Panchayat Raj Engineering Department Tender

Providing FHTCs in Jammalamadaka habitation by utilizing existing infrastructure and Retrofitting Au;Construction of pipe line for water supply with 75mm dia 4 Kg/cm2 PVC pipes as per IS:4985-1988, with its amendments and revisions there on including supply of pipes, specials, lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for pipe lines in all soils, 100 mm thick stone dust filling and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipe line with water and testing etc., complete with 1/3rd manual and 2/3rd Machinery for pipe line trench of size 0.70x1.00m

Providing FHTCs in Jammalamadaka habitation by utilizing existing infrastructure and Retrofitting Au;Construction of pipe line for water supply with 90mm dia 4 Kg/cm2 PVC pipes as per IS:4985-1988, with its amendments and revisions there on including supply of pipes, specials, lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for pipe lines in all soils, 100 mm thick stone dust filling and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipe line with water and testing etc., complete with 1/3rd manual and 2/3rd Machinery for pipe line trench of size 0.70x1.00m

Providing FHTCs in Jammalamadaka habitation by utilizing existing infrastructure and Retrofitting Au;Supply and delivery of 80mm dia "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.