Police Housing Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Police Housing Corporation Limited - APSPHCL Tender
Coronavirus COVID 19
Opening Date10 Jan 2020
Closing Date28 Jan 2020
Tender Amount₹ 2,17,86,305
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 10,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
308569Bid Award Id
ViewTender No
A375/2019-20Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
RE-FILLING WITH EXCAVATED EARTH IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT. (APSS NO. 309 & 310)
315
-
42
FILLING WITH CARTED GRAVEL OBTAINED FROM APPROVED QUARRY IN LAYERS NOT EXCEEDING 15 CM THICK, IN BASEMENTS, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, (Excluding Seigniorage Charges), LABOUR CHARGES, HIRE CHARGES OF T & P ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 309 & 310)
600
-
215.3
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. 225 MM THICK FOR BASEMENT (APSS NO. 501&504).
70
-
5521.2
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FOR GROUND FLOOR (APSS NO. 501&504).
158
-
6057.3
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FOR FIRST FLOOR (APSS NO. 501&504).
162
-
6294.4
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FOR SECOND FLOOR (APSS NO. 501&504).
157
-
6741.2
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FOR THIRD FLOOR (APSS NO. 501&504).
34.34
-
7188
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK FOR 100 MM THICK GROUND FLOOR (APSS NO. 501&504).
5
-
6722.1
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK FOR 100 MM THICK FIRST FLOOR (APSS NO. 501&504).
5
-
6959.2
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK FOR 100 MM THICK SECOND FLOOR (APSS NO. 501&504).
5
-
7668.1
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FOOTINGS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
50
-
8644.9
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PEDESTALS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
15
-
9176.2
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PLINTH BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
50
-
11019.8
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COLUMNS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
18
-
11524.7
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR COLUMNS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
12
-
11853.7
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR COLUMNS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
12
-
12494.8
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR THIRD FLOOR COLUMNS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
2
-
13136
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
40
-
10402.5
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
40
-
10584.1
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
40
-
11027.1
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR THIRD FLOOR BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
3
-
11471.3
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR THIRD FLOOR SLABS OF 125 MM THICK.
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
3.5
-
10952.1
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS OF 150 MM THICK.
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
107
-
9193.9
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR SLABS OF 150 MM THICK.
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
107
-
9375.5
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR SLABS OF 150 MM THICK.
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
107
-
9758.8
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS OF 175 MM THICK. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
3.2
-
8764.1
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR SLABS OF 175 MM THICK. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
3.2
-
8945.7
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR SLABS OF 175 MM THICK. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
3.2
-
9300.3
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR LINTELS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
6
-
11095.8
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR LINTELS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
6
-
11501.1
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR LINTELS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
6
-
12052.9
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP - GROUND FLOOR (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
36
-
1030
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP - FIRST FLOOR (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
19
-
1046.4
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP - SECOND FLOOR (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
21
-
1097.3
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,EXCLUDING SEIGNIORAGE CHARGES, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. LOFTS - GROUND FLOOR. (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
19
-
980
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,EXCLUDING SEIGNIORAGE CHARGES, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. RACKS 38 MM THICK - GROUND FLOOR. (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
50.00249999999999
-
334.2
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, CENTERING, MACHINE MIXING, Lifting ( Mannual),LAYING, ,CURING, FINISHING, INCLUDING ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR BED BLOCKS IN GROUND FLOOR FOR FINISHED ITEM OF WORK.(APSS NO: 402).(EXCLUDING SEIGNIORAGE CHARGES)
1
-
4727.2
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, CENTERING, MACHINE MIXING, Lifting ( Mannual),LAYING, ,CURING, FINISHING, INCLUDING ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR BED BLOCKS IN FIRST FLOOR FOR FINISHED ITEM OF WORK.(APSS NO: 402).(EXCLUDING SEIGNIORAGE CHARGES)
1
-
4810.2
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, CENTERING, MACHINE MIXING, Lifting ( Mannual),LAYING, ,CURING, FINISHING, INCLUDING ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR BED BLOCKS IN SECOND FLOOR FOR FINISHED ITEM OF WORK.(APSS NO: 402).(EXCLUDING SEIGNIORAGE CHARGES)
1
-
4893.2
