Panchayat Raj Engineering Department Tender

Supply & Fixing of 50 mm dia Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete excluding all taxes etc complete.

Supply & Fixing of 3 Core 4.00 Sqmm Flat Copper cable of ISI for Submersible Motors of makes Finolex / Polycab / Gold Medal excluding all taxes etc complete.

Supply & Fixing of 50mm dia MS Clamp Sets ( 2 Nos )including cost and conveyance of all materials and labour charges etc complete but excluding taxes.

Supply and Fixing of 50mm dia CI Non Return Valve as per IS-778 1st Class heavy duty including cost and conveyance of all materials and labour charges etc complete but excluding all taxes.

Supply & Fixing of 50mm dia MS Flange Sets including cost and conveyance of all materials and labour charges etc complete but excluding taxes.

Supply & Fixing of 50mm dia GI Bends including cost and conveyance of all materials and labour charges etc complete but excluding taxes.

Supply & Fixing of 180mm dia Bore Cap including cost and conveyance of all materials and labour charges etc complete but excluding taxes.

Installation and commissioning of 10.0 HP submerssible pumpset with all its accessories including transportation of chain block and other necessary equipement and all labour charges etc. complete

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 2.00 Mts length at Inlet Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.90 Mts length at Inlet Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.60 Mts length at Inlet Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.60 Mts length Tail Pieces at Inlet Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes o Bell Mouth at Inlet Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes Duck Foot Bend at Inlet Connection

Supply and Fixing of 100mm dia PN 1.60 (MPa) "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 2.00 Mts length at Out Let Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.90 Mts length at Out Let Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.60 Mts length at Out Let Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes Duck Foot Bend at Out Let Connection

Supply and Fixing of 100mm dia PN 1.60 (MPa) "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 2.00 Mts length at Scour Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.90 Mts length at Scourt Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.60 Mts length at ScourConnection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes Duck Foot Bend at Scour Connection

Supply and Fixing of 100mm dia PN 1.60 (MPa) "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 2.00 Mts length at Over Flow Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.90 Mts length at Over Flow Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.60 Mts length at Over Flow Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes of 100mm dia 0.60 Mts length Tail Pieces at Over Flow Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes o Bell Mouth at Over Flow Connection

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes Duck Foot Bend at Over Flow Connection

Supply and Fixing of 1/2" to 1" Bolts and nuts with double washers including cost and conveyance of materials and all taxes etc., complete.,

Supply and Fixing of 3 to 6mm thick rubber packng including cost and conveyance of all materials and all taxes etc., complete.,

Construction of pipe line for water supply with HDPE 90 mm dia 6kg/cm2 Pipes, PE 100 including earth work excavtion for pipe line trench of size 0.70 X 1.00 M using 2/3 quantity with Machinary and 1/3 quantity with manual in all soils except Rock requiring blasting, lowering, laying and jointing of pipe lines true to alignment and gradient and refilling trenches with excavated earth (other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete but including cost of HDPE 90 mm dia 6kg/cm2 Pipes and its specials.

Construction of pipe line for water supply with 75 mm dia 6kg/cm2 HDPE Pipes, PE 100 including earth work excavtion for pipe line trench of size 0.70 X1.00 M using 2/3 quantity with Machinary and 1/3 quantity with manual in all soils except Rock requiring blasting, lowering, laying and jointing of pipe lines true to alignment and gradient and refilling trenches with excavated earth (other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete but including cost of HDPE 75 mm dia 6kg/cm2 Pipes and its specials.

Construction of pipe line for water supply with 63 mm dia 4kg/cm2 HDPE Pipes, PE 100 including earth work excavtion for pipe line trench of size 0.50 X0.75 M using 2/3 quantity with Machinary and 1/3 quantity with manual in all soils except Rock requiring blasting, lowering, laying and jointing of pipe lines true to alignment and gradient and refilling trenches with excavated earth (other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete but including cost of HDPE 63 mm dia 6kg/cm2 Pipes and its specials.

Supply and Fixing of 80 mm dia B'Class Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent

Supply and Fixing of 65 mm dia B'Class Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent

Supply & Fixing of 50 mm dia Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete excluding all taxes etc complete.

Supply and Fixing of 80mm dia PN 1.60 (MPa) "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation

Cutting Open CC Road surface with concrete saw cutter and removal with breaker including Cement Concrete of all meterials and labour charges for giving house hold tap connectons

Supply & Fixing of House Service connection (PP Saddle) PP clamp saddles PP clamp saddles shall be manufactured by injection moulding using virgin polypropylene. Mechanical tapping saddles for water works purposed and designed for use with PVC(PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded in with Nickel plated brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic washer with SS. The PP clamp saddle fittings shall be moulded with SS. The Pp clamp saddle fittings shall be moulded with SS 304/ Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS 554/ISO-7. Adequate thickness of PP shall be provided to Hold bras insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 form their certified laboratories like NSF International Ltd., UK and certificate of compliance to be produced for the following parameters i) Odour & Flavour of water ii) Appearance of water iii) Growth of Micro Organism iv) Extraction of Substances that may be of concern to public health (Cyto Toxicity) v) Extraction of Metals excluding all taxes (as per SoR 2022-23) with Cost and supply of tamper proof house hold Non return cum flow control valve (with all three parts made by using sold steel bars of SS 316) with CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEO manual) including cost of materials, manufacturing, loading, unloading, stocking, transit insurance, transpiration but excluding GST with Compression male / female threaded adaptor with SS insert D20mm X ½” with Compression male / female threaded adaptor with SS insert D20mm X ½” with Manufacture, supply & delivery of HDPE pipe confirming to IS 4984-2016 of PE-100 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation excluding all taxes with 20mm OD HDPE pipe 16.0 Kg/Sqcm with Laying, Jointing of 20mm dia HDPE pipes as per BIS No.7634 Part-II/75 including treanch excavation upto 0.50mts depth including testing, refilling etc., complete with Cost, supply & fixing of 15mm Nominal Bore GI pipe Medium Grade properties & Weight as per IS 12391 ISI mark with GI Fittings including the cost of pipe & its fittings, labour charges etc., complete excluding GST with S&F of 12.7mm brass bib cock (long body) Indian make heavy duty excluding GST and including Contract Profit 13.615% For 90 mm X 1/2" with Support FHTCs