Police Housing Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Police Housing Corporation Limited - APSPHCL Tender
Civil And Construction
Building Construction
Opening Date6 Feb 2025
Closing Date24 Feb 2025
Tender Amount₹ 1,62,34,937
Costs
EMD
₹ 1,63,000Document Cost
Refer DocumentsTender Fee
₹ 11,800
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
784177Tender No
A20/2024-25Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
FILLING WITH CARTED SAND IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT WITH INTIAL LEAD IN LAYERS NOT EXCEEDING 15 CM THICK, IN BASEMENTS, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, [EXCLUDING SEIGNiORAGE CHARGES], LABOUR CHARGES, HIRE CHARGES OF T & P ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 309 & 310)
80
2840
227208
... More
RANDAM RUBBLE MASONRY USING HARD GRANITE STONE IN CM(1:6) PROP. INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, [EXCLUDING SEIGNORAGE CHARGES],LABOUR CHARGES, CURING, ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR FOUNDATIONS AND BASEMENTS (APSS NO: 615).
30
5448
163455
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK GROUND FLOOR (APSS NO. 501&504).
45
9704
436689
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING, LIFT (MANUAL) AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FIRST FLOOR (APSS NO. 501&504).
45
10324
464620.5
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING, LIFT (MANUAL) AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK SECOND FLOOR (APSS NO. 501&504).
53
10945
580111.5
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING, LIFT (MANUAL) AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK THIRD FLOOR (APSS NO. 501&504).
15
11566
173493
... More
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 110 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM ,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, EXCLUDING SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORKINCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK GROUND FLOOR (APSS NO. 501&504).
7
10688
74817.4
... More
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 110 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM ,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, EXCLUDING SCAFFOLDING, LIFT (MANUAL) AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK FIRST FLOOR (APSS NO. 501&504).
10
11621
116217
... More
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 110 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM ,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, EXCLUDING SCAFFOLDING, LIFT (MANUAL) AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK SECOND FLOOR (APSS NO. 501&504).
11
12555
138105
... More
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN GROUND FLOOR (APSS NO: 402).
0.3
8442
2532.84
... More
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, LIFT (MANNUAL) FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN FIRST FLOOR (APSS NO: 402).
0.2
8573
1714.6
... More
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, LIFT (MANNUAL) FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN SECOND FLOOR (APSS NO: 402).
0.3
8703
2610.96
... More
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, LIFT (MANNUAL) FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN THIRD FLOOR (APSS NO: 402).
0.04
8833
353.34
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PLINTH BEAMS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
16
16260
260161.6
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COLUMNS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
9
17098
153886.5
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COLUMNS FOR UNSUPPORTED HEIGHT OF 3.66M TO 6.71M HEIGHT
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
6.2
19162
118804.4
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR COLUMNS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
2.8
17986
50363.32
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR COLUMNS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
6
18873
113242.8
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR THIRD FLOOR COLUMNS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
0.7
19762
13833.54
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR BEAMS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
8.5
14696
124921.95
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402)FOR GROUND FLOOR BEAMS UNSUPPORTED HEIGHT OF 3.66M TO 6.71M HT
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
6.5
17455
113462.83
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR BEAMS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
7.7
15294
117763.8
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR BEAMS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
7
15889
111227.9
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402)FOR THIRD FLOOR BEAMS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
2
16487
32974
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS 150MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-25 GRADE CONCRETE)
19
13463
255812.2
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402)FOR GROUND FLOOR SLABS 150MM THICK UNSUPPORTED HEIGHT OF 3.66M TO 6.71M HT
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-25 GRADE CONCRETE)
28
14334
401374.4
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR SLABS 150MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-25 GRADE CONCRETE)
19
13994
265903.1
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402)FOR SECOND FLOOR SLABS 150MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-25 GRADE CONCRETE)
20.5
14526
297783
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR SHUTTERING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR THIRD FLOOR SLABS 150MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-25 GRADE CONCRETE)
6.1
15057
91847.7
