Panchayat Raj Engineering Department Tender

Building Work;VRCC M25 Nominal mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site and including seigniorage charges, sales & other taxes on all materials including all operational, incidental and labor charges such as machine mixing , laying concrete, curing etc, complete but excluding cost of steel and its fabrcation charges including contractors profit for finished item of work for Plinth Beam

Building Work;VRCC M25 Nominal mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site and including seigniorage charges, sales & other taxes on all materials including all operational, incidental and labor charges such as machine mixing , laying concrete, curing etc, complete but excluding cost of steel and its fabrcation charges including contractors profit for finished item of work for Columns

Building Work;Brick Masonry With CM (1:8) prop (cement:Sand) using country bricks 23 x 11 x 7 cm from approved quary having compressive strength of not less than 35kg/sqcm including cost and conveyance of all materials like cement, sand, bricks, wate etc, to site and sales & other taxes on alll materials, including mateirals, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scafforliding charges, lift charges, curing cahrges, etc, for the work for Superstructure

Building Work;Ornamental Plastering 8 mm thick in single coat in CM(1:3) with dubara sponge finish including cost and conveyance of all materials like cement, sand, water tc, to site seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffoliding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing etc for finished item of work (APSS901,903 & 904)

Building Work;Plastering 12 mm thick in single coat in CM(1:5) with dubara sponge finish including cost and conveyance of all materials like cement, sand, water tc, to site seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffoliding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing etc for finished item of work (APSS901,903 & 904)

Building Work;Plastering 12 mm thick in 2 coats, Base coat in CM (1:4) to 8 mm Thickness and top coat in CM (1:2) to 4mm thickwith dubara sponge finish including cost and conveyance of all materials like cement, sand, water tc, to site seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffoliding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing etc for finished item of work (APSS901,903 & 904)

Building Work;Providing HYSD steel bars (Fe-500) grade asper IS 1786-1985) of 8mm to 40mm diameters cutting, bending to required sizes and shapes placing in position with cover blocks of approved sizes and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and coveyance of binding wire and all labour charges, such as cutting, bending, placing inpostion, tying etc and sales tax etc including contractors profit for finished item of work (APSS No. 126)

Building Work;Painting to new walls with Two Coats of White Cement of approved brand and shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including contractors profit but excluding GST to complete for finished item of work For Internal and External Walls

Building Work;Painting to new walls with single coats of Two coats of Plastic Emulsion Paint of approved brand and shade over single coat of Cement Primer Grade I of approved brand and shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including contractors profit but excluding GST to complete for finished item of work For Internal Walls

Building Work;Flooring with NANO POLISHED STAIN FREE SOLUBLE SALT PORCELAIN VITRIFIED TILES OF SIZE 600x600 of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including contractors profit but excluding GST to complete for finished item of work BMT-C.07

Building Work;Providing Skirting to internal walls to 15 cm height/risers of steps with NANO POLISHED STAIN FREE SOLUBLE SALT PORCELAIN VITRIFIED TILES OF SIZE 600x600 length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including contractors profit but excluding GST to complete for finished item of work BMT-C.07

Building Work;Flooring with NON PORCELAIN CERAMIC FLOOR TILES with Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300 mm and thickness between 7-8 mm, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including contractors profit but excluding GST to complete for finished item of work BMT-C.01

Building Work;Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm

Building Work;Cost and supply of Cement Jali 50 mm Thickness including cost and coveyance of binding wire and allLabour charges including contractors profit for finished item of work (APSS No. 126)

Building Work;Supply and laying of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 regid FRLS PVC pipe consealed in wall with PVC junction boxes and all required accessories including masonary work for light, fan and separate plug point with fixing of suitable size well seasoned wooden deep box / Metal deep box / Modular deep box including all labour charges etc., complete.Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Anchor/ Polyline/ Polycab/Orbit/ AKG including cost of all materials like Shahabad stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work