Panchayat Raj Engineering Department Tender

RWSS;Labour charges for Slotter cutting to 180 mm dia PVC 6 Kg/Cm2 including CP @ 13.615%

RWSS;Towards conducting Geologist site investigation survey charges including hirign of vehicle from Nellore work spot and viceversa and labour charges etc complete including CP @ 13.615%

RWSS;Supply and Transportation of 5.00 HP 5 Star rated Submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. - 5.00HP, 5-10Stage - ELEC-5.4.5 (b) Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha including CP @ 13.615%

RWSS;Fabrication ,transportationand and supply of wall mounted Control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets - .ELEC-5.4.17 (b) Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1 No Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells. Upto 7.5 HP with DOL Starter of. Make C&S.Crompton / L&T / Siemens/BCH.

RWSS;Cost and supply of PVC insulated and PVC sheathed, flexible 3 core flat type cable 2.50 Sqmm for submersible pumpsets,conductors composed of annealed high conductivity copper wire, confirming to IS 694 & its revisions and amendments from time to time delivery at site of installation of pumpsetincluding CP @ 13.615%

RWSS;Cost and supply of 7/16 Alluminium service wire of standard make including CP @ 13.615%

RWSS;Supply of Galvanised Mild steel pipes (Medium class of 50 mm dia nominal bore) confirming to IS 1239 / Part I /1990 continuously welded ERW / HFIW type and screwed at both ends as per IS 554 one end with socket (Heavy class) as per IS 1239 / Part II / 1992 and other fitted with plastic ring and delivery in small quanities at work site of pump installation with replacement guarentee for a period of six months on installation for exact length of 3 metres etc complete including CP @ 13.615%

RWSS;Cost and supply of 50 mm dia GI heavy Coupling including CP @ 13.615%

RWSS;Cost and supply of 50 mm dia GI Bends including CP @ 13.615%

RWSS;Supply and delivery of DI Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia, confirming to IS - 5312 (Pts-1 & 2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring, Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (IS 318); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including Transportation complete and including CP @ 13.615%

RWSS;Cost and supply of 50 mm dia MS Flangeset including CP @ 13.615%

RWSS;Cost and supply of 50 mm dia MS Clampset including CP @ 13.615%

RWSS;Cost and supply and fixing of 180mm dia PVC end cap including CP @ 13.615%

RWSS;Cost and supply of 75 mm dia PVC FTA including CP @ 13.615%

RWSS;Conveyance charges including CP @ 13.615%

RWSS;Installation and erection charges of pumpset including erection, earthing, testing & commissioning, fixing panel board with its accessories, fixing GI pipes & specials, valves etc., complete including CP @ 13.615%

RWSS;Earth work excavation by 2/3 machinery and 1/3 manually and depositing on bank with an intial lead and lift in all soils for pipeline trench of size 0.70x 1.00 m including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 90 mm dia 6kg/cm2 PVC pipes PVC pipes with necessary materials, testing the pipe line to the standard water pressure and refilling the trench with excavated soils to the original surface level etc., complete. including Over heads & Contractors profit at 13.615%

RWSS;Cost and supply of 90 mm dia 6kg/cm2 PVC pipe including Over heads & Contractors profit at 13.615%

RWSS;Earth work excavation by 2/3 machinery and 1/3 manually and depositing on bank with an intial lead and lift in all soils for pipeline trench of size 0.70x 1.00 m including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 75mm dia 6kg/cm2 PVC pipes PVC pipes with necessary materials, testing the pipe line to the standard water pressure and refilling the trench with excavated soils to the original surface level etc., complete. including Over heads & Contractors profit at 13.615%

RWSS;Cost and supply of 75 mm dia 6kg/cm2 PVC casing pipe including Over heads & Contractors profit at 13.615%

RWSS;Earth work excavation for foundation in as per drawing and technical specifications Clause 305.1 including setting ot, construction of shoring and bracing removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per techincal specification 305 MOD / 304 MORTH

RWSS;Plain Cement Concrete to (1:4:8) portion nominal mix (Cement fine aggregate: Coarse aggreagte) using 40 mm size HBG metal from approved quarry including cost and conveyance of all materials like Cement, Sand coarse aggregate, water etc., to site, including seignourage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete etc., complete for finished item of work for Foundations and flooring for machine mixing

RWSS;Brick masonry with cm (1:6) proportion using II nd class bricks traditional size 23x11x7 cm from approved source haing crushing strength not less than 35 kg / sqm including cost and conveyance of all materials like cement, sand bricks, water etc., to site including seignourage charges sales and other taxes on all materials and all operational, incidental andlabour charges such as mixing cement mortar, curing scafolding charges, counstructing masonary, lift charges curing etc complete for finished item of work for foundation and basement

RWSS;Sand filling in foundation and basement for works including cost and conveyance of all materials and labour charges, seigourage charges, watering and tamping etc complete

RWSS;Plastering with CM (1:5) 12mm thick including cost and conveyace of all materials like cement, sand, water etc to site, cost of seignourage charges and all other taxes on all materials and operational, incidental charges and all labour charges for mixing mortar, finishing, scafolding, lift charges, curing including cutting grooves etc., as directed by Engineer-In-Charge, complete

RWSS;Supplying, fitting and placing HYSD bar reinforcement as per drawings and technical specifications, including overlaps and wastage, where they are not welded including cutting, bending, placing in postion tying grills including cost of binding wire etc., complete

RWSS;RCC M-20 Nominal mix (Cement : fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc to site and including seignourages charges, sales and other taxes on all materials including all operational and labour charges such as machine mixing, laying concrete, curing etc., complete including cost of steel and its fabrication charges for finished item of work, including centering, shutteing for Precast top slab including CP @ 13.615 %

RWSS;Painting with Snowcem or other equal and approved water proof cement paint over primary coat (all colours)

RWSS;Supply and fixing of MS welded grill gate of size 0.60 x 0.70 M including cost and conveyance of all materials, labour charges and fabrication charges etc complete

RWSS;Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and diposal upto a lead of 50m dressing of sides and bottom and backfilling in ternches with excavated suitable materials as per Technical Specification 305 MORD / 304 Morth including CP @ 13.615%

RWSS;Cost and supply of 75 mm dia PVC Service Saddle including CP @ 13.615%

RWSS;Cost and supply of 20 mm dia GI Pipe "B" Class including CP @ 13.615%

RWSS;Cost and supply of 20 mm dia GI Elbow including CP @ 13.615%

RWSS;Cost and supply of 20 mm dia 10 kg/cm2 PVC pipe including Over heads & Contractors profit at 13.615%

RWSS;Cost and supply of 20 mm dia PVC Elbows including CP @ 13.615%

RWSS;Cost and supply of 15 mm dia Brass Ferrule including CP @ 13.615%

RWSS;Cost and supply of 20 mm dia GI Coupling including CP @ 13.615%

RWSS;Cost and supply of 20 mm dia GI Union including CP @ 13.615%

RWSS;Cost and supply of 20 mm dia GI Nipple 0.15 M Long including CP @ 13.615%

RWSS;Cost and supply of 20 mm dia GI Waste not Tap including CP @ 13.615%

RWSS;Labour charges for fixing of public taps including CP @ 13.615%