Panchayat Raj Engineering Department Tender

PROVIDING WATER SUPPLY;Labour charges for Slotter cutting to 180mm dia 6kg/cm2 PVC casing pipe (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Survey & Investigation charges payable to Geologist for identifying sustainable source including hiring of zeep for conducting survey, engaging man mazdoor for helping during survey, fuel charges, crew charges etc., complete (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Providing 5.00 HP / 3 Phase Bore well Submersible Pumpset - 1No:- Manufacture and Supply and Transportation of 5.00 HP 5 Star rated Submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. - 5.00HP, 5-10Stage - ELEC-5.4.5 (b) Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Fabrication, Transportation and suplly of wall mounted Control Panel board of size 600x600x250 mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Redoxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc, complete consisting of the following equipment with all internal wiring using L&T/ Finolex copper FRLS cables of suitable size and capacity and cable clamp etc, complete for 3 phase motor pumpsets - ELEC - 5.4.17 (b) (1)Voltmeter: 0-500 V 96x96 mm size makes : L&T / C&S/ SALZAR/HPL/AEI/Meco/Rishab - 1No (2) Single Phase Preventor of suitable range makes : L&T /Minilec/ Powertech - 1 No (3) 0to 20 Amps/ 0.50 Amps Ammeter (96x96mm size) Makes:L&T / C&S/SALZAR/HPL/AEI/Meco/Rishab - 1 No (4).32 A TP, 10 KA MCB Makes: Legrand/ Schneider - 1 No. indication lamps (R-Y-B) with switch control - 1 Set voltmeter & Ammeter selector switch - 2 Nos. Supply and fixing of ISI Mark suitable capacitor makes: L&T / Siemens/Schneider/ PCos/Havells upto 7.5 HP with DOL Starter of Make C&S Crompton/ L&T/Siemens/BCH (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50mm dia GI pipe "B" class (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50mm dia GI heavy Couplings (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50mm dia GI Bends (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50 mm dia PN 1.6, D.I Double flanged Non return valve (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50 mm dia MS Flangeset (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50 mm dia MS Clampset (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 7/16 service wire (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 4.00 Sqmm 3 core flat copper cable (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 180mm dia PVC bore cover / Cap (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 75mm dia PVC FTA (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Labour charges for fixing of 5.00 HP/3 Phase Borewell submersible pumpset with all accessories (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Distribution pipeline with HDPE Pipes:- Earth work excavation by 2/3 machinery and 1/3 manually and depositing on bank with an intial lead and lift in all soils for pipeline trench of size 0.70x 1.00 m including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of HDPE pipes with necessary materials, testing the pipe line to the standard water pressure and refilling the trench with excavated soils to the original surface level etc., complete. including Cost of 75 mm dia @ 6 kg/cm2 HDPE PE-100 Grade pipes including Sluice valves, specaials including Over heads & Contractors profit at 13.615%

PROVIDING WATER SUPPLY;Providing 15mm dia House Hold Service connection as per Stanard specification:- Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%.9)