Police Housing Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Police Housing Corporation Limited - APSPHCL Tender
Opening Date24 Dec 2020
Closing Date11 Jan 2021
Tender Amount₹ 3,01,87,736
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 10,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
366251Bid Award Id
ViewTender No
A107/2020-201Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
CIVIL WORK;VIBRATED REINFORCED CEMENT CONCRETE M - 25 DESIGN MIX CORRESPONDING TO TABLE 9 OF IS 456 USING GRADED 20MM SIZE (SS 5 ) HARD GRANITE MACHINE CRUSHED GRADED METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE AND COST OF [EXCLUDING SEIGNIORAGE CHARGES] AND ALL OPERATIONAL, INCIDENTAL AND ALL OTHER TAXES ON ALL MATERIALS AND ALL LABOUR CHARGES FOR STEEL CENTERING, SHUTTERING AND SCAFFIOLDING WITH STEEL PIPES AND STEEL PLATES AS PER THE APPROVED SHUTTERING PLAN AND OTHER ACCESSORIES AS PER NORMS AND STABILITY CALCULATIONS USING STEEL SCAFFOLDING PIPES , JACK PROPS AND STEEL CENTERING PLATES AND STAGING INCLUDING ALL BRACINGS , CROSS MEMBERS ETC., MACHINE MIXING WITH WEIGH BATCHING PLANT, LAYING CONCRETE, VIBRATING, LIFT CHARGES, CURING ETC., COMPLETE FOR UN SUPPORTED HEIGHT OF 3.66 M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK, FOR FIFTH FLOOR COLUMNS (APSS NO. 402 & 403)
70
-
982835
CIVIL WORK;VIBRATED REINFORCED CEMENT CONCRETE M - 25 DESIGN MIX CORRESPONDING TO TABLE 9 OF IS 456 USING GRADED 20MM SIZE (SS 5 ) HARD GRANITE MACHINE CRUSHED GRADED METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE AND COST OF [EXCLUDING SEIGNIORAGE CHARGES] AND ALL OPERATIONAL, INCIDENTAL AND ALL OTHER TAXES ON ALL MATERIALS AND ALL LABOUR CHARGES FOR STEEL CENTERING, SHUTTERING AND SCAFFIOLDING WITH STEEL PIPES AND STEEL PLATES AS PER THE APPROVED SHUTTERING PLAN AND OTHER ACCESSORIES AS PER NORMS AND STABILITY CALCULATIONS USING STEEL SCAFFOLDING PIPES , JACK PROPS AND STEEL CENTERING PLATES AND STAGING INCLUDING ALL BRACINGS , CROSS MEMBERS ETC., MACHINE MIXING WITH WEIGH BATCHING PLANT, LAYING CONCRETE, VIBRATING, LIFT CHARGES, CURING ETC., COMPLETE FOR UN SUPPORTED HEIGHT OF 3.66 M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK, FOR FIFTH FLOOR BEAMS (APSS NO. 402 & 403)
55
-
659378.5
CIVIL WORK;VIBRATED REINFORCED CEMENT CONCRETE M - 25 DESIGN MIX CORRESPONDING TO TABLE 9 OF IS 456 USING GRADED 20MM SIZE (SS 5 ) HARD GRANITE MACHINE CRUSHED GRADED METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE AND COST OF [EXCLUDING SEIGNIORAGE CHARGES] AND ALL OPERATIONAL, INCIDENTAL AND ALL OTHER TAXES ON ALL MATERIALS AND ALL LABOUR CHARGES FOR STEEL CENTERING, SHUTTERING AND SCAFFIOLDING WITH STEEL PIPES AND STEEL PLATES AS PER THE APPROVED SHUTTERING PLAN AND OTHER ACCESSORIES AS PER NORMS AND STABILITY CALCULATIONS USING STEEL SCAFFOLDING PIPES , JACK PROPS AND STEEL CENTERING PLATES AND STAGING INCLUDING ALL BRACINGS , CROSS MEMBERS ETC., MACHINE MIXING WITH WEIGH BATCHING PLANT, LAYING CONCRETE, VIBRATING, LIFT CHARGES, CURING ETC., COMPLETE FOR UN SUPPORTED HEIGHT OF 3.66 M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK, FOR FIFTH FLOOR SLABS OF 150MM THICK (APSS NO. 402 & 403)
