Panchayat Raj Engineering Department Tender

Providing, laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80.100 KN in stages to proper grade and camber, applying and brooming, stone screening /binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405 MORD/MORTH.404 (Grading -3 Using Graded matal ) by manual using HBG metal 60-63mm (50%) 40-45mm metal (46%) and HBG Machine crushed metal 1-22mm(4%) for compacted thickness of 75 mm but excluding VAT WBM Gr-II including overhead charges & Contractor profit, but excluding GST and Seignorage charges complete for finished item of work.

Providing and applying primer coat (low porosity) with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 Kg / Sqm using mechanical means as per technical specification clause 502 MORD ( for use wet mix macadam & WBM) including overhead charges & Contractor profit, but excluding VAT including overhead charges & Contractor profit, but excluding GSTand Seignorage charges complete for finished item of work.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Cluase 503 MORD.including overhead charges & Contractor profit, but excluding VAT including overhead charges & Contractor profit, but excluding GST and Seignorage charges complete for finished item of work.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing couse on a previously prepared base, including mixing a suitable plant, laying and rolling with a three wheel 0-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either type A or Type B or Type C as per technical specification clause 508 MORDincluding overhead charges & Contractor profit, but excluding GST and Seignorage charges complete for finished item of work.

Providing and laying bituminous premixed Seal coat (Type C) comprising of stone chipping of grading as defined in table 500.16 of MOST with Crushed stone chips of 6.7 mm size 100% passing through 9.5mm sieve and retained on 2.36 mm sieve applied @0.09 cum per 10sqm, chips to be premixed by mechanical means with the bituminous binder using 6.50 kgs of bitumen VG 30 grade for 10 sqm and rolling with power roller including of required line level, grade to serve as wearing course on previously prepared surface and finishing to required level and grades including cost and conveyance of all materials from approved sources and stacking at site to departmental gauge for premeasurements, labour charges and hire and operational charges of power road roller 8 to 10 tonnes capacity and all other machinery, tools and plants, providing barricading for diversion of traffic, erecting red flags other incidental and operational charges etc., complete for finished item of work as per technical specification clause 510 of MORD including contractors profit & Over head charges, VAT and Seigneorage etc., complete for seal coat

Total