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR LINTELS
3
15729
47189.4
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR LINTELS
3
16432
49298.4
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR LINTELS
2.5
17135
42839.5
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR THIRD FLOOR LINTELS
0.4
15057
6022.8
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP GROUND FLOOR
8
1358
10865.6
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP FIRST FLOOR
10.2
1420
14486.04
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP SECOND FLOOR
5.2
1483
7715.24
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP THIRD FLOOR
1.1
1545
1700.16
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR RACKS OF 25MM THICK
27
308
8340.3
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR RACKS OF 25MM THICK
13
319
4158.7
... More
RCC M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LIFTING, LAYING CONCRETE, CURING ETC., COMPLETE , INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR RACKS OF 25MM THICK
2
330
661.6
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK - GROUND FLOOR
32
533
17068.8
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK - SECOND FLOOR
195
610
119047.5
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK - THIRD FLOOR
141
649
91523.1
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, LIFT (MANNUAL) ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS NO: 901 & 904)
106
646
68476
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, LIFT (MANNUAL), ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR UNSUPPORTED HEIGHT OF 3.66M TO 6.71M HEIGHT (APSS NO: 901 & 904)
220
730
160758.4
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, LIFT (MANNUAL), ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS NO: 901 & 904)
106
710
75344.8
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, LIFT (MANNUAL), ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SECOND FLOOR (APSS NO: 901 & 904)
110
775
85305
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, LIFT (MANNUAL) ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. THIRD FLOOR (APSS NO: 901 & 904)
30
840
25209
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. BASEMENT WALLS (APSS NO: 901&904)
180
612
110232
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS NO: 901&904)
560
626
350896
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFT, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE. FOR FINISHED ITEM OF WORK. GROUND FLOOR FOR UNSUPPORTED HEIGHTT OF 3.66M TO 6.71M HT (APSS NO: 901&904)
30
695
20853
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFT, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE. FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS NO: 901&904)
510
686
349911
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFT, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE. FOR FINISHED ITEM OF WORK. SECOND FLOOR (APSS NO: 901&904)
630
745
469665
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFT, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE. FOR FINISHED ITEM OF WORK. THIRD FLOOR (APSS NO: 901&904)
150
805
120750
... More
PROVIDING DADOOING TO INTERNAL WALLS WITH DIGITAL / POLISHED GLAZED FULL BODY PORCELAIN WALL TILES OF SIZE 300 X 600 MM WITH ANY TYPE OF DESIGN TEXTURE SUCH AS MARBLE FINISH, WOODEN, BAMBOO, STONE FINISHES ETC., SCRATCH LESS, STAIN FREE AND THICKNESS BETWEEN 6 - 8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, - GROUND FLOOR
72
951
68508
... More
PROVIDING DADOOING TO INTERNAL WALLS WITH DIGITAL / POLISHED GLAZED FULL BODY PORCELAIN WALL TILES OF SIZE 300 X 600 MM WITH ANY TYPE OF DESIGN TEXTURE SUCH AS MARBLE FINISH, WOODEN, BAMBOO, STONE FINISHES ETC., SCRATCH LESS, STAIN FREE AND THICKNESS BETWEEN 6 - 8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, - FIRST FLOOR
101
966
97596.3
... More
PROVIDING DADOOING TO INTERNAL WALLS WITH DIGITAL / POLISHED GLAZED FULL BODY PORCELAIN WALL TILES OF SIZE 300 X 600 MM WITH ANY TYPE OF DESIGN TEXTURE SUCH AS MARBLE FINISH, WOODEN, BAMBOO, STONE FINISHES ETC., SCRATCH LESS, STAIN FREE AND THICKNESS BETWEEN 6 - 8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, - SECOND FLOOR
60
981
58872
... More
FLOORING WITH NON-SKID CERAMIC FLOOR TILES OF SIZE 300 X 300 MM AND THICKNESS BETWEEN 7-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR.
13
1132
14726.4
... More
FLOORING WITH NON-SKID CERAMIC FLOOR TILES OF SIZE 300 X 300 MM AND THICKNESS BETWEEN 7-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR FIRST FLOOR.
21
1192
25034.1
... More
FLOORING WITH NON-SKID CERAMIC FLOOR TILES OF SIZE 300 X 300 MM AND THICKNESS BETWEEN 7-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR SECOND FLOOR.
15
1251
18769.5
... More
FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK-GROUND FLOOR
70
1402
98140
... More
FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK-FIRST FLOOR
61
1461
89139.3
... More
FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK-SECOND FLOOR
85
1520
129242.5
... More
FLOORING WITH HIGH POLISHED GRANITE 18-20 MM THICK SLABS BLACK REGULAR COLOUR UPTO 2.43 MSET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, - GROUND FLOOR
43
3579
153901.3
... More
FLOORING WITH HIGH POLISHED GRANITE 18-20 MM THICK SLABS BLACK REGULAR COLOUR UPTO 2.43 MSET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, - FIRST FLOOR
43
3688
158601.2
... More
FLOORING WITH HIGH POLISHED GRANITE 18-20 MM THICK SLABS BLACK REGULAR COLOUR UPTO 2.43 MSET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, - SECOND FLOOR
15
3797
56964
... More
FLOORING WITH HIGH POLISHED GRANITE 18-20 MM THICK SLABS BLACK REGULAR COLOUR UPTO 2.43 MSET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, - THIRD FLOOR
15
3906
58603.5
... More
PROVIDING SKIRTING TO INTERNAL WALLS / RISERS OF STEPS DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK GROUND FLOOR.
