Panchayat Raj Engineering Department Tender

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Transportation of 7.50 HP- 12-16 Stages 5star rated submersible pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well.

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of 50 mm dia Nominal Bore GI B-Class Pipes properties & weight as per 1239 ISI mark with GI Fittings including the cost of pipe and its fittings including cost and conveyence of all materials and labour charges etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Run of 3 Core 2.50 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990 including laying charges as per standard specifications .

Augmentation of existing water supply scheme and providing FHTCs;Installation and commissioning of SP Set with all its accessories including transportation of chain block and other necessary equipment and all labour charges etc., complete for finished item of work

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Run of 10.00 Sqm WPSC ISI Alluminium Service Wire including cost of specials and conveyence of all materials etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of 50 mm dia MS Clampset including cost and conveyence of all materials and excluding labour charges

Augmentation of existing water supply scheme and providing FHTCs;Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1No Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells For 7.50 HP with Automatic Star Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH.

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of 180 mm dia MS Bore Cover including cost and conveyence of all materials and excluding labour charges

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of Gunmetal (GM) Non Return Valve as per IS:778 Class-I, Heavy duty 50 mm NB size including cost and conveyence of all materials and excluding labour charges

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of 50 mm dia Flange Set including cost and conveyence of all materials and excluding labour charges

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of 50 mm dia GI Bend including cost and conveyence of all materials and excluding labour charges

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of 50 mm dia GI Nipples including cost and conveyence of all materials and excluding labour charges

Augmentation of existing water supply scheme and providing FHTCs;Construction of pipe line for water supply with PVC 90 mm dia 6Kg/Cm2 pipes with trench excavation of size 0.75X1.00 mts as per IS:4985/1988, with its amendments and revisions these on including supply of pipes, specials as per requirements, lowering laying and jointing of pipe line with cement solvent true to alignment and gradient, trench excavation for pipe lines in all soils except rock requring blasting, and refilling trenches with excavated earth (other than rocky & and boulders) soils with watering and ramming and removing surplus earth from the pipe line and filling pipe line with required water pressure and testing etc., complete. The rates are including the cost of pipes and cost of specials at 1.20% and excluding the cost of CED. and including cost and conveyance of all materials and labour charges etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Construction of 40 KL capacity Over head service Reservoir with 12.90 mts staging of approved type design with VRCC framed structure M30 grade concrete single compartment inside dia of 5.00 mts & 2.40 mts Height walls the LWL being 0.15 meters above bottom slab, a free board of 0.15mts Below top slab and capable of holding 40,000 lts with salient levels as per departmental plan.The Reservoir should be provided with 2 Nos of D.I.Light type manhole frame with a cover of 600X600mm size RCC ventilator with copper or Stainless steel fly proof mesh with central RCC phenial of 600mm dia, RCC /Aluminium precast ladder 600mm width inside reservoir from floor level to roof level embeded at bottom with concrete as per standard pattern including cost, conveyance of all materials, labour charges and curing with all water leads etc, complete, one no of lighting arrestor of approved pattern with necessary earth connections, One no.of water level indicator of approved pattern,Stainless Steel Hand railing as per drawing at top around the tank and one no. of spiral stair case of 600mm width as per approved design with SS 304 hand railing of 1.20 mts height as per drawing outside the reservoir from ground level to roof level including painting with enamel paint of approved colour two coats over a primary coat of red-oxide including cost, conveyance of all materials, labour charges etc.,complete with inlet,outlet,over flow and scour arrangements upto ground level including fixing duckfoot bends at bottom rested in CC(1:2:4) mix using 20mm size machine crushed metal concrete bed of size 45X45X60cm as per the instructions of department excluding cost of pipes,valves and duck foot bends which will not be supplied by the department, including hoisting and joining of pipes and jointing materials and painting, with paint of approved colour two coats as directed by the department, construction of valve pits for scour valves with cover slab including construction of drains for scour and over flow arrangements etc., including outside plastering. The dog legged staircase shall be enclosed with brick/CRS wall on 3 sides and front side with MS collapsible gate up to first brace level from ground level. DI swan neck ventilators shall be provided in top dome and slab. in CM (1:3) and painting with two coats of snowcem over primary coat of white cement for out side area and three coats of epoxy paint to inner surface of the reservoir including roof slab complete including testing the reservoir, cost & conveyance of all materials, labour charges, centering charges, all water leads and including foundations of OHSR as per marking and details furnished by the departmental officers during the course of execution etc.,complete-including cost of steel and its fabrications charges as per Common SSR 2021-22.

Augmentation of existing water supply scheme and providing FHTCs;Supply and delivery, fixing of 80 mm dia CI D/F pipes 2.00 mt long - 26 Nos, 80 mm dia CI D/F pipes 0.90 mt long - 2 Nos, 80 mm dia CI D/F pipes 0.60 mt long - 6 Nos, 80mm dia CI Duck Foot Bend - 4 No, 80 mm dia CI Tail Pieces 0.60 Mts long - 2Nos, 80mm dia Bell mouth - 3 Nos, 80mm dia CI 90deg bends - 2 Nos, 80 mm dia DI Sluice Valves -3Nos, 80 mm dia CI Semicircular Bends -1No, Excluding constructon of Valve chambers etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Construction of pipe line for water supply with PVC 90 mm dia 4Kg/Cm2 pipes with trench excavation of size 0.70X1.00 mts as per IS:4985/1988, with its amendments and revisions these on including supply of pipes, specials as per requirements, lowering laying and jointing of pipe line with cement solvent true to alignment and gradient, trench excavation for pipe lines in all soils except rock requring blasting, and refilling trenches with excavated earth (other than rocky & and boulders) soils with watering and ramming and removing surplus earth from the pipe line and filling pipe line with required water pressure and testing etc., complete. The rates are including the cost of pipes and cost of specials at 1.20% and excluding the cost of CED. and including cost and conveyance of all materials and labour charges etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Construction of pipe line for water supply with PVC 75 mm dia 4Kg/Cm2 pipes with trench excavation of size 0.50X0.75 mts as per IS:4985/1988, with its amendments and revisions these on including supply of pipes, specials as per requirements, lowering laying and jointing of pipe line with cement solvent true to alignment and gradient, trench excavation for pipe lines in all soils except rock requring blasting, and refilling trenches with excavated earth (other than rocky & and boulders) soils with watering and ramming and removing surplus earth from the pipe line and filling pipe line with required water pressure and testing etc., complete. The rates are including the cost of pipes and cost of specials at 1.20% and excluding the cost of CED. and including cost and conveyance of all materials and labour charges etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Construction of Functional Hold Tap Connections (FHTCs) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%.