Panchayat Raj Engineering Department Tender

RWS S;Conducting yield test by hiring 5 HP electric / Oil engine motor including hire charges, fuel charges, wages of driver and helper., crew charges, cost of consumables, transportation to work spot etc., complete.

RWS S;Add over head & Contractors profit at 13.615% (Sl.No. 1 to 4 - Rs.99297/-)

RWS S;Supply and Transportation of 5.00 HP 5 Star rated Submersible Motor Pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415 V ± 10%, Three phase 50Hz AC supply, etc complete for 6" Bore well - 5.00 HP, 5 - 10 Stage - ELEC - 5.4.5 (b) Makes : Kirloskar / Crompton / Texmo / CRI / KSB / Lubi / PSG / Aryen Varsha ELEC - 5.4.5

RWS S;Fabrication, Transportation and supply of wall mounted Control Panel Board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc., complete for 3 phase motor pumpsets - ELEC - 5.4.17(b). (1) Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No. (2) 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size) Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1 No. (3)32 A TP, 10KA MCB, Makes: Legrand / Schneider / - 1No Indication lamps (R-Y-B) with switch control - 1set, Voltmeter & Ammeter selector switch - 2 Nos, Supply and fixing of ISI Mark suitable capacitor Makes:L&T / Siemens / Schneider / Epcos/Havells. Upto 7.5 HP with DOL Starter of Make C&S.Crompton / L&T / Siemens/BCH, Delta starter of Make C&S Crompton / L&T / Siemens / BCH

RWS S;Cost and supply of 50mm dia GI pipes "B" Class

RWS S;Cost and supply of 50mm dia GI heavy couplings

RWS S;Cost and supply of 50mm dia MS Flange sets

RWS S;Cost and supply of 50mm dia MS Clamp sets

RWS S;Cost and supply of 50mm dia CI Non Return valve

RWS S;Cost and supply of 2.50Sqmm 3 Core Flat Copper cable as per IS : 694:1990

RWS S;Cost and supply of 7/16 service wire

RWS S;Cost and supply of 180mm dia PVC bore cap

RWS S;Cost and supply of 75mm dia PVC FTA

RWS S;Labour charges for fixing of 5.00 HP / 3 Phase Bore well submersible pumpset with all accessories ELE.1.6.11

RWS S;Add over head & Contractors profit at 13.615% (Sl.No. 6 to 17 - Rs.87135/-)

RWS S;Earth work excavation by 1/3 manually and 2/3 by machinery and depositing on bank with an intial lead and lift in loamy and clayee soils for pipeline trench of size 0.70x 1.00 m including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 75mm dia 6kg/cm2 PVC pipes with necessary jointing materials, testing the pipe line to the standard water pressure and refilling the trench with excavated soils to the original surface level etc., complete including Over heads & Contractors profit at 13.615%

RWS S;Manufacture, Supply & Delivery of PVC 75mm dia 6kg/cm2 PVC pipes for Potable water supplies confirming to IS 4985/2000 (3rd Rev) with Bell ends (socket) as per specifications in light grey / Natural ivory grey / any other Colour (except white) inclusive of transportation, excluding GST (including Contractor profit @ 13.615%)

RWS S;Providing House hold service connection from nearest distributions line using following items 1. Earth work excavation for structures as per drawings and technical spefications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50m dressing of sides and bottom and backfilling in trenches with excavated suitable materials as per Technical Specification 305 MORD / 304 MORTH - 51.80 Cum 2. 75mm dia PVC Service Saddle - 37 Nos. 3. 20mm dia GM Ferrule - 37Nos 4. 20mm dia GI couplings - 74 No 5. 20mm dia PVC 0.45M nipples - 37Nos 6. 20mm dia PVC 0.15M nipples - 37Nos 7. 20mm dia PVC Elbows - 111Nos 8. 20mm dia PVC MTAs - 74 No 9. 20mm dia 10KG/cm2 PVC - 111Rm 10.20mm dia CI Taps - 37Nos 11.Labour charges for fixing of house hold connections with true to alignment of PVC pipes, GI pipes and its seciaks (including contractor profit @ 13.615%) -- 37Nos