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE IN CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN, INCLUDING COST OF ALL MATERIALS, (Excluding Seigniorage Charges) CHARGES, COST & CONVEYANCE OF ALL MATERIALS, INCIDENTAL, OERATIONAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS.NO: 901&903)
140
-
326.9
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE IN CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN, INCLUDING COST OF ALL MATERIALS, (Excluding Seigniorage Charges) CHARGES, COST & CONVEYANCE OF ALL MATERIALS, INCIDENTAL, OERATIONAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS.NO: 901&903)
141
-
351.6
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE IN CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN, INCLUDING COST OF ALL MATERIALS, (Excluding Seigniorage Charges) CHARGES, COST & CONVEYANCE OF ALL MATERIALS, INCIDENTAL, OERATIONAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK. SECOND FLOOR (APSS.NO: 901&903)
710
-
376.3
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. (Excluding Seigniorage Charges) GROUND FLOOR (APSS NO: 901&904)
1550
-
291.4
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. (Excluding Seigniorage Charges) FIRST FLOOR (APSS NO: 901&904)
1400
-
316.1
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. (Excluding Seigniorage Charges) SECOND FLOOR (APSS NO: 901&904)
1400
-
345.5
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. (Excluding Seigniorage Charges) THIRD FLOOR (APSS NO: 901&904)
300
-
374.9
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR (Excluding Seigniorage Charges) (APSS NO: 901 & 904)
700
-
308.1
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FIRST FLOOR (Excluding Seigniorage Charges) (APSS NO: 901 & 904)
550
-
332.8
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SECOND FLOOR (Excluding Seigniorage Charges) (APSS NO: 901 & 904)
550
-
366.6
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. THIRD FLOOR (Excluding Seigniorage Charges) (APSS NO: 901 & 904)
30
-
400.5
Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including (Excluding Seigniorage Charges), etc., complete for finished item of work, (APSS.NO:701&707). GROUND FLOOR
20
-
902
Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including (Excluding Seigniorage Charges), etc., complete for finished item of work, . (APSS.NO:701&707). .FIRST FLOOR
20
-
940
Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including (Excluding Seigniorage Charges), etc., complete for finished item of work, (APSS.NO:701&707). . SECOND FLOOR
20
-
978
Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including (Excluding Seigniorage Charges), etc., complete for finished item of work, . . GROUND FLOOR
680
-
937.6
Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including (Excluding Seigniorage Charges), etc., complete for finished item of work, . . FIRST FLOOR
520
-
975.6
Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including (Excluding Seigniorage Charges), etc., complete for finished item of work, . . SECOND FLOOR
520
-
1013.5
Providing skirting to internal walls / risers of steps with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including (Excluding Seigniorage Charges), etc., complete for finished item of work, --GROUND FLOOR.
38
-
944.8
Providing skirting to internal walls / risers of steps with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including (Excluding Seigniorage Charges), etc., complete for finished item of work, --FIRST FLOOR.
32
-
982.7
Providing skirting to internal walls / risers of steps with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including (Excluding Seigniorage Charges), etc., complete for finished item of work, --SECOND FLOOR.
32
-
1020.7
Dadooing to internal walls with colour glazed ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including (Excluding Seigniorage Charges), etc., complete for finished item of work,FOR GROUND FLOOR
22
-
538.1
Dadooing to internal walls with colour glazed ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including (Excluding Seigniorage Charges), etc., complete for finished item of work,FOR FIRST FLOOR
22
-
547.5
Dadooing to internal walls with colour glazed ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including (Excluding Seigniorage Charges), etc., complete for finished item of work, FOR SECOND FLOOR
22
-
557
Flooring with high polished granite 18 mm thick slabs Black set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including (Excluding Seigniorage Charges), labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials for GROUND FLOOR-PLATFORM
30
-
3001.5
Flooring with high polished granite 18 mm thick slabs Black set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including (Excluding Seigniorage Charges), labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials for FIRST FLOOR-PLATFORM
16
-
3071.1
Flooring with high polished granite 18 mm thick slabs Black set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including (Excluding Seigniorage Charges), labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials for SECOND FLOOR-PLATFORM
16
-
3140.8
DOOR WITH FRAME AND SHUTTER : Supply and fixing of ABS door with frame and shutter with SS hardware of butt hinges, door handles, tower bolts etc., and godrej make round mortise lock for finished item. a)Specification for Foamed PVC Door Frame:Providing of Factory made prelaminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 50mm long screw.The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 no's to be provided for each vertical member,GI stiffners of ("U" chanel of size 29x9x1mm, 150mm long) -3 no's at hinge point,Frame reinforcement of ("U" GI chanel of size 46x22x.06mm),Bottom tie rod of ("U" GI chanel size of 15x15x1mm) etc. complete as per manufacturers specification for finished item of work. Maximum door frame size : 980 x 2070 B)Specification for ABS Shutter: Providing of 35mm thick Facotry made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with aminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos. for each shutter and ISI make S.S round lock completes for finished item of work. shutter size : 910 x 2030 mm (The rate is for size upto 1.22 x 2.10 mt including double shutter with relavent fixures) SSR 2018-19 BMT-N.67.