7
1405
9839.2
... More
PROVIDING SKIRTING TO INTERNAL WALLS / RISERS OF STEPS DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK FIRST FLOOR.
6
1464
8788.8
... More
PROVIDING SKIRTING TO INTERNAL WALLS / RISERS OF STEPS DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK SECOND FLOOR.
10
1524
15240
... More
PLAIN CEMENT CONCRETE M20 NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, [EXCLUDING SEIGNIORAGE CHARGES], INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE AND PROVIDING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC FOR FINISHED ITEM OF WORK. FOR FLOORING IN PARKING AREA, RAMP (APSS NO.403)
18
8645
155617.2
... More
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK - INTERNAL WALLS.
500
248
124250
... More
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK- FOR EXTERNAL WALLS GROUND FLOOR
280
485
135800
... More
PAINTING TO NEW WALLS WITH 2 COATS OF PLASTIC EMULSION PAINT OF APPROVED BRAND AND SHADE OVER A BASE COAT OF APPROPRIATE PRIMER OF APPROVED BRAND, MAKING 3 COATS IN ALL TO GIVE AN EVEN SHADE AFTER THOURUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC. COMPLETE FOR FINISHED ITEM OF WORK AS PER SS 911 FOR INTERNAL WALLS
1300
164
213980
... More
PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK. ALL FLOORS (APSS NO:908)
1000
301
301400
... More
PAINTING TO NEW WOOD WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF WOOD PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
82
272
22328.6
... More
PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
51
256
13071.3
... More
PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
20.2
90706
1832261.2
... More
PROVIDING AND FIXING FACTORY MADE UPVC WHITE COLOUR SLIDING GLAZED WINDOW UPTO 1.50 M IN HEIGHT DIMENSION, THREE TRACK THREE PANELS SLIDING WINDOW WITH FLY PROOF SS WIRE MESH (TWO NOS. GLAZED & ONE NO. WIRE MESH PANELS) MADE OF (SMALL SERIES) FRAME 92 X 44 MM & SASH 32 X 60 MM BOTH HAVING WALL THICKNESS OF 1.9 ± 0.2 MM AND SINGLE GLAZING BEAD OF APPROPRIATE DIMENSION (AREA OF WINDOW UPTO 1.75 SQM).COMPRISINGOF UPVC MULTI-CHAMBEREDFRAME WITH IN-BUILT ROLLER TRACK AND SASH EXTRUDED PROFILES DULY REINFORCEDWITH 1.60 ± 0.2 MM THICK GALVANIZED MILD STEEL SECTION MADE FROM ROLLFORMING PROCESS OF REQUIRED LENGTH (SHAPE & SIZE ACCORDING TO UPVC PROFILE), APPROPRIATE DIMENSION OF UPVC EXTRUDED GLAZING BEADS AND UPVC EXTRUDED INTERLOCKS, EPDM GASKET, WOOL PILE, ZINC ALLOY (WHITEPOWDER COATED) TOUCH LOCKS WITH HOOK, ZINC ALLOY BODY WITH SINGLE NYLONROLLERS (WEIGHT BEARING CAPACITY TO BE 40 KG), G.I FASTENERS 100 X 8 MMSIZE FOR FIXING FRAME TO FINISHED WALL AND NECESSARY STAINLESS STEEL SCREWSETC. PROFILE OF FRAME & SASH SHALL BE MITRED CUT AND FUSION WELDED AT ALLCORNERS, INCLUDING DRILLING OF HOLES FOR FIXING HARDWARE'S AND DRAINAGE OFWATER ETC. AFTER FIXING FRAME THE GAP BETWEEN FRAME AND ADJACENT INISHEDWALL SHALL BE FILLED WITH WEATHER PROOF SILICON SEALENT OVER BACKER ROD OFREQUIRED SIZE AND OF APPROVED QUALITY, ALL COMPLETE AS PER APPROVED DRAWING& DIRECTION OF ENGINEER-IN-CHARGE INCLUSIVE OF COST OF SINGLE / DOUBLE GLASS PANES, WIRE MESH AND SILICON SEALENT . NOTE: FOR UPVC FRAME AND SASH EXTRUDED PROFILES MINUS 5% TOLERANCEIN DIMENSION I.E. IN DEPTH & WIDTH OF PROFILE SHALL BE ACCEPTABLE.VARIATION IN PROFILE DIMENSION IN HIGHER SIDE SHALL BE ACCEPTED. BUT NO EXTRA PAYMENT ON THIS ACCOUNT SHALL BE MADE.