200
-
2111640
CIVIL WORK;VIBRATED REINFORCED CEMENT CONCRETE M - 25 DESIGN MIX CORRESPONDING TO TABLE 9 OF IS 456 USING GRADED 20MM SIZE (SS 5 ) HARD GRANITE MACHINE CRUSHED GRADED METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE AND COST OF [EXCLUDING SEIGNIORAGE CHARGES] AND ALL OPERATIONAL, INCIDENTAL AND ALL OTHER TAXES ON ALL MATERIALS AND ALL LABOUR CHARGES FOR STEEL CENTERING, SHUTTERING AND SCAFFIOLDING WITH STEEL PIPES AND STEEL PLATES AS PER THE APPROVED SHUTTERING PLAN AND OTHER ACCESSORIES AS PER NORMS AND STABILITY CALCULATIONS USING STEEL SCAFFOLDING PIPES , JACK PROPS AND STEEL CENTERING PLATES AND STAGING INCLUDING ALL BRACINGS , CROSS MEMBERS ETC., MACHINE MIXING WITH WEIGH BATCHING PLANT, LAYING CONCRETE, VIBRATING, LIFT CHARGES, CURING ETC., COMPLETE FOR UN SUPPORTED HEIGHT OF 3.66 M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK, FOR FIFTH FLOOR SLABS OF 160MM THICK (APSS NO. 402 & 403)
6.5
-
67698.15
CIVIL WORK;VIBRATED REINFORCED CEMENT CONCRETE M - 25 DESIGN MIX CORRESPONDING TO TABLE 9 OF IS 456 USING GRADED 20MM SIZE (SS 5 ) HARD GRANITE MACHINE CRUSHED GRADED METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE AND COST OF [EXCLUDING SEIGNIORAGE CHARGES] AND ALL OPERATIONAL, INCIDENTAL AND ALL OTHER TAXES ON ALL MATERIALS AND ALL LABOUR CHARGES FOR STEEL CENTERING, SHUTTERING AND SCAFFIOLDING WITH STEEL PIPES AND STEEL PLATES AS PER THE APPROVED SHUTTERING PLAN AND OTHER ACCESSORIES AS PER NORMS AND STABILITY CALCULATIONS USING STEEL SCAFFOLDING PIPES , JACK PROPS AND STEEL CENTERING PLATES AND STAGING INCLUDING ALL BRACINGS , CROSS MEMBERS ETC., MACHINE MIXING WITH WEIGH BATCHING PLANT, LAYING CONCRETE, VIBRATING, LIFT CHARGES, CURING ETC., COMPLETE FOR UN SUPPORTED HEIGHT OF 3.66 M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK, FOR FIFTH FLOOR LINTELS (APSS NO. 402 & 403)
18
-
240870.6
CIVIL WORK;VIBRATED REINFORCED CEMENT CONCRETE M - 25 DESIGN MIX CORRESPONDING TO TABLE 9 OF IS 456 USING GRADED 20MM SIZE (SS 5 ) HARD GRANITE MACHINE CRUSHED GRADED METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE AND COST OF [EXCLUDING SEIGNIORAGE CHARGES] AND ALL OPERATIONAL, INCIDENTAL AND ALL OTHER TAXES ON ALL MATERIALS AND ALL LABOUR CHARGES FOR STEEL CENTERING, SHUTTERING AND SCAFFIOLDING WITH STEEL PIPES AND STEEL PLATES AS PER THE APPROVED SHUTTERING PLAN AND OTHER ACCESSORIES AS PER NORMS AND STABILITY CALCULATIONS USING STEEL SCAFFOLDING PIPES , JACK PROPS AND STEEL CENTERING PLATES AND STAGING INCLUDING ALL BRACINGS , CROSS MEMBERS ETC., MACHINE MIXING WITH WEIGH BATCHING PLANT, LAYING CONCRETE, VIBRATING, LIFT CHARGES, CURING ETC., COMPLETE FOR UN SUPPORTED HEIGHT OF 3.66 M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK, FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP - FIFTH FLOOR (APSS NO. 402 & 403)