65
-
7694
(Toilet door Shutter) 0.83 X 2.1M: SUPPLYING POSITIONING AND FIXING WPC SOLID DOOR SHUTTER OF 28MM THICK OF ECHON OR EQUIVALENT MAKE INCLUDING WPC DOOR FRAME MADE WITH WPS SCANTLINGS OF SIZE 100MM X 63 MM OF MAKE FUTURE PLY / WOOD PLUS / LIFE TIME , INCLUDING 6 NOS OF 'Z' HOLD FASTS OF SIZE 230 X 40 X 3MM , 4 NOS OF 100 MM BUTT HINGES, 2 NOS. 125MM LONG DOOR HANDLES, 1 NOS ALDROP OF SIZE 200 MM LONG, 2 NOS. of 200MM LONG TOWER BOLTS, WITH BOLTS, NUTS, NF SCREWS, INCLUDIMG CAST AND CONVEYANCE OF ALL MAERIALS TO SITE, LABOUR CHARES FOR MAKIN THE FRAMES, SHUTTER, MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHARG OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK (ALL FITTINGS AND FIXTURES SHOULD BE OF ALUMINIUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE). (APSS NO: 1001 &1002)
11
-
4710
SUPPLYING AND FIXING OF UNPLASTICISED POLY VINYL CHLORIDE (UPVC) 3 TRACK SLIDING WINDOWS WITH MESH SHUTTER – (2-GLASS SHUTTERS AND 1-MESH SHUTTER) DULY MANUFACTURED USING UPVC REINFORCED PROFILES (COMPOSITION OF PROFILE SHALL CONSISTS A MINIMUM OF 5.5 PHR OF TIO2 AND NOT MORE THAN 12 PHR OF CACO3 FOR EVERY 100 PARTS OF PVC RESIN) OF (94 MM X 45 MM) /(80 MM X 52 MM) X 2.20 MM FOR OUTER FRAMES, (58 MM X 39 MM) /(54 MM X 38 MM) X 2.20 MM FOR SLIDING SHUTTER FRAMES CAPABLE OF MOUNTING SINGLE GLAZING SYSTEMSTRUCTURALLY REINFORCED WITH HOT DIP GALVANIZED UP TO 50 MICRONS OF MINIMUM THICKNESS OF 1.0/1.2 MM PREFABRICATED & WELDED THROUGH FUSION WELDING. THE WINDOW SASH SHALL BE FITTED WITH 5 MM THICK CLEAR FLOAT GLASS OF REPUTED MAKE AND MESH SHUTTER FRAME SHALL BE (42 MM X 25 MM)/(52 MM X 21.5 MM) X 2.0 MM FITTED WITH VINYL COATED FIBER MESH- ON ROLLERS/ PULLEY DULY FIXED WITH GREY COLOUR TPV GASKET FOR SASH &GLAZING BEAD SHALL BE CO-EXTRUDED WITH GREY COLOUR SOFT PVC. SYSTEM SHALL HAVE SINGLE POINT LOCKING WITH TOUCH LOCK AND THE SYSTEM IS TO BE INSTALLED AT THE SITE USING ANCHOR FASTENERS, SILICON RUBBER SEALANT, EASY GLAZING/ DEGLAZING AT SITE ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, ACCESSORIES, LABOUR CHARGES FOR TRANSPORTATION, ERECTION AT SITE COMPLETE FOR FINISHED ITEM OF WORK.(BMT-P.72)
110
-
7341.400000000001
S & F OF FIXED LOUVERED VENTILATOR MADE OUT OF MULTI CHAMBERED UPVC SECTIONS WITH TPV GASKETS HAVING ISOLATED DRAINAGE AND REINFORCED WITH GALVANIZED IRON PROFILES THROUGHOUT THE WINDOW. THE OUTER FRAME HAVING AN OVERALL SIZE OF 60 X 55 MM WITH REINFORCEMENT OF 1 MM THICKNESS AND MULLION WITH OVERALL SIZE OF 74 X 60 MM WITH REINFORCEMENT OF 1 MM THICKNESS. VENTILATOR SHALL BE PROVIDED WITH 4.5 MM PIN HEAD GLASS, STANDARD HARDWARE. WALL THICKNESS OF FRAME & MULLION SHALL BE 2.0 MM, INCLUDING COST AND CONVEYANCEOF ALL MATERIALS, ACCESSORIES, LABOUR CHARGES FOR TRANSPORTATION, ERECTION AT SITE WITH TEMPLATES FOR CASEMENT SIZING COMPLETE FOR FINISHED ITEM OF WORK.