51
9900
504900
... More
PROVIDING AND FIXING FACTORY MADE UPVC WHITE COLOUR FIXED GLAZEDWINDOWS / VENTILATORS COMPRISING OF UPVC MULTI CHAMBERED FRAME AND MULLION (WHERE EVER REQUIRED) EXTRUDED PROFILES DULY REINFORCED WITH 1.60± 0.2 MM THICK GALVANIZED MILD STEEL SECTION MADE FROM ROLL FORMING PROCESS OF REQUIRED LENGTH (SHAPE & SIZE ACCORDING TO UPVCPROFILE),UPVC EXTRUDED GLAZING BEADS OF APPROPRIATE DIMENSION, EPDM GASKET,G.I FASTENERS 100 X 8 MM SIZE FOR FIXING FRAME TO FINISHED WALL, PLASTICPACKERS, PLASTIC CAPS AND NECESSARY STAINLESS STEEL SCREWS ETC. PROFILEOF FRAME SHALL BE MITRED CUT AND FUSION WELDED AT ALL CORNERS, MULLION (IFREQUIRED) SHALL BE ALSO FUSION WELDED INCLUDING DRILLING OF HOLES FOR FIXINGHARDWARE'S AND DRAINAGE OF WATER ETC. AFTERFIXING FRAME THE GAP BETWEENFRAME AND ADJACENT FINISHED WALL SHALL BE FILLED WITH WEATHER PROOF SILICONSEALANT OVER BACKER ROD OF REQUIRED SIZE AND OF APPROVED QUALITY, ALLCOMPLETE AS PER APPROVED DRAWING & DIRECTION OF ENGINEER-IN-CHARGE INCLUSIVE OF COST OF SINGLE / DOUBLE GLASS PANES AND SILICON SEALANT.FIXED WINDOWS / VENTILATORS MADE OF (SMALL SERIES) FRAME 47 X 50MM & MULLION 47 X 68 MM BOTH HAVING WALL THICKNESS OF 1.9 ±0.2 MM AND SINGLE GLAZING BEAD OF APPROPRIATE DIMENSION
5
7101
35508
... More
INTERNAL DOOR OF SIZE 1.06X 2.10M (SINGLE SHUTTER): SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON OTHER FACE INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 100 MM X 75MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 230X40X3MM, 4 NOS. OF 125 BUTT HINGES, 1 NO. DOOR STOPER, 2 NOS. 150 MM LONG DOOR HANDLES, 1 NO. ALDROP OF SIZE 300 MM LONG, 2 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).
20.1
6100
122620.05
... More
INTERNAL DOOR OF SIZE 0.90 X 2.10M (SINGLE SHUTTER): SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON OTHER FACE INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 100 MM X 75MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 230X40X3MM, 4 NOS. OF 125 BUTT HINGES, 1 NO. DOOR STOPER, 2 NOS. 150 MM LONG DOOR HANDLES, 1 NO. ALDROP OF SIZE 300 MM LONG, 2 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).
11.5
5653
65017.55
... More
TOILET DOOR: 0.75X2.10 M: SUPPLYING POSITIONING AND FIXING WPC SOLID DOOR SHUTTER OF 28MM THICK OF ECHON OR EQUIVALENT MAKE INCLUDING WPC DOOR FRAME MADE WITH WPS SCANTLINGS OF SIZE 100MM X 63 MM OF MAKE FUTURE PLY / WOOD PLUS / LIFE TIME , INCLUDING 6 NOS OF 'Z' HOLD FASTS OF SIZE 230 X 40 X 3MM , 4 NOS OF 125 MM BUTT HINGES, 2 NOS. 125MM LONG DOOR HANDLES, 1 NOS ALDROP OF SIZE 200 MM LONG, 1 NOS. of 200MM LONG TOWER BOLTS, WITH BOLTS, NUTS, NF SCREWS, INCLUDIMG CAST AND CONVEYANCE OF ALL MAERIALS TO SITE, LABOUR CHARES FOR MAKIN THE FRAMES, SHUTTER, MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHARG OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK (ALL FITTINGS AND FIXTURES SHOULD BE OF ALUMINIUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE). (APSS NO: 1001 &1002)
16
7679
122864
... More
DOOR OF SIZE 1.20X 2.10M (DOUBLE SHUTTERS) SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON OTHER FACE INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 100 MM X 75 MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 230X40X3 MM, 8 NOS. OF 125 MM BUTT HINGES, 2NO. HEAVY DUTY DOOR STOPERS, 4NOS. 150 MM LONG DOOR HANDLES, 1 NO. ALDROP OF SIZE 300 MM LONG ,3 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).
13
6330
82297.8
... More
ENTRANCE DOOR OF SIZE 1.50X 2.10M (DOUBLE SHUTTERS) SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON OTHER FACE INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 100 MM X 75 MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 230X40X3 MM, 8 NOS. OF 125 MM BUTT HINGES, 2NO. HEAVY DUTY DOOR STOPERS, 4NOS. 150 MM LONG DOOR HANDLES, 1 NO. ALDROP OF SIZE 300 MM LONG ,3 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).
3.2
6040
19328.96
... More
SUPPLY AND FIXING MS GRILLS TO WINDOWS / VENTILATORS OF ALL SIZES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK. M.S SQUARE BARS OF ALL SIZES IN ALL FLOORS
300
124
37290
... More
SUPPLY AND FIXING MS GRILLS TO WINDOWS / VENTILATORS OF ALL SIZES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK. M.S FLATS OF ALL SIZES IN ALL FLOORS
100
128
12880
... More
SUPPLYING AND LAYING RAIN WATER DOWN TAKE PIPES WITH 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
60
310
18624
... More
HALF ROUNDING THE EDGES OF GRANITE SLAB AS DIRECTED BY THE ENGINEER-IN-CHARGE, INCLUDING POLISHING, ALL LABOUR CHARGES, HIRE CHARGES OF TOOLS AND PLANTS, INCIDENTAL & OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN ALL FLOORS
160
525
84016
... More
SUPPLY AND FIXING OF STAINLESS STEEL RAILING USING STAINLESS STEEL TUBES, SECTIONS, PLATES, SHEETS, PIPES OF ALL SIZES & DIAMETERS OF 304 GRADE, INCLUDING FABRICATION AS PER APPROVED DESIGN USING STAINLESS STEEL WELDING RODS, BUFFING, POLISHING, LACQUER FINISHING, TO PRESENT SEAMLESS FINISH, ALL OTHER INCIDENTAL, OPERATIONAL CHRGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
400
743
297440
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 41.30 MM OD PIPES SDR 13.5
55
324
17847.5
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5
30
149
4488
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES SDR 13.5
50
103
5170
... More
SUPPLYING AND FIXING 12.70MM DIA CP SHORT BODY BIB COCK INDIAN MAKEHEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
12
660
7924.8
... More
SUPPLYING AND FIXING 12.70 MM DIA ANGLE STOP COCK (400 GRAMS)INDIAN MAKE, HEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
7
519
3639.3
... More
Supply of 25 MM PPR BALL VALVE conforming to DIN Standards 8077/8092NCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
6
236
1419
... More
Supply of 40 MM PPR BALL VALVE conforming to DIN Standards 8077/8092NCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
1
509
509.3
... More
SUPPLYING AND FIXING 76.2 MM (3") DIA UV RESISTANT UPVC SWR NAHANI TRAP WITH JALI OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
16
102
1636.8
... More
SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
50
528
26440
... More
SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
30
310
9312
... More
SUPPLYING AND LAYING 75 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
50
230
11545
... More
CONSTRUCTING 457.20 X 457.20 MM (1'-6" X 1'-6") BRICK MASONARY INSPECTION CHAMBER WITH CM (1:6) PROP. USING 2ND CLASS CLAY BRICKS OF 225MM THICK , AND FITTED WITH 457.2 X 457.2 MM (1'-6" X 1'-6") RCC COVER UP TO A DEPTH OF 914.4 MM (3'-0") AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION FOR FINISHED ITEM OF WORK.
7
2008
14057.4
... More
SUPPLYING AND FIXING INDIAN MAKE FLAT BACK WHITE GLAZED WASH HAND BASIN (HSW/PARRYWARE/NEYCER) IST QUALITY CONFIRMING TO IS: 2556-PART-4 :1972 OF SIZE 550 X 400MM SINGLE C.P. PILLAR COCK AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFIRMING TO IS : 2963-1979 AND FITTED WITH 15MM NOMINAL BORE CHROMIUM PLATED PILLAR TAP OF 1ST QUALITY INDIAN MAKE 400GRAMS SEICO/SENIOR/NICE/ESSO OR EQUIVALENT COMPLETE WITH STANDARD CI BRACKETS, AND PAINTING TO ALL IRON FITTINGS WITH 2 COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK. INCLUDING WOODEN BLOCK INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK
8
2068
16551.2
... More
SUPPLY AND FIXING IN POSITION 584.2MM LONG ORISSA PAN WITH 100 MM 'P' OR 'S' TRAP INCLUDING PROVIDING BRICK MASONARY SEAT USING 2 ND CLASS BRICKS AS PER STANDARD PRACTICE, AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITYOF PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE
2
3205
6410.4
... More
SUPPLY AND FIXING IN POSITION EUROPEAN TYPE WATER CLOSET OF BEST INDIAN MAKE WHITE GLAZED WITH 100 MM 'P' TRAP, PLASTIC SEAT AND LID FOR EUROPEAN WATER CLOSET AND BUFFERS AS PER IS 2548-1963 AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITYOF PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
7
4259
29817.2
... More
SUPPLYING & FIXING WHITE GLAZED FLAT BACK HALF STALL URINALS 1ST QUALITY CONFORMING TO IS:2556-1995 WITH STANDARD C.P. SPREADER OF OVERALL SIZE 95 X 95 X 57 MM CONFORMING TO IS:2556-PART6, SEC-6-1974 FIXED WITH SCREWS COMPLETE INDIAN MAKE (HSW/PARRY/NEYCER) : 590 X 375 X 390 MMINCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
7
3763
26344.5
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
9
84
762.3
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
50
202.4
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
11
110
1210
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
11
68
750.2
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'T' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
11
132
1452
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR PLAIN SINGLE 'T' AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
11
73
810.7
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'Y' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
174
1749
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR SINGLE 'Y' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
95
957
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
6
19
118.8
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
6
14
85.8
... More
SUPPLYING AND FIXING 25.4MM DIA ALUMINIUM TOWEL ROD 609.6MM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
200
1601.6
... More
SUPPLYING AND FIXING NP SOAP DISH HEAVY TYPE WITH NP SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.
8
260
2082.4
... More
SUPPLYING AND FIXING BEST INDIAN MAKE 609.6X457.2mm T.V SHAPE MIRROR WITH PLASTIC FRAME MIRROR INCLUDING WOODEN BLOCKS, SCREWS ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
8
610
4882.4
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 34.90 MM OD PIPES SDR 13.5
40
235
9416
... More
Supply of 32 MM PPR BALL VALVE conforming to DIN Standards 8077/8092NCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
2
249
499.4
... More
PROVIDING AND PLACING ON TERRACE POLYTHELENE WATER STORAGE TANKS (AT ALL FLOOR LEVELS) DOUBLE LAYER APPROVED BRAND AND MNUFACTURE WITH COVER AND SUITABLE LOCKING ARRANGEMENTS MAKING NECESSARY HOLES FOR INLET & OUTLETS AND OVERFLOW PIPES BUT WITHOUT FITTINGS & BASE SUPPORT FOR TANKS, MAKING GOOD THE SAME TO ENSURE LEAK PROOF WITH AN APPROPRIATE MASONARY PLATFORM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC.,COMPLETE FOR FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER -IN- CHARGE.
4000
9
39200
... More
SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 6Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
80
528
42304
... More
CONSTRUCTING 914.40 MM ( 3'-0") DIA FLY ASH BRICK MASONARY MAN HOLE AS PER IS-4111:PART-1:1996 WITH CM (1:6) PROP. USING FLY ASH BRICKS OF 225MM THICK FROM APPROVED SOURCE HAVING A MINIMUM CRUSHING STRENGTH OF 5N/SQ.MM INCLUDING PLASTERING WIH CM(1:3) PROP. 12 MM THICK BOTH INSIDE AND OUTSIDE, FITTED WITH 20'' DIA RCC COVERS AND FRAMES, INCLUDING EXCAVATING PITS UP TO A DEPTH OF 914.4 MM (3'-0") IN ALL SORTS OF SOILS (EXCLUDING ROCK) AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION AND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, COST OF SEIGNIORAGE CHARGES ON ALL MATERIALS AND ALL INCIDENTAL AND OPERATIONAL, LABOUR CHARGES LIKE MIXING CEMENT MORTAR, CONSTRUCTING MASONRY, CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK AS PER STANDARD SPECIFICATION.
8
6947
55580.8
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
1
19
19.8
... More
EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - OPEN EXCAVATIOIN FOR SEPTIC TANK (APSS 308).
21
313
6591.9
... More
CEMENT CONCRETE (1:5:10) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR SEPTIC TANK BED (APSS NO: 402).
2
6950
13900
... More
RE-FILLING WITH EXCAVATED EARTH IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR SEPTIC TANK (APSS NO. 309 & 310)
21
45
945
... More
RANDAM RUBBLE MASONRY USING HARD GRANITE STONE IN CM(1:6) PROP. INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, [EXCLUDING SEIGNORAGE CHARGES],LABOUR CHARGES, CURING, ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR FOUNDATIONS AND BASEMENTS (APSS NO: 615).
11
5448
59933.5
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING , LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR BAFFLE WALL BEAMS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
0.1
14696
1469.67
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING , LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SEPTIC TANK COVER SLAB OF 125MM THICK
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
1.2
14320
17185.08
... More
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR BAFFLE WALLS (APSS NO. 501&504).
0.25
9266
2316.6
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, EXCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK - FOR SEPTIC TANK
26.5
533
14135.1
... More
PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
0.13
90706
11791.78
... More
SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
3
310
931.2
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'T' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
1
132
132
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. SEPTIC TANK (APSS NO: 901&904)
16
612
9798.4
... More
EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - OPEN EXCAVATIOIN FOR SUMP(APSS 308).