155
-
188960.5
CIVIL WORK;VRCC M-20 GRADE DESIGN MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, [EXCLUDING SEIGNIORAGE CHARGES], SALES & OTHER TAXES ON ALL MATERIALS, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE AND PROVIDING CENTERING USING CASURINA BALLIES, BAMBOOS, WOODEN REAPERS, RUNNERS, WOOD POSTS, WALL PLATES, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR FIFTH FLOOR RACKS OF 25MM THICK (APSS NO.403)
250
-
60125
CIVIL WORK;PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED. FOR ALL FLOORS
70
-
4305840
CIVIL WORK;PROVIDING "MILD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 250 GRADE AS PER IS 1786 - 1979) FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED. FOR ALL FLOORS
5
-
290235
CIVIL WORK;ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., HT OF 3.66 M COMPLETE FOR FINISHED ITEM OF WORK. FIFTH FLOOR (APSS NO: 901 & 904)
1300
-
606060
CIVIL WORK;PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. FIFTH FLOOR (APSS NO: 901&904)
4500
-
1948050
CIVIL WORK;PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, SEIGNIORAGE CHARGES, EXCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 901 & 903) - FOR FIFTH FLOOR
1360
-
612136
CIVIL WORK;FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK- FIFTH FLOOR
740
-
1107484
CIVIL WORK;PROVIDING SKIRTING TO INTERNAL WALLS WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS AS DIRECTED BY THE ENGINEER-IN-CHARGE IN LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK GROUND FLOOR
40
-
53348
CIVIL WORK;FLOORING WITH HIGH POLISHED GRANITE 16 TO 18 MM THICK UP TO 2.43 M BLACK COLOUR SET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, INCLUDING [EXCLUDING SEIGNIORAGE CHARGES], LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, BUT EXCLUDING THE COST OF CONVEYANCE OF ALL MATERIALS - FOR FIFTH FLOOR
340
-
1140836
CIVIL WORK;PROVIDING SKIRTING TO INTERNAL WALLS /RISERS OF STEPS WITH HIGH POLISHED GRANITE SLABS 16 TO 18 MM THICK UP TO 8'-00 (2.43 M) BLACK, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE POLISHED GRANITE STONE, CEMENT, SAND AND WATER LIFTING (MANNUAL), ETC., COMPLETE INCLUDING [EXCLUDING SEIGNIORAGE CHARGES], ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR FIFTH FLOOR
60
-
184578
CIVIL WORK;FLOORING WITH NON-SKID CERAMIC FLOOR TILES OF SIZE 300 X 300 MM AND THICKNESS BETWEEN 7-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR FIFTH FLOOR
60
-
62760
CIVIL WORK;PROVIDING DADOOING TO INTERNAL WALLS WITH GLAZED CERAMIC WALL TILES OF SIZE 200 X 300 MM / 245 MM X 325 MM AND THICKNESS 6 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE INCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR FIFTH FLOOR
160
-
93488