4
-
6004.9
SUPPLYING AND FIXING MS GRILLS FOR WINDOWS/ VENTILATORS OF ALL SIZES AS DIRECTED BY THE ENGINEER-IN- CHARGE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES FOR FABRICATION, FIXING ETC., COMPLETE FOR THE FINISHED ITEM OF WORK M.S.SQUARE BARS OF ALL SIZES
20
-
92.5
SUPPLYING AND FIXING MS GRILLS FOR WINDOWS/ VENTILATORS OF ALL SIZES AS DIRECTED BY THE ENGINEER-IN- CHARGE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES FOR FABRICATION, FIXING ETC., COMPLETE FOR THE FINISHED ITEM OF WORK M.S.FLATS OF ALL SIZES
30
-
90.2
Painting to new walls with 2 coats of Plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls
5200
-
139.9
PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK. ALL FLOORS (APSS NO:908)
1250
-
201.4
PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
100
-
174
PAINTING TO NEW WOOD WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
70
-
184.8
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS.
5200
-
183.2
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR EXTERNAL WALLS - GROUND FLOOR.
300
-
357.7
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR EXTERNAL WALLS - FIRST FLOOR.
340
-
357.7
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR EXTERNAL WALLS - SECOND FLOOR.
340
-
362.4
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR EXTERNAL WALLS -THIRD FLOOR.
270
-
367.1
PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
56
-
56834.8
SUPPLY AND FIXING OF STAINLESS STEEL RAILING USING STAINLESS STEEL TUBES, SECTIONS, PLATES, SHEETS, PIPES OF ALL SIZES & DIAMETERS OF 304 GRADE, INCLUDING FABRICATION AS PER APPROVED DESIGN USING STAINLESS STEEL WELDING RODS, BUFFING, POLISHING, LACQUER FINISHING, TO PRESENT SEAMLESS FINISH, ALL OTHER INCIDENTAL, OPERATIONAL CHRGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
1000
-
568.3
SUPPLYING AND LAYING RAIN WATER DOWN TAKE PIPES WITH 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
80
-
268.7
Supply and Fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.50 mm thick Gyp Board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20 x 27 x 30 mm (web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 x 15 x 15 x 0.90 mm) from soffit at 1220 mm c/c with ceiling angle (25 x 10 x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.50 x 26 x 10.50 x 0.55 mm) fixed in diection perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.50 mm drywall scews at 230 mm c/c & jointing, fixing using joint compound and paper tape to have a flush look including filling the tappered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd., Specification.
200
-
897.8
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 15.90 MM OD PIPES SDR 13.5
20
-
58.3
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES SDR 13.5
40
-
93.5
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5
50
-
135.3
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 34.90 MM OD PIPES SDR 13.5
40
-
212.3
SUPPLYING AND FIXING 12.70 MM DIA NP BIB TAP (400 GRAMS) INDIAN MAKE HEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
391.9
SUPPLYING AND FIXING 25 MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
3
-
1168.2
SUPPLYING AND FIXING 76.2 MM (3") DIA UV RESISTANT UPVC SWR NAHANI TRAP WITH JALI OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
94.6
SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
30
-
407
SUPPLYING AND LAYING 75 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
50
-
195.4
SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
45
-
268.7
CONSTRUCTING 457.2 X 457.2 MM (1'-6" X 1'-6") BRICK MASONARY INSPECTION CHAMBER WITH CM (1:6) PROP. USING 2ND CLASS CLAY BRICKS OF 225MM THICK , AND FITTED WITH 457.2 X 457.2 MM (1'-6" X 1'-6") RCC COVER UP TO A DEPTH OF 914.4 MM (3'-0") AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION FOR FINISHED ITEM OF WORK.
