Panchayat Raj Engineering Department Tender

Supply of 3 Core 2.50 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel/ Polycab / Havells / EI/ Gloster/ Goldmedal/ GM

Supply of 6 sqmm WPSC (Weather Proof Single Core) ISI Alluminium service Wire. Makes: Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Plaza/ Payal / Sudhakar/ Rajnigandha/ Airson/Orbit/ollvin/Beljin

Manufacture, supply and delivery of 50mm dia CI D/F Non Return valve Heavy Duty round body conforming to IS 5312 Part 1/1984 excluding transportation, Central Excise duty and sales tax etc., complete.,

Supplying and fixing of 50mm dia MS Clamp Set with rubber washers, bolts and nuts cost and conveyance of all materials and all labour charges etc., complete.,

Supplying and fixing of 175mm dia MS Bore Cap as per ISI Specifications

Supplying and fixing of 50mm dia GI Heavy duty long couplings as per ISI Specifications

Supplying and fixing of 50mm dia CI Flange Sets including bolts and nuts as per ISI Specifications

Towards Erection charges for 7.50 HP Submersible pump set including hiring of tripod and all labour charges etc., complete.,

Cost of 50mm dia GI Pipe as per IS 1239 Specifications including cost and conveyance of all materials etc., complete., excluding taxes on Pipe

Supplying and fixing of 50mm dia GI Heavy duty long couplings as per ISI Specifications

Supplying and fixing of 50mm dia CI Flange Sets including bolts and nuts as per ISI Specifications

Supply and delivery of 1/2" to 1" Bolts and nuts with double washers including cost and conveyance of materials and all taxes etc., complete.,

Supply and delivery of 3 to 6mm thick rubber packng including cost and conveyance of all materials and all taxes etc., complete.,

Construction of 20,000 liters capacity Circular Over Head Service Reservoir (OHSR) with 12.45 Mts staging and SBC of 15 T/Sqm with raft foundation for a wind pressure of 105.88 Kg/sqm using Vibrated Reinforced Cement Concrete M 30 Grade design mix and using 20 mm HBG machine crushed metal in the site selected by the department as shown in the drawings and specification as per the departmental procedure, including earth work excavation in all kinds of soils in wet or dry conditions except in rock for foundations fitted with (A) RCC or Aluminium ladder inside 0.60 Mts wide (B) Spiral staircase on the out side shall be provided up to 200 KL. Above 200 KL capacity dog legged staircase shall be provided with staircase flight width of 1.0 mts and landing width of 1.20 mts with SS railing up to 1.0 Mts height (C) Lightening arrestor including conductor and earthing as per IS 3070 earthing extended below the foundation (D) RCC finial ventilators with copper or stainless steel fly proof mesh (E) DI Man holes of 2 Nos frame and cover of 0.60x0.60 Mts size (light duty) as per IS specifications (F) Water level indicator of good quality with ebonite/ copper float of approved pattern - 1 No (G) The ladder shall be with MS ladder and verticals with HDPE of 10 Kgs/Sqcms shall be provided for single column OHSR only. (h) Minimum staging for all ELSR/OHSR shall be 10.0 Mts (i) The increase in staging shall be at 1.0 Mt interval. (j) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1.20 Mts (k) The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with MS collapsible gate up to 1st brace level from ground level to prevent unauthorized entry (l) DI swan neck ventilators shall be provided in top dome and slab. (m) The above rates are exclusive of all inlet, outlet connections and valves. All valves near inlet, out let and for scour of ELSRs shall be DI Valves of heavy duty confirming to the specification of SOR item No: 28. (n) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the reservoir including roof dome (o) Two coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings, cost and conveyance of all materials, centering, curing, seigniorage, all labour charges and testing the reservoir for water tightness etc.,complete., for finished item of the work.

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 80mm dia 2.00 Mts length

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 80mm dia 0.60 Mts length

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 80mm dia 0.60 Mts long tail piece

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) Excluding Transportation and all Taxes for 80mm dia DI Double Flange Duck/Foot bend.

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) Excluding Transportation and all Taxes for 80mm dia DI Double Flanged Bell Mouths

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) Excluding Transportation and all Taxes for 80mm dia DI Double Flanged 90 Degree Bends

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) Excluding Transportation and all Taxes for 80mm dia DI Double Flanged Semi Circular Bend

Supply and delivery of 80mm dia PN 1.60 (MPa) "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation

Supply and delivery of 1/2" to 1" Bolts and nuts with double washers including cost and conveyance of materials and all taxes etc., complete.,

Supply and delivery of 3 to 6mm thick rubber packng including cost and conveyance of all materials and all taxes etc., complete.,