Panchayat Raj Engineering Department Tender

Manufacture, Supply, delivery, erection, testing, training, commissioning and maintenance of Micro filters of 1.00 MLD production capacity (with output of 60000 lts/ hr capacity) comprising of first stage as pulversing Quartz filtration, intermediate stage as Granular activated Carbon flitration of Pressure Vessels are designed (Cylinderial shape with Dishends and have a Vertical orientation), multiple Micro filtration units (Lego filter of 5 Micron or 3000 mesh). Vessels with Internal FRP (Fibre Reinforced Plastic) lining, Exterior two coats painting over two coats of red Oxide or Zinc primer provide enhanced corrosion protection and abrasive resistance and online auto monitoring chlorine doser for disinfected water duly connecting the system to water treatment plant including Coagulation liquid container with dosing pump back washing and reverse washing drain arrangements required high speed pump motor with panel board Pipes Fittings valves outside ladder etc complete and the treated water should fulfil the BIS standards for drinking water quality in all aspects. The finished rate including packing, transportation, insurance and all operational and incidental charges, maintenance upto defect liability period -As per the technical specifications approved by the Department. The rates are inclusive of cost and conveyance of all material and labour charges for finished item of work including all taxes but including overheads and contractor's profit @ 13.615%

Cost,Supply and fixing of Name Board of size 1.80Mtx1.20Mt with M.S.Squarepipe of 40mmx40mmx3.2mm for verticals 2No-3.9mt each, Horizontals 2 Nos-1.8mt each and back support with M.S square pipe of 25mmx25mmx2.6mm verticals-2Nos-1.20mm each for 18mm guage GI sheet board of size 1.8mtx1.20mt and painting with enamel paint as per instructions of Engineer incharge and fixing in the ground in concrete including cost, conveyance of all materials,fabrication charges,painting and labour charges etc complete.

Construction of 75mm dia HDPE 6 kg/cm2 pipe line as per IS 4984 - 1995 With its amen tends and revisions and as shown in the drawing (Part C of Volume -I) and as per technical specifications (Part -B of Volume -I) including supply of pipes necessary specials such as bends, Tees etc. Lowering and laying and jointing of pipe lines true to alignment and gradient trench excavation (earth work excavation in all soils up to SDR using manually) for pipelines in soils except rock requiring blasting and refilling trenches with excavated earth (other then rocky soils and boulders) with watering and ramming and removing surplus earth and filling the pipe line with water and testing etc.complete as specified in technical specifications. The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of pipe line work including contractor's profit and over heads charges etc Complete.(100% manually)