CIVIL WORK;SUPPLY AND FIXING DOORS AS PER DRAWINGS FABRICATED FROM SECTIONS MADE OF GALVANISED STEEL POWEDERED COATED FRAME OF SECTION 100MM X 65 MM AND ISI MARKED FLUSH DOOR SHUTTERS OF 35 MM THICK SINGLE SHUTTER WITH BOND WOOD SOLID BLOCK BOARD TYPE CORE HAVING CROSS BANDS AND FACE VENEERS, HOT PRESSED BONDED WITH WATER PROOF PHENOL FORMALDEHYDE SYNTHETIC RESIN FACTORY MADE CONFORMING TO IS 2202-1991 (PART-I) ONE SIDE TEAK VENEER AND OTHER SIDE COMMERCIAL PLY WITH INTERNAL LIPPING ON ALL SIDES INCLUDING COST AND CONVEYANCE TO SITE OF FLUSH SHUTTER INCLUDING SUPPLY AND INCLUDING COST OF ISI MARKED ALUMINIUM FIXTURES OF 3 NOS. BUTT HINGES (IS:205) 150MM LONG, 1 NO. ALDROP (IS:2681) 300MM LONG, 1 NO. TOWER BOLT (IS:204) OF 200 MM X 10 MM DIA AT TOP , 2 NOS. 150 MM LONG HANDLES (IS:208), 1 NO. DOOR STOPPER AND 1 NO. RUBBER / NYLON DOOR STOP BUSHES INCLUDING FIXING THE FIXTURES TO DOOR WITH REQUIRED NUMBER OF SCREWS, BOLT AND NUTS INCLUDING LABOUR CHARGES FOR FIXING THE FRAME IN POSITION, FIXING THE SHUTTER TO THE FRAME ETC., INCLUDING OVERHEADS & CONTRACTORS PROFIT COMPLETE FOR FINISHED ITEM OF WORK AS PER APSS 1001 & 1002 (THE VERTICAL FRAME OF DOOR SHALL BE EMBEDDED IN FLOORING FOR A DEPTH OF NOT LESS THAN 10 MM) (1000MM X 2100MM) FOR ALL FLOORS
80
-
422574.62
CIVIL WORK;PROVIDING & FIXING OF OPENABLE WINDOWS WITH FLY-MESH MADE OF PRE-PAINTED STEEL (BASE STEEL AS PER IS 513 OF 0.58 MM THICK GALVANIZED AS PER IS 277 WITH ZINC OF 150 GSM) PRIMER COATED WITH EPOXY PRIMER OF 5-7 MICRONS THICK, FINISH PAINTED WITH A POLYESTER PAINT OF 12-16 MICRONS THICK AND BACK COATED WITH 5-7 MICRONS THICK ALKYD BACKER AND THE SECTION FOR OUTER FRAME OF 72 X 55MM, CENTRE MULLION OF 72 X 50MM, SECTION FOR FIXED GLASS BEADING SECTION OF 12 X 12 MM AND SECTION FOR SHUTTERS OF 48 X 25 MM AND OUTER FRAME & MULLION SECTIONS WITH REBATE FOR GLAZED SHUTTERS, FLY MESH AND A 20 MM PROVISION FOR GUARD BARS/GRILLS AND FLY MESH SHUTTER SECTION OF 20 X 40 MM AND THE SECTIONS CUT TO LENGTH METRE JOINED WITH CORNER BRACKET, CENTRE MULLIONS FIXED WITH MULLION CAP, STAY, HANDLES, LATCH 2 NOS OF HEAVY DUTY STAINLESS STEEL PIVOT HINGES PER SHUTTER AND PANELLED WITH 4MM THICK PIN HEADED GLASS AND S.S. MESH FOR FLY MESH SHUTTER (304 GRADE), FITTED USING RUBBER GASKETS INCLUDING FIXING THE WINDOWS IN THE CONCRETE/MASONRY WALL BY MEANS OF SELF EXPANDING SCREWS, INCLUDING 10MM SQUARE GUARD BARS WITH 6? (152.4MM) PITCH INCLUDING OVERHEADS AND CONTRACTOR PROFIT ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR 1.80 X 1.20 MT. FOR ALL FLOORS. (BMT-P.25)
150
-
956505
CIVIL WORK;PROVIDING AND FIXING OF TOP HUNG VENTILATORS MADE OF PREPAINTED STEEL (BASE STEEL AS PER IS 513 OF 0.80 MM THICK GALVANIZED AS PER IS 277 WITH ZINC OF 120 GSM), FINISH PAINTED WITH A POLYESTER PAINT OF 60-65 MICRONS THICK AND SECTION FOR OUTER FRAME OF 80 X 45 MM, CENTRE MULLION OF 80 X 60 MM, SECTION FOR SHUTTER OF 52 X 25 MM X 0.6 MM THICK, OUTER FRAME AND MULLIONS TO HAVE REBATE FOR GLAZED SHUTTER WITH A PROVISION FOR GUARD BARS/GRILLS AND THE SECTIONS CUT TO LENGTH METRE JOINED WITH CORNER BRACKET, CENTRE MULLION FIXED WITH MULLION CAP, 1 NO. OF HIGH GRADE NYLON LATCH HANDLE, WINDOW STOPPER, 2 NOS. OF WITH MS POWDER COATED /SS BALL BEARING BUTT HINGES PROVIDED PER SHUTTER AND WINDOWS FITTED WITH 4 MM THICK PLAIN FLOAT GLASS WITH RUBBER GASKETS INCLUDING FIXING THE FRAMES IN CONCRETE/MASONRY WALL BY MEANS OF SELF EXPANDING SCREWS, INCLUDING 10 MM SQUARE GUARD BARS WITH 6? (152.4MM) PITCH ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR ALL FLOORS
