Panchayat Raj Engineering Department Tender

Cost, Supply and Fixing of 16X90 mm long Bolts and Nuts for 20 KL OHSR including all material and labour charges etc complete

Cost, Supply and Fixing of 6mm thick Rubber packing sheet(12X0.10 kgs) for 20 KL OHSR including all material and labour charges etc complete

Cost and Supply of the 75mm dia 6Kg/cm2 HDPE Pipes including cost and conveyance of all materials and all labour charges excluding taxes etc complete for 1.00mt of pipe Pummping main

Cost and Supply of the 90mm dia 6Kg/cm2 HDPE Pipes including cost and conveyance of all materials and all labour charges excluding taxes etc complete for 1.00mt of pipe Distribution lines

Cost and Supply of the 75mm dia 6Kg/cm2 HDPE Pipes including cost and conveyance of all materials and all labour charges excluding taxes etc complete for 1.00mt of pipe Distribution lines

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988, with its amendments and revisons there on excluding cost pipes and including its specials,lowering,laying and jointing of pipe lines true to alignments and gradient and gradient, trench excavition for pipe llines in all soils except Rock requring blasting (1/3 Manual and 2/3 machinary) and refilling trenches with watering and tamping and removing surplus earth from site of woork and filling pipe line with water and testing etc., complete. Pummpina main 75mm dia 6KG/cm2

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988, with its amendments and revisons there on excluding cost pipes and including its specials, lowering,laying and jointing of pipe lines true to alignments and gradient and gradient, trench excavition for pipe llines in all soils except Rock requring blasting (1/3 Manual and 2/3 machinary) and refilling trenches with watering and tamping and removing surplus earth from site of woork and filling pipe line with water and testing etc., complete. Distribution lines 90mm dia 6KG/cm2

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988, with its amendments and revisons there on excluding cost pipes and including its specials, lowering,laying and jointing of pipe lines true to alignments and gradient and gradient, trench excavition for pipe llines in all soils except Rock requring blasting (1/3 Manual and 2/3 machinary) and refilling trenches with watering and tamping and removing surplus earth from site of woork and filling pipe line with water and testing etc., complete. Distribution lines 75mm dia 6KG/cm2

Drilling of auger bore for laying of HDPE pipes duly filling with excavated soils including laying jointing testing of pipeline including cost of concrete saw cutter and removal with breker etc including all charges complete including overheads and contractors profit @ 13.615% but excluding gST and seignoge charges

Cutting road surface including stacking of excavated materials for pipeline trench work, cut opening of cement concrete road surface with concrete saw cutter and removal with breaker etc including all charges complete including overheads and contractors profit @ 13.615% but excludiong GST and seignoge charges 3502*1.13615

PCC(1:2:4) using 20mm HBG metal including cost and conveyance of all materials and labour charges, complete for restoration ( after deducting 50mm pipe dia) of cement concrete road cutting including ovarheads and contractor profit @ 13.615% but excluding GST and other taxes

House service connections (PP Saddle) PP excluding GST Clamp saddles-PP clamp Saddles shall be maunfactured by injection moulding using virgin polypropylene. Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be moulded with SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure plications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odiur & Flavour of water ii) Appearance of water iii) Growth of Micro Organism iv) Extraction of Substances that may be of concern to public health (Cyto toxicity) v) Extraction of Metals Cost and Supply of Flow Control Valve 20mm 5-10Lpm Supply and Fixing of compression fittings shall comply with ISO 17885 2015, PN-16 rating and manufactured from virgin resin of PE-80 having blue color. Raw material must be WRAS approved as per BS 6920 for effect on water quality intended for human consumption. Compression fittings should have moulded in SS 304 threaded insert outlet with thread dimension confirming to IS 554/ISO 7. The cost shall include testing of all materials, labor all taxes (central and state), inspection charges, transportation up to site, transit insurance, loading, unloading, stacking and fixing etc, complete as specified and directed by the departmental Engineer in charge. b)Compression male/female threaded Elbow with SS insert D20mmx1/2 inch a) Cost of 20mm dia OD HDPE pipe 16kg/cm2 b) Laying and jointing 20mm dia HDPE pipes including trench excavation upto 0.5mts depth including testing refilling etc complete S/F 15 mm Nominal bore GI Pipe medium grade properties as per IS 1239 ISI mark with GI fittings including cost of pipe & its fittings, labour charges etc., complete S&F of 12.7mm brass bib cock(longer body) Indian make heavy duty excluding GST

Construction of FHTCs stand post using 110mm PVC pipe 4Kg/Cm2 pipe 0.90mt as stand post and RCC(1:2:4) using 20mm HBG chips for Plat Form and inside 110mm PVC pipe etc complete