Panchayat Raj Engineering Department Tender

Supply and filling of sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost all operational, incidental, labour charges, complete for finished item of work. including cost and conveyance of all material and labour charges, but excluding seignorage charges and GST etc., complete. as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete.but excluding Seigniorage Charges and GST Charges for finished item of work etc.,complete (APSS No. 402)

Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard other than granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete but excluding Seigniorage Charges and GST Charges for finished item of work etc.,complete in foundation and basement. (APSS No. 601 & 615)

Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete but excluding Seigniorage Charges and GST Charges for finished item of work for Super Structure (APSS No. 501 & 504)for basement and Superstructure upto 3.66 mts Height

Plastering with CM (1:5) 12 mm thick with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete but excluding Seigniorage Charges and GST Charges for finished item of work for Internal walls. (APSS 901,903 & 904)

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete but excluding Seigniorage Charges and GST Charges for finished item of work for External walls .(APSS 901,903 & 904)

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., complete, including overheads & contractors profit complete but excluding Seigniorage Charges and GST Chargesfor finished item of work (APSS NO 701 & 707)

Providing dadooing to walls with glazed red or white full body ceramic wall tiles of Size 300 x 600 mm and thickness between 6-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of CM(1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete, including overheads & contractors profit complete but excluding Seigniorage Charges and GST Chargesfor finished item of work

Vibrated Reinforced Cement Concrete M-25 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm -6mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering,overheads & contractors profit complete.but excluding Seigniorage Charges and GST Charges for finished item of work for Roof Slab 125 mm Thick

Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete but excluding GST Charges complete for finished item of work.( APSS No.126)

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete but excluding GST Charges for finished item of work in all floors for Walls.(APSS No. 911) for interior walls

Painting to New walls two coats of Acrylic Plastic Emulsion paint of superior quality of approved brand and shade to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete but excluding GST Charges for finished item of work .(APSS No. 911) for exterior walls

Painting to new walls in two coats with Plastic/Acrylic Emulsion Paints Asian/ Berger/ Nerolac or equivelent and shaded over Priming Coat with Cement Primer water base exterior Gr -1 or equavalent quality to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including cost and conveyance of all materials and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting, curing etc., complete, including overheads & contractors profit complete but excluding Seigniorage Charges and GST Chargesfor finished item of work in all floors for External Walls (APSS No 911)

Plain Cement Concrete (1:2:4) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 12 mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete but excluding Seigniorage Charges and GST Charges for finished item of work Over Roof Slab (APSS No. 402)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing admixture confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, with Rabit wire mesh (Chicken mesh) laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete but excluding Seigniorage Charges and GST Charges for finished item of work over Roof Slab (APSS No. 901 & 903).

Ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete but excluding Seigniorage Charges and GST Charges for finished item of work for Ceiling.(APSS 901,903 & 904)

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, but excluding Seigniorage Charges and GST Charges for finished item of work (APSS NO 701 & 707)

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi- chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) including cost of all materials and Conveyance etc., complete, but excluding GST Charges for finished item of work for Two Track Windows

Supplying & fixing SINGLE PANEL 30 mm thick PVC DOOR, door shutters with shutter frame and Infill panel made from PVC material, the shutter frame made out of PVC extruded sections having overall dimensions of 6 0mm x 30 mm with wall thickness of 1.3 mm ± 0.3 mm, with the Infill panel made out of multi chambered seamless hollow PVC extruded panel having overall dimensions of 610 mm x 20 mm having wall thickness 1 mm ± 0.2 mm with the shutter frame meter cut and joined at corners and all the hardware locations reinforced with special polymeric bars as per drawing including providing special PVC braket on hinge side, etc complete including cost of all materials and Conveyance etc., complete, but excluding GST Charges for finished item of work for Doors

Supply and fixing doors as per drawings with medium teak wood frame of section 125 mm x 100 mm and ISI marked teak wood door shutters of 30 mm thick including cost and conveyance to site of teak wood frame, Shutters including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Brass fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1No Heavy duty mortise lock 6/7 leavers, 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete but excluding GST Charges for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1800mm x 2100mm) .