25
-
104417.5
CIVIL WORK;TOILET DOOR: 0.85X2.10 M: SUPPLYING POSITIONING AND FIXING WPC SOLID DOOR SHUTTER OF 28MM THICK OF ECHON OR EQUIVALENT MAKE INCLUDING WPC DOOR FRAME MADE WITH WPS SCANTLINGS OF SIZE 100MM X 63 MM OF MAKE FUTURE PLY / WOOD PLUS / LIFE TIME , INCLUDING 6 NOS OF 'Z' HOLD FASTS OF SIZE 230 X 40 X 3MM , 4 NOS OF 100 MM BUTT HINGES, 2 NOS. 125MM LONG DOOR HANDLES, 1 NOS ALDROP OF SIZE 200 MM LONG, 2 NOS. of 200MM LONG TOWER BOLTS, WITH BOLTS, NUTS, NF SCREWS, INCLUDIMG CAST AND CONVEYANCE OF ALL MAERIALS TO SITE, LABOUR CHARES FOR MAKIN THE FRAMES, SHUTTER, MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHARG OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK (ALL FITTINGS AND FIXTURES SHOULD BE OF ALUMINIUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE). (APSS NO: 1001 &1002)
35
-
173316.5
CIVIL WORK;PAINTING TO NEW WALLS WITH 2 COATS OF PLASTIC EMULSION PAINT OF APPROVED BRAND AND SHADE OVER A BASE COAT OF APPROPRIATE PRIMER OF APPROVED BRAND, MAKING 3 COATS IN ALL TO GIVE AN EVEN SHADE AFTER THOURUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC. COMPLETE FOR FINISHED ITEM OF WORK AS PER SS 911 FOR INTERNAL WALLS FOR ALL FLOORS
3300
-
463650
CIVIL WORK;PAINTING WITH EXTERIOR EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR TO THE EXTERIOR FACES OF WALLS AS DIRECTED 2 COATS BY DILUTING 1 LIT. OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF EXTERIOR WALL PRIMER BY DILUTING 1 LIT. OF PRIMER WITH 1 LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, BRUSHES, LABOUR CHARGES, CURING, SCAFFOLDING AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK IN ALL FLOORS. (APSS NO.908)
3000
-
612300
CIVIL WORK;PAINTING TO NEW WOOD WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF WOOD PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
300
-
56910
CIVIL WORK;SUPPLY AND FIXING OF STAINLESS STEEL RAILING USING STAINLESS STEEL TUBES, SECTIONS, PLATES, SHEETS, PIPES OF ALL SIZES & DIAMETERS OF 304 GRADE, INCLUDING FABRICATION AS PER APPROVED DESIGN USING STAINLESS STEEL WELDING RODS, BUFFING, POLISHING, LACQUER FINISHING, TO PRESENT SEAMLESS FINISH, ALL OTHER INCIDENTAL, OPERATIONAL CHRGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL FLOORS
250
-
135900
CIVIL WORK;SUPPLYING AND LAYING RAIN WATER DOWN TAKE PIPES WITH 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
150
-
39735
CIVIL WORK;SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 15.90 MM OD PIPES SDR 13.5
30
-
1749
CIVIL WORK;SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES SDR 13.5
75
