Police Housing Corporation Limited Tender

Dismantling, clearing away and carefully stacking materials for reuse -Removal of OLD CEMENT MORTAR PLASTER SSR 18-19 ITEM NO 759 BMT-S.08

REPAIRS TO LEAKY RCC ROOF: PROVIDING 50MM THICK WEATHER PROOF COURSE OF CC(1:1:2) USING 6MM TO 12MM SIZE HARD GRANITE METAL MIXED WITH INTEGRAL WATER PROOFING LIQUID ADMIXTURE AT 1 kg PER 50 KGS OF CEMENT AND PROVIDED WITH IMPERVIOUS COAT WITH 20MM THICK CEMENT MORTAR PLASTERING IN CM(1:3) PROP. MIXED WITH CEMENT MORTAR PLASTERING WITH INTEGRAL WATER PROOFING LIQUID ADMIXTURE @ 1kg per bag of cement INCLUDING COST COST AND CONVEYANCE OF ALL MATERIALS TO SITE, MIXING, LAYING, CURING, LABOUR CHARGES, SEIGNIORAGE CHARGES, LIFT CHARGES AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC, COMPLETE FOR FINISHED ITEM OF WORK AND AS DIRECTED BY THE ENGINEER-IN-CHARGE. GROUND FLOOR.

REPAIRS TO LEAKY RCC ROOF: DISMANTLING OLD CEMENT MORTAR PLASTER OVER TERRACE SLAB AND PROVIDING WITH 20MM THICK CEMENT MORTAR PLASTERING IN CM(1:3) PROP. MIXED WITH CEMENT MORTAR PLASTERING WITH INTEGRAL WATER PROOFING LIQUID ADMIXTURE INCLUDING COST COST AND CONVEYANCE OF ALL MATERIALS TO SITE, MIXING, LAYING, CURING, LABOUR CHARGES, SEIGNIORAGE CHARGES, LIFT CHARGES AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC, COMPLETE FOR FINISHED ITEM OF WORK AND AS DIRECTED BY THE ENGINEER-IN-CHARGE. GROUND FLOOR.

CLEAN REMOVAL OF OLD PLASTER FROM WALLS AND RAKING OUT JOINTS AND PATCH PLASTERING TO WALLS IN CM (1:4) PROP. 20MM THICK INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING CHARGES, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE. FOR FINISHED ITEM OF WORK - GROUND FLOOR

REMOVAL OF DAMAGED WC AND SUPPLYING AND FIXING IN POSITION 584.20MM (23") LONG INDIAN PATTERN INDIAN MAKE WHITE GLAZED WC OF ANY 1SI MAKE AS APPROVED BY EE WITH A PAIR OF RECTANGULAR PORCELAIN FOOT RESTS 100MM P OR S TRAP WITH (1:3:6) CEMENT CONCRETE BED USING 20MM GAUGE HARD GRANITE METAL AROUND THE PAN INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.

INTERNAL DOOR: FLUSH DOOR SHUTTER: SUPPLY AND FIXING OF 30 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH COMMERCIAL PLY ON BOTH FACES INCLUDING 4 NOS. OF 125 MM BUTT HINGES, 1 NO. DOOR STOPER, 2 NOS. 150 MM LONG DOOR HANDLES, 2 NO. ALDROP OF SIZE 300 MM LONG, 1 NOS. OF 300 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).

PVC TOILET DOOR OF SIZE 0.85 X 2.10 M: S&F OF (A) DOOR FRAME MADE OUT OF PVC MATERIAL CONFORMING TO IS:10151:1982. THE DOOR FRAME SHALL BE MADE FROM EXTRUDED PVC SECTION IN OVERALL DIMENSIONS OF 40 X 48 MM HAVING WALL THICKNESS OF 1.1MM +/-0.3MM WITH USUAL PROCESS VARIATION CORRESPONDING TO SINTEX CODE NUMBER RUPS 414. THE FRAME SHALL BE REINFORCED WITH SPECIAL POLYMERIC REINFORCEMENT AS SHOWN IN DRAWING TO TAKE UP NECESSARY HARDWARE. THE CORNER JOINT SHALL BE MITRE CUT AND WELDED OR JOINED BY MEANS OF CONCEALED CLEATS WITH NECESSARY SCREWS FITTINGS. A TIE ROD TO BE PROVIDED AT BOTTOM. [LAMINATED PROFILE] (B) THE SHUTTER FRAME MADE OUT OF PVC EXTRUDE SECTION HAVING OVERALL DIMENSIONS OF 59 X 24 MM WITH WALL THICKNESS OF 1.0MM +/-0.3MM WITH USUAL PROCESS VARIATION CORRESPONDING TO THE SINTEX CODE NO.DWUF-302. THE SHUTTER FRAME IS GIVEN TAPERED SHAPE TO PROVIDE BETTER GRIP TO THE INFILL PANEL AND TO DRAIN OUT THE WATER. THE INFILL PANEL IS MADE OUT OF SEAMLESS ONE PIECE MULTI CHAMBERED PVC EXTRUDED SECTION HAVING OVERALL DIMENSION OF 610 X 20 MM WITH WALL THICKNESS OF 1MM +/-0.2MM WITH USUAL PROCESS VARIATION CORRESPONDING TO THE SINTEX CODE NO.SPUF-128. THE SHUTTER FRAME SHALL BE MITRE CUT AND JOINED AT THE CORNER POLYMERIC “L’ TYPE CORNERS SHALL BE PROVIDED AT THE CORNERS TO TAKE UP HARDWARE & FIXTURES AND SHALL BE FIXED WITH 19 X 8MM COUNTER SUNK-FULLY THREADED PARALLEL SHANK STEEL SCREWS. ALL THE HARDWARE LOCATIONS SHALL BE REINFORCED WITH SPECIAL POLYMERIC BARS.THE DOOR FRAME SHALL BE FIXED TO THE WALLBY USING 80 MM LONG SCREWS THROUGH THE FRAME WITH THE HELP OF PVC FASTENERS. HARDWARE MADE OUT OF STEEL COATED BUTTERFLY HINGES - 3 NOS. FOR EACH SHUTTER AND ISI MAKE HANDLES, TOWER BOLTS, ALDROPS SHALL BE PROVIDED AS DIRECTED BY THE ENGINEER-IN-CHARGE FOR THE FINISHED ITEM OF WORK.

