Panchayat Raj Engineering Department Tender

Cost supply and fixing of GI pipe medium grade properites & weights as per IS 1239 with GI fittings such as elbows, Tees Couplings, Nipples, plugs including excavation for trenches and refilling trenches complete except for GI bends , unions and GI connectors with check out and socket etc -50 mm nominal bore GI pipe

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, complete for finished item of work. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST and seignourage charges as specified in Technical specifications including overheads and Contractor's profit @ 13.615%. 80mm Sluice valve/above 63mm up to 125mm HDPE main line

Cut opening of Cement Concrete road surface with concrete saw cutter and removal with breaker etc., including all charges compete, including overheads and controctor's profit @ 13.615% but excluding GST and seignourage charges

Manufacture, Supply & Delivery of MDPE Pipes conforming to IS 4427 part 2 of PE 80 grade material along with all fittings, including cost of all materials, manufacturing loading and unloading, stackong including transportation to anywhere in A.P, excluding all taxes - 20mm HDPE Pipe (Pipe series SDR 11) PN 16 pressure class

Laying and jointing of 20mm MDPE Pipe including trench excavation upto 0.6 mts depth including testing etc.,

Supply and Transportation of 2HP 5 Star rated Submersible motor pumpsets, confirming ot IS 8034 and Motor confirming to IS 9283 with water proof winding,pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240 V +/- 10%,Single phase 50 Hz AC supply,etc., complete for Bore well. Makes: As per list of recommended brands as category-I (MAT- 2HP, 25 Stage ((MAT-03653)) Cable jointing charges of the submersible motor, Supply of single phase pannel board suitable to 2-3 HP, 50mm HDPE pipe 10.0 Kg/cm2, Supply of SS and GI Nipple set, 50mm GI pipe, 50mm GI Nipples, 50mm GI Union (MAT-01837), 50mm GI Elbow, 50mm GM NRV, 50mm GM Gate valve, Bore cover, Supply of 3 core ......ISI marked flat Copper cable of ISI for submersible motors confirming to IS: 694:1990. Makes: As per list of ecommended brands as category-I (MAT- 2HP, 25 Stage ((MAT-03653))32A cutout, 7/20 Copper wire, GI wire, Shellock Bottels, Teflon Tape,PVC Insulation Tape, Labour charges for Errection. The scope including all labour charges,cost of all the materials to the extent of departmental satisfaction for finished item of work including Over heads and Contractor profit @13.615% but excluding GST.

Construction of Functional House Hold Tap Connections (FHTC) with PP Clamp Saddle ,Non return cum Flow control valve of 15 mm dia designed for 5 LPM discharge @0.5 bar pressure loss,Compression male/female threaded,cost and supply of 20 mm dia HDPE 16.0 Kg/cm2 (for a length of 3.0 Mts)with 20mm OD HDPE pipe, laying,jointing,trench excavation up to 0.5 Mts depth including testing,refilling,cost & supply of 15 mm dia GI pipe Medium grade ( for a length of 1.40 Mts) with necessary fittings,supply&fixing of 12.7 mm brass bib cock(long body) indian make heavy duty for finished item of work including cost,conveyance of all materials,labour charges etc with relevent IS codes,by using with food grade material suitable for usage in drinking water system to the extent of departmental satisfaction including Over heads and Contractor Profit@13.615% but excluding GST and Seignorage charges.