-
7012.5
CIVIL WORK;SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5
50
-
6765
CIVIL WORK;SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 34.90 MM OD PIPES SDR 13.5
30
-
6369
CIVIL WORK;SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 41.30 MM OD PIPES SDR 13.5
25
-
7315
CIVIL WORK;SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 54.00 MM OD PIPES SDR 13.5
100
-
48070
CIVIL WORK;SUPPLYING AND FIXING 12.70 MM DIA NP BIB TAP 300 GMS INDIAN MAKE HEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
35
-
8809.5
CIVIL WORK;SUPPLYING AND FIXING 12.70 MM DIA NP BIB TAP 400 GMS INDIAN MAKE HEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
20
-
7806
CIVIL WORK;SUPPLYING AND FIXING 12.70 MM DIA ANGULAR STOP COCK 400 GRAMS INDIAN MAKE HEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
25
-
11457.5
CIVIL WORK;SUPPLYING AND FIXING 12.70 MM DIA CONCELAED STOP COCK 400 GRAMS INDIAN MAKE HEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
16
-
8336
CIVIL WORK;SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
150
-
39735
CIVIL WORK;SUPPLYING AND LAYING 75 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
150
-
28725
CIVIL WORK;SUPPLY AND FIXING IN POSITION 584.2MM LONG ORISSA PAN WITH 100 MM 'P' OR 'S' TRAP INCLUDING PROVIDING BRICK MASONARY SEAT USING 2 ND CLASS BRICKS AS PER STANDARD PRACTICE, AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITY PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
5
-
14029.5
CIVIL WORK;SUPPLY AND FIXING IN POSITION EUROPEAN TYPE WATER CLOSET OF BEST INDIAN MAKE WHITE GLAZED WITH 100 MM 'P' TRAP, PLASTIC SEAT AND LID FOR EUROPEAN WATER CLOSET AND BUFFERS AS PER IS 2548-1963 AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITYOF PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE
13
-
48854
CIVIL WORK;SUPPLYING AND FIXING INDIAN MAKE FLAT BACK WHITE GLAZED WASH HAND BASIN (HSW/PARRYWARE/NEYCER) IST QUALITY CONFIRMING TO IS: 2556-PART-4 :1972 OF SIZE 550 X 400MM SINGLE C.P. PILLAR COCK AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFIRMING TO IS : 2963-1979 AND FITTED WITH 15MM NOMINAL BORE CHROMIUM PLATED PILLAR TAP OF 1ST QUALITY INDIAN MAKE 300GRAMS SEICO/ESSO OR EQUIVALENT COMPLETE WITH STANDARD CI BRACKETS INCLUDING WOODEN BLOCK AND PAINTING TO ALL IRON FITTINGS WITH 2 COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK.
18
-
32270.4
CIVIL WORK;SUPPLY AND FIXING WHITE GLAZED FLAT BACK HALF STALL URINALS OF 1 ST QUALITY CONFORMING TO IS2556-1995 WITH STANDARD CP SPREADER OF OVERALL SIZE 95X95X57 MM CONFORMING TO IS 2556-PART 6 ,SEC-6-1974 FIXED WITH SCREWS COMPLETRE INDIAN MAKE OF SIZE 590 X375 X390 MM INCLUDING 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, 38.10 MM C.P WASTE COUPLING, 38.10 MM PVC SOLID WASTE PIPE OUTLET, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
10
-
33546
CIVIL WORK;SUPPLYING AND FIXING NP SOAP DISH HEAVY TYPE WITH NP SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.
