Panchayat Raj Engineering Department Tender

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Cost and supply of 175mm MS Clamp set

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Cost and supply of 175mm Bore Cover

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Cost and supply of 175mm MS Bail Plug

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Provision for Geological Survey Charges including all incidental charges, all labour charges etc complete, excluding taxes.

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation (Manualy) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 63 mm dia HDPE - 10 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Design, Supply, delivery, erection, testing and commisioning of pumping Machinery with all accessories, appurtenances, on common delivery main at each pumping station, piping as per design requirement and as directed by the department as per Technical specifications, as specified complete as specified in technical specifications and details as given below complete including trial run . The tenderer shall include provision for spares and for two (2) years maintenance in his quotation as specified in technical specifications No 37 (Part B of volume I).The scope of the work includes electrical switchgear panels, electrical equipment connections including required cabling from pump starter panel to transformers, vaccume pumpsets with necessary piping etc., for priming pumps, suitable cranes as per requirement, fire safety equipment, electrical safety system etc., for finished item of work including all taxes, duties etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Earthwork excavation in all type of soils with initial lead and lift etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Filling of foundation with sand including cost, conveyance, watering and ramming etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;CC (1:4:8) using 40mm HBG metal including cost and conveyance of all materials etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;RCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials but excluding cost of the steel etc. complete for Raft and footings

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;RCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials but excluding cost of the steel etc. complete for Plinth beam

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;RCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials but excluding cost of the steel etc. complete for columns

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Brick Masanory with CM (1:6) using second class bricks including cost and conveyance of all the materials etc. complete Basement

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Brick Masanory with CM (1:6) using second class bricks including cost and conveyance of all the materials etc. complete for Superstructure

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;RCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials but excluding cost of the steel etc. complete for lintel beams

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;RCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials but excluding cost of the steel etc. complete for Sun shades

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;RCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials but excluding cost of the steel etc. complete for Beams

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;RCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials but excluding cost of the steel etc. complete for 125mm thick Roof Slab

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Accoproof plastering with CM (1:3), 12mm thick including cost and conveyance of all materials etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Cement Plastering with CM (1:5), 12mm thick including cost and conveyance of all the materials etc. complete for side wall out side, inside and ceiling

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Flooring with CC (1:4:8) using 40mm HBG metal for 100mm thick and top plastering with CM (1:3), 20mm thick including cost and conveyance of all materials etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Painting with White Cement two coats including cost and conveyance of all materials etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Snowcem painting including cost and conveyance of all the materials etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Synthatic Enamel painting over primary coat and enamel painting in two coats including cost and conveyance of all materials etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Supply and placing of the HYSD bars, fabrication including cost and conveyance of all the materials etc. complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Construction of 30 KL capacity OHSR of 9.45 mts staging at YSR Colony in Kadiapusavaram Village with M30 grade design mix at the site selected by the Department, as per drawings and as specified in Technical Specification including earth work excavation in all types of soils in wet or dry conditions for foundations including cost and conveyance of all materials, cost and fabrication of steel, fixtures, labour charges and testing the reservoir for water tightness etc., complete for finished item of work as per the Standard Specifications and as per the provisions made in the SOR 2021-22. The rate is inclusive of cost of all materials and labour charges and all taxes, duties and levies, etc., complete for finished item of work, but excluding GST and Seigniorage charges, including Overheads and Contractors Profit @13.615%. 1). All concrete members shall be designed with M30 grade design mix. 2) Rate is for OHSRs with RAFT FOUNDATION 3) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including bottom of roof. 4) Rate inclusive of 2 coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections including cost of pipes, bends and valves as per departmental designs and drawings. 5) The above rates are applicable for basic wind speed of 150 KMPH . Fixtures include : a) RCC or Aluminium ladder inside 0.60 m wide. b) Spiral staircase on the outside shall be provided upto 200 KL. c) Lightening arrestor, including conductor and earthling etc.,d) RCC ventilators with copper or stainless steel fly proof mesh. e) D.I Manholes frame and cover 0.60x0.60m as per IS specifications (light duty) - 2 Nos. f)Water level indicator of good quality with ebonite/copper float of approved pattern-1 No. g) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1.20m. i) D.I swan neck ventilators shall be provided in top dome and slab. j). Bed Blocks of 0.45m x 0.45m x 0.30m in CC M15 Mix below all the duck foot bends k) The rates are inclusive of CI verticals for all inlet, out let, overflow and scour connections( as per estimate diameters) and D.I valves. All valves near inlet, out let and for scour shall be D.I valves of heavy duty conforming to the specification of SoR item No.30

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation (Manualy) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 75 mm dia HDPE - 6 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation (Manualy) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 90 mm dia HDPE - 6 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation (Manualy) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 110 mm dia HDPE - 6 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves 100 mm dia Sluice Valves (PN-1.6) with Body and Bonnet of Ductile Iron as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 . supply of Sluice valve ,DI Specials to suit the pressure class of pipe, fixing with all fixtures and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work including contractor profit 13.615% but excluding GST 100 mm dia Sluice Valves on 110 mm dia line

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves 80 mm dia Sluice Valves (PN-1.6) with Body and Bonnet of Ductile Iron as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 . supply of Sluice valve ,DI Specials to suit the pressure class of pipe, fixing with all fixtures and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work including contractor profit 13.615% but excluding GST 80 mm dia Sluice Valves on 90 mm dia line

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Supply delivery of DI scour valve(PN-1.6MPa) arrangement on pipeline including supply of valve with dismantling joint,DI specials to suite pressure class of main line etc including supply of valve ,DI Specials to suit the pressure class of pipe, fixing with all fixtures and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST - 80mm dia on 63-125mm dia line

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Cutting open C.C. road surface with concrete saw cutter and removal with Breaker etc including all charges etc complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;VCC (1:2:4) prop using 20mm gauge HG metal including cost and conveyance of all materials and labour charges ,seign. charges etc.complete. For restoration of CC Road

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Horizontal Auger drilling for pipe line crossings at Road junctions inluding all materials and labour charges etc complete

AUGMENTATION OF EXISTING WATER SUPPLY SCHEME AND PROVIDING FHTCS;Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%.