6
-
3407.8
SUPPLYING AND FIXING INDIAN MAKE FLAT BACK WHITE GLAZED WASH HAND BASIN (HSW/PARRYWARE/NEYCER) IST QUALITY CONFIRMING TO IS: 2556-PART-4 :1972 OF SIZE 550 X 400MM SINGLE C.P. PILLAR COCK AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFIRMING TO IS : 2963-1979 AND FITTED WITH 15MM NOMINAL BORE CHROMIUM PLATED PILLAR TAP OF 1ST QUALITY INDIAN MAKE 400GRAMS SEICO/SENIOR/NICE/ESSO OR EQUIVALENT COMPLETE WITH STANDARD CI BRACKETS, AND PAINTING TO ALL IRON FITTINGS WITH 2 COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK. INCLUDING WOODEN BLOCK INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK.
6
-
1810.3
SUPPLY AND FIXING IN POSITION EUROPEAN TYPE WATER CLOSET OF BEST INDIAN MAKE WHITE GLAZED WITH 100 MM 'P' TRAP, PLASTIC SEAT AND LID FOR EUROPEAN WATER CLOSET AND BUFFERS AS PER IS 2548-1963 AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITYOF PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
6
-
3777.7
SUPPLY AND FIXING WHITE GLAZED FLAT BACK HALF STALL URINALS OF 1 ST QUALITY CONFORMING TO IS2556-1995 WITH STANDARD CP SPREADER OF OVERALL SIZE 95X95X57 MM CONFORMING TO IS 2556-PART 6 ,SEC-6-1974 FIXED WITH SCREWS COMPLETRE INDIAN MAKE OF SIZE 590 X375 X390 MM INCLUDING 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, 38.10 MM C.P WASTE COUPLING, 38.10 MM PVC SOLID WASTE PIPE OUTLET, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
3
-
3364.1
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
5
-
100.1
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
62.7
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'T' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
121
SUPPLYING AND FIXING BEST INDIAN MAKE 609.6X457.2mm T.V SHAPE MIRROR WITH PLASTIC FRAME MIRROR INCLUDING WOODEN BLOCKS, SCREWS ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
6
-
529.1
SUPPLYING AND FIXING 24" LONG 3/4 " MM DIA, C.P TOWEL ROD WITH BRACKETS AND SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE. (BMW-I.132)
6
-
393.5
SUPPLYING AND FIXING NP SOAP DISH HEAVY TYPE WITH NP SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.
6
-
232.1
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5
50
-
135.3
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 34.90 MM OD PIPES SDR 13.5
25
-
212.3
SUPPLYING AND FIXING 25 MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
1168.2
PROVIDING AND PLACING ON TERRACE POLYTHELENE WATER STORAGE TANKS (AT ALL FLOOR LEVELS) DOUBLE LAYER APPROVED BRAND CONFORMING TO IS12701-1996 AND MNUFACTURE WITH COVER AND SUITABLE LOCKING ARRANGEMENTS MAKING NECESSARY HOLES FOR INLET & OUTLETS AND OVERFLOW PIPES BUT WITHOUT FITTINGS & BASE SUPPORT FOR TANKS, MAKING GOOD THE SAME TO ENSURE LEAK PROOF WITH AN APPROPRIATE MASONARY PLATFORM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC.,COMPLETE FOR FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER -IN- CHARGE
4000
-
5.8
SUPPLYING AND FIXING GUN METAL GATE (GM PEET) VALVE AS PER IS -778 CLASS-1 INDIAN MAKE HEAVY TYPE OF 40 MM NB SIZE 1st QUALITY, WITH ALL NECESSARY FITTINGS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
4
-
2388.9
EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - FOR SEPTIC TANK (APSS 308). (EXCLUDING SEIGNIORAGE CHARGES)
76
-
200.2
CEMENT CONCRETE (1:5:10) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. SEPTIC TANK BED. (APSS NO: 402). (EXCLUDING SEIGNIORAGE CHARGES)
1
-
3489.1
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, CENTERING, MACHINE MIXING, Lifting ( Mannual),LAYING, ,CURING, FINISHING, INCLUDING ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR BED BLOCKS IN GROUND FLOOR FOR FINISHED ITEM OF WORK.(APSS NO: 402).(EXCLUDING SEIGNIORAGE CHARGES)
0.4
-
4727.2
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM & 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. BAFFLE WALLS 100MM THICK FOR SPECTIC TANK.(APSS NO. 501&504). (EXCLUDING SEIGNIORAGE CHARGES)
1.3
-
493.26
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM & 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SEPTIC TANK SIDE WALLS 335 MM THICK.(APSS NO. 501&504). (EXCLUDING SEIGNIORAGE CHARGES)
9.3
-
5425.9
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR BAFFEL WALL BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
0.2
-
10402.5
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COVER SLAB OF SEPTIC TANK 125 MM THICK.
