Panchayat Raj Engineering Department Tender

Filling in foundation trenches with stone dust including filling , watering and ramming etc complete per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH. Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for (APSS No. 402) bed concrete to flooring for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST

Supply and placing of the M 25 Design mix Supply and placing of the Design Mix Concrete corresponding to IS 456 using /MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work. Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GSTfor Columns

Supply and placing of the M 25 Design mix Supply and placing of the Design Mix Concrete corresponding to IS 456 using /MIXER with 20-10 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work. Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GSTfor Plinth Beam

Supply and placing of the M 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20- 10 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges ,including centering, shuttering. etc., complete for finished item of work (APDSS No. 402) including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST for roof Beam

Supply and placing of the M 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20- 10 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges ,including centering, shuttering. etc., complete for finished item of work (APDSS No. 402) . Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST for roof slab 125mm thick

Supply and placing of the M 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20- 10 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges , including centering, shuttering. etc., complete for finished item of work (APDSS No. 402) Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST for lintels

Supply and placing of the M 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20- 10 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges , including centering, shuttering. etc., complete for finished item of work (APDSS No. 402) Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST for sunshades of 0.60 Mts width and( 0.05+0.075)/2 Mts thick.

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, and curing etc., complete with a compresive strength not lessthan 50 kg/sqm for walls., for finished item of work. (APSS No. 501 & 504). Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST for basement

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm for walls., for finished item of work. (APSS No. 501 & 504). Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST for Superstructure Walls

Supply and fixing of Best Medium Teak wood Door of Size 1.20 x 2.10 mts with all specified MS power coated fixtures like Z Hold fasts,But Hinzes, Tower bolts, wind appliances, locking arrangements, handles as per approved design and standard specifications , including cost and conveyance of all materials and labour chargesetc complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but Exculding GST

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm)..Including Overheads & Contractors Profit @13.615% etc.complete but Exculding GST

Plain Cement Concrete corresponding to M7. 5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) for Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST for Dummy Columns

Plastering with CM (1:5), 12 mm thick isingle coat using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST

Ornamental plastering for Ceiling with CM(1:5) Prop:8mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906) for mixing mortar, finishing, curing as directed by Engineer-in-charge etc Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but Exculding seigniorage charges & GST

Providing High Yield Strength Deformed (HYSD) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. , Including Overheads & Contractors Profit @13.615% etc.complete but Exculding GST