PROVIDING SPECIALISED STRUCTURAL REPAIRS TO RCC SLAB CEILING BY CHIPPING AND REMOVING OF EXISTING DAMAGED CONCRETE LAYER BY WIRE BRUSH AND EMERY PAPER AND CLEANING THE SURFACE FROM DUST USING WATER AND THE FOLLOWING 1) APPLICATION OF PWER GUARD TREATMENT ( STEEL WILL BE SUPPLIED BY THE DEPARTMENT) 2) APPLYING POLYMER BONDING AGENT TO THE RCC CEILING SURFACE USING POWER BOND PB/ITE BOND AR ETC., 3) APPLYING POLYMER CEMENT MORTAR ON AVERFAGE 30MM THICK IN TWO LAYERS AT (1:4) PROP. RATDIO BY ;MIXING WITH AN ACRYLIC POLYMER CEMENTLITIOUS COMPOUND LIKE CONPOWER AR / NITO BRAND BR FINISHING AND COST AND CONVEYANCE OF ALL MATAERIALS TO SITE, LABOUR CHARGES ETC., COMPLTE ( CORRESPONDING CHEMICALS FOR FOSROC/ESSAR / SIKA OR PMCC MAKES SHOULD BE USED AT THE PROPERTIES PRESCRIBED BY THE MANUFACTURER AFTER TAKING PRIOR APPROVAL OF ENGINEER-IN-CHARGES FOR ALL FLOORS.

INTERNAL /EXTERNAL SANITARY AND WATER SUPPLY ARRANGEMENTS

SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES SDR 13.5

SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5

SUPPLYING AND LAYING 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 12.70 MM DIA NP BIB TAP INDIAN MAKE HEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING GUN METAL GATE (GM PEET) VALVE AS PER IS -778 CLASS-1 INDIAN MAKE HEAVY TYPE OF 20 MM NB SIZE 1st QUALITY, WITH ALL NECESSARY FITTINGS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.A=40 B=30 G=30 T=15

SUPPLYING AND FIXING OF GI UNION INDIAN MAKE HEAVY TYPE OF 25MM NB SIZE 1ST QUALITY , WITH ALL NECESSARY FITTINGS NICLUDIONG COST AND CONVEYANCE OF ALL MATERIALS TO SITE LABOUR CHARGES ETC., COMPLETE

Brick masonry Chamber for gully trap or peet valves fitted with CI frame & Hinged Cover

SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND LAYING 75 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

INTERNAL/EXTERNAL ELECTRICAL ARRANGEMENTS

Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with double ball bearings without Regulatorincluding cost and conveyance of all materials and labour charges etc., complete. Makes: Crompton HS Decora / Havells ES Plus / Orient summer crown

Supply of 400w stepped type electronic regulator including cost and conveyance of materials and labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenov.

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supply and transportation of 18W, 1800 lumens,T8,1200mm length LED patty type tube light, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete Makes: Phillips / GE / Crompton.

Fixing of 18W LED tube light luminaire on wall / Ceiling with all accessories including giving connections and all labour charges etc., complete.

Supply and transportation of 60W LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass,Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 100lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥ 10KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete. MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj (S.NO.158,ELEC-3.8.23.d, SSR 2018-19)

Fixing of MV / SV/MH luminaire on wall with 3Cx 2.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete.

SUPPLY AND RUN OF 2 OF 10 SQ.MM WPSC ALUMINIUM CABLE ALONG WITH NO.10 SWG G.I BEARER WIRE THROUGH PVC CLEATS WITH ALL ACCESSORIES INCLUDING LABOUR CHARGES ETC., COMPLETE FOR SERVICE MAINS. MAKE: GOLD MODEL/MILLION/PAYAL/GM.

Supply and run of 2 of 56/0.3mm (4 Sq.mm) FRLS /ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.[from Distribution boards to A/C points and mains to LDB]. Make:Finolex/RR kabel/Havells