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE) (EXCLUDING SEIGNIORAGE CHARGES)
2.2
-
9934.2
PLASTERING TO OUTSIDE SEPTIC TANK 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. (Excluding Seigniorage Charges) GROUND FLOOR (APSS NO: 901&904)
15
-
291.4
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE IN CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN, INCLUDING COST OF ALL MATERIALS, COST & CONVEYANCE OF ALL MATERIALS, INCIDENTAL, OERATIONAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK. (APSS.NO: 901&903)(EXCLUDING SEIGNIORAGE CHARGES)
60
-
326.9
PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
0.5
-
56834.8
SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
15
-
407
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
2
-
17.6
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point including cost of suitable size of modular metal box of the same make of switch including all labour charges etc., complete (Makes: Sudhakar/VIP/GM
300
-
98
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of makes concealed in wall with all required accessories including masonary work and labour charges etc., complete. (For circuit mains, power sockets and computer boards only)
(Makes: Sudhakar/VIP/GM
300
-
93.9
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.
(Makes: Sudhakar/VIP/GM
600
-
75.8
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of concealed on underneath the flooring with all required accessories including masonary work and labour charges etc., complete.(Makes: ISI Mark Sudhakar /VIP/GM)
200
-
73.4
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A one way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non Residential Buildings.
Wire Make: (Finolex/RR kabel/Havells) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom.
Switches & Cover frame Make:Legrand Arteor/Carbtree Murano/GM-Zenova
351
-
578
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A two way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for staircase light points in Non Residential Buildings.
Wires Wire Make: (Finolex/RR kabel/Havells) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom.
Switches & Cover frame Make:Legrand Arteor/Carbtree Murano/GM-Zenova
6
-
867
Wiring with 2 of 14/0.3mm (1.0 Sq.mm)Fire Retardant low smoke FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6/10A one way modular switch control and 3/2 pin modular socket fixing on separate board with 3 module cover frame including all labour charges etc., complete.
Wires Make:(Finolex/RR kabel/Havells) Switches & Cover frame Make: Legrand Arteor/Carbtree Murano/GM-Zenov.
13
-
512.3000000000001
Supply and fixing of 6/10A 3/2 pin modular plug socket with 6/10A one way modular switch control on a common switch board covered with 3 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenov.
33
-
405
Supply and Fixing of 16/20A Modular 1 way combi Socket with shutter and 16A / 20A 1 Way Modular Switch duly recessed in wall with 4 Modular Box and 3 modular cover frame including earth connections and all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova/
48
-
676
Supply and fixing of 16/20A 1 way modular switch-1 no with 20A modular socket -1no and 6/10AA 3/2 pin modular plug socket - 3 nos with 6A 1 way modular switch - 3 nos with 12 Module box size covered with 12 module cover frame including earth connections and all labour charges etc., complete.(For computer switch board) Make: Legrand Arteor/Carbtree Murano/GM-Zenova
4
-
1650
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED, 490Lumens bulb (for new installation).
Holder Make: Anchor / Gold Medal Olive / Million Zoom
LAMP Make:Phillips / OSRAM / GE / Crompton.
6
-
260
Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. [for Earth lead to circuit mains, power sockets].
Make: Finolex/RR kabel/Havells
1400
-
22
Supply and run of 2 of 36 /0.3mm (2.5 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for run of circuits, power plugs & computer boards including all labour charges etc., complete. Make:Finolex/RR kabel/Havells
600
-
73.8
Supply and run of 2 of 56/0.3mm (4 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.[from Distribution boards to A/C points and mains to LDB].
