Panchayat Raj Engineering Department Tender

RCC. M-20 Nominal Mix (Cement fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.complete but excluding cost of steel and its fabrication charges for finished item of work, for Columns Footings

RCC. M-20 Nominal Mix (Cement fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.complete but excluding cost of steel and its fabrication charges for finished item of work, for PEDASTALS

RCC. M-20 Nominal Mix (Cement fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.complete but excluding cost of steel and its fabrication charges for finished item of work, for COLUMNS

Random Rubble Masonary in CM(1:6) including cost and conveyance of all materials and labour charges etc., complete

RCC. M-20 Nominal Mix (Cement fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.complete but excluding cost of steel and its fabrication charges for finished item of work, for All round the building

Brick masonary in super structure with tradational bricks23x11x7 Cm in CM (1:8) prop mixing cement mortor constructing masonary scaffolding charges lift charges cutting etc complete for finished item of work

R.C.C. M-20 Nominal Mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site and including Seigniorage charges, sales & other taxes on all materials including all operational, Incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, for LINTELS

R.C.C. M-20 Nominal Mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site and including Seigniorage charges, sales & other taxes on all materials including all operational, Incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, for SUNSHADES (of 0.60 mts wide and 0.075mtr thick at fixed end and 0.060mtr thick at free end)

R.C.C. M-20 Nominal Mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site and including Seigniorage charges, sales & other taxes on all materials including all operational, Incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, for ROOF LEVEL BEAMS

R.C.C. M-20 Nominal Mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site and including Seigniorage charges, sales & other taxes on all materials including all operational, Incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, for ROOF SLAB 110MM THICK

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work for OVER ROOF SLAB.

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:6), 8 mm thick and top coat in CM (1:3), 4mm thick with Dubara sponze finishing for Inside and Out side the building

Omamental Plastering to Ceiling with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing including cost and conveyance of all materials and labour etc., complete for finished item of work

Flooring with high polished granite 16 to 18 mm thick stabs other than black set over base coat of cement mortar (1;B) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including sergniorage charges, labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials

Providing skirting to internal walls to 15 cm height/risers of steps with marble slab mm thickness, length equal to flooring stones, set over base coat of CM (1-3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like marble slab, cement, sand and water etc, complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Painting with weather proof plastic emulsion Grade-I paint to exterior faces of walls with two coats ove a cement primer coat of approved make shade and colour including seif primer coat including cost and conveyance of all materials like plastic Emulsion paint of grade-I to site including cost of brushes, scaffolding charges, lift charges and all labour charges such as preparing the wall applying two coats etc.. complete for finished item of work in all floors (APSS No. 910,911)

Supplying and fixing of for Doors 1.2\times2 2.10mtrs with grill with all necessary fittings including cost and conveyance of all materials and labour charges etc.

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows two track sliding duly manufactured using UPVC reinforced profiles of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.0 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 12 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick Tinted glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work

Supply and fixing of Door 1.20 X 2.10 mts size with Frame of factory made solid wood Polymer Composite section (WPC) of size 100X 63.50 mm size and door shutter also of WPC shutter Frame 28-30mm thick including fixing of 2 Nos of verticals and 1 Nos of Horizontals of size 100X 75 mm including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Alluminium Butt Hinges, 2 Nos of 150mm long Alluminium Towe Bolt, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos of 150mm long Alluminium Door Handles, 1 Nos of 300mm long Alluminium Aldrop, 1 Nos of Alluminium Door Stopper and 1 Nos of Nylon Rubber including cost and conveyance of all materials and labour charges

Painting, Priming Coat on New Iron Work with two coats of ready mixed synthetic cement paint first quality all shade over a base coat of metal primer making three coats of wood primer making three coats in all to give an even shade after throughly brushing the surface to remove all remains of loose powdered materials including c/c of all materials site and other taxes, alloperational and labour charges etc complete for finished item of work in all Windows Ventilators

Providing high yeild deformed (HYSD) steel bars (Fe 415 grade IS 1786- 1985) of 8mm to 40 mm diameter cutting, bending and binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work with all taxes complete for finished item of work (APSS No. 126) in all floors labour charges for cutting, bending to required size and shapes placing in positining with cover blocks of forming grills for reinforcement work as for approved desion and drawing high yield strength deformed (hysd) steel bars to 40 mm diameter, in all floors(cssr)