20
-
4628
CIVIL WORK;SUPPLYING AND FIXING BEST INDIAN MAKE 609.6X457.2mm T.V SHAPE MIRROR WITH PLASTIC FRAME MIRROR INCLUDING WOODEN BLOCKS, SCREWS ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
20
-
10454
CIVIL WORK;SUPPLYING AND FIXING 25.40 MM DIA, 609.60 MM LONG ALUMINIUM ANODIZED TOWEL ROD WITH BRACKETS AND SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
20
-
3406
CIVIL WORK;Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point including cost of suitable size of modular metal box of the same make of switch including all labour charges etc., complete (Makes: Sudhakar/VIP/GM
500
-
51150
CIVIL WORK;Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of makes concealed in wall with all required accessories including masonary work and labour charges etc., complete. (For circuit mains, power sockets and computer boards only) (Makes: Sudhakar/VIP/GM
750
-
73500
CIVIL WORK;Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. (Makes: Sudhakar/VIP/GM
1300
-
104520
CIVIL WORK;Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of concealed on underneath the flooring with all required accessories including masonary work and labour charges etc., complete.(Makes: ISI Mark Sudhakar /VIP/GM)
500
-
38550
CIVIL WORK;Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab including cost and conveyance of all materiaals and labour charges etc., complete
96
-
21696
CIVIL WORK;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A one way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non Residential Buildings. Wire Make: (Finolex/RR kabel/Havells) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom. Switches & Cover frame Make:Legrand Arteor/Carbtree Murano/GM-Zenova
452
-
266680
CIVIL WORK;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A two way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for staircase light points in Non Residential Buildings. Wires Wire Make: (Finolex/RR kabel/Havells) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom. Switches & Cover frame Make:Legrand Arteor/Carbtree Murano/GM-Zenova
4
-
3540
CIVIL WORK;Wiring with 2 of 14/0.3mm (1.0 Sq.mm)Fire Retardant low smoke FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6/10A one way modular switch control and 3/2 pin modular socket fixing on separate board with 3 module cover frame including all labour charges etc., complete. Wires Make:(Finolex/RR kabel/Havells) Switches & Cover frame Make: Legrand Arteor/Carbtree Murano/GM-Zenov.
150
-
77700
CIVIL WORK;Supply and fixing of 6/10A 3/2 pin modular plug socket with 6/10A one way modular switch control on a common switch board covered with 3 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenov.
52
-
21060
CIVIL WORK;Supply and Fixing of 20A 1Way two Modular Switch duly recessed in wall with 2 Modular Box and 2 modular cover frame of the same make including earth connections and all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova/
125
-
50375
CIVIL WORK;Supply and Fixing of 16/20A Modular Socket with shutter and 16A / 20A 1 Way Modular Switch duly recessed in wall with 3 Modular Box and 3 modular cover frame including earth connections and all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova/
6
-
4098
CIVIL WORK;Supply and fixing of 16/20A 1 way modular switch-1 no with 20A modular socket -1no and 6/10AA 3/2 pin modular plug socket - 3 nos with 6A 1 way modular switch - 3 nos with 12 Module box size covered with 12 module cover frame including earth connections and all labour charges etc., complete.(For computer switch board) Make: Legrand Arteor/Carbtree Murano/GM-Zenova
480
-
797760
CIVIL WORK;Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED, 490Lumens bulb (for new installation). Holder Make: Anchor / Gold Medal Olive / Million Zoom LAMP Make:Phillips / OSRAM / GE / Crompton.
100
-
22100
CIVIL WORK;Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLS/ ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. [for Earth lead to circuit mains, power sockets]. Make: Finolex/RR kabel/Havells
3050
-
67100
CIVIL WORK;Supply and run of 3 of 36/0.3mm (2.5 Sq.mm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains and for earth continuity inlcuding all labour charges etc., complete. Make: Finolex/RR Kabels/Havells
8500
-
958800
CIVIL WORK;Supply and run of 5 of 84/0.3mm (6 Sq.mm) FRLS /ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.[from Panel Board to LDB]. Make:Finolex/RR kabel/Havells
3000
-
1170000
CIVIL WORK;Supply and run of 5 of 14/0.3mm (10 Sq.mm) FRLS /ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.[from Panel Board to LDB]. Make:Finolex/RR kabel/Havells
3000
-
1528500
CIVIL WORK;Supply and fixing of modular socket type Telephone jack with Connector on 2 modular box and cover frame including giving connections, cost of all accessories and labour charges etc., complete. Make:Legrand Myrius/Carbtree Thames Platinum.
8
-
2504
CIVIL WORK;Supply and run of 2 Pair, 0.5mm telephone copper wire including all labour charges etc., complete. Makes: Finolex / Delton / Polycab
250
-
9600
CIVIL WORK;Supply installation testing and commisioning of 1no of Cat6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
500
-
240000
CIVIL WORK;Supply and run of LAN Cable cat - 6 UTP cable in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete. Makes:D Link / AMP / Molex / Legrand / Krone.
12500
-
576250
CIVIL WORK;Supply and fixing of Electronis musical bell including giving connections, cost of all accessories and labour charges etc., complete. Make: Anchor/ GM G Home/ Goldmedal Olive/ Million Zoom.
4
-
1312
CIVIL WORK;Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with double ball bearings without Regulatorincluding cost and conveyance of all materials and labour charges etc., complete. Makes: Crompton HS Decora / Havells ES Plus / Orient summer crown
100
-
255500
CIVIL WORK;Supply of 400w stepped type electronic regulator including cost and conveyance of materials and labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenov.
100
-
49500
CIVIL WORK;Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
100
-
18600
CIVIL WORK;Supply and transportation of 18W, 1800 lumens,T8,1200mm length LED patty type tube light, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete Makes: Phillips / GE / Crompton.
275
-
242000
CIVIL WORK;Fixing of 18W LED tube light luminaire on wall / Ceiling with all accessories including giving connections and all labour charges etc., complete.
275
-
41525
CIVIL WORK;Supply of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark including cost and conveyance of all materials and labour charges etc., complete. Makes: Crompton / Almounard / Havells Turbo Force.
16
-
48880
CIVIL WORK;Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete.
16
-
8816
CIVIL WORK;Supply and fixing 8way TPN D.B with board with IP-43 protection suitable for three phase 63A FP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 24 Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.(for DB) Make: Legrand(Ekinox 3) / Schneider-Acti9 / Havells/Indo Asain
14
-
187222
CIVIL WORK;Supply and fixing 8 way vertical-TPN D.B with board with IP-43 protection suitable for three phase 125A FP MCCB - 1 No for incomer, 40-63A TP MCBs - 8 Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete. Make: Legrand(Ekinox 3) / Schneider-Acti9 / Havells/Indo Asain
7
-
240065
CIVIL WORK;Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 2.5mtr. length connected with G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
4
-
70032
CIVIL WORK;Supply and Run of 25mm x 6mm Copper Strip including cost of all accessories and labour charges etc., complete.
100
-
45760
CIVIL WORK;Supply, Installation, Testing and Commissining of 35 Sqmm 3.5Core XLPE insulated, 1100V gradearmoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes: Torent / Universal / Unicab
200
-
55000
CIVIL WORK;Supply, Installation, Testing and Commissining of 50 Sqmm 3.5Core XLPE insulated, 1100V gradearmoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes: Torent / Universal / Unicab
100
-
35800
CIVIL WORK;Supply, Installation, Testing and Commissining of 240Sqmm 3.5Core XLPE insulated, 1100V gradearmoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes: Torent / Universal / Unicab
230
-
292330
CIVIL WORK;Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 sqmm to 400 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
400
-
150000
CIVIL WORK;Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) with No.10 SWG G.I wire for eath connections for the cables.
550
-
28600
CIVIL WORK;Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 3.5C X 35 sqmm size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size 3.5C X 35. Makes:Dowels/Comet/SMI
12
-
1980
CIVIL WORK;Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 3.5C X 50 sqmm size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size 3.5C X 50. Makes:Dowels/Comet/SMI
6
-
1056
CIVIL WORK;Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 3.5c x 240 of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.Makes:Dowels/Comet/SMI
2
-
1430
CIVIL WORK;Supply of down conductor of 1x70sqmm single core PVC insulated unarmoured copper conductor cable of ISI mark. Makes: Finolex / Polycab / Havells / RPG / RR Kabel/KEI/Gloster/Tamra
50
-
31625
CIVIL WORK;Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 4 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 6.9 kg, empty wt.2.9 kg, Discharge time minimum 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -3 A, B rating -34 B, can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete. Makes : Safex / Kenex / Bharat / Reliance/NewTech
8
-
33440
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements