Panchayat Raj Engineering Department Tender

Filling with Selected Earth in trenches, sides of foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc. complete including cost and conveyance of sand for finished item of work. (APSS No 309 & 310). Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Refilling with Execavated Earth in trenches,sides of foundations & basement from approved quarry in layers not exceeding 15cm thick,consolidating. Each deposited layer by watering and ramming,including all operational,incidental,labour charges, hire charges of T & p etc., complete including cost and conveyance of gravel for finished item of work.(APSS No.309 & 310 Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)- For Columns Footings Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)- For Pedastals Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)- For Plinthbeams Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)- For Columns Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)- For Roofbeams Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)- For Roofslab 125mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using Fly ash lime solid blocks of size -290 x 225 x 140 mm and having minimum crushing strength of 50 Kg/Sqcm and using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust for manufacturing of Fly ash lime solid blocks including cost and conveyance of all materials to site, including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504). Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Brick Masonry for panel walls in superstructure with CM (1:8) prop: (cement : sand) using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504). Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supplying , fitting and placing HYSD / TMT bar reinforcement in VRCC works complete as per drawings and technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded including cost and conveyance of steel , binding wire etc., lifting charges of steel , placing in position, tying with binding wire , all tools etc., complete for finished item of work Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Providing impervious coat to exposed RCC Roof Slab surfaces to required slopes with CM (1:3) prop. 20mm thick (average) mixing with water proofing compound from reputed manufacturers as approved by Engineer-in- charge at 1 Kg/bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of materials like cement, sand, water proofing compound etc., to site, cost of seigniorage charges and all other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete for finished item of work (APSS No. 901 & 903). Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:3) including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) . Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) - Internal Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Plain Cement Concrete (1:2:4 )Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, laying concrete, vibrating,lift charges, curing etc., complete for finished item of work for steps (APSS No. 402 & 403) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and fixing of Sal wood Door Double shutter framed and planked door of size 1.20 x 2.10mt with frame made of well seasoned sal wood scantlings of size 100 x125 mm mm and shutter made of side styles 125 X 32.5mm, top rail 125 X 32.5mm, bottom rail 125 X32.5mm Lock rail 200 X 32.5mm and Frieze & intermediate rails of 125 x 32.5 mm and panels - 8 no's are of 20mm thick as per approved design with fixtures of 4 nos of 9" ' z" holdfasts, 250 mm long Al.aldrop-1 no,125mm long Al. butt hinges 6 No's, Door stoppers-1 no, 150mm long Tower bolts - 3no's Al. fancy handles 125mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) . Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket,wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqmupto 2.50 sqm).. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing skirting to internal walls to 12.50 cm height / risers of steps with ceramitilesthick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

White Washing Two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials for Ceiling and Internal Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying kniffing paste filler by putty knife/muslin pad, air dry for 2-3 hours, sand with 180 and 320 No, emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting to new walls with 2 coats of plastic emulsion paint of approved brand over primer coat with cement primer grade - I and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS-911 for all floors Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint 1st grade of approved brand and shade including cost and conveyance of all materials to site cost of primer coat and all Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and Fixing of MS Iron Grills including cost and conveyace of all materia and all labour charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting two coats with synthetic enamel paint first grade to primer coat on new Iron work using red oxide Iron primer paint grade - I including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and Fixing of 25mm dia 1.8mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and Fixing of 25mm dia 2.2mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. contract profit, overhead charges, But excluding GST and Seigniorage charges

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FRLS) P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe with 6A switch and Ceiling rose of make Anchor/ Gold Medal Olive/ Million Zoom and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings . Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes : Anchor / Gold Medal Olive /Million Zoom . Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) of make Anchor/ Gold Medal Olive/ Million Zoom on decolam sheet covered board including earth connection and all labour charges etc., complete on wall. . Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Supply and fixing of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan of make Crompton Decora/ Bajaj G Gold/ Havells Deco/ Usha Striker/ Orient PSPO. with 3 Blades and double ball bearings with all standard accessories and Stepped type electronic regulator of makes Miltec/ Vimal opel/ Maru Mantero/ Starex smile/ CPL. . Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for mains inlcuding all labour charges etc., complete.. Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Supply and run of 2 of 56/0.3mm (4 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for mains inlcuding all labour charges etc., complete.. Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for earth continuity including all labour charges etc., complete.. Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Supply and fixing of batten holder / slanting holder of make Anchor/ Gold Medal Olive/ Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb .. Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters. .. Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of 100 lumens/watt , PF0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. .. Including contract profit, overhead charges and Seigniorage charges, But excluding GST

Supply and fixing SPN Distribution board with IP-30protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.Including contract profit, overhead charges and Seigniorage charges, But excluding GST