Panchayat Raj Engineering Department Tender

Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P, excluding all taxes 100mm dia DWC SN8 Pipe ( House service connections)

Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P, excluding all taxes 150mm dia DWC Pipe

Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P, excluding all taxes 300mm dia DWC Pipe

Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P, excluding all taxes 400mm dia DWC Pipe

Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line) 100mm dia DWC SN8 Pipe ( House service connections)

Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line) 150mm dia DWC Pipe

Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line) 300mm dia DWC Pipe

Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line) 400mm dia DWC Pipe

Manufacture, supply, & delivery of fittings & accessories compatible with DWC pipe - non smooth External Annular Corrugated and smooth Internal Surfaces (Double Wall) for non-pressure or similar type of class SN8 Structured Wall polythelene piping systems including transportation to anywhere in A.P, excluding GST and other Government duties SEALING RING 100mm dia DWC Pipe

Manufacture, supply, & delivery of fittings & accessories compatible with DWC pipe - non smooth External Annular Corrugated and smooth Internal Surfaces (Double Wall) for non-pressure or similar type of class SN8 Structured Wall polythelene piping systems including transportation to anywhere in A.P, excluding GST and other Government duties SEALING RING 150mm dia DWC Pipe

Manufacture, supply, & delivery of fittings & accessories compatible with DWC pipe - non smooth External Annular Corrugated and smooth Internal Surfaces (Double Wall) for non-pressure or similar type of class SN8 Structured Wall polythelene piping systems including transportation to anywhere in A.P, excluding GST and other Government duties SEALING RING 250mm dia DWC Pipe

Manufacture, supply, & delivery of fittings & accessories compatible with DWC pipe - non smooth External Annular Corrugated and smooth Internal Surfaces (Double Wall) for non-pressure or similar type of class SN8 Structured Wall polythelene piping systems including transportation to anywhere in A.P, excluding GST and other Government duties SEALING RING 400mm dia DWC Pipe

MANHOLE PCC(1:4:8) 40 mm HBG metal including cost, conveyance of all materials, machinery and labour charges etc.,

MANHOLE Construction of manhole chambers by usnig brick masonry in CM (1:4) including cost, conveyance of all materials, machinery and labour charges etc., complete

MANHOLE Plastering with CM (1:4) 12 mm thick including cost, conveyance of all material, machinery and labour charges etc.,

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers E.H.D.-35 with 560mm dia. Clear opening and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes.

VRCC M 20 using 20 mm HBG metal including cost, conveyance of all materials, machinery and labour charges for Cover slab over Manhole slab ( 466 x 1.4 x 1.40 x 0.15)

Conveyance of excavated earth, CC wastages away from the work site for an conveynce of 4.00 Kms including cost, conveyance of all materials, machinery and labour charges

Refilling the pipeline trenches with ordinary soils, sides of chambers etc., with selected excavated soils complying with standard specifications after the pipeline is laid, jointed and tested as directed by the departmental officers including breaking clods, watering, tamping, ramming and all leads and lifts, labour charges and inclusive of all incidental and operational charges etc., complete. (as per SSR 14-15- Amendment)

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work. (as per amendment in 2011-12 SSR) @ 65 kg/ Manhole

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH

Providing Plain cement concrete M 20 Nominal Mix using 20 mm graded metal and using concte mixer as approved by the department including cost and conveyance of all materials to site, machine mixing of concrete, all lifts, leads, delifts, centering, laying in position, vibrating, compacting, curing, removal of centering, all labour charges, tools and plants, and all other incidental and operational charges etc., complete as per specifications, drawings and as directed by the Engineer - in - Charge (may be used as CC 1:2:4)