Panchayat Raj Engineering Department Tender

RWS;Supplying, fitting and placing HYSD bar reinforcement as per drawings and technical specifications, including overlaps and wastage, where they are not welded including cutting, bending, placing in postion tying grills including cost of binding wire etc., complete including CP @ 13.615 %

RWS;VRCC M-20 Nominal mix (Cement : fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc to site and including seignourages charges, sales and other taxes on all materials including all operational and labour charges such as machine mixing, laying concrete, curing etc., complete including cost of steel and its fabrication charges for finished item of work, including centering, shutteing for Foundations, Plunth, Pedestals including CP @ 13.615 %

RWS;VRCC M-20 Nominal mix (Cement : fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc to site and including seignourages charges, sales and other taxes on all materials including all operational and labour charges such as machine mixing, laying concrete, curing etc., complete including cost of steel and its fabrication charges for finished item of work, including centering, shutteing for COLUMNS up to GL including CP @ 13.615 %

RWS;VRCC M-20 Nominal mix (Cement : fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc to site and including seignourages charges, sales and other taxes on all materials including all operational and labour charges such as machine mixing, laying concrete, curing etc., complete including cost of steel and its fabrication charges for finished item of work, including centering, shutteing for GL Beam including CP @ 13.615 %

RWS;VRCC M-20 Nominal mix (Cement : fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc to site and including seignourages charges, sales and other taxes on all materials including all operational and labour charges such as machine mixing, laying concrete, curing etc., complete including cost of steel and its fabrication charges for finished item of work, including centering, shutteing for COLUMNS up to roof level including CP @ 13.615 %

RWS;VRCC M-20 Nominal mix (Cement : fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc to site and including seignourages charges, sales and other taxes on all materials including all operational and labour charges such as machine mixing, laying concrete, curing etc., complete including cost of steel and its fabrication charges for finished item of work, including centering, shutteing for front beam over shutter including CP @ 13.615 %

RWS;Brick masonry with cm (1:6) proportion using II nd class bricks traditional size 23x11x7 cm from approved source haing crushing strength not less than 35 kg / sqm including cost and conveyance of all materials like cement, sand bricks, water etc., to site including seignourage charges sales and other taxes on all materials and all operational, incidental andlabour charges such as mixing cement mortar, curing scafolding charges, counstructing masonary, lift charges curing etc complete for finished item of work for foundation and basement

RWS;Cost and supply and fixing of cement of jolly of 50 mm thick including cost and conveyance of all materials labour charges etc complete including CP % 13.615%

RWS;Earth work excavation for foundation in as per drawing and technical specifications Clause 305.1 including setting ot, construction of shoring and bracing removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per techincal specification 305 MOD / 304 MORTH for entrance steps including CP @ 13.615%

RWS;Sand filling in foundation and basement for works including cost and conveyance of all materials and labour charges, seigourage charges, watering and tamping etc complete including CP @ 13.615 %

RWS;Plain Cement Concrete to (1:4:8) portion nominal mix (Cement fine aggregate: Coarse aggreagte) using 40 mm size HBG metal from approved quarry including cost and conveyance of all materials like Cement, Sand coarse aggregate, water etc., to site, including seignourage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete etc., complete for finished item of work for Foundations and flooring for machine mixing including CP @ 13.615 %

RWS;Supply and fixing of 50x50x4.5 mm MS section pipe including cost and conveynce of all materials, labour charges etc complete (6.02 Kg/RM) including CP @ 13.615 %

RWS;Roofing provided with 0.50 M thick galvanized / pre painted GI profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl type. The sheets are provided with anti capillary grove (BMS-W.45 & MAT-01615) including CP @ 13.615 %

RWS;Brick masonry with cm (1:6) proportion using II nd class bricks traditional size 23x11x7 cm from approved source haing crushing strength not less than 35 kg / sqm including cost and conveyance of all materials like cement, sand bricks, water etc., to site including seignourage charges sales and other taxes on all materials and all operational, incidental andlabour charges such as mixing cement mortar, curing scafolding charges, counstructing masonary, lift charges curing etc complete for finished item of work for foundation and basement

RWS;Supply and fixing of Sal wood pannelled window of size 0.91 x 1.22 M including cost and supply of Salwood for frames, styles and rails and planks, cost of 10 mm dia square rods and window furniture and fittings, including labour, wrought and putup in position of frames and shutters etc., complete including CP @ 13.615 %

RWS;Plastering with CM (1:5) 12mm thick including cost and conveyace of all materials like cement, sand, water etc to site, cost of seignourage charges and all other taxes on all materials and operational, incidental charges and all labour charges for mixing mortar, finishing, scafolding, lift charges, curing including cutting grooves etc., as directed by Engineer-In-Charge, complete

RWS;Plastering with CM (1:5) 20 mm thick including cost and conveyace of all materials like cement, sand, water etc to site, cost of seignourage charges and all other taxes on all materials and operational, incidental charges and all labour charges for mixing mortar, finishing, scafolding, lift charges, curing including cutting grooves etc., as directed by Engineer-In-Charge, complete

RWS;Painting with Snowcem or other equal and approved water proof cement paint over primary coat (all colours)

RWS;Supply and fixing of Rolling shutter made of 80x125 mm machine rolled CRCA laths interlocked together through their entire length and jointed together at the ends by end-lockers monted on specially designed pipe shaft of 50 mm dia nominal bore MS B Class pipe with brackets plate guide channels, stoppers bottom lockening plates and arrangment for inside and outside locking with etc., completed including CP @ 13.615 %

RWS;Painting with synthetic enamel paint two coats over primary coat including cost and conveyance of all materials, labour charges etc complete for shutter ( iron work) including CP @ 13.615 %

RWS;Painting with synthetic enamel paint two coats over primary coat including cost and conveyance of all materials, labour charges etc complete for Window ( wood work) including CP @ 13.615 %

RWS;Providing Name Board with best enamel paint including caring letter etc., complete including CP @ 13.615 %

RWS;Cost, Supply, Erection and 1 Month trial run of 1000 LPH Capacity RO Plant machinery as per IS 1055-2013 with required capacity UV Lamp and containing following items, the membrane should be firmtech or of any standard make, sand and carbon filters should be as per BIS specifications, the raw water container of 3000 Lts and the fresh water container of 2000 Lts capacity with SS material 4u thick (4 Microns thick) and fixed at elevated platform stand as per BIS specification, it should be fied with buld meter of required dia with stainer, all the inter connections should be made as per standard BIIS specifications. The units shall be fied with atleast 3 parts with butterfly valves should be made, necessary electrical connections shall be made by the supplier, the unit shall be run for atleast one month without interruptions and the unit shall be inspected by the supplier for one year, at two months interval / at break down. The supplier shall provide all consumables and spares necessary for one year. The rate excluding all taxes.