Panchayat Raj Engineering Department Tender

JALAJEEVAN MISSION(FHTCS);Cost and supply of 200mm dia PVC Dummy including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Geologist charges including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Supply and Transportation of 5.00HP,12-16 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes : As per list of recommended brands as category I. including all labour charges and including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes : As per list of recommended brands suitable Upto 7.5 HP with DOL Starter including all labour charges and including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Cost, Supply & Laying and Jointing of HDPE Pipe PE-100 DN 90mm 6kg/Cm2 pipe and laying and Jointing and using specials etc., in road crossings etc., including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Cost, Supply & Laying and Jointing of HDPE Pipe PE-100 DN 75mm 6kg/Cm2 pipe and laying and Jointing and using specials etc., in road crossings etc., including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Digging of Horizontal borewell of size 225 mm dia and inserting 150 mm dia CI pipe in to it a depth 2.7 m below B.T surface by digging a trench of size 7mx2mx2.7m on one side and 2mx2mx2.7m on other side including refilling of trench with excavated soil including arrangement for controlling of traffic by providing red flags,caution boards etc,bailing out of water by oilengines,transportation of CI pipes to workspot etc complete, excluding taxes (by Manual) including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Construction of Pipelines for water supply of HDPE PE-100 grade pipes as per IS specifications, with its amendments and revisions thereon including supplying of pipes, necessary spec8ials such as Bends, Tees etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, lamping and removing surpulus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifictions (Part-B, Volume-1) and as per drawing (Part-C, Volume-1). The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of Pipe Line work but exculding GST , the rare includes Overheads and Contractors profit @13.615% for 75 mm dia HDPE 6Kg/Cm2, By manual

JALAJEEVAN MISSION(FHTCS);Construction of Pipelines for water supply of HDPE PE-100 grade pipes as per IS specifications, with its amendments and revisions thereon including supplying of pipes, necessary spec8ials such as Bends, Tees etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, lamping and removing surpulus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifictions (Part-B, Volume-1) and as per drawing (Part-C, Volume-1). The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of Pipe Line work but exculding GST , the rare includes Overheads and Contractors profit @13.615% for 90 mm dia HDPE 6Kg/Cm2, By manual

JALAJEEVAN MISSION(FHTCS);Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%. (FHTCS 75 mm dia HDPE Pipe)

JALAJEEVAN MISSION(FHTCS);Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%. (FHTCS 90mm dia HDPE Pipe)

JALAJEEVAN MISSION(FHTCS);S&F 65mm Nominal Bore GI Pipe Medium Gradeproperties & weight as per IS 1236 with GI fittings such as elbow tees couplings, nipples, plugs includings excavation for trenches and refilling the trenches complete except for GI bends union and GI connection with checkout and socket tata or Zenith make or equivalent etc., complete including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450mm hole (for insertion of 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formtions suitable for Rotary drilling such as alluvium, Loamy, clayes, sandy, burried channels, highly distrubed and boulday zones high sheared and fractured zones followed by jointed to massive soft, medim, rock, all formations typical and suitable for rotary drilling etc., including insertio of casing pipe, couplings, cap, plug fixation, and including filling the perpheral gap with rebullied pebbled gravelpacking bore development, conducting yield test, and all other required in the fixation of pipes assemb ly etc., but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the department Geologist. The bore should be developed with campressor air untill clear water free from sand and other materials continuously discharged. The sixe of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The 112 pebbled gravel packing should be carried out in such a way that the theriticl quantity consurned completely. The entire work to be carried out as per I.S. 2800 Part-I&II of 1979 and including cost of all materials and all labour charges and execluding all taxes etc., complete for 350/450mm dia for insertion of pipe dia of 160/175/200mm including all labour charges and including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Cost and supply of 175mm dia PVC Blue casing Pipe including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Labour charges for Slotting PVC Blue casing pipe of 175mm including Trasportation to the work spot etc., including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Cost and supply of 200mm dia PVC Dummy including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Geologist charges including all labour charges and etc Complete including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Supply and Transportation of 2.00HP 25 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes : As per list of recommended brands as category I. including all labour charges and including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor,starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of complete.,. Makes : As per list of recommended brands including all labour charges and including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Cost, Supply & Laying and Jointing of HDPE Pipe PE-100 DN 90mm 6kg/Cm2 pipe and laying and Jointing and using specials etc., in road crossings etc., including all labour charges and including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Cost, Supply & Laying and Jointing of HDPE Pipe PE-100 DN 75mm 6kg/Cm2 pipe and laying and Jointing and using specials etc., in road crossings etc., including all labour charges and including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Digging of Horizontal borewell of size 225 mm dia and inserting 150 mm dia CI pipe in to it a depth 2.7 m below B.T surface by digging a trench of size 7mx2mx2.7m on one side and 2mx2mx2.7m on other side including refilling of trench with excavated soil including arrangement for controlling of traffic by providing red flags,caution boards etc,bailing out of water by oilengines,transportation of CI pipes to workspot etc complete, excluding taxes including all labour charges and including contractors profit @13.615% etc Complete

JALAJEEVAN MISSION(FHTCS);Construction of Pipelines for water supply of HDPE PE-100 grade pipes as per IS specifications, with its amendments and revisions thereon including supplying of pipes, necessary spec8ials such as Bends, Tees etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, lamping and removing surpulus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifictions (Part-B, Volume-1) and as per drawing (Part-C, Volume-1). The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of Pipe Line work but exculding GST , the rare includes Overheads and Contractors profit @13.615% for 75mm dia HDPE 6Kg/Cm2, By manual

JALAJEEVAN MISSION(FHTCS);Construction of Pipelines for water supply of HDPE PE-100 grade pipes as per IS specifications, with its amendments and revisions thereon including supplying of pipes, necessary spec8ials such as Bends, Tees etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, lamping and removing surpulus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifictions (Part-B, Volume-1) and as per drawing (Part-C, Volume-1). The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of Pipe Line work but exculding GST , the rare includes Overheads and Contractors profit @13.615% for 90mm dia HDPE 6Kg/Cm2, By manual

JALAJEEVAN MISSION(FHTCS);Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%. (FHTCS 75 mm dia HDPE Pipe)

JALAJEEVAN MISSION(FHTCS);Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%. For (FHTCS 90 mm dia HDPE Pipe)

JALAJEEVAN MISSION(FHTCS);S&F 65mm Nominal Bore GI Pipe Medium Gradeproperties & weight as per IS 1236 with GI fittings such as elbow tees couplings, nipples, plugs includings excavation for trenches and refilling the trenches complete except for GI bends union and GI connection with checkout and socket tata or Zenith make or equivalent etc., complete including all labour charges and including contractors profit @13.615% etc Complete