Panchayat Raj Engineering Department Tender

Supply and Transportation of 5.00 HP Three phase ISI self priming Mono Block IP44 motor pumpset .Makes: As per list of recommended brands as category

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V, 0 to 20 Amps / 0 50 Amps Ammeter, Single phase preventor of suitable range, 32 A TP, 10KA MCB, Indication lamps (R-Y-B) with switch control - 1set, Voltmeter & Ammeter selector switch - 2 Nos, Supply and fixing of ISI Mark suitable capacitor Makes for 7.50 HP with Star- Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH.excluding all taxes etc complete. up 7.50 Hp to 12.5 Hp

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V, 0 to 20 Amps / 0 50 Amps Ammeter, Single phase preventor of suitable range, 32 A TP, 10KA MCB, Indication lamps (R-Y-B) with switch control - 1set, Voltmeter & Ammeter selector switch - 2 Nos, Supply and fixing of ISI Mark suitable capacitor Makes for 7.50 HP with Star- Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH.excluding all taxes etc complete. for 15 HP with Automatic Star Delta Starter

Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor upto 7.50 HP with DOL Starter

Supply & Fixing of 3 Core 4mm 2.5 Sqmm Flat Copper cable of ISI for Submersible Motors of makes Finolex / Polycab / Gold Medal excluding all taxes etc complete.

Supply and Fixing of 80 mm dia B'Class Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent

Supply and delivery of 80mm dia "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.