Panchayat Raj Engineering Department Tender

Road Work;Providing concrete for plain concrete M15 grade in open foundation using 40 mm size HG machine crushed metal(SS-5) using mechanical mixture including cost,conveyance of all materials from approved sources and all labour charges for mixing of concrete,laying concrete in layers,compacting,curing for 14 days etc. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.,including overhead charges & Contractors profit but excluding seigniorage charges and GST complete for finished item of work as per standard specifications.

Road Work;Providing and laying reinforced cement concrete R.C.C M 25 grade using 40,20 & 10mm metal mechanically mixed in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including overhead charges & Contractors profit but excluding GST.

Road Work;Providing and laying reinforced cement concrete R.C.C M 30 grade using 40,20 & 10mm metal mechanically mixed in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including overhead charges & Contractors profit but excluding GST.

Road Work;Supplying, fitting, and placing HYSD bar reinforcement (Fe 415) in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MORD / 1600 MORTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including overhead charges & Contractors profit and GST

Road Work;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS : 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (laying and fixing of 125 micron thick polythene film, wedges, including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion and construction joints, applying debonding strips, primer, sealant, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit but excluding GST and seigniorage charges