Panchayat Raj Engineering Department Tender

Supply fixing of PVC taps including cost and conveyence of all materiels and labour charges etc.

Earth work excavation in all type of soils with intial lead and lift etc complete For Intial

Earth work excavation in all type of soils with intial lead and lift etc complete For 2nd Mattu

CC (1:4:8) using 40mm HBG metal inlcuding cost and conveyance of the all materials etc complete.

Filling the foundation with sand inlcuding cost and conveyance of the all materials etc complete.

M30 grade concrete using 20mm HBG metal including cost and conveyance of the all materials etc complete. For Bottom raft.

M30 grade concrete using 20mm HBG metal including cost and conveyance of the all materials etc complete. For Side walls.

M30 grade concrete using 20mm HBG metal including cost and conveyance of the all materials etc complete. For Top slab with 0.15 thickness.

Accoproof plastering with CM(1:3), 12mm thick including cost and conveyance of the all materials etc complete. For Top of the slab, side wall inside, Bottom slab.

Cement plastering with CM(1:3), 12mm thick including cost and conveyance of the all materials etc complete.

Snowcem painting including cost and conveyance of the all materials etc complete.

Supply and placing of the HYSD bras, fabrication including cost and conveyance of the all materials etc complete.

Man hole covers including cost and conveyance of the all materials etc complete.

Supply and Transportation of 3 HP/5-10 stage,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proofwinding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well

S& F 32 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete. for Scheme source

Supply of 3 Core 2.50sqmm Flat Copper cable of ISI for Submersible Motors including cost and conveyance of the all materials etc complete.

Labour charges for erection of three phase submersible pump sets (Bore well type) 3 HP pump sets including pipe connection for suction and delivery and all labour charges etc., complete

Supply of 56" (1400mm) Sweep Ceiling Fan, with double ball bearings, but without Regulator. Makes: As per list of recommended brands MAT 03602 ELEC 5.1.5

2 Module Modular type electronic step type Fan Regulator MAT 02846

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 -260 Volts, having luminous efficacy =90 lumens/ watt, with PF0.9, surge protection: 2KV, THD10%, with inbuilt driver and frosted cover CCT: 3000K 5700K, minimum CRI70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category II

Supply and transportation of 120W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I MAT 03365

Supply and delivery of Galvanized Iron fly proof wire mesh of not less than 20 gauge including Cost and connivance of material etc complete. MAT-00884

Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 40 mmthick conforming to IS:2202 MAT-01347

Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 40 mmthick conforming to IS:2202 MAT-01347

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time. Drilling of Bore well 165 mm dia upto 90m`depth

Cost and supply of 175 mm dia PVC Blue casing pipe

RCC (1:2:4) for 125mm thick roof slab corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work

Providing impervious coat to exposed RCC roof slab surface with CM (1:3) 20mm thick with 1 kg of water proof compound per bag of cement laid including laying, thread lining, curing, rounding of junctions of wall and slab ete., complete

Cement Concrete (1:2:4) using concrete mixer with 20mm HBG M/C Metal including cost and conveyance of all materials and all labour charges etc., complete for plain works.