDER COATED) TOUCH LOCKS WITH HOOK, ZINC ALLOY BODY WITH SINGLE NYLONROLLERS (WEIGHT BEARING CAPACITY TO BE 40 KG), G.I FASTENERS 100 X 8 MMSIZE FOR FIXING FRAME TO FINISHED WALL AND NECESSARY STAINLESS STEEL SCREWSETC. PROFILE OF FRAME & SASH SHALL BE MITRED CUT AND FUSION WELDED AT ALLCORNERS, INCLUDING DRILLING OF HOLES FOR FIXING HARDWARE'S AND DRAINAGE OFWATER ETC. AFTER FIXING FRAME THE GAP BETWEEN FRAME AND ADJACENT INISHEDWALL SHALL BE FILLED WITH WEATHER PROOF SILICON SEALENT OVER BACKER ROD OFREQUIRED SIZE AND OF APPROVED QUALITY, ALL COMPLETE AS PER APPROVED DRAWING& DIRECTION OF ENGINEER-IN-CHARGE INCLUSIVE OF COST OF SINGLE / DOUBLE GLASS PANES, WIRE MESH AND SILICON SEALENT . NOTE: FOR UPVC FRAME AND SASH EXTRUDED PROFILES MINUS 5% TOLERANCEIN DIMENSION I.E. IN DEPTH & WIDTH OF PROFILE SHALL BE ACCEPTABLE.VARIATION IN PROFILE DIMENSION IN HIGHER SIDE SHALL BE ACCEPTED. BUT NO EXTRA PAYMENT ON THIS ACCOUNT SHALL BE MADE.
62
9900
613800
... More
PROVIDING AND FIXING FACTORY MADE UPVC WHITE COLOUR FIXED GLAZED WINDOWS / VENTILATORS COMPRISING OF UPVC MULTI CHAMBERED FRAME ANDMULLION (WHERE EVER REQUIRED) EXTRUDED PROFILES DULY REINFORCED WITH 1.60± 0.2 MM THICK GALVANIZED MILD STEEL SECTION MADE FROM ROLL FORMING PROCESS OF REQUIRED LENGTH (SHAPE & SIZE ACCORDING TO UPVCPROFILE),UPVC EXTRUDED GLAZING BEADS OF APPROPRIATE DIMENSION, EPDM GASKET,G.I FASTENERS 100 X 8 MM SIZE FOR FIXING FRAME TO FINISHED WALL, PLASTICPACKERS, PLASTIC CAPS AND NECESSARY STAINLESS STEEL SCREWS ETC. PROFILEOF FRAME SHALL BE MITRED CUT AND FUSION WELDED AT ALL CORNERS, MULLION (IFREQUIRED) SHALL BE ALSO FUSION WELDED INCLUDING DRILLING OF HOLES FOR FIXINGHARDWARE'S AND DRAINAGE OF WATER ETC. AFTERFIXING FRAME THE GAP BETWEENFRAME AND ADJACENT FINISHED WALL SHALL BE FILLED WITH WEATHER PROOF SILICONSEALANT OVER BACKER ROD OF REQUIRED SIZE AND OF APPROVED QUALITY, ALLCOMPLETE AS PER APPROVED DRAWING & DIRECTION OF ENGINEER-IN-CHARGE INCLUSIVE OF COST OF SINGLE / DOUBLE GLASS PANES AND SILICON SEALANT.FIXED WINDOWS / VENTILATORS MADE OF (SMALL SERIES) FRAME 47 X 50MM & MULLION 47 X 68 MM BOTH HAVING WALL THICKNESS OF 1.9 ±0.2 MM AND SINGLE GLAZING BEAD OF APPROPRIATE DIMENSION
19
7101
134930.4
... More
INTERNAL DOOR OF SIZE 1.06X 2.10M (SINGLE SHUTTER): SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON OTHER FACE INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 100 MM X 75MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 230X40X3MM, 4 NOS. OF 125 BUTT HINGES, 1 NO. DOOR STOPER, 2 NOS. 150 MM LONG DOOR HANDLES, 1 NO. ALDROP OF SIZE 300 MM LONG, 1 NO. ALDROP OF SIZE 250 MM LONG,2 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).
