Panchayat Raj Engineering Department Tender

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame (BMT-N.92), with all fixtures Aluminium Tower Bolt 200mm, Aluminium Aldrop 300 mm long,Aluminium Door Handles 150 mm Long andvHeavy duty Aluminium Door stopper Including Overheads and Contractors profit but excluding GST complete for finished item of work (Shutter only), dour of size 1.20x2.10Mts with Double shutters

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame (BMT-N.92), with all fixtures Aluminium Tower Bolt 100mm, MS-Powder Coated Aldrop 200 mm long,MS-Powder Coated Door Handles 125 mm Long and Including Overheads and Contractors profit but excluding GST complete for finished item of work (Shutter only) For Shutters of Sizes upto 1.50 Sqm with Single Shutter, Toilet Doors

Providing and fixing 30mm thick BRAND FACTORY MADE WIRE MESH SOLID PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mmX19mm for stiles and 15mm for top, lock & bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. 19mmX19mm M.S. square tubes shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be flat and 15mm shall be bent in 900 on the inner side to from top and bottom rail land 130mm wide PVC sheet out of which 100mm shall be flat and 154mm shall be bent in 900 on both side to from lock rail, 10mm(5mmX2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panel will be of G.I.wire mesh of 24gauge to be fitted in by ’C’ channel of size 35mm X10mm on the either side in the stiles. The inner side ‘C’ channel is fixed by 19mmX19mm MS. Tube on both sides with screws. The wire mesh in top bottom & lock rail is sealed with15mm X 15mm tube with G.I.wire 10mm(5mmX2) thick PVC strip of 25mm width is to be stuck& nails on both side of G.I. wire mesh interior at the top, bottom & lock rail. An additional 5mm thick PVC srip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawings Including Overheads and Contractors profit but excluding GST complete for finished item of work (BMT-N.08)

Flush window shutters with solid bond wood block board type with commercial ply on both faces.: 25 mmthick conforming to IS:2202 including all fixtures Including Overheads and Contractors profit but excluding GST complete for finished item of work Including Overheads and Contractors profit but excluding GST complete for finished item of work Shutter for window shutter upto 0.50 Sqm size (Shutter only)

Painting to New Wood work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of wood primer making three coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powderedd materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work for external walls. (APSS No.1201, 1207 & 1212)(CSSR) for Windows

Painting to new walls and ceiling in two coats with Plastic Emulsion Paints Asian/ Berger/ Nerolac or equivelent and shaded over Priming Coat with Cement Primer water base interior Gr -1 or equavalent quality to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including cost and conveyance of all materials and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting, curing etc., complete for finished item of work for internal walls. (APSS No.901 & 908)

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)

Providing and fixing of Stainless steel fly proof wire mesh of not less than 20 gauge for windows Including Overheads and Contractors profit but excluding GST complete for finished item of work

Providing mild steel flats and bars for fabricating steel works like window grills, compound wall grills, iron doors, windows designs and drawings including cost of welding rods, power charges , including cost of fixing in position as per approved designs and drawings including cost and conveyance of bars forom aproved sources tosite of work, all operatinal,incidental,and labour charges such cutting ,bending, placing in position etc.,and sales and other taxes, on cost of all materials finished item of work (APSS No.126) in all floors. for window grills ,stairecase railling & compound wall grills etc complete excluding GST and including overhead charges.

Painting to new iron work with two coats of ready mixed first quality synthetic enamel paint of approved brand and shade over primary coat of red primer grade I making three coats in all to given an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost conveyance of all materials , cost of brushes, water to site ,etc., but excluding GST and including over head charges complete for finished item of work in all floors (APSS No. 1201&1208)

Plain Cement concrete (1:4:8) using 40 mm HBG Metal from approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site (Hand Mixing), complete for finished item of work for Foundations and flooring bed (APSS No.402)(CSSR) but excluding GST and including over head charges complete for finished item of work for flooring bed

Supply and Fixing of ISI 25mm outer dia mediumgrade (1.8mm thick), FRLS with IS:9537 part 3 regid PVCpipe. (ISI MARK) concealed in wall with all required accessories including masonary work including all labour charges etc., complete. Make:Makes : Sudhakar / GM / Modi / AKG / VIP / Million Plast.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) FRLS /HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable(Phase, Neutral & Earth) in existing pipe with 6A 1 way modular switch, Ceiling rose and 6 modular cover frame covering to 6 modular G.I Box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Makes: Wire=Finolex / RR kabel / Havells and Switch = GM-Zenova / Legrand Arteor / Schneider Zen celo / Goldmedal(i-Push).

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size 1.5 x 0.6 x 0.9 m, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan with Regulator with all standard accessories of makes Makes : Crompton HS Decora / Bajaj Regalstar / Havells Fusion 50 / Orient SummerCrown / Usha technix decorative

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded alluminium housing andbatten light with extruded alluminium housing and batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Voltswith PF0.9, Surge protection: 2KV,THD15%, withinbuilt driver and frosted cover CCT: 3000K - 5700K,minimum CRI70, .etc., complete.Makes : Surya /C&S/ Fortune Art / Syska / Enrich /Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/Orbit/Panasonic/Trinic/Lumenb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA

Supply of LED Lamp with input voltage 90 to 300V, Color temperature3000k - 6500k, Beam angle 170 - 220 degrees, B22 base. Makes: As per list of recommended brands.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost of conveyance of all materials and labor charges, complete for finished item of work.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) Including Overheads and Contractors profit but excluding GST complete for finished item of work 22.20MM OD pipe

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) Including Overheads and Contractors profit but excluding GST complete for finished item of work 15.90MM OD pipe

Supply and Fixing of 12.7mm N.P bib tap Indian make heavy duty sort body Including Overheads and Contractors profit but excluding GST complete for finished item of work

Supplying fixing 75mm dia -3m. Single Socket PVC/SWR 4kgs/cm2 prince/sudhakar or any ISI Brand Including Overheads and Contractors profit but excluding GST complete for finished item of work

Supplying fixing 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm prince/sudhakar or any ISI Brand Including Overheads and Contractors profit but excluding GST complete for finished item of work

Cleaning the W.C with acid and Vim powder including all labour charges for deep cleaning complete Including Overheads and Contractors profit but excluding GST complete for finished item of work

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality confirming to IS:2556-Part-4:1972 with waste fittings like rubbe plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior / Nice / Esso or equivalent complete with standard CI brackets including wooden block: including cost of 50mm dia pvc pipe, 12.7mm PVC connection with brass union nut C.P. coated and concealed stop cock 12.7 mm (1/2") etc complete for 550 x 400 mm - Single C.P Pillar cock

Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 15mm PVC connection with brass plumber union nuts CP coated, 15 mm brass body CP finish self closing tap push type conforming to IS 1711, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors.

Supply and Transportation of 1 HP 10 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: As per list of recommended brands as category I.