Panchayat Raj Engineering Department Tender

Drinking Water Supply;Geologist charges for conducting Integrated Hydrological and geophysical survey for selection of bore well source etc complete.

Drinking Water Supply;Cost and supply of PVC Bore cap sustainable for 180mm dia PVC pipe used for bore wells.

Drinking Water Supply;Supply and Transportation of 2.00 HP / 25 Stages, Single Phase ISI submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha

Drinking Water Supply;Fabrication, transportation and supply of suitable size panel boar for single phase submersible motor 2.00 HP consisting and running capacitors, Voltmeter, Ammeter, Indicator lamps, MCB, on/off switch including supply and fixing of DOL starter of make C&S/LTL/Seimens/BCH/KSP (Karunya)/Crompton. complete..

Drinking Water Supply;Cost and supply of 42 / 32mm dia UPVC raising columns pipe with standing upto 20kg /cm2 upto 200mts. For sutable motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 kgs weights.

Drinking Water Supply;Cost and supply of 3 core 2.50 Sqmm flat copper cable wire including cost and conveyance of all materials and labour charges etc complete

Drinking Water Supply;Cost and supply of 40mm dia MS Clamp set including cost and conveyance of all materials and labour charges etc complete

Drinking Water Supply;Cost and supply of 7/16 Sqmm dia Alluminium service wire including cost and conveyance of all materials and labour charges etc complete

Drinking Water Supply;Cost and supply of 50mm dia GM Non Return Valve including cost and conveyance of all materials and labour charges etc complete

Drinking Water Supply;Errection, Installation and testing charges for 2.00 HP / 25 stages Single Phase motor pumpset for errecton into the bore well source with required accessories using chainpully and tripod including cost and conveyance of all materials and labour charges etc complete

Drinking Water Supply;Construction of pipelines for water supply with 140m dia 6 Kg/Cm2 HDPE PE-100 grade pipes as per IS Specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation 2/3rd machinery and 1/3rd manual for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (Part-B, Volume-I) and as per drawing (Part-C, Volume-1). The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST and Seigniorge charges, including overheads and contractor's profit @ 13.615%.

Drinking Water Supply;Construction of pipelines for water supply with 110m dia 6 Kg/Cm2 HDPE PE-100 grade pipes as per IS Specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation 2/3rd machinery and 1/3rd manual for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (Part-B, Volume-I) and as per drawing (Part-C, Volume-1). The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST and Seigniorge charges, including overheads and contractor's profit @ 13.615%.

Drinking Water Supply;Construction of pipelines for water supply with 90m dia 6 Kg/Cm2 HDPE PE-100 grade pipes as per IS Specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation 2/3rd machinery and 1/3rd manual for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (Part-B, Volume-I) and as per drawing (Part-C, Volume-1). The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST and Seigniorge charges, including overheads and contractor's profit @ 13.615%.

Drinking Water Supply;Construction of pipelines for water supply with 75m dia 6 Kg/Cm2 HDPE PE-100 grade pipes as per IS Specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation 2/3rd machinery and 1/3rd manual for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (Part-B, Volume-I) and as per drawing (Part-C, Volume-1). The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST and Seigniorge charges, including overheads and contractor's profit @ 13.615%.

Drinking Water Supply;Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%.

Drinking Water Supply;Manufacture, supply and delivery of DI D/F Gate Valves (Sluice) Non-Rising stem conforming to IS 14846/2000 with amendments No. 1&2 heavy duty with CI grade FG 260 as per IS:210. Two coats of primer suitable for EPOXY PAINTS finish shall be applied to all metal surface and finally two coats of Epoxy Paint. The valves shall be tested for (closed end test) against Hydrostatic test requirement. The rates are excluding transportation. Central Exise duty and sale tax etc., including the cost for enclosed Super gear arrangement with trust bearing for easy operation. ISI marked for 80mm dia DI Gate (Sluice) Valves for 75mm dia 6kg/cm2 HDPE pipeline