30
6101
183033
... More
TOILET DOOR: 0.75X2.10 M: SUPPLYING POSITIONING AND FIXING WPC SOLID DOOR SHUTTER OF 28MM THICK OF ECHON OR EQUIVALENT MAKE INCLUDING WPC DOOR FRAME MADE WITH WPS SCANTLINGS OF SIZE 100MM X 63 MM OF MAKE FUTURE PLY / WOOD PLUS / LIFE TIME , INCLUDING 6 NOS OF 'Z' HOLD FASTS OF SIZE 230 X 40 X 3MM , 4 NOS OF 125 MM BUTT HINGES, 2 NOS. 125MM LONG DOOR HANDLES, 1 NOS ALDROP OF SIZE 200 MM LONG, 1 NOS. of 200MM LONG TOWER BOLTS, WITH BOLTS, NUTS, NF SCREWS, INCLUDIMG CAST AND CONVEYANCE OF ALL MAERIALS TO SITE, LABOUR CHARES FOR MAKIN THE FRAMES, SHUTTER, MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHARG OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK (ALL FITTINGS AND FIXTURES SHOULD BE OF ALUMINIUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE). (APSS NO: 1001 &1002)
10
7672
76723
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, LIFT, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS NO: 901 & 904)
220
527
116116
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, LIFT, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR UNSUPPORTED HEIGHT OF 4.88M HEIGHT - GROUND FLOOR (APSS NO: 901 & 904)
150
594
89220
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, LIFTING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS NO: 901 & 904)
200
583
116660
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, LIFTING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SECOND FLOOR (APSS NO: 901 & 904)
30
638
19164
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK - GROUND FLOOR
140
423
59220
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK FOR UNSUPPORTED HEIGHT OF 4.80M HT- GROUND FLOOR
120
456
54732
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK FOR FIRST FLOOR
200
456
91220
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK FOR SECOND FLOOR
32
489
15654.4
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. BASEMENT WALLS (APSS NO: 901&904)
130
497
64727
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS NO: 901&904)
1200
510
612240
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE. FOR FINISHED ITEM OF WORK. GROUND FLOOR FOR UNSUPPORTED HEIGHTT OF 3.66M TO 4.88M HT (APSS NO: 901&904)
22
566
12460.8
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFT, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS NO: 901&904)
1030
561
578036
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFT, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. SECOND FLOOR (HEAD ROOM) (APSS NO: 901&904)
110
612
67331
... More
PROVIDING DADOOING TO INTERNAL WALLS WITH DIGITAL / POLISHED GLAZED FULL BODY PORCELAIN WALL TILES OF SIZE 300 X 600 MM WITH ANY TYPE OF DESIGN TEXTURE SUCH AS MARBLE FINISH, WOODEN, BAMBOO, STONE FINISHES ETC., SCRATCH LESS, STAIN FREE AND THICKNESS BETWEEN 6 - 8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, - GROUND FLOOR
55
900
49533
... More
PROVIDING DADOOING TO INTERNAL WALLS WITH DIGITAL / POLISHED GLAZED FULL BODY PORCELAIN WALL TILES OF SIZE 300 X 600 MM WITH ANY TYPE OF DESIGN TEXTURE SUCH AS MARBLE FINISH, WOODEN, BAMBOO, STONE FINISHES ETC., SCRATCH LESS, STAIN FREE AND THICKNESS BETWEEN 6 - 8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, - FIRST FLOOR
25
913
22832.5
... More
FLOORING WITH NON-SKID CERAMIC FLOOR TILES OF SIZE 300 X 300 MM AND THICKNESS BETWEEN 7-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR TOILETS.
45
1017
45805.5
... More
FLOORING WITH NON-SKID CERAMIC FLOOR TILES OF SIZE 300 X 300 MM AND THICKNESS BETWEEN 7-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR FIRST FLOOR TOILETS.
21
1068
22442.7
... More
FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK-GROUND FLOOR
178
1282
228231.6
... More
FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK-FIRST FLOOR
120
1333
159960
... More
PROVIDING SKIRTING TO INTERNAL WALLS / RISERS OF STEPS DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK GROUND FLOOR.