Make:Finolex/RR kabel/Havells
200
-
112.1
Supply and run of 2 of 84/0.3mm (6 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.[from Distribution boards to A/C points and mains to LDB].
Make:Finolex/RR kabel/Havells
300
-
153.8
Supply and run of 1 of 36 /0.3mm (2.5 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. [for Earth lead to A/C points and Distribution boards].
Make:Finolex/RR kabel/Havells
500
-
37
Supply and fixing of modular socket type Telephone jack with Connector on 2 modular box and cover frame including giving connections, cost of all accessories and labour charges etc., complete. Make:Legrand Myrius/Carbtree Thames Platinum.
4
-
310
Supply and run of 5 Pair, 0.5mm telephone copper wire of makes Finolex / Delton / Polycab including all labour charges etc., complete.
80
-
38.2
Supply installation testing and commisioning of1no of Cat6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant
Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
4
-
480
Supply and run of LAN Cable cat - 6 UTP cable in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete.
Makes:D Link / AMP / Molex / Legrand / Krone.
80
-
45.9
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with double ball bearings without Regulatorincluding cost and conveyance of all materials and labour charges etc., complete.
Makes: Crompton HS Decora / Havells ES Plus / Orient summer crown
107
-
2555
Supply of 400w stepped type electronic regulator including cost and conveyance of materials and labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenov.
107
-
396
Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
107
-
186
Supply and transportation of 18W, 1800 lumens,T8,1200mm length LED patty type tube light, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete
Makes: Phillips / GE / Crompton.
225
-
935
Fixing of 18W LED tube light luminaire on wall / Ceiling with all accessories including giving connections and all labour charges etc., complete.
225
-
150
Supply of fresh air exhaust fan of light duty 250V A.C.50Hz../ 300mm size (12") 1350 R.P.M Metallic body plastic blades, wire mesh, etc., complete. complete.Make Crompton/Orient.
6
-
1361
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete.
6
-
548
Supply and fixing 4way TPN D.B with board with IP-30 protection suitable for three phase 40A FP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 12 Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.(for DB)
Make: Legrand(Ekinox 3) / Schneider-Acti9 / Seimens /L&T Newrang
1
-
7763
Supply and fixing 6way TPN D.B with board with IP-43 protection suitable for three phase 40A FP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 18Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.(for DB)
Make: Legrand(Ekinox 3) / Schneider-Acti9 / Havells/Indo Asain
4
-
9721
Supply and fixing 8way TPN D.B with board with IP-43 protection suitable for three phase 63A FP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 24Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.(for DB)
Make: Legrand(Ekinox 3) / Schneider-Acti9 / Havells/Indo Asain
1
-
12559
Supply and transportation of 60W LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass,Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 100lm/W and junction
temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥ 10KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete.
MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj
1
-
7150
Fixing of MV / SV/MH luminaire on wall with 3Cx 2.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete.
1
-
527
Supply and transportation of 20W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's having System efficacy 110 lm/W and junction
temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution , THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete
MAKE : Philips (Green line) / GEVenture/ Crompton(Hawk) / Bajaj (Edge+)
6
-
2420
Fixing of LED street light luminary with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete.
6
-
581
Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
2
-
17320
Supply and Run of 25mm x 3mm copper strip including cost of all accessories and labour charges etc., complete.
10
-
458
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
2
-
10830
Supply and Run of 25mm x 6mm G.I strip including cost of all accessories and labour charges etc., complete.
100
-
111.7325
Supply of 50 Sqmm 3.5Core XLPE insulated, 1100V gradearmoured alluminium cable as per specification confirming to IS:7098 (Part - I)
Makes: Torent / Universal / Unicab
30
-
341
Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/50Sqmm 3.5 Core XLPE aluminium conductor cable of 1100 volt grade as required of size.Makes:Dowels/Comet/SMI
4
-
176
Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
20
-
213
Supply and errecting of Tripple Pole Neutral 415V 200A Busbar chamber as per IS:8623 Sheet Steel enclosure with copper Bars and Size of busbar chamber is 445X405X120mm etc., complete.including cost and conveyance of all materials and labour charges etc., complete.Make: Sputnik.
1
-
3186
Supply and erection of 125A, 4 Pole, 25kA, MCCB in SS enclosure with thermal magnetic setting arrangement with all connections and labour charges etc., complete.L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL.
1
-
11799
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements