Panchayat Raj Engineering Department Tender

Plastering 20mm thick in 2 coats using screened sand with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponze finishing including cost and conveyances of all materials and labour charges etc. over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, including contractor profit and over head charges ,but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) External walls

Plain Cement Concrete (1:3:6) prop nominal mix (cement: fine aggregate: coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry (obtained by blasting) including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Supply and fixing of CPVC pipes (22.20 mm OD pipe - SDR 13.5) and fittings to meet the requirement of ASTM-D 2846 and produced in CTS (Copper Tube sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water (IS 15778:2007) of Ashirvad/Ajay/ Flowguard etc.,

Supply & fixing of tested NP bib taps at all levels of 12.70mm dia of Indian make 300g first quality including cost & conveyance of all materials, labour charges for finished item of work, and all taxes complete for all floors Hand wash

Supply and fixing of CPVC pipes (28.60 mm OD pipe - SDR 13.5) and fittings to meet the requirement of ASTM-D 2846 and produced in CTS (Copper Tube sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water (IS 15778:2007) of Ashirvad/Ajay/ Flowguard etc.,

Supply and fixing of MS Grills including cost and conveyance of all materials, cutting, welding, grinding and labour charges etc., complete

Flooring with vitrified tiles Double charged / multi charged stain free full body porcelain with double layer pigment of size 600x600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13630 of any colour and finish all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Painting to New iron work with two coats of ready mixed first quality synthetic enamel paint of approved brand and shade over primary coat of red oxide primer grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors (APSS No. 1201 &1208)

Supplying and fixing of 1200 mm (48") sweep 230 V AC 50 Hz Ceiling Fan with 3 blades and double bearing and regulator including transportation and giving connection with twin core wire etc., complete.

Supply and Fixing of 20W, 2400 mm lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminium anodized body input voltage AC 220-260 Volts, having luminous efficacy =90 lumens/watt, with PF0.9 surge protection : 2KV, THD10%

Supply and Transportation of LED Street light luminar made of pressure diecast Aluminium body with power coated having protective toughned glass complete with earth connections and not less than two years of warranty 30 W

Supply and Transportation of LED Street light luminar made of pressure diecast Aluminium body with power coated having protective toughned glass complete with earth connections and not less than two years of warranty 60 W

Supply & fixing of tested NP bib taps at all levels of 12.70mm dia of Indian make 300g first quality including cost & conveyance of all materials, labour charges for finished item of work, and all taxes complete for all floors Toilets & Bath rooms

110 mm dia 3m single socket PVC/SWR pipe 4 kg/sqcm - prince/ sudhakar or any ISI brand BMW-G II

Supply and Transportation of Single phase open well submersible motor pumpset conforms to IS 14220:1994. Makes : As per list of recommended brands as catogory 12 makes : Kirloskar /Crompton /Texmo /CRI etc.,

Supply and fixing of stainless steel fly proof wire mesh of not less than 20 guage including cost and conveyance of alla materials and labour charges etc., complete

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges for placing and fixing in position as directed by Engineer-in-Charge.

Constructing 457.2mmX457.2mm (1'-6"X1'-6") brick in CM (1:6) prop. Masonry inspection chamber up to 914.4 mm (3'-0") and fitted with light weight 457.2 mm X 457.2mm 1'-6"X1'-6") CI frame and cover of 20kg including cost and conveyance of all materials and labour charges etc., complete.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work (APSS No. 901 & 903).

Providing high yield strength deformed (HYSD) steel TMT bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes including Cost and Conveyance of binding wire, cover blocks chains, overlaps, spacess, dowels, wastage etc, and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors

Providing and fixing factory made Solid Wood Polymeer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8 mm rigid layer on all the six surfaces. The Door frame will have a rebat of 32 mm with WPC Shutter 28-30 mm thick solid wood polymer composite (WPC) single extruded door shutter with 3 mm tp and bottom rigid layer with an overall density of 750 kg/cum. It will be fixed to the frame using 3 inch/4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame with all iron fittings etc., complete.

Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2100mm) .