17
1290
21940.2
... More
PROVIDING SKIRTING TO INTERNAL WALLS / RISERS OF STEPS DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK FIRST FLOOR.
13
1341
17438.2
... More
FLOORING WITH HIGH POLISHED GRANITE 18-20 MM THICK SLABS BLACK COLOUR UPTO 2.43 MSET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, - GROUND FLOOR
19
3372
64073.7
... More
FLOORING WITH HIGH POLISHED GRANITE 18-20 MM THICK SLABS BLACK COLOUR UPTO 2.43 MSET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, - FIRST FLOOR
20
3466
69320
... More
HALF ROUNDING THE EDGES OF GRANITE SLAB AS DIRECTED BY THE ENGINEER-IN-CHARGE, INCLUDING POLISHING, ALL LABOUR CHARGES, HIRE CHARGES OF TOOLS AND PLANTS, INCIDENTAL & OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN ALL FLOORS
50
474
23715
... More
GRONOLITHIC CONCRETE FLOORING 20 MM THICK WITH (1:1:2), USING 6MM TO 12 MM SIZE HARD GRANITE MACHINE CRUSHED METAL LAID OVER CC BED ALREADY LAID OR RCC ROOF SLAB, IN ALTERNATE PANELS OF SIZE NOT EXCEEDING 1.50 M X 1.50 M AND FINISHING THE TOP SURFACE TO REQUIRED SMOOTHNESS AND SLOPES AND THREAD LINING INCLUDING COST OF ALL MATERIALS LIKE CEMENT, METAL, SAND AND WATER ETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK,
85
447
37995
... More
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK - INTERNAL WALLS.
2150
224
481600
... More
PAINTING TO NEW WALLS WITH 2 COATS OF PLASTIC EMULSION PAINT OF APPROVED BRAND AND SHADE OVER A BASE COAT OF APPROPRIATE PRIMER OF APPROVED BRAND, MAKING 3 COATS IN ALL TO GIVE AN EVEN SHADE AFTER THOURUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC. COMPLETE FOR FINISHED ITEM OF WORK AS PER SS 911 FOR INTERNAL WALLS
2150
179
386355
... More
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK- FOR EXTERNAL WALLS GROUND FLOOR
465
434
201903
... More
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK- FOR EXTERNAL WALLS FIRST FLOOR
465
439
204135
... More
PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK. ALL FLOORS (APSS NO:908)
930
266
247845
... More
PAINTING TO NEW WOOD WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF WOOD PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
75
240
18045
... More
PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
100
226
22630
... More
PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
22
87714
1929708
... More
SUPPLY AND FIXING MS GRILLS TO WINDOWS / VENTILATORS OF ALL SIZES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK. M.S SQUARE BARS OF ALL SIZES IN ALL FLOORS
1100
115
127270
... More
SUPPLY AND FIXING MS GRILLS TO WINDOWS / VENTILATORS OF ALL SIZES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK. M.S FLATS OF ALL SIZES IN ALL FLOORS
1000
120
120300
... More
SUPPLYING AND FIXING MS GRILLS FOR WINDOWS/VENTILATORS OF ALL SIZES AS DIRECTED BY THE ENGINEER-IN- CHARGE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES FOR FABRICATION, FIXING ETC., COMPLETE FOR THE FINISHED ITEM OF WORK M.S. TUBES OF ALL SIZES FOR HEAD ROOM PURLINS
250
166
41500
... More
PROVIDING ELEVATION BORDERS TO PARAPET WALLS AND DRIP COURSE TO SLAB PROJECTIONS WITH A SIZE OF 40X15MM THICK PLAIN CEMENT MORTAR BANDS IN CEMENT MORTAR (1:4) PROP INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE & LABOUR CHARGES ETC., (Excluding Seigniorage Charges), COMPLETE. FOR FINISHED ITEM OF WORK
500
58
29050
... More
SUPPLY AND FIXING OF STAINLESS STEEL RAILING USING STAINLESS STEEL TUBES, SECTIONS, PLATES, SHEETS, PIPES OF ALL SIZES & DIAMETERS OF 304 GRADE, INCLUDING FABRICATION AS PER APPROVED DESIGN USING STAINLESS STEEL WELDING RODS, BUFFING, POLISHING, LACQUER FINISHING, TO PRESENT SEAMLESS FINISH, ALL OTHER INCIDENTAL, OPERATIONAL CHRGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
260
707
183898
... More
PROVIDING ROOFING WITH 0.50 MM THICK GALVANIZED / PRE-PAINTED G.I PROFILED SHEETS FIXED TO THE PURLINS WITH 14 SIZE SELF DRILLING SCREWS WITH NEOPRENE WASHER. SIDE LAPS ARE STICHED WITH SELF TAPPING / DRILLING SCREWS. END LAPS ARE TO BE SEALED WITH 25 X 3 MM BUTYL TAPE. THE SHEETS ARE PROVIDED WITH ANTI CAPILLARY GROVE INCLUDING ALL INCIDENTAL & OPERATIONAL CHARGES COST AND CONVEYANCE OF ALL MATERIALS TO SITE ETC., COMPLETE FOR FINISHED ITEM OF WORK.
50
919
45980
... More
SUPPLYING AND LAYING RAIN WATER DOWN TAKE PIPES WITH 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
293
11720
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES SDR 13.5
60
103
6204
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5
40
149
5984
... More
SUPPLYING AND FIXING 15 MM DIA BIB TAP WITH FLANGE CHROMIUM PLATED JAQUAR MAKE QUEEN SERIES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
1815
18157
... More
SUPPLYING AND FIXING 12.70 MM DIA ANGLE STOP COCK (400 GRAMS)INDIAN MAKE, HEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
18
509
9163.8
... More
SUPPLYING AND FIXING 20 MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
904
3616.8
... More
SUPPLYING AND FIXING 25 MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
1292
5170
... More
SUPPLYING AND FIXING 76.2 MM (3") DIA UV RESISTANT UPVC SWR NAHANI TRAP WITH JALI OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
20
102
2046
... More
SUPPLYING AND FIXING 19.04 MM DIA, 609.60 MM LONG C.P TOWEL ROD WITH BRACKETS AND SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
10
426
4268
... More
SUPPLYING AND FIXING NP SOAP DISH HEAVY TYPE WITH NP SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.
10
257
2572
... More
BOXING OF NAHANI TRAPS IN RCC FLOORS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.
10
195
1958
... More
SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
476
19068
... More
SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
293
11720
... More
SUPPLYING AND LAYING 75 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
213
8540
... More
CONSTRUCTING 457.20 X 457.20 MM (1'-6" X 1'-6") BRICK MASONARY INSPECTION CHAMBER WITH CM (1:6) PROP. USING 2ND CLASS CLAY BRICKS OF 225MM THICK , AND FITTED WITH 457.2 X 457.2 MM (1'-6" X 1'-6") RCC COVER UP TO A DEPTH OF 914.4 MM (3'-0") AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION FOR FINISHED ITEM OF WORK.