ELECTRIFICATION

Supply and Fixing of 25mm dia 2.20mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains including all labour charges etc., complete. but excluding GST Charges for finished items of work.

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings,.including overheads & contractors profit complete, but excluding GST Charges for finished items of work.

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work. Makes: As per list of recommended brands

Supply and fixing of 20A/16A 3pin plug socket with indicator lamp and 16 Amps fuse unit and 16 Amps switch control (5 in one) on modular cover frame including earth connection and all labour charges etc., complete on wall.including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge, but excluding GST Charges for finished items of work. Makes: As per list of recommended brands

Supply and run of 1 of 22/0.3mm (1.5 Sqmm) FR / FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable in existing pipe for earth continuity including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work.

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FR / FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable in existing pipe for earth continuity including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work.

Supply and run of 2 of 56/0.3mm (4 Sqmm) FR / FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable in existing pipe for earth continuity including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work.

Supply of 48" (1200mm) Sweep decorative Ceiling Fan, with double ball bearings with all accessories without Regulator with all standard accessories,including Transportation Charges on Unit Cost. including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work. Makes: As per list of recommended brands

Supply and transportation of 30W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy =120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty,.including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work. Makes: As per list of recommended brands as category I

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of =100 lumens/watt , PF0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty, including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work. Makes: As per list of recommended brands as category I.

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7 w LED bulb (for new installation). including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work

Supply and fixing SPN Distribution board with IP-43 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete, including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete including cost of all materials, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work

WATER SUPPLY & SANITATION

Supply & fixing 580mm x 440mm size white virerous orissa pan with attached footrests of approved make confirming to IS 2556 (part - III) with 'P' or 'S' trap, including 10 lit. low level PVC flusihing system confirming to IS 7231 with all internal fittings, CI brackets, 32mm dia CP flush pipe, 15mm dia 450mm long PVC connerctor, 15mm dia Cp brass strop cock 300 grams of ISI make, cutting and making good the walls and floors wherever required including cost & conveyance of all material to work site, all labour charges for all operations for fixing etc., complete but excluding GST Charges for finished items of work.

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:29631979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock,including cost & conveyance of all material to work site, all labour charges for all operations for fixing etc., complete but excluding GST Charges for finished items of work.

Supply & fixing of tested NP bib taps at all levels of 12.7mm N.P bib tap Indian make 3 heavy duty sort body ( N.P bib tap indian make 300 g ) including cost & conveyance of all materials, labour charges including cost & conveyance of all material to work site, all labour charges for all operations for fixing etc., complete but excluding GST Charges for finished items of work for all floors

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification ,Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice inclusive including all labour charges etc., complete. as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work for 110 mm dia 4kgs/cm2

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification ,Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice inclusive including all labour charges etc., complete. as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work for 75 mm dia 4kgs/cm2

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg. including Cost and Conveyance of all materials and overheads & contractors profit etc.., complete, but excluding GST Charges for finished items of work.

Supply and fixing of 4" (101.6 mm ) Nahany Trap with Jali - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including cost and conveyance of all materials and all incidental and operational, labour charges, lift charges, but excluding GST etc., complete for finished item of work.for All Floors..

Supply and delivery of 32mm dia UPVC raising column pipe, with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights.including cost and conveyance of all materilas and labour charges etc., complete. as directed by Engineer in Charge.including overheads & contractors profit complete, but excluding GST Charges for finished items of work Makes: As per list of recommended brands.

Supply, Transportation, erection and Commissioning of MNRE approved and confirming to IS 12933 P-1,2,3&5, 1000 LPD Flate plate Collector type Solar Water heating System with temperature application of 60 degrees with Stain less steel - 304L grade inner tank with PUF Insulation and Aluminum Cladding for Outer Cover, suitable EPDM rubber pipe connection from Collector to Solar Tank with electrical Heating back up etc., with 3 years Guarantee for Solar system and additional 2 years warranty, including Cost and Conveyance of all materials and overheads & contractors profit etc.., complete, but excluding GST Charges for finished items of work. Makes: As per list of recommended brands.

Grand Total