Panchayat Raj Engineering Department Tender

PROVIDING WATER SUPPLY;Cost and supply and fixing of 180 mm dia PVC end cap (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Survey & Investigation charges payable to Geologist for identifying sustainable source including hiring of zeep for conducting survey, engaging man mazdoor for helping during survey, fuel charges, crew charges etc., complete (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Providing 5.00 HP/3 Phase Borewell submersible pumpset :- Supply and transportation of 5.00 HP, 5 Star rated submersible motor pumpset, confirming to IS:8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery, head and discharge with stainless steel shaft, Motor suitable for working on 415V±10%, Three Phase 50 Hz AC supply etc., complete for 4" Borewell Makes Kirloskar / Crompton /Texmo /CRI /KSB /Lubi /PSG / Aryan Varsha (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Fabrication, Transportation and suplly of wall mounted Control Panel board of size 600x600x250 mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Redoxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc, complete consisting of the following equipment with all internal wiring using L&T/ Finolex copper FRLS cables of suitable size and capacity and cable clamp etc, complete for 3 phase motor pumpsets - ELEC - 5.4.17 (b) (1)Voltmeter: 0-500 V 96x96 mm size makes : L&T / C&S/ SALZAR/HPL/AEI/Meco/Rishab - 1No (2) Single Phase Preventor of suitable range makes : L&T /Minilec/ Powertech - 1 No (3) 0to 20 Amps/ 0.50 Amps Ammeter (96x96mm size) Makes:L&T / C&S/SALZAR/HPL/AEI/Meco/Rishab - 1 No (4).32 A TP, 10 KA MCB Makes: Legrand/ Schneider - 1 No. indication lamps (R-Y-B) with switch control - 1 Set voltmeter & Ammeter selector switch - 2 Nos. Supply and fixing of ISI Mark suitable capacitor makes: L&T / Siemens/Schneider/ PCos/Havells upto 7.5 HP with DOL Starter of Make C&S Crompton/ L&T/Siemens/BCH (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50mm dia GI pipe "B" class

PROVIDING WATER SUPPLY;Cost and supply of 50mm dia GI heavy Couplings (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50mm dia GI Bends (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50 mm dia PN 1.6, DI Double Flanged Non return valve (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50 mm dia MS Flangeset (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 50 mm dia MS Clampset (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 7/16 service wire (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 4.00 Sqmm 3 core flat copper cable (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 180mm dia PVC bore cover / Cap (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Cost and supply of 75mm dia PVC FTA (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Labour charges for fixing of 5.00 HP/3 Phase Borewell submersible pumpset with all accessories (including contractor profit @ 13.615%)

PROVIDING WATER SUPPLY;Providing Pumping main with 75mm dia 6kg/cm2 HDPE (PE-100) Grade pipes:- Earth work excavation by 2/3rd Machinery & 1/3rd Manual and depositing on bank with an initial lead and lift in all soils for pipeline trench of size 0.70x1.00M including setting out, bracing, removal of stumps and otheer deleterious material and disposal upto a lead of 50M dressing of sides and bottom, lowering, laying and jointing of 75mm dia 4 kg/cm2 HDPE ppes with necessary jointing materials, testing the ppe line to the standard water pressure and refilling the trench with excavated soils to the original surface level etc. complete including over heads & contrctors profit at 13.615%

PROVIDING WATER SUPPLY;Providing Household Tap connections - 40 Nos:- 1) Supply and fixing of House service connections (PP Saddle) PP Clamp Saddles -PP Clamp Saddles shall be maunfactured by injection moulding using virgin polypropylene. Mechanical tapping saddles for water water works purposes anddesigned for use PVC/PE pipe as per IS 4985/IS4984 respectively.The PP Clam Saddle fittings shall be moulded with SS 304/Nickel plated brass female threddimension shall conform to IS 554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avaid leakage while pressure applications. Fasteners shall bethreaded type, with SS . Fasteners of size 125mm and above .The grade of raw material used must be certified by WRAS, UK for typetest as per BS6920 from their certified Laboratories like NSF International Ltd. UK and certificate of compliance to be produced for the following parameters:1) Odour & Flavour of water II) Appearance of water III)Growth of Micro Organism iv) Extraction of Substances that may be of Concern to publichealth (Cyto toxicity) v) Extraction of Metals (as per SOR 21-22 ) excluding GST -100 Nos 2)Cost,Supply , Delivery and fixing of compression fittings shall comply with ISO 17885 2015,PN -16 rating and manufactured from virgin resin of PE-80 having blue colour,. Raw material must be WRAS approved as per BS 6920 for human consumption. Compression fittings should have moulded in SS 304 threaded insert outlet with thread dimension conforming to IS 554/IS07. The cost shall include testing of all materials, labour all taxes (central and state) inspection charges,tranportation up to site ,manufacturing, loading,unloading, stacking, transportation but excluding GST - 100 Nos. 3) Cost,Supply , Delivery and fixing of compression fittings shall comply with ISO 17885 2015,PN -16 rating and manufactured from virgin resin of PE-80 having blue colour compression male/Female threaded adapter with SS insert D 20 mmx 1/2" - 200 Nos. 4) Cost,Supply & Delivery of 20mm OD MDPE pipe ( pipe series SDR 11 )PN 12.5 pressure class. - 300 Rmt. 5) Cost,Supply & Delivery of 15mm dia GI pipe medium grade properties &weight as per IS12391 ISI mark with GI fittings including cost of pipe and of pipe & its fittings , labour charges etc ., complete, but excluding GST - 140.0Rmt. 6) Cost,Supply & Delivery of 15mm dia brass body chromium plated finish bib tap of not less than 300 grams weight screw type ( full turn ) with internal / external threaded connection confirming to IS 8931 but excluding GST - 100 Nos. 7) RCC nominal mix - 8.0 cum 8)Including contractor' profit & overheads @ 13.615%.