14
1986
27812.4
... More
SUPPLY AND FIXING IN POSITION EUROPEAN TYPE WATER CLOSET OF BEST INDIAN MAKE WHITE GLAZED WITH 100 MM 'P' TRAP, PLASTIC SEAT AND LID FOR EUROPEAN WATER CLOSET AND BUFFERS AS PER IS 2548-1963 AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITYOF PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
8
4170
33362.4
... More
SUPPLYING AND FIXING INDIAN MAKE FLAT BACK WHITE GLAZED WASH HAND BASIN (HSW/PARRYWARE/NEYCER) IST QUALITY CONFIRMING TO IS: 2556-PART-4 :1972 OF SIZE 550 X 400MM SINGLE C.P. PILLAR COCK AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFIRMING TO IS : 2963-1979 AND FITTED WITH 15MM NOMINAL BORE CHROMIUM PLATED PILLAR TAP OF 1ST QUALITY INDIAN MAKE 400GRAMS SEICO/SENIOR/NICE/ESSO OR EQUIVALENT COMPLETE WITH STANDARD CI BRACKETS, AND PAINTING TO ALL IRON FITTINGS WITH 2 COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK. INCLUDING WOODEN BLOCK INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK
8
1989
15913.6
... More
SUPPLYING & FIXING WHITE GLAZED FLAT BACK HALF STALL URINALS 1ST QUALITY CONFORMING TO IS:2556-1995 WITH STANDARD C.P. SPREADER OF OVERALL SIZE 95 X 95 X 57 MM CONFORMING TO IS:2556-PART6, SEC-6-1974 FIXED WITH SCREWS COMPLETE INDIAN MAKE (HSW/PARRY/NEYCER) : 590 X 375 X 390 MMINCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
2
3720
7440.8
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
20
84
1694
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
20
50
1012
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
68
682
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
110
1100
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
19
198
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
14
143
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'T' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
132
1320
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR PLAIN SINGLE 'T' AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
60
605
... More
SUPPLYING AND FIXING BEST INDIAN MAKE 609.6X457.2mm T.V SHAPE MIRROR WITH PLASTIC FRAME MIRROR INCLUDING WOODEN BLOCKS, SCREWS ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
8
581
4649.6
... More
SUPPLYING AND FIXING BIBCOCK CUM HEALTH FAUCET WITH 1 M LONG TUBE AND WALL HOOK OF JAQUAR QUEEN SERIES, CHROME FINISH INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
4589
36719.2
... More
SUPPLY & FIXING ANGULAR STOP COCKS WITH WALL FLANGE JAQUAR MAKE QUEEN SERIES WITH 7 YEARS WARRANTY: CHROME PLATED INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
2
1881
3763.4
... More
SUPPLY & FIXING OF TOWEL COAT HOOK JAQUAR MAKE QUEEN SERIES , CHROME PLATEDFINISH INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
1
992
992.2
... More
SUPPLYING AND FIXING OF 18MM TO 20 MM THICK POLISHED BLACK GRANITE PARTITIOINS OF SIZE 4' 0" X 2' 0" FOR URINALS INCLUDING FULL ROUNDING THE EDGES , FIXING IN POSITION, POLISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES , OVERHEADS & CONTRACTORS PROFIT COMPLETE FOR FINISHED ITEM OF WORK FOR ALL FLOORS.
1
3255
3255.1
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 41.30 MM OD PIPES SDR 13.5
150
324
48675
... More
SUPPLYING AND FIXING 40MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
2644
10577.6
... More
SUPPLYING AND FIXING 40MM NB SIZE HORIZONTAL CHECK (NON RETURN) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
1
2303
2303.6
... More
PROVIDING AND PLACING ON TERRACE POLYTHELENE WATER STORAGE TANKS (AT ALL FLOOR LEVELS) DOUBLE LAYER APPROVED BRAND AND MNUFACTURE WITH COVER AND SUITABLE LOCKING ARRANGEMENTS MAKING NECESSARY HOLES FOR INLET & OUTLETS AND OVERFLOW PIPES BUT WITHOUT FITTINGS & BASE SUPPORT FOR TANKS, MAKING GOOD THE SAME TO ENSURE LEAK PROOF WITH AN APPROPRIATE MASONARY PLATFORM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC.,COMPLETE FOR FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER -IN- CHARGE.
3000
9
28800
... More
SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 160 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 6Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
909
36368
... More
CONSTRUCTING 914.40 MM ( 3'-0") DIA FLY ASH BRICK MASONARY MAN HOLE AS PER IS-4111:PART-1:1996 WITH CM (1:6) PROP. USING FLY ASH BRICKS OF 225MM THICK FROM APPROVED SOURCE HAVING A MINIMUM CRUSHING STRENGTH OF 5N/SQ.MM INCLUDING PLASTERING WIH CM(1:3) PROP. 12 MM THICK BOTH INSIDE AND OUTSIDE, FITTED WITH 20'' DIA RCC COVERS AND FRAMES, INCLUDING EXCAVATING PITS UP TO A DEPTH OF 914.4 MM (3'-0") IN ALL SORTS OF SOILS (EXCLUDING ROCK) AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION AND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, COST OF SEIGNIORAGE CHARGES ON ALL MATERIALS AND ALL INCIDENTAL AND OPERATIONAL, LABOUR CHARGES LIKE MIXING CEMENT MORTAR, CONSTRUCTING MASONRY, CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK AS PER STANDARD SPECIFICATION.
2
6947
13895.2
... More
CONSTRUCTION OF SLUDGE PITS (FOR TWIN PIT FLUSH TOILET SYSTEM) USING LOCALLY AVAILABLE RCM PRECAST WELL STEINING RINGS 6 NOS. 1.2M DIA AND 30 CM HEIGHT TO FORM ABOUT 1.5M DEEP SLUDGE PIT USING 30mm THICK SHAHABAD / CUDDAPAH TILE SPACERS IN BETWEEN RINGS INCLUDING EARTH WORK EXCAVATIONS IN ALL SOILS EXCEPT ROCK REQUIRING BLASTING COST AND CONVEYANCE OF RCM RINGS TO SITE, LAYING THEM IN GROUND OVER PCC ANGULAR BED OF (1:6:10) 230mmX100mm THICK FOR CIRCULAR RING PORTION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES AND SEALING THE TOP OF PIT WITH RCM PRECAST COVER 50mm THICK 1.2M DIA INCLUDING FIXING CHARGES WITH CM (1:3) LEAK PROOF AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES SUCH AS REFILLING SIDE WITH EXCAVATED EARTH ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE FOR FINISHED ITEM OF WORK.
1
8659
8659.6
... More
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point including cost of suitable size of modular metal box of the same make of switch including all labour charges etc., complete (Makes: Precision/Universal& Marudhar/VIP / Sudhakar).
300
136
40980
... More
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of makes concealed in wall with all required accessories including masonary work and labour charges etc., complete. (For circuit mains, power sockets and computer boards only)
(Makes: ISI MARK: Precision/Universal& Marudhar/VIP/ Sudhakar).
300
131
39450
... More
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.
(Makes: ISI MARK: Precision/Universal& Marudhar/VIP/Sudhakar).
600
108
65100
... More
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A one way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non Residential Buildings.
Wire Make: (Finolex/RR kabel/Havells) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom.
Switches & Cover frame Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/ L&T-englaze.
116
702
81432
... More
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A two way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for staircase light points in Non Residential Buildings.
Wire Make: (Finolex/RR kabel/Havells) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom.
Switches & Cover frame Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/ L&T-englaze.
2
1053
2106
... More
Supply and fixing of 6/10A 3/2 pin modular plug socket with 6/10A one way modular switch control on a common switch board covered with 3 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/ L&T-englaze.
11
426
4686
... More
Supply and Fixing of 16/20A Modular 1 way combi Socket with shutter and 16A / 20A 1 Way Modular Switch duly recessed in wall with 3 Modular Box and 3 modular cover frame including earth connections and all labour charges etc., complete. Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/ L&T-englaze.
9
751
6759
... More
Supply and fixing of 16/20A 1 way modular switch-1 no with 20A modular socket -1no and 6/10AA 3/2 pin modular plug socket - 3 nos with 6A 1 way modular switch - 3 nos with 12 Module box size covered with 12 module cover frame including earth connections and all labour charges etc., complete.(For computer switch board) Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/ L&T-englaze.
6
1728
10368
... More
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED, 490Lumens bulb (for new installation).
Holder Make: Anchor / Gold Medal Olive / Million Zoom
LAMP Make:Phillips / OSRAM / GE / Crompton.
9
230
2070
... More
Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. [for Earth lead to circuit mains, power sockets].
Make: Finolex/RR kabel/Havells / FortuneArrt
500
28
14000
... More
Supply and run of 3 of 36 /0.3mm (2.5 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for run of circuits, power plugs & computer boards including all labour charges etc., complete. ( For Phase Neutral and Earth) ( Circuit Mains to Switch Board)
Make:Finolex/RR kabel/Havells / FortuneArrt
200
136
27320
... More
Supply and run of 3 of 56/0.3mm (4 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.( For Phase Neutral and Earth) [from Distribution board mains to16A Sockets].
Make:Finolex/RR kabel/Havells / FortuneArrt
60
207
12450
... More
Supply and run of 5 of 56/0.3mm (4 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.( For Phase Neutral and Earth) [from mains to LDB].
Make:Finolex/RR kabel/Havells / FortuneArrt
20
345
6916
... More
Supply and fixing of modular socket type Telephone jack with Connector on 2 modular box and cover frame including giving connections, cost of all accessories and labour charges etc., complete. Make:Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero).
6
351
2106
... More
Supply and run of 5 Pair, 0.5mm telephone copper wire of makes Finolex / Delton / Polycab including all labour charges etc., complete.
120
47
5676
... More
Supply installation testing and commisioning of1no of Cat6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant
Makes: Systimax / Panduit/ Siemond/ Legrand
6
638
3828
... More
Supply and run of LAN Cable cat - 6 UTP cable in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete.
Makes:Systimax / Panduit / Siemond /Legrand
120
63
7620
... More
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter / min, but without Regulator including cost and conveyance of all materials etc. complete.
Makes: Crompton (HS PLus /HS) / Havells (ES PLS /SS390ES) / Orient Energy Star.
23
2672
61456
... More
Supply and erecting 2 Module Modular type Electronic step type Fan Regulator. complete erected on existing board.Make: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)
23
463
10651.3
... More
Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
23
240
5520
... More
Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete.
Makes: Phillips / GE-Venture / Crompton/ Wipro / Jaquar.
75
728
54615
... More
Supply of fresh air exhaust fan of light duty 250V A.C.50Hz../ 300mm size (12") 1350 R.P.M Metallic body plastic blades, wire mesh, etc., complete. Make Crompton/Bajaj Bahar WG/ Havells Ventil Air- DSP/ Orient hill air.
6
1938
11628
... More
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete.
6
712
4272
... More
Supply and fixing 6way TPN D.B with board with IP-43 protection suitable for three phase 40A FP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 18 Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.
Make: Legrand(Ekinox 3) / Schneider-A9 / Seimens / Lauritz Knudsen ( Formerly L&T)- Newrange. MCB Make: Legrand- DX3/ Scneider - A9/ Siemens - 5SX4 / Lauritz Knudsen ( Formerly L&T)- AU.
2
14054
28108
... More
Supply and transportation of 20W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's having System efficacy 110 lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution , THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete MAKE : Wirpo ( Skyline) / Philips Greem Line) / / GE Venture/ Crompton(Neo Series ) / Bajaj (Edge)
4
1863
7453.6
... More
Fixing of LED street light luminary with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete.
4
719
2876
... More
Supply and transportation of 100W LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass,Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 100lm/W and junction
temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥ 10KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete.
a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture/Crompton/Bajaj/Greenlites/Havells/Capart(Premium)/Halonix/Polycab/Keselec/HPL/Jaquar/Eveready/Surya (Lumasmax / O Flood) / FortuneArrt (Fin)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG.
1
9740
9740.5
... More
Fixing of MV / SV/MH luminaire on wall with 3Cx 2.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete.
1
747
747
... More
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
1
11974
11974
... More
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.
20
26
520
... More
Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)
Makes: Torent / Universal / Unicab / Havells.
50
189
9450
... More
Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated 10 Sqmm 4C XLPE aluminium conductor cable of 1100 volt grade as required of size.Makes:Dowels/Comet/SMI
2
113
226
... More
Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) for eath connections for the cables.
10
65
650
... More
Supply and errecting of Tripple Pole Neutral 415V 100A Busbar chamber as per IS:8623 Sheet Steel enclosure with copper Bars and Size of busbar chamber is 445X405X120mm etc., complete.including cost and conveyance of all materials and labour charges etc., complete.Make: Sputnik.
1
2000
2000
... More
Supply and errecting of Tripple Pole Sheet metal/iron clad switch approved make rewirable type 415V 63A with conduit entry errected an angle iron frame covered with 3mm thick white hylam sheet cover etc.,complete.including cost and conveyance of all materials and labour charges etc., complete.Makes: HPL / Havells / Standard / Indo Asian/Benlo
1
7253
7253
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%