Panchayat Raj Engineering Department Tender

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of Nylon Mesh including cost and conveyence of all materials and excluding labour charges

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Transportation of 15.00 HP- 16-24 Stages 5star rated submersible pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well.

Augmentation of existing water supply scheme and providing FHTCs;Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1No Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells From 15.00 to 20.00 HP with Automatic Star Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH.

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Run of 3 Core 4.00 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990 including laying charges as per standard specifications .

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of 50 mm dia Nominal Bore GI B-Class Pipes medium grade properties & weight as per 1239 ISI mark with GI Fittings including the cost of pipe and its fittings including cost and conveyence of all materials and labour charges etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Run of 6.00 Sqm WPSC Alluminium Service Wire including cost of specials and conveyence of all materials etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of Gunmetal Horizontal Non Return Valve Heavy duty including cost and conveyence of all materials and all labour charges etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of 50 mm dia MS Flange Set including cost and conveyence of all materials and all labour charges etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply and Fixing of 180 mm dia Bore Cover including cost and conveyence of all materials and all labour charges etc., complete

Augmentation of existing water supply scheme and providing FHTCs;Installation and commissioning of 15 HP SP Set with all its accessories including transportation of chain block and other necessary equipment and all labour charges etc., complete for finished item of work

Augmentation of existing water supply scheme and providing FHTCs;Construction of pipe line for water supply with as per IS:4985/1988, with its amendments and revisions these on including supply of pipes, specials as per requirements, lowering laying and jointing of pipe line with cement solvent true to alignment and gradient, trench excavation for pipe lines in all soils except rock requring blasting, and refilling trenches with excavated earth (other than rocky & and boulders) soils with watering and ramming and removing surplus earth from the pipe line and filling pipe line with required water pressure and testing etc., complete. The rates are including the cost of pipes and cost of specials at 1.20% and excluding the cost of CED. and including cost and conveyance of all materials and labour charges etc., complete For 90 mm dia 6 Kg/cm2 HDPE pipes

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply, Delivery and fixing of (P.N.1.60) Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG- 500/7 or Equivalent as per IS1865, IS:3896- 2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and including Transportation, CI air tee of 250x250x80 mm dia, 250 mm CI D/F Pipe 0.60 mts long 2 No.s, 80mm dia CI Pipes 2.00 Mts Long, MTA, MS thereaded flanges, jointing meterials such as bolts nuts and, rubber washers including meterials cost for main line and air valves fixing, labour charges for fixing of CI Pipes and tees and fixing of vlaves, etc., completed. 50 mm dia DI Air Valve P.N.1.60

Augmentation of existing water supply scheme and providing FHTCs;Cost, Supply, delivery and Fixing "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG- 400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN- 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation including DI Flanged sockets, jointing meterials such as bolts nuts and rubber washers including meterials cost for main line labour charges for Flanged Joints and Lowering of valves, etc., completed. 80mm dia Sluice Valves P.N.1.60

Augmentation of existing water supply scheme and providing FHTCs;Construction of pipe line for water supply with as per IS:4985/1988, with its amendments and revisions these on including supply of pipes, specials as per requirements, lowering laying and jointing of pipe line with cement solvent true to alignment and gradient, trench excavation for pipe lines in all soils except rock requring blasting, and refilling trenches with excavated earth (other than rocky & and boulders) soils with watering and ramming and removing surplus earth from the pipe line and filling pipe line with required water pressure and testing etc., complete. The rates are including the cost of pipes and cost of specials at 1.20% and excluding the cost of CED. and including cost and conveyance of all materials and labour charges etc., complete For 90 mm dia 6 Kg/cm2 HDPE pipes

Augmentation of existing water supply scheme and providing FHTCs;Construction of Functional Hold Tap Connections (FHTCs) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%.