55
313
17264.5
... More
CEMENT CONCRETE (1:5:10) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR SEPTIC TANK BED (APSS NO: 402).
2.5
6950
17375
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING , LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR BOTTOM SLAB OF 125MM THICK
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
1.9
14329
27226.43
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING , LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SUMP SIDE WALLS OF 200MM THICK
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
13.65
19633
267997.28
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING , LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SUMP BEAMS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
0.25
14835
3708.98
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING , LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SUMP COVER SLAB OF 150MM THICK
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
3.1
13603
42169.61
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK - FOR SUMP
112
533
59740.8
... More
PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
2.2
90706
199553.2
... More
DRILLING HOLES IN HARD GRANITE OR SHEET ROCKS 25MM DIA WITH PNEUMATIC COMPRESSOR AND GROUTING THE HOLES WITH NEAT CEMENT SLURRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE BUT COMPLETE COST OF STEEL FOR FINISHED ITEM OF WORK
240
341
81892.8
... More
EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - OPEN EXCAVATIOIN (APSS 308).
30
313
9417
... More
CEMENT CONCRETE (1:5:10) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR SEPTIC TANK BED (APSS NO: 402).
10
6950
69500
... More
RANDAM RUBBLE MASONRY USING HARD GRANITE STONE IN CM(1:6) PROP. INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, [EXCLUDING SEIGNORAGE CHARGES],LABOUR CHARGES, CURING, ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR FOUNDATIONS AND BASEMENTS (APSS NO: 615).
45
5448
245182.5
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING , LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PLINTH BEAMS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
7.5
16260
121950.75
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-20 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING , LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COLUMNS
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 350 Kgs FOR M-20 GRADE CONCRETE)
3
17098
51295.5
... More
SUPPLY AND FIXING MS GRILLS TO WINDOWS / VENTILATORS OF ALL SIZES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK. M.S FLATS OF ALL SIZES IN ALL FLOORS
400
128
51520
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. (APSS NO: 901&904)
312
612
191068.8
... More
PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
2
90706
181412
... More
SUPPLY AND FIXING HOT DIPPED GALVANISED IRON CHAIN LINK MESH 8 GUAGE (4 MM) AS PER IS:2721-1979 : 2" X 2" (50 X 50 MM) FIXED TO EXISTING M.S ANGLES WITH M.S FLATS, BOLTS, NUTS INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
391
466
182440.6
... More
PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
80
256
20504
... More
PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK. ALL FLOORS (APSS NO:908)
312
301
94036.8
... More
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point including cost of suitable size of modular metal box of the same make of switch including all labour charges etc., complete (Makes: Precision/Universal& Marudhar/VIP / Sudhakar).
500
148
74050
... More
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of makes concealed in wall with all required accessories including masonary work and labour charges etc., complete. (For circuit mains, power sockets and computer boards only)
(Makes: ISI MARK: Precision/Universal& Marudhar/VIP/ Sudhakar).
250
143
35750
... More
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.
(Makes: ISI MARK: Precision/Universal& Marudhar/VIP/Sudhakar).
750
117
87900
... More
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A one way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non Residential Buildings.
Wire Make: (Finolex/RR kabel/Havells) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom.
Switches & Cover frame Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/ L&T-englaze.
130
758
98540
... More
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A two way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for staircase light points in Non Residential Buildings.
Wire Make: (Finolex/RR kabel/Havells/FortuneArrt) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom.
Switches & Cover frame Make:Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)
6
1137
6822
... More
Supply and fixing of 6/10A 3/2 pin modular plug socket with 6/10A one way modular switch control on a common switch board covered with 3 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze.
20
446
8920
... More
Supply and Fixing of 16/20A Modular 1 way combi Socket with shutter and 16A / 20A 1 Way Modular Switch duly recessed in wall with 3 Modular Box and 3 modular cover frame including earth connections and all labour charges etc., complete. Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze.
8
794
6352
... More
Supply and fixing of 16/20A 1 way modular switch-1 no with 20A modular socket -1no and 6/10AA 3/2 pin modular plug socket - 3 nos with 6A 1 way modular switch - 3 nos with 12 Module box size covered with 12 module cover frame including earth connections and all labour charges etc., complete.(For computer switch board) Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze.. (for UPS)
6
1771
10626
... More
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED, 490Lumens bulb (for new installation).
Holder Make: Anchor / Gold Medal Olive / Million Zoom
LAMP Make:Phillips / OSRAM / GE / Crompton.
26
245
6370
... More
Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. [for Earth lead to circuit mains, power sockets].
Make: Finolex/RR kabel/Havells / FortuneArrt
600
30
18000
... More
Supply and run of 3 of 36 /0.3mm (2.5 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for run of circuits, power plugs & computer boards including all labour charges etc., complete. ( For Phase Neutral and Earth) ( Circuit Mains to Switch Board)
Make:Finolex/RR kabel/Havells / FortuneArrt
1000
143
143600
... More
Supply and run of 3 of 56/0.3mm (4 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.( For Phase Neutral and Earth) [from Distribution board mains to16A Sockets].
Make:Finolex/RR kabel/Havells / FortuneArrt
300
217
65370
... More
Supply and run of 5 of 84/0.3mm (6 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.( For Phase Neutral and Earth) [from mains to LDB].
Make:Finolex/RR kabel/Havells / FortuneArrt
120
363
43584
... More
Supply and fixing of modular socket type Telephone jack with Connector on 2 modular box and cover frame including giving connections, cost of all accessories and labour charges etc., complete. Make:Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero).
3
369
1107
... More
Supply and run of 5 Pair, 0.5mm telephone copper wire of makes Finolex / Delton / Polycab including all labour charges etc., complete.
60
49
2982
... More
Supply installation testing and commisioning of1no of Cat6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant
Makes: Systimax / Panduit/ Siemond/ Legrand
6
649
3894
... More
Supply and run of LAN Cable cat - 6 UTP cable in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete.
Makes:Systimax / Panduit / Siemond /Legrand
120
65
7908
... More
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter / min, but without Regulator including cost and conveyance of all materials etc. complete.
Makes: Crompton (HS PLus /HS) / Havells (ES PLS /SS390ES) / Orient Energy Star.
35
2672
93520
... More
Supply and erecting 2 Module Modular type Electronic step type Fan Regulator. complete erected on existing board.Make: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)
35
463
16208.5
... More
Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
35
277
9695
... More
Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete.
Makes: Phillips / GE-Venture / Crompton/ Wipro / Jaquar.
60
728
43692
... More
Supply of fresh air exhaust fan of light duty 250V A.C.50Hz../ 300mm size (12") 1350 R.P.M Metallic body plastic blades, wire mesh, etc., complete. Make Crompton/Bajaj Bahar WG/ Havells Ventil Air- DSP/ Orient hill air.
8
1938
15504
... More
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete.
8
820
6560
... More
Supply and fixing 6way TPN D.B with board with IP-43 protection suitable for three phase 63A FP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 12 Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.
Make: Legrand(Ekinox 3) / Schneider-A9 / Seimens / Lauritz Knudsen ( Formerly L&T)- Newrange. MCB Make: Legrand- DX3/ Scneider - A9/ Siemens - 5SX4 / Lauritz Knudsen ( Formerly L&T)- AU.
3
11443
34329
... More
Supply and transportation of 20W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's having System efficacy 110 lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution , THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete MAKE : Wirpo ( Skyline) / Philips Greem Line) / / GE Venture/ Crompton(Neo Series ) / Bajaj (Edge)
6
1863
11180.4
... More
Fixing of LED street light luminary with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete.
6
773
4638
... More
Supply and transportation of 100W LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass,Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 100lm/W and junction
temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥ 10KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete.
a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture/Crompton/Bajaj/Greenlites/Havells/Capart(Premium)/Halonix/Polycab/Keselec/HPL/Jaquar/Eveready/Surya (Lumasmax / O Flood) / FortuneArrt (Fin)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG.
1
9740
9740.5
... More
Fixing of MV / SV/MH luminaire on wall with 3Cx 2.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete.
1
821
821
... More
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
2
12138
24276
... More
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.
20
29
580
... More
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes: Universal / CCI / Unicab/Polycab
50
269
13475
... More
Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated 10 Sqmm 4C XLPE aluminium conductor cable of 1100 volt grade as required of size.Makes:Dowels/Comet/SMI
2
133
266
... More
Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) for eath connections for the cables.
10
72
720
... More
Supply and errecting of Tripple Pole Neutral 415V 100A Busbar chamber as per IS:8623 Sheet Steel enclosure with copper Bars and Size of busbar chamber is 445X405X120mm etc., complete.including cost and conveyance of all materials and labour charges etc., complete.Make: Sputnik.
1
2000
2000
... More
Supply and errecting of Tripple Pole Sheet metal/iron clad switch approved make rewirable type 415V 63A with conduit entry errected an angle iron frame covered with 3mm thick white hylam sheet cover etc.,complete.including cost and conveyance of all materials and labour charges etc., complete.Makes: HPL / Havells / Standard / Indo Asian/Benlo
1
7468
7468
... More
Supply and fixing of 40mm dia GI pipe ISI mark with fitting suitable for encasing the cable along pole including cost and conveyance of all materials etc., complete for finished item of